D5 Gyrator Compactor Specifications.docx
DOCX document 13 KB Posted
- Attached to
- FY25 D5 Gyratory Compactor
- Solicitation number
- 25-494DOT-FINAD-B-47711
- Issued by
- Dupage County, Illinois
About this file
I apologize, but no file content was actually provided in your message. While a filename "D5 Gyrator Compactor Specifications.docx" was mentioned, the actual document text or specifications were not included. Without the specific file contents, I cannot generate a summary. If you would like a summary, please upload or paste the complete file contents.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| BidBuy Standard Terms and Conditions~21.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
D5 Gyrator Compactor Specifications Must meet AASHTO T 312-22 requirements Power Requirements: 115 VAC with a range of +/- 10%, 60 Hz, 15 Amp Consolidation Pressure: 90- 100 kPa Angle of Gyration: Adjustable range from 0 to 1.5 degree internal or external Speed of Gyration: 30 with a range of +/- 0.5 gyrations per minute Number of Gyrations: Adjustable range of 1 to 999 Modes of Operation: Compact to specified number of gyrations or specimen height Data Acquisition: Gyrator number, specimen height, angle of gyration Data Output: USB and RS- 232 Ports Unit of Measure: SI Units Standard Accessories including but not limited to: gravity extruder, Standard height block, specimen papers, printer and printer cable, USB cable, serial cable, power cord, Magnalube and applicator brush, operator manual Warranty must be included for a minimum of 1-year Mold Dimensions: 150.0 mm ID x 317.5 mm height; 50.0 mm minimum specimen height; maximum mold temp- 175 degrees Celsius/ 347 degrees Fahrenheit
File details come from the government source that posted it. Updated .