Data Items CLIN 0001.pdf
PDF 96 KB Posted
- Attached to
- Assorted Screw Hardware
- Solicitation number
- SPMYM326Q1135
About this file
This is a Contract Data Requirements List specifying two data items required for a capscrew contract with Requiring Office CODE 245.
Data Item A001 (Certificate of Compliance) requires submission of quality compliance certification with authority DI-MISC-81356A, referenced in contract Section C.2. This certification must be submitted one time with the material delivery under a separate shipment number. One final copy is required for distribution code 133.2.
Data Item A002 (Certification Data/Report) requires chemical and mechanical certification with authority DI-MISC-82386, referenced in contract Section C.3. This certification must contain actual quantitative test results of all chemical and mechanical tests required by specification, using the units specified. New untested fasteners are required for each test involving wedge tensile testing and yield strength testing. The certification must show evidence of testing the correct number of specimens. Test results must be submitted one time with material delivery under a separate shipment number, with one final copy required for distribution code 133.2. Additionally, the contract section titled "Marking and Certification requirements for Controlled Industrial Material" applies to this data item. Payment and submission are governed by Clauses 252.232-7006, 252.232-7003, or 52.232-36. The document was prepared by Stephen Young and approved by Harmon Steve (245.2).
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFQ SPMYM326Q1135 0001.pdf | ||
| Clauses - Full Text Provisions and Clauses.docx | DOCX document | |
| Attachment 4.pdf | ||
| Attachment 5.pdf | ||
| Attachment 6.pdf | ||
| RFQ SPMYM326Q1135.pdf | ||
| Attachment 7.pdf | ||
| Attachment 8.pdf | ||
| Attachment 1.pdf | ||
| Security Agreement For NNPI.pdf | ||
| Attachment 2.pdf | ||
| Attachment 3.pdf |
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
(2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP TM ______ OTHER______
D. SYSTEM/ITEM
CAPSCREW
E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs & of DI-MISC- do not apply.
2.
3.
Technical content as described in the respective contract line item(s).
This certification shall contain the actual Test results of all Chemical & Mechanical Test required by the Specification The Test results shall be quantitative & in the units required by the specification.
For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
In addition to the Certification Data requirements specified in DI- MISC- , the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY H. DATE I. APPROVED BY 245.2
X
J. DATE
File details come from the government source that posted it. Updated .