D 24103 SOW bertholf.pdf
PDF 79 KB Posted
- Attached to
- USCGC Bertholf Tech Rep for Fuel Oil Purifiers
- Solicitation number
- 70z08525Q0029646
About this file
This document is a Statement of Work (SOW) for technical services to inspect and correct the Fuel Oil Purifiers (FOP) on the USCGC BERTHOLF. The U.S. Coast Guard requires a contractor to troubleshoot a water-outlet alarm on the NR2 FOP, which is currently bypassed due to a "flow high / water-outlet separate - stop" alarm. The contractor must provide a qualified Technical Representative to perform tasks including system inspection, troubleshooting, and testing, ensuring compliance with manufacturer procedures and standards.
Key requirements include providing all necessary personnel, materials, tools, and equipment to complete the work, with performance at Base Alameda in California. The contractor will be responsible for inspecting the FOP, assisting ship's forces with troubleshooting, and verifying the system's full operational status. A final report must be submitted within 7 days of the contract period of performance. The point of contact is MK.CM Armando Perez from USCG-SFLC-LRE PL Asset Management, reachable at Armando.Perez@uscg.mil or (571) 607-1558.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| NOTICE OF INTENT TO SOLE SOURCE Bertholf .pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TECHNICAL SERVICES FOR INSPECTION AND CORRECTION OF the Fuel Oil Purifiers (FOP) on
USCGC BERTHOLF
Background. This requirement is for the contractor to troubleshoot a water-outlet alarm on the NR2 FOP.
The FOP is bypassed due to "flow high / water-outlet separate - stop" alarm. D-24103
1. Scope. The Contractor shall provide all personnel including, labor, materials, travel, parts, tools, test equipment, test fittings, supplies, consumables, and equipment to accomplish tasking. The Contractor shall provide the services of a qualified Tech Rep, who is familiar with the FOP system/equipment, to accomplish all tasking. The Tech Rep will be responsible for the following:
• Advise on manufacturer's proprietary information pertinent to the system.
• Assist with proper repair methods, and ensure compliance with manufacturer's procedures and standards during disassembly, inspection, repair, modification, calibration, and reassembly of the equipment/system.
• Ensure compliance with manufacturer's procedures and standards during disassembly, inspection, and reassembly of the FOP.
2. Objective. The objective of this requirement is to correct any issues the FOP currently has.
3. Tasks. The contractor shall provide labor and service to the FOP, to include but not limited to:
4.1. Inspect and/or test of FOP.
4.2. Assist ships forces in the troubleshooting of the FOP.
4.3 Testing and verification system is fully operational.
4. Delivery. Contractor shall provide a final report within 7 days of contract period of performance.
5. Security Requirement. Base Alameda access is required. Vendor shall have a valid driver's license and show identification. Forms will be provided for base access. A CG representative from the cutter may sponsor and escort vendor to the cutter.
6. Place of performance- CGC BERTHOLF, Alameda, CA 94501
7. Period of performance- TBD
8. Points of Contact.
USCG-SFLC-LRE PL Asset Management:
MK.CM Armando Perez Armando.Perez@uscg.mil
(571) 607-1558
File details come from the government source that posted it. Updated .