DEP Spec 2.xls

This is a specification sheet for a cab and chassis truck procurement for the State of Maine Department of Environmental Protection (DEP) under a master agreement. The specification details requirements for a single rear wheel, 4-wheel drive extended cab truck with a 168-inch wheelbase and 60-inch cab-to-axle length, powered by a minimum 6.4-liter displacement gasoline engine paired with an automatic transmission of at least 8 speeds. The vehicle must be equipped with specific safety features including dual airbags, backup camera with factory hardware integration, and a rear backup alarm if available. Additional mandatory features include electronic locking or limited slip rear axle with 4.30 ratio, heavy-duty engine cooler, block heater, cruise control with steering wheel controls, power windows and locks, factory-installed fog lamps, running boards, tilt steering wheel, and a towing package with integrated brake controller and 7-pin wiring harness. The truck must also include a minimum 350-amp alternator, dual batteries with at least 600 CCA, 40-gallon fuel capacity, 11,500-pound GVWR, and be painted white with LT 275/70R 18 all-terrain tires in load range E.

The specification sheet includes a pricing table where bidders are to provide unit costs for vehicles being bid, with sections for color options and any additional charges for non-standard colors. The document requests that bidders identify the year, make, and model of the vehicle proposed, along with contact information for the vendor and bidder representative. Bidders must also provide specific technical details including engine displacement, axle ratio, battery CCA rating, wheel base confirmation, fuel capacity, GVWR, and tire specifications. The sheet indicates that orders for trucks meeting these specifications can be placed through the master agreement, though the specific ordering process and pricing terms are not fully detailed in the provided excerpt.