Attachment 1 - Specifications SPMYM326Q4032.pdf
PDF 137 KB Posted
- Attached to
- Welding Rod
- Solicitation number
- SPMYM326Q4032
About this file
This is a contract attachment page specifying requirements for bare welding wire procurement under contract 3439, D26.
The contract requires the manufacturer to produce bare welding wire in compliance with AWS A5.7/A5.7M:2007 (R2017) standard. The specific item procured is Rod, Welding, Bare, Straight Lengths with stock number 3439-LL-DM1-0320, classified as ERCU type, with outside diameter of 0.062 inches and 36-inch length. Rod identification must be accomplished through pressure-sensitive plastic coated tape with AWS classification attached or stamped approximately one inch from the rod's end, or by imprinting or indenting the classification at one or more readable locations on the rod itself. Material shall be furnished from a single lot except where prohibited by normal manufacturing procedures, with a maximum limit of one lot containing fewer than 100 pounds per delivery. Data requirements include a Certificate of Compliance test submitted on Attachment 1 to Exhibit A for each lot included in shipment, signed and dated by a designated vendor official, and material certification documentation per Exhibit A, Sequence A002. Marking and certification requirements for "CIM" designations apply per C524. Preservation and packaging shall follow commercially packaged item preparation standards. Inspection and acceptance responsibility resides with the destination location, with notice of constructive acceptance period provisions applicable.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFQ SPMYM326Q4032 Revised to LB.docx | DOCX document | |
| Combined Synopsis Solicitation Rod Welding SPMYM326Q4032.docx | DOCX document | |
| RFQ SPMYM326Q4032.docx | DOCX document | |
| Data Requirements SPMYM326Q4032.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT
PRINTED 6/27/2025 ATTACHMENT PAGE
3439 D26
C DESCRIPTION/SPECIFICATIONS
C.1 MANUFACTURE BARE WELDING WIRE IN ACCORDANCE WITH AWS A5.7/A5.7M:2007 (R2017).
TYPE, SIZE, AND AWS CLASSIFICATION TO BE AS SPECIFIED IN SECTION B OF THIS SCHEDULE.
C.2 THE RODS SHALL BE IDENTIFIED BY PRESSURE SENSITIVE PLASTIC COATED TAPE WITH
THE APPLICABLE AWS CLASSIFICATION ATTACHED OR STAMPED TO THE ROD
APPROXIMATELY ONE (1) INCH FROM IT'S END, OR BY IMPRINTING OR INDENTING THE
APPLICABLE AWS CLASSIFICATION AT ONE OR MORE LOCATIONS ON THE ROD WHICH
MUST BE READABLE TO THE UNAIDED EYE.
C.3 MATERIAL DESCRIBED BY A STOCK NUMBER SHALL BE FURNISHED FROM ONE (1) LOT
EXCEPT WHEN PROHIBITED BY NORMAL MANUFACTURING PROCEDURES, IN WHICH
CASE, THE CONTRACTOR SHALL LIMIT, TO THE MAXIMUM EXTENT POSSIBLE, THE
NUMBER OF LOTS OFFERED. NOT MORE THAN ONE (1) LOT CONTAINING LESS THAN
100 POUNDS MAY BE OFFERED FOR DELIVERY.
C.4 DATA REQUIREMENTS:
C.4.1.CERTIFICATE OF COMPLIANCE: SEE EXHIBIT A, SEQUENCE A001
ONE COPY OF A CERTIFICATE OF COMPLIANCE TEST SUBMITTED
ON ATTACHMENT 1 TO EXHIBIT A, OR, A SIMILAR FORM WHICH CONTAIN ALL
OF THE DATA ELEMENTS SHOWN ON ATTACHMENT 1 SHALL BE FORWARDED
FOR EACH LOT THAT IS INCLUDED IN THE SHIPMENT. CERTIFICATE OF COMPLIANCE
SHALL BE SIGNED AND DATED BY A DESIGNATED VENDOR
OFFICIAL.
C.4.2 DATA REQUIREMENT - MATERIAL CERTIFICATION - SEE EXHIBIT A, SEQ. A002
C.5 C524; MARKING AND CERTIFICATION REQUIREMENTS FOR "CIM"
D PRESERVATION/PACKAGING/PACKING
D.1 D4: PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS).
E INSPECTION ACCEPTANCE
E.1 E1: RESPONSIBILITY FOR INSPECTION
E.2 E2: INSPECTION AND ACCEPTANCE (DESTINATION).
ITEM NO.
STOCK NUMBER
3439-LL-DM1-0320
SPECIAL CHARACTERISTICS
OUTSIDE DIAMETER: 0.062" X 36" LENGTH
CLASSIFICATION: ERCU
ITEM NAME ROD, WELDING, BARE, STRAIGHT LENGTHS, AWS A5.7 / A5.7M ERCu
SECTION B
SMIC
3J
CONTRACT
PRINTED 6/27/2025 ATTACHMENT PAGE
3439 D26
E.3 E504: NOTICE OF CONSTRUCTIVE ACCEPTANCE PERIOD
H SPECIAL PROVISIONS
K Section
L Section
M Section
| CONTRACT: | |
| ATTACHMENT: | |
| PAGE: | |
| SECTION B: | |
| CONTRACT_2: | |
| ATTACHMENT_2: | |
| PAGE_2: | |
| 2025-06-27T13:17:13-0400 | |
| CRUVER.MICHAEL.L.1228518316 |
File details come from the government source that posted it. Updated .