D01. RFQ_Q0022 UPDATED.pdf

MARINE CORPS BASE CAMP LEJEUNE, NORTH CAROLINA

REQUEST FOR QUOTE PURSUANT TO FAR PART 12

Solicitation Number / RFQ Number: M67001-26-Q-0022

Subject: COC FIELD EQUIPMENT

This is a solicitation for commercial services prepared in accordance with the format in FAR 12.202(b)(1), as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation will not be issued. This procurement is Small

Business set aside under NAICS code 334310 size standard of 750 employees. An Quoter’s submission of a quote does not constitute a contract or authorizes work to begin. This document is not legally binding and does not commit the US Government in any way.

This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition

Circular 2026-01 and Defense Federal Acquisition Regulations Supplement Publication Notice (DPN) 20251110.

In accordance with FAR 12.001(a), when a policy in another part is inconsistent with FAR Part 12, Part 12 shall take precedence.

52.212-2 Evaluation-Commercial Products and Commercial Services (Nov 2021)

Basis for Award: The Government intends to award a contract resulting from this solicitation to the responsible quoter whose quote conforming to the solicitation will be most advantageous to Government, price and other factors considered. The following factors shall be used to evaluate quotes:

• Price

• Technical Capability

• Past Performance

Price Reasonableness: Will be conducted in accordance with FAR 12.204(a). The total quoted price, to include shipping costs, will be used in the price evaluation.

A written notice of award or acceptance of a quote, mailed or otherwise furnished to the successful quoter within the time for acceptance specified in the quote, shall result in a binding contract without further action by either party.

Before the quoter's specified expiration time, the Government may accept a quote (or part of a quote), whether there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

Addendum to 52.212-1 Instructions to Offerors.

Quoters must submit their response to this RFQ via email to ivan.morffi@usmc.mil and david.r.bovee.mil@usmc.mil no later than the posted closing date in this listing.

Questions will be accepted via email up to (96) hours after the posting of the RFQ. No phone questions will be accepted. The deadline is necessary to ensure timely award and the Government may, in its sole discretion, choose not to respond to questions received after the deadline. Questions will be reviewed and addressed via an amendment to the solicitation and/or posting of the Questions and Answer(s) (Q&A) document.

Quotes must contain all requested line items as the contract award will be made in aggregate. Therefore, any quote received without all line items priced will be considered non-responsive.

Quoters are instructed to completely fill out the section (Quoter’s Information) below and return it along with your quote. Quotes should be valid for 90 days unless stated otherwise in the quote.

1. Quoter’s Information

To be eligible for award under this Request for Quotation (RFQ), Quoters must be registered in the System for

Award Management (SAM) https://www.sam.gov/portal/SAM/ and must furnish Unique Entity ID, Cage Code and mailto:ivan.morffi@usmc.mil mailto:david.r.bovee.mil@usmc.mil https://www.sam.gov/portal/SAM/

Federal Tax ID Number. Failure to submit the required information may result in your quotation being considered non-responsive.

COMPANY NAME: ___________________________________________________________

ADDRESS: __________________________________________________________________

CITY: _________________________________ STATE: ___________ ZIP: ______________

UNIQUE ENTITY ID: _____________________________ CAGE CODE: _________________________

FEDERAL TAX ID NUMBER: _______________ FSC: ______________SIC: ___________

NAME AND TITLE OF QUOTER: ________________________________________________

PHONE NUMBER: ______________ E-MAIL ADDRESS: _____________________________

BUSINESS SIZE STATUS: _____________________ PRIMARY NAICS: ___________________

ESTIMATED DELIVERY TIME: ______________ DISCOUNT TERMS: ________________

FOB Destination pricing preferred – see Delivery/Location in table below:

2. Requirement Details:

CLIN Description Delivery/Location Qty U/I Unit Price Total Price

0001 55” Tactical Video

Wall

Camp Lejeune, NC 1 Each

0002 65” Auto Lift Camp Lejeune, NC 1 Each

0003 Tactical Sound Bar

W/MTG and Case

Camp Lejeune, NC 2 Each

Minimum Salient Characteristics:

CLIN0001. Tactical Video Wall System

• Display: Must include four (4) integrated display screens, each sized between 38 and 55 inches, with a minimum resolution of 2K.

• Functionality: Screens must be interoperable, capable of functioning together to create one large, continuous sight picture and operating independently to display four distinct images simultaneously.

• Enclosure & Mobility: Must be housed in a ruggedized, deployable, "Pelican-style" transit case equipped with wheels for mobility.

• Deployment Mechanism: The display system must be mounted internally so that it can slide up from (and retract down into) the transit case, requiring no manual setup or assembly upon deployment.

• Inputs/Outputs: Must include a minimum of four (4) 1080p HDMI ports (cables preferred), as well as AV and optical ports for audio output.

• Security Restrictions: The system must be strictly hardwired. It must NOT possess Bluetooth, Wi-Fi, RFID, or any other wireless transmission capabilities.

CLIN0002. Auto-Lift Single Display System

• Display: Must consist of one (1) 55-inch display screen with a minimum resolution of 2K.

• Enclosure & Mobility: Must be housed in a ruggedized, deployable, "Pelican-style" transit case equipped with wheels.

• Deployment Mechanism: The display must be mounted internally so that it can slide up from (and retract down into) the transit case, requiring no manual setup or assembly.

• Inputs/Outputs: Must include a minimum of four (4) 1080p HDMI ports (cables preferred), as well as AV and optical ports for audio output.

• Security Restrictions: The system must be strictly hardwired. It must NOT possess Bluetooth, Wi-Fi, RFID, or any other wireless transmission capabilities.

CLIN0003. Video Teleconferencing (VTC) Module (formerly Sound Bar)

• Functionality: Must be an integrated VTC module (not a standard sound bar) featuring an integrated webcam, microphone, and a 3-channel stereo loudspeaker system with spatial audio.

• Camera: Must feature a minimum 5x zoom, speaker tracking capabilities, and a horizontal Field of View

(FOV) of 112 degrees or greater.

• Audio/Voice: Must include AI noise removal. Must also include one (1) external, hard-wired microphone featuring multidirectional voice pickup and noise cancellation.

• Interoperability: Must be fully enabled and compatible with Cisco Webex to support the requiring unit's

PACE communications plan.

• Control Interface: Must include an external, hardwired tablet to control, start, end, and merge calls. The tablet must be strictly hardwired with NO Bluetooth or Wi-Fi capabilities.

• Required Ports: Must include, at a minimum: one (1) Audio Line Out, two (2) USB-A ports for external speakers, one (1) HDMI port, one (1) USB-C port, and two (2) USB-A inputs.

THE FOLLOWING FAR AND DFAR PROVISIONS APPLY

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

https://www.acquisition.gov/

(End of provision)

PROVISIONS INCORPORATED BY REFERENCE

52.203-11 Certification and Disclosure Regarding Payments to Influence

Certain Federal Transactions

SEP 2024

52.203-18 Prohibition on Contracting with Entities that Require Certain

Internal Confidentiality Agreements or Statements -

Representation

JAN 2017

52.204-7 System for Award Management - Registration FEB 2026

52.240-90 Security Prohibitions and Exclusions Representatives and

Certifications

JAN 2022

252.203-7005

Representation Relating to Compensation of Former DoD

Officials

SEP 2022

252.204-7024 Notice on the use of the Supplier Performance Risk System MAR 2023

252.225-7055 Representation Regarding Business Operations with the

Maduro Regime

MAY 2022

252.225-7059 Prohibition on Certain Procurements from the Xinjian Uyghur

Autonomous Region-Representation

JUN 2023

THE FOLLOWING FAR AND DFAR CLAUSES APPLY

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/browse/index/far https://www.acquisition.gov/

(End of clause)

CLAUSES INCORPORATED BY REFERENCE

52.203-19 Prohibition on Requiring Certain Internal Confidentiality

Agreements or Statements

JAN 2017

52.204-13 System for Award Management Maintenance OCT 2018

52.209-6 Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for

Debarment

DEC 2025

52.209-10 Prohibition on Contracting with Inverted Domestic

Corporations

JAN 2022

52.212-1 Instructions to Offers – Commercial Products and

Commercial Services

SEP 2023

52.212-4 Contract Terms and Conditions--Commercial Products and

Commercial Services

NOV 2023

52.219-6 Notice of Total Small Business Set-Aside FEB 2026

52.219-33 Nonmanufacturer Rule JAN 2022

52.222-3 Convict Labor JUN 2020

52.222-19 Child Labor- Cooperation with Authorities and Remedies MAR 2026

52.222-50 Combat Trafficking in Persons NOV 2021

52.223-23 Sustainable Products JAN 2022

52.226-8 Encouraging Contractor Policies to Ban Text Messaging

While Driving

MAY 2024

52.232-33 Payment by Electronic Funds Transfer-System for Award

Management

OCT 2018

52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

MAR 2023

52.233-3 Protest after Award JAN 2022

52.233-4 Applicable Law for Breach of Contract Claim JAN 2022

52.240-91 Security Prohibitions and Exclusions JAN 2022

52.247-34 F.O.B. Destination NOV 1991

252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022

252.211-7008 Use of Government-Assigned Serial Numbers SEP 2010

252.223-7008 Prohibition of Hexavalent Chromium JAN 2023

252.225-7048 Export-Controlled Items JUN 2013

252.225-7056 Prohibition Regarding Business Operations with the Maduro

Regime

JAN 2023

252.225-7060 Prohibition on Certain Procurements from the Xinjiang

Uyghur Autonomous Region

JUN 2023

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7006 Wide Area Workflow Payment Instructions JAN 2023

252.232-7010 Levies on Contract Payment DEC 2006

252.244-7000 Subcontracts for Commercial Products or Commercial

Services

NOV 2023

252.247-7023 Transportation of Supplies by Sea OCT 2024

252.246-7008 Sources of Electronic Parts JAN 2023

CLAUSES INCORPORATED BY FULL TEXT

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) Definitions. As used in this clause—

“Automatic identification device” means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

“Concatenated unique item identifier” means—

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

“Data matrix” means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission

(IEC) 16022.

“Data qualifier” means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html .

“DoD item unique identification” means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier;

the original part, lot, or batch number; and the serial number.

“Enterprise” means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

“Enterprise identifier” means a code that is uniquely assigned to an enterprise by an issuing agency.

“Government’s unit acquisition cost” means—

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or definitized line, subline, or exhibit line items, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery.

“Issuing agency” means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

“Issuing agency code” means a code that designates the registration (or controlling) authority for the enterprise identifier.

https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

“Item” means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

“Lot or batch number” means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

“Machine-readable” means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

“Original part number” means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

“Parent item” means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

“Serial number within the enterprise identifier” means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

“Serial number within the part, lot, or batch number” means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

“Serialization within the enterprise identifier” means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

“Serialization within the part, lot, or batch number” means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

“Type designation” means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

“Unique item identifier” means a set of data elements marked on items that is globally unique and unambiguous.

The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html .

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the

Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert “See Schedule” in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparable and DoD serially managed nonrepairable as specified in Attachment

Number ____.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment

Number ____.

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology –

International symbology specification – Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that—

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application

Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application

Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application

Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application

Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard

15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International

Standard 15434, Information Technology – Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall—

(A) Determine whether to—

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification

Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-

130, latest version.

(ii) The issuing agency code—

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government’s unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the

Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area Workflow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

https://acquisition.gov/dfars/part-252-solicitation-provisions-and-contract-clauses#DFARS_252.232-7003

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line-item number (fill in) ___, Unique Item

Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)