Data Requirements SPMYM326Q4032.pdf
PDF 203 KB Posted
- Attached to
- Welding Rod
- Solicitation number
- SPMYM326Q4032
About this file
This document is a Contract Data Requirements List (CDRL) presented as DD Form 1423 (mechanized equivalent), establishing mandatory data submission requirements for a federal contract involving welding materials.
The CDRL specifies two data requirement items for the contractor. Item A001 requires submission of a Certificate of Compliance for bare welding rods, referencing contract paragraph C.4.1 and DID number DI-MISC-81356A. This certification must be submitted one time with the material and distributed per section 133.2. Item A002 requires Material Certification for electrodes, referencing contract paragraph C.4.2 and DID number DI-MISC-80678, with similar one-time submission and distribution requirements. Both certifications must include technical content as described in the respective contract line items and must contain actual test results of all chemical and mechanical tests required by applicable specifications, expressed in quantitative units as specified. The remarks section for the electrodes certification specifies that certain paragraphs of DI-MISC-80678 do not apply and that the requirements of the contract section titled "Marking and Certification Requirements for Controlled Industrial Material" also apply. All data submissions must be made under separate shipment numbers, with payment and submission governed by FAR clauses 252.232-7006, 252.232-7003, or 52.232-36. The CDRL was printed on June 27, 2025, and is designated as Exhibit A to contract 3439 D26.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFQ SPMYM326Q4032 Revised to LB.docx | DOCX document | |
| RFQ SPMYM326Q4032.docx | DOCX document | |
| Attachment 1 - Specifications SPMYM326Q4032.pdf | ||
| Combined Synopsis Solicitation Rod Welding SPMYM326Q4032.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
3439 D26 EXHIBIT A
SYSTEM/ITEM BARE WELDING ROD
ITEM NO
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 6/27/2025
CONTRACT DATA REQUIREMENTS LIST
01 SEQ NO A001
02 DATA DESC CERTIFICATE OF COMPLIANCE
03 SUBTITLE CERTIFICATION DATA/REPORTS
04 DID NUMBER DI-MISC-81356A
05 CONTRACT REF PARA. C.4.1
06 TECH OFFICE 138.2
07 DD 250 REQ DD
08 APP CODE
10 FREQUENCY 1-TIME
11 AS OF DATE
12 DATE 1ST SUBM WITH MATERIAL
13 DATE SUB SUBM
14 DISTRIBUTION 133.2
15 TOTAL 1
16 REMARKS 1. TECHNICAL CONTENT AS DESCRIBED IN THE RESPECTIVE CONTRACT LINE ITEM(S).
2. FOR PAYMENT & SUBMISSION OF DATA REFER TO CLAUSES 252.232-7006 & 252.232-
7003 OR 52.232-36. EACH DATA ITEM SUBMITTED BY VENDOR MUST BE SUBMITTED
UNDER A SEPARATE SHIPMENT NUMBER.
SEQ. NO. A001
PREPARED BY
APPROVED BY
DATE
DATE
DD FORM 1423
09 IAC INPUT
SYSTEM/ITEM ELECTRODES
ITEM NO
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 6/27/2025
CONTRACT DATA REQUIREMENTS LIST
01 SEQ NO A002
02 DATA DESC MATERIAL CERTIFICATION
03 SUBTITLE CERTIFICATION DATA/REPORTS
04 DID NUMBER DI-MISC-80678
05 CONTRACT REF PARA C.4.2
06 TECH OFFICE 136.2
07 DD 250 REQ DD
08 APP CODE
10 FREQUENCY 1-TIME
11 AS OF DATE
12 DATE 1ST SUBM WITH MATERIAL
13 DATE SUB SUBM
14 DISTRIBUTION 133.2
15 TOTAL 1
16 REMARKS BLOCK 4, 1. PARAGRAPHS 10.2.2, 10.2.3 & 10.4 OF DI-MISC-80678 DO NOT APPLY.
2. TECHNICAL CONTENT AS DESCRIBED IN THE RESPECTIVE CONTRACT LINE ITEM(S).
3. THIS CERTIFICATION SHALL CONTAIN THE ACTUAL TEST RESULTS OF ALL CHEMICAL
& MECHANICAL TEST(S) REQUIRED BY THE SPECIFICATION
4. THE TEST RESULT(S) SHALL BE QUANTITATIVE & IN THE UNITS REQUIRED BY THE
SPECIFICATION.
5. FOR PAYMENT & SUBMISSION OF DATA REFER TO CLAUSES 252.232-7006 & 252.232-
7003 OR 52.232-36. EACH DATA ITEM SUBMITTED BY VENDOR MUST BE SUBMITTED
UNDER A SEPARATE SHIPMENT NUMBER.
6. IN ADDITION TO THE CERTIFICATION DATA REQUIREMENTS SPECIFIED IN DI-MISC-
80678, THE REQUIREMENTS OF THE CONTRACT SECTION TITLED, “MARKING AND
CERTIFICATION REQUIREMENTS FOR CONTROLLED INDUSTRIAL MATERIAL” APPLY
SEQ. NO. A002
PREPARED BY
APPROVED BY
DATE
DATE
DD FORM 1423
09 IAC INPUT
/1 1
SYSTEM/ITEM ELECTRODES
ITEM NO
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 6/27/2025
CONTRACT DATA REQUIREMENTS LIST
| CONTRACT: | |
| PAGE: | |
| CONTRACT_2: | |
| PAGE_2: | |
| CONTRACT_3: | |
| PAGE_3: | |
| 2025-06-27T13:18:11-0400 | |
| CRUVER.MICHAEL.L.1228518316 |
File details come from the government source that posted it. Updated .