DEPFiberglassServicebodies-SRW.xls
XLS spreadsheet 23 KB Posted
- Attached to
- DEP Fiberglass Bodies-SRW
- Solicitation number
- RFQ - 18P - 10060900000000001182
- Issued by
- Kennebec County, Maine
About this file
This is a specification document for a composite fiberglass service body procurement by the State of Maine Department of Environmental Protection (DEP). The specification details the requirements for a heavy-duty fiberglass composite service body with canopy designed for installation on a 2011 Ford F350 Super Duty Cab & Chassis, single rear wheel configuration. The body dimensions are 108 inches in length, 78 inches in width, and 60 inches in height with interior headroom. The procurement calls for bidders to provide unit pricing and total costs, with the possible quantity listed as two units. Vehicle pickup and installation are to occur at a location in Augusta, with the completed vehicle returned to CFM (Configuration Fleet Management) in Augusta as part of the bid submission.
The specification establishes minimum construction standards requiring fiberglass composite material throughout with steel understructure, a 1/8-inch steel treadplate floor, and fully undercoated steel wheel well liners. All exterior hardware, including latches, hinges, and latches, must be stainless steel. The body includes multiple compartments with specific layouts for street and curb sides, galvanized shelves rated for 250-pound capacity, and comprehensive lighting including FMVSS-compliant packages with strobes and flood lights. Exterior finish is specified as Ford paint code "84S53" in School Bus Yellow with white or reflective gray interiors. Additional requirements include an 8-inch steel treadplate step, Class IV drop receiver hitch with 7-way RV trailer connector, backup alarm, and DOT safety kit. The specification prohibits use of "Scotch-Lok" style connectors, requiring instead heat shrink-sealed electrical connections with heavy-duty wire loom protection.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation_terms.doc | DOC document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| SPEC# 2010DEPFIBERGLASS-SRW | COMPOSITE FIBERGLASS SERVICE BODY | ||||||
| GENERAL DESCRIPTION | Heavy duty fiberglass composite service body with canopy for single rear wheel. All stainless steel latches, hinges, and hardware. | ||||||
| MINIMUM SPECIFICATIONS | |||||||
| APPLICATION | 2011 Ford F350 Super Duty Cab & Chassis, SRW, Super Cab, 4X4, 6.7 Litre Diesel, 11500GVW, 162" WB, cab to axle: 60" | ||||||
| BODY SIZE | Length: 108" Width: 78" Height: 60" inside head room | ||||||
| BODY SHELL & FLOOR | Fiberglass composite construction throughout, steel understructure, 1/8" steel treadplate floor, 3/16" smooth aluminum header panel, 3/16" aluminum tail skirt, fully undercoated, undercoated steel wheel well liners, aluminum rock guards at front of body. Aluminum or stainless steel roof racks supplied w/fasteners, loose in body. | ||||||
| WEATHER STRIPPING | Heavy duty, closed cell automotive type | ||||||
| CANOPY | Fiberglass composite canopy roof, full width, with double rear doors and aluminum bulkhead (if available). 1 Fixed shelf on both street and curb sides, 2" retainer on top of compartment both street and curb sides | ||||||
| EXTERIOR COMPARTMENTS CONSTRUCTION | Vinyl covered stainless steel cables on all doors. 4 over center door checks. Non-skid compartment tops. One-piece molded doors with auomotive finish both sides. Recessed door jambs. Shelves to be 18 gauge galvanized, hemmed, rated for 250lb. capacity, with twenty shelf dividers. Master rod lock system. Flow thru ventilation system. Drains in all compartments. Note-All stainless hardware latches, hinges, & hardware!! | ||||||
| EXTERIOR COMPARTMENTS LAYOUT | Front compartment= Transverse open both sides, 1 drawer pull 2 way, full length. Street Side: Standard Horizontal compartment over wheel well with one adjustable shelf. Standard rear compartment with one adjustable shelf. Curb Side: Long horizontal compartment with one adjustable shelf. Short rear Compartment with one adjustable shelf. | ||||||
| LIGHTS | FMVSS lighting package. Quick connect loomed wiring harness. Flush mounted tail and backup lights, clearance lights and reflectors. License plate light with bracket. 3 piece switch panel in cab, 2 interior roof dome lights with a switch in cab panel, 2 "V-head" amber strobes mounted on upper rear sides of canopy and 2 hide-a-way amber strobes mounted in front lights operated by a power supply with a switch in cab panel, 50 watt rectangular halogen flood light mounted over center high mount brake light with switch in cab panel. | ||||||
| PAINT | Exterior Ford paint code "84S53, Code M6284F" (School Bus Yellow) Gelcoat. All interior compartments color to be white or reflective gray. | ||||||
| BUMPER & TRAILER HITCH | 8" steel tread plate step, class IV drop reciever hitch | ||||||
| FUEL FILL CONE | Aluminum for F350 single rear 40 gal. tank-aft.axle, marked "Diesel Fuel Only". | ||||||
| INSTALLATION | Vehicle to be picked up at our location in Augusta, items installed, and vehicle returned to CFM in Augusta. (Please include in bid!!) All electrical connections to be sealed with heat shrink and fully protected with heavy duty wire loom. Absolutely no "Scotch-Lok" style connectors | ||||||
| ACCESSORIES | Back up Alarm, DOT safety kit, 2)wheel chocks, 7 way RV style trailer connector. | ||||||
| MAKE | Model | ||||||
| Possible Quantity | Unit Cost | Total Cost | |||||
| 2 | |||||||
| Bidder (Vendor) | Contact Person | Contact's Telephone | |||||
| VENDOR COMMENTS | |||||||
| ESTIMATED TIME FOR DELIVERY: |
Sheet2
Sheet3
File details come from the government source that posted it. Updated .