Data Items CLIN 0007.pdf
PDF 96 KB Posted
- Attached to
- Socket Head and Hex Head Cap Screws Federal contract opportunity
- Solicitation number
- SPMYM326Q1136
About this file
This is a Contract Data Requirements List specifying two data items required for a capscrew contract, both with a submission frequency of one time with material delivery.
Data Item A001 requires a Certificate of Compliance documenting certification of quality compliance, referenced under contract section C.2 and based on Data Item Description DI-MISC-81356A. Data Item A002 requires Certification Data/Report providing chemical and mechanical certification, referenced under contract section C.3 and based on Data Item Description DI-MISC-82386. Both data items are directed to Requiring Office Code 245, require distribution statement A, and must be submitted as final copies with one copy each required. The distribution format is 133.2 with zero draft copies, one final copy, and zero reproduction copies. Both data items must be submitted under separate shipment numbers in accordance with FAR Clauses 252.232-7006, 252.232-7003, or 52.232-36 for payment and submission purposes. The A002 data item specifically requires actual quantitative test results in units specified by applicable specifications, with evidence of testing the correct number of new untested fastener specimens for wedge tensile testing and yield strength testing. Additionally, the requirements of the contract section titled "Marking and Certification requirements for Controlled Industrial Material" apply to the A002 certification data. The document was prepared by Stephen Young and approved by Harmon Steve (245.2).
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Data Items CLIN 0010.pdf | ||
| RFQ SPMYM326Q1136.pdf | ||
| Data Items CLIN 0004.pdf | ||
| Clauses - Full Text Provisions and Clauses.docx | DOCX document | |
| Data Items CLIN 0001.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
(2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP TM ______ OTHER______
D. SYSTEM/ITEM
CAPSCREW
E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs & of DI-MISC- do not apply.
2.
3.
Technical content as described in the respective contract line item(s).
This certification shall contain the actual Test results of all Chemical & Mechanical Test required by the Specification The Test results shall be quantitative & in the units required by the specification.
For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
In addition to the Certification Data requirements specified in DI- MISC- , the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY H. DATE I. APPROVED BY 245.2
X
J. DATE
File details come from the government source that posted it. Updated .