D.1 QASP _ Intersocietal Accreditation Commission (IAC) Vascular Lab Services.pdf

2/3/2021 Page 1 of 6

Quality Assurance Surveillance Plan

The contractor will be evaluated in accordance with the following:

1. PURPOSE

This Quality Assurance Surveillance Plan (QASP) provides a systematic method to evaluate performance for the vascular laboratory technologist service contract. This QASP explains the following:

What will be monitored.

How monitoring will take place.

Who will conduct the monitoring?

How monitoring efforts and results will be documented.

This QASP does not detail how the contractor accomplishes the work. Rather, the QASP is created with the premise that the contractor is responsible for management and quality control actions to meet the terms of the contract. It is the Government’s responsibility to be objective, fair, and consistent in evaluating performance.

This QASP is a “living document” and the Government may review and revise it on a regular basis. However, the Government shall coordinate changes with the contractor through contract modification. Copies of the original QASP and revisions shall be provided to the contractor and Government officials implementing surveillance activities.

2. GOVERNMENT ROLES AND RESPONSIBILITIES

The following personnel shall oversee and coordinate surveillance activities.

a. Contracting Officer (CO) – The CO shall ensure performance of all necessary actions for effective contracting, ensure compliance with the contract terms, and shall safeguard the interests of the United States in the contractual relationship. The CO shall also assure that the contractor receives impartial, fair, and equitable treatment under this contract.

The CO is ultimately responsible for the final determination of the adequacy of the contractor’s performance.

Assigned CO: LaQulla Howard

Organization or Agency: Department of Veterans Affairs, NCO 17

b. Contracting Officer’s Representative (COR) – The COR is responsible for technical administration of the contract and shall assure proper Government surveillance of the contractor’s performance. The COR shall keep a quality assurance file. The COR is not empowered to make any contractual commitments or to authorize any contractual changes on the Government’s behalf.

Assigned COR: Selman Bridges

3. CONTRACTOR REPRESENTATIVES

The following employee(s) of the contractor serve as the contractor’s program manager(s) for this contract.

Assigned Program Manager:

Quality Assurance Surveillance Plan

Organization or Agency:

D.1 QASP – Intersocietal Accreditation Commission (IAC) Vascular Lab Services - 36C25722R0061

2/3/2021 Page 2 of 6

4. PERFORMANCE STANDARDS

The contractor is responsible for performance of ALL terms and conditions of the contract.

COR’s will provide contract progress reports quarterly to the CO reflecting performance on this plan and all other aspects of the resultant contract. The performance standards outlined in this QASP shall be used to determine the level of contractor performance in the elements defined. Performance standards define desired services. The Government performs surveillance to determine the level of Contractor performance to these standards.

The Performance Requirements are listed below in Section 6. The Government shall use these standards to determine contractor performance and shall compare contractor performance to the standard and assign a rating. At the end of the performance period, these ratings will be used, in part, to establish the past performance of the contractor on the contract.

5. METHODS OF QA SURVEILLANCE

Various methods exist to monitor performance. The COR shall use the surveillance methods listed below in the administration of this QASP.

a. DIRECT OBSERVATION. 100% surveillance:

b. PERIODIC INSPECTION. Inspections scheduled and reported quarterly per COR delegation or as needed. Five randomly selected patient files will be reviewed per quarterly inspection period. All inspections and reports will be conducted in compliance with VA Privacy and Information security standards.)

c. VALIDATED USER/CUSTOMER COMPLAINTS.

d. RANDOM SAMPLING. Five randomly selected patient files will be reviewed per quarter. All reviews and reports will be conducted in compliance with VA Privacy and Information security standards.

e. Verification and/or documentation provided by Contractor. Services will be performed on VA property and verified by the OR Nurse Manager. Off-site services will not be performed.

2/3/2021 Page 3 of 6

Measures PWS

Reference

Performance

Requirement

Standard Acceptable

Quality

Level

Surveillance

Method

Met AQL/DID

NOT MEET

AQL- CPAR

RATING/ADD

COMMENTS

1. Qualifications of Key Personnel

4.5.4.1. Vascular laboratory

technologist shall have only a certification as a Vascular laboratory (RVT or equivalent).

Vascular lab tech shall be certified and compliant with all certifications

100% Random Inspection of Qualification documents

2. Technical Skills 4.5.4.2. Vascular Lab tech perform within the tech's certified technical skills

All (100%) contract personnel perform within their scope of practice/privileges 100% of the time

100% Random inspection of records

3. Patient Access (A) 4.5.4.3. Patient must receive Treatment in a timely manner

Vascular lab tech Shall be onsite full-time

100% Direct Observation and random Inspection

4. Patient Access (B) 4.5.4.4. Vascular lab tech shall be available and be in location as needed to properly perform tasks as specified

Vascular lab tech shall be onsite on a full-time basis

100% Periodic sampling of time and attendance sheets

5. Patient Safety 4.5.4.5. Patient safety incidents shall be reported using Patient Safety Report All incidents shall be reported immediately (within 24 hours)

All of patient safety incidents are reported using Patient Safety Report (JPRS) within 24 hours of incident

100% Direct observation and periodic inspection

6. Maintains licensing, registration, and certification.

4.5.4.6. Updated Licensing, registration and certification shall be kept current and provided.

All licensing, Registration(s) and Certification(s) shall be provided as they are renewed.

100% Periodic Sampling and Random Sampling

7. Mandatory Training, Privacy, Confidentiality and HIPAA

4.5.4.8. 7 Contractor personnel (s) shall complete all required training on time per VAMC policy. Contractor personnel (s) is aware of all laws, regulations, policies and procedures relating to Privacy, Confidentiality, and HIPAA and complies with all standards Zero breaches of privacy or confidentiality.

All contractor personnel shall comply with all laws, regulations, policies and procedures relating to Privacy, Confidentiality, and

HIPPA.

100% Periodic sampling Contractor personnel shall provide evidence of annual training required by VAMC, reports violations per VA Directive 6500.6

8. Clinical Information Return

4.5.4.8. Vascular lab tech All cases 100% Direct

and random sampling.

2/3/2021 Page 4 of 6 shall be responsible to inform physicians of studies available for reading.

9. Documentation/Timesheet 4.6.4.9. Time sheet documentation to be completed

When reporting to perform service at the VAMC

100% Periodic inspection and random sampling

7. RATINGS

Metrics and methods are designed to determine rating for a given standard and acceptable quality level. The following ratings shall be used:

OUTSTANDING: Performance meets contractual requirements and exceeds many to the Government’s benefit. The contractual performance of the element or sub-element being assessed was accomplished with few minor problems for which corrective actions taken by the contractor were highly effective.

Note: To justify an Exceptional rating, you should identify multiple significant events in each category and state how it was a benefit to the GOVERNMENT. However, a singular event could be of such magnitude that it alone constitutes an Exceptional rating. Also, there should have been NO significant weaknesses identified.

VERY GOOD: Performance meets contractual requirements and exceeds some to the Government’s benefit.

The contractual performance of the element or sub-element being assessed was accomplished with some minor problems for which corrective actions taken by the contractor were effective.

Note: To justify a Very Good rating, you should identify a significant event in each category and state how it was a benefit to the GOVERNMENT. Also, there should have been NO significant weaknesses identified.

SATISFACTORY: Performance meets contractual requirements. The contractual performance of the element or sub-element contains some minor problems for which corrective actions taken by the contractor appear or were satisfactory.

Note: To justify a Satisfactory rating, there should have been only minor problems, or major problems the contractor recovered from without impact to the contract. Also, there should have been NO significant weaknesses identified.

MARGINAL:Performance does not meet some contractual requirements. The contractual performance of the element or sub-element being assessed reflects a serious problem for which the contractor has not yet identified corrective actions. The contractor’s proposed actions appear only marginally effective or were not fully implemented.

Note: To justify Marginal performance, you should identify a significant event in each category that the contractor had trouble overcoming and state how it impacted the GOVERNMENT. A Marginal rating should be supported by referencing the management tool that notified the contractor of the contractual deficiency (e.g. Management, Quality, Safety or Environmental Deficiency Report or letter).

UNSATISFACTORY: Performance does not meet most contractual requirements and recovery is not likely in a timely manner. The contractual performance of the element or sub-element being assessed contains serious problem(s) for which the contractor’s corrective actions appear or were ineffective.

Note: To justify an Unsatisfactory rating, you should identify multiple significant events in each category that the contractor had trouble overcoming and state how it impacted the GOVERNMENT. However, a singular problem could be of such serious magnitude that it alone constitutes an unsatisfactory rating.

An Unsatisfactory rating should be supported by referencing the management tools used to notify the contractor of the contractual deficiencies (e.g. Management, Quality, Safety or Environmental Deficiency Reports, or letters).

2/3/2021 Page 5 of 6

8. DOCUMENTING PERFORMANCE

a. The Government shall document positive and/or negative performance. Any report may become a part of the supporting documentation for any contractual action and preparing annual past performance using

CONTRACTOR PERFORMANCE ASSESSMENT REPORT (CPAR).

b. If contractor performance does not meet the Acceptable Quality level, the CO shall inform the contractor.

This will normally be in writing unless circumstances necessitate verbal communication. In any case the CO shall document the discussion and place it in the contract file. When the COR and the CO determines formal written communication is required, the COR shall prepare a Contract Discrepancy Report (CDR), and present it to CO. The CO will in turn review and will present to the contractor's program manager for corrective action.

The contractor shall acknowledge receipt of the CDR in writing. The CDR will specify if the contractor is required to prepare a corrective action plan to document how the contractor shall correct the unacceptable performance and avoid a recurrence. The CDR will also state how long after receipt the contractor must present this corrective action plan to the CO. The Government shall review the contractor's corrective action plan to determine acceptability. The CO shall also assure that the contractor receives impartial, fair, and equitable treatment. The CO is ultimately responsible for the final determination of the adequacy of the contractor’s performance and the acceptability of the Contractor’s corrective action plan.

Any CDRs may become a part of the supporting documentation for any contractual action deemed necessary by the CO. See Sample CDR below.

9. FREQUENCY OF MEASUREMENT

a. Frequency of Measurement. The frequency of measurement is defined in the contract or otherwise in this document. The government (COR or CO) will periodically analyze whether the frequency of surveillance is appropriate for the work being performed.

b. Frequency of Performance Reporting. The COR shall communicate with the Contractor and will provide written reports to the Contracting Officer quarterly (or as outlined in the contract or COR delegation) to review Contractor performance.

10. COR AND CONTRACTOR ACKNOWLEDGEMENT OF QASP

SIGNED:

COR NAME/TITLE DATE

SIGNED:

CONTRACTOR NAME/TITLE DATE

2/3/2021 Page 6 of 6

CONTRACT REPORT

1. CONTRACT NUMBER 2. REPORT NUMBER FOR THIS DISCREPANCY

3. TO: (Contracting Officer) 4. FROM: (Name of COR)

5. DATES

a. CR PREPARED b. RETURNED BY

CONTRACTOR:

c. ACTION COMPLETE

6. Issue Identified (Describe in detail. Include reference to PWS Directive; attach continuation sheet if necessary.)

7. SIGNATURE OF COR Date:

8. SIGNATURE OF CONTRACTING OFFICER Date:

9a. TO (Contracting Officer) 9a. FROM (Contractor)

10. CONTRACTOR RESPONSE AS TO CAUSE AND ACTIONS TO PREVENT RECURRENCE. (Cite applicable quality control program procedures or new procedures. Attach continuation sheet(s) if necessary.)

11. SIGNATURE OF CONTRACTOR REPRESENTATIVE Date:

12. GOVERNMENT EVALUATION.

13. GOVERNMENT ACTIONS

14. CLOSE OUT

NAME TITLE SIGNATURE DATE

CONTRACTOR

NOTIFIED

COR

CONTRACTING

OFFICER