Data Items CLIN 0001.pdf
PDF 96 KB Posted
- Attached to
- Socket Head and Hex Head Cap Screws Federal contract opportunity
- Solicitation number
- SPMYM326Q1136
About this file
This is a Contract Data Requirements List specifying two data items required for a capscrew contract.
The first data item (A001) is a Certificate of Compliance certifying quality compliance. It references Data Item Description DI-MISC-81356A and is required per Section C.2 of the contract. The certificate must be submitted once with the material delivery to the requiring office (Code 245). One final copy is required, with distribution statement A applied. Each data item submission must be submitted under a separate shipment number and payment/submission references Clauses 252.232-7006, 252.232-7003, or 52.232-36.
The second data item (A002) is Certification Data/Report documenting chemical and mechanical certification. It references DI-MISC-82386 and is required per Section C.3 of the contract to Code 245. This certification must contain actual test results for all chemical and mechanical tests specified, with results presented quantitatively in units required by the specification. The fastener certification must demonstrate testing of the correct number of specimens, with new untested fasteners required for each wedge tensile test and yield strength test. Additionally, paragraphs 6 and 8 of DI-MISC-82386 do not apply, and the contract section on "Marking and Certification requirements for Controlled Industrial Material" applies. Like the first item, one final copy is required, submitted once with material delivery under a separate shipment number using the same payment/submission clauses.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Data Items CLIN 0010.pdf | ||
| Clauses - Full Text Provisions and Clauses.docx | DOCX document | |
| Data Items CLIN 0007.pdf | ||
| RFQ SPMYM326Q1136.pdf | ||
| Data Items CLIN 0004.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
(2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP TM ______ OTHER______
D. SYSTEM/ITEM
CAPSCREW
E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs & of DI-MISC- do not apply.
2.
3.
Technical content as described in the respective contract line item(s).
This certification shall contain the actual Test results of all Chemical & Mechanical Test required by the Specification The Test results shall be quantitative & in the units required by the specification.
For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
In addition to the Certification Data requirements specified in DI- MISC- , the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY H. DATE I. APPROVED BY 245.2
X
J. DATE
File details come from the government source that posted it. Updated .