CW26-145BA.pdf

Page 1 of 56ORDER NUMBER:

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect calls)

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/

OFFEROR

CODE

FACILITY

CODE

CODE

TELEPHONE NO.

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

RFQ IFB RFP

SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF. OFFER

DATED . . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

10. THIS ACQUISITION IS UNRESTRICTED OR

NAICS:

SIZE STANDARD:

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

SET ASIDE: % FOR:

11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

Coll. No.

8 (A)

EDWOSB

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

CW26145BA

Chelsea Walker

BAS1

BAS1

391014499

UNDETERMINED SOURCE

NA BLANK

WASHINGTON DC 20534

UNICOR FPI CENTRAL ACCOUNTS PAYABLE

PO BOX 11849

LEXINGTON, KY 40578-1849

1600003650 See Section B

UNICOR FUNDS 15X4500 FUNDS SHALL BE OBLIGATED BY INDIVIDUAL DELIVERY ORDERS AND NOT BY THE CONTRACT ITSELF

Chelsea Walker

X

06/03/2026

06/10/2026

8:00 AM

BAS1

BASTROP VEHICULAR

1341 TX-95

BASTROP TX 78602

BASTROP VEHICULAR

1341 TX-95

BASTROP TX 78602

06/12/2026

BASTROP VEHICULAR

1341 TX-95

BASTROP TX 78602

06/12/2026

Page 2 of 56ORDER NUMBER:

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

Item No. SUPPLIES OR SERVICE Quantity U/M UNIT PRICE AMOUNT IN US$ Delivery Date

Terms:

00001 NET0002 44 EA 06/29/2026

ADJUSTABLE,CARGO,NET,15"X15"

Adjustable cargo net square mesh 15 inch x 15 inch

2 inch x 2 inch small square mesh with 6 ABS plastic hooks (durable and adjustable) and sub hooks for quick tightening.

Specifications:

Hook Material: ABS plastic

Net Material: Mesh

Bungee Thickness: 4.4 millimeters

00002 MNT0221 22 EA 06/29/2026

SNAP-N-SLIDE-MOUNTING-OUTLET-STRIP

MATERIAL: SNAP AND SLIDE MOUNTING OUTLET STRIP

SPECIFICATIONS: TYPE OSH66; SNAP-ON/SLIDE-OFF FEATURE ALLOWS

MOUNTING IN ANY POSITION, INCLUDING INVERTED; INCLUDES (2)

MOUNTING CLIPS WITH SHEET METAL SCREWS; MEETS UL 1336 STAN-

DARD; RATED AT 15 AMP, 125 VAC, 60 HZ; WHITE ALUMINUM HOUS-

ING; POWER CORD IS 14/3 SJT WITH MOLDED PLUG; RESETTABLE

OVERLOAD CIRCUIT BREAKERS; ON/OFF SWITCH WITH PILOT LIGHT;

Page 3 of 56ORDER NUMBER:

UL LISTED,CSA CERTIFIED.

DIMENSIONS: 12.25"LENGTH X 2.00"WIDTH X 1.75"DEPTH; CORD

LENGTH IS 6 FEET; WEIGHT IS 2.3 LBS.

VENDOR AND PART#: NEWARK IN ONE P/N: 66N7723

00003 ADH0023 200 EA 06/29/2026

732-SILICONE-RUBBER-SEALANT,CLEAR,10OZ.

MATERIAL:

THIS IS A 732 SILICONE RUBBER SEALANT THAT CURES TO TOUGH,

FLEXIBLE SEAL

SPECIFICATIONS:

RTV Silicone Based Formula

Fast Curing

Skins And Ready For Assembly In 10 To 15 Minutes

Full Cure In 24 Hours

Adheres To Metal, Wood, Plastic, Ceramic, Concrete, Etc.

Chemical Restant Compound Withstands Oil, Grease, Hydraulic Fluid

Glycol, And Water Mixtures

Weatherproofing Agents Withstands Most All Enviroments

Long Service Life

Gel Flowing Chemistry That Fills Uneven Surfaces And Assures A

Positive Seal

COLOR: Clear

CONTENTS: 10.1 fl. oz. Caulk Tube

TEMPERATURE RANGE: -60 Degree F To 450 Degree F

USDA RATING: P1

BSBM LAST DATA TEXT REVISION 4-26-12

00004 ADH0328 619 EA 06/29/2026

MEDIUM-STRENGH,THREAD-LOCKER,CAPSULE-242

MATERIAL:

THIS IS A BLUE LIQUID THREADLOCKER USED ON THREADED

FASTENERS TO PREVENT LOOSENING.

SPECIFICATIONS:

Page 4 of 56ORDER NUMBER:

* TYPE: THREADLOCKER.

* CONTAINER SIZE: SMALLER THAN 1oz. ( .5-ml.)

* FORM: LIQUID.

* STRENGHT: MEDIUM

* CONTAINER TYPE: BOTTLE

* SERIES: 242

* SERIES PART #: 24221 (MUST BE EQUIVALENT)

* REMOVAL METHOD: HAND TOOL; HEAT

* FULL CURE TIME: 24:00

* MAXIMUM SERVICE TEMP.: 300.00

00005 AHW0751 1,700 EA 06/29/2026

SPACER,NYLON,OD-.625",ID-.281"

DESCRIPTION:

THIS IS A BLACK NYLON SPACER, PLAIN,

.25" OVERALL LG, .281" INSIDE DIA.

SPECIFICATIONS:

SPACER TYPE- ROUND

MATERIAL- NYLON

FINISH- PLAIN

COLOR- BLACK

INSIDE DIAMETER- .281 in

OUTSIDE DIAMETER- .625 in

OVERALL LENGTH- .25 in

Page 5 of 56ORDER NUMBER:

00006 AHW0829 5,000 FT 06/29/2026

SPLIT-WIRE-LOOM,STANDARD,BLACK,3/8"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A CONVOLUTED SLEEVING USED FOR WIRE AND CABLE

ROUTING IN CAR, BOAT, TRAILER AND TRUCK APPLICATIONS.

1. Conduit-LIke Convoluted Sleeving.

2. Made Of Polyethylene.

3. Split For Easy Wire And Cable Insertion.

4. Will Not Gap When Bent.

5. Solvent And Acid Resistant.

6. Weather Resistant.

7. Abrasion Resistant.

8. UV Stable For Outdoor Use.

9. COLOR: Black

10. INNER DIAMETER (ID): 3/8 Inch

11. NOM. INNER DIAMETER: .350 Inch

12. NOM. OUTER DIAMETER: .505 Inch

13. TEMPERATURE RANGE: -40 Degrees To +200 Degrees F

(JULY 2016)

MUST BE EQUIVALENT TO MSC PART# 001578442

00007 AHW1039 820 EA 06/29/2026

MANUFACTURER'S-INFORMATION-POUCH

MATERIAL:

THIS IS A HEAVY DUTY DOCUMENT PROTECTOR WITH STRAP

SPECIFICATIONS:

DOUBLE FOLD

SNAP CLOSE FLAP

MADE OF .012 INCH THICK CLEAR VINYL

CORNERS SECURED WITH A 1/4 INCH DIAMETER NICKEL-PLATED BRASS GROMMET

Page 6 of 56ORDER NUMBER:

20 INCH PERMANTLY ATTACHED VINYL STRAP

SIZE: 9 INCH X 12 INCH

MUST BE EQUIVALENT TO McMASTER-CARR PART NUMBER (5764T11)

00008 AHW1141 175 EA 06/29/2026

KNURLED-NUT-INSERT,.165"-.260",1/4-20

MATERIAL:

THIS IS A KNURLED NUT INSERT IDEAL FOR MATERIALS THAT ARE

TO THIN TO TAP. THESE KNURLED NUTS WILL EXPAND WHEN

INSTALLED, PROVIDING EXTRA STRENGHT AND INCREASED

RESISTANCE AGAINST SPIN AND PULL-OUT

2011 SPECIFICATIONS:

Zinc Yellow Chromate-plated Steel

Usable In Oversized And Irregular Holes

High Torque-Out Values

High Pull-Out Values

Permits Flush Mounting

Blind Installation

THREAD SIZE: 1/4-20 Inch

GRIP RANGE: .165 Inch -.260 Inch

HOLE SIZE: 25/64 Inch

MUST BE EQUIVALENT TO McMASTER-CARR PART NUMBER (95105A147)

00009 AHW2202 4,200 EA 06/29/2026

BUTT-CONNECTOR,NON-INSULATED,8GA

MATERIAL:

THIS IS A NON-INSULATED BUTT CONNECTOR

2011 SPECIFICATIONS:

Constructed Of ETP Copper

Funnel Entry

Operating Temperature: 350 Degrees F

Page 7 of 56ORDER NUMBER:

WIRE SIZE: 8

MUST BE EQUIVALENT TO GRAINGER PART# M8BCK

00010 AHW6481 2.063 CT 06/29/2026

SPLIT-WIRE-LOOM,STANDARD,BLACK,1/2"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A CONVOLUTED SLEEVING USED FOR WIRE AND CABLE

ROUTING IN CAR, BOAT, TRAILER AND TRUCK APPLICATIONS.

1. Conduit-LIke Convoluted Sleeving.

2. Made Of Polyethylene.

3. Split For Easy Wire And Cable Insertion.

4. Will Not Gap When Bent.

5. Solvent And Acid Resistant.

6. Weather Resistant.

7. Abrasion Resistant.

8. UV Stable For Outdoor Use.

9. COLOR: Black

10. INNER DIAMETER (ID): 1/2 Inch

11. NOM. INNER DIAMETER: 0.500 Inch

12. NOM. OUTER DIAMETER: 0.585 Inch

13. TEMPERATURE RANGE: -40 Degrees To +200 Degrees F

BSBM LAST DATA TEXT REVISION 11-20-12

00011 AHW6482 14 CT 06/29/2026

SPLIT-WIRE-LOOM,STANDARD,BLACK,1"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

Page 8 of 56ORDER NUMBER:

SPECIFICATIONS:

THIS IS A CONVOLUTED SLEEVING USED FOR WIRE AND CABLE

ROUTING IN CAR, BOAT, TRAILER AND TRUCK APPLICATIONS.

1. Conduit-LIke Convoluted Sleeving.

2. Made Of Polyethylene.

3. Split For Easy Wire And Cable Insertion.

4. Will Not Gap When Bent.

5. Solvent And Acid Resistant.

6. Weather Resistant.

7. Abrasion Resistant.

8. UV Stable For Outdoor Use.

9. COLOR: Black

10. INNER DIAMETER (ID): 1 Inch

11. NOM. INNER DIAMETER: 1.00 Inch

12. NOM. OUTER DIAMETER: 1.280 Inch

13. TEMPERATURE RANGE: -40 Degrees To +200 Degrees F

BSBM LAST DATA TEXT REVISION 11-20-12

00012 AHW8282 300 FT 06/29/2026

RUBBER-EDGE-TRIM,NEOPRENE,15/32"

MATERIAL:

THIS IS A NEOPRENE RUBBER EDGE TRIM USED TO COVER EXPOSED

OR UNFINISHED METAL, PLASTIC, WOOD, AND GLASS EDGES

2011 SPECIFICATIONS:

Neoprene Rubber

Medium-Hard With A Durometer Hardness Of 45A-70A

Has Good Fuel, Water, And Ozone Resistance

For Indoor And Outdoor Use

Rounded Edges

TEMPERATURE RANGE: 40 Degrees - 158 Degrees F

Page 9 of 56ORDER NUMBER:

COLOR: Black

INNER WIDTH: 1/8 Inch

INNER DEPTH: 15/32 Inch

OUTER WIDTH: 23/64 Inch

OUTER DEPTH: 5/8 Inch

MUST BE EQUIVALENT TO McMASTER-CARR PART NUMBER (8507K16)

00013 AHW9751 850 EA 06/29/2026

FUSE-HOLDER-W/CAP,MINI-FUSE,30AMP,12GA

MATERIAL:

THIS IS A MINI-FUSE TYPE FUSE HOLDER WITH PROTECTIVE CAP

2011 SPECIFICATIONS:

In-Line Type

With Protective Cap

With Two 4 Inch Wire Leads

FOR WIRE SIZE: 12 Gauge

RATING: 30 AMP

MUST BE EQUIVALENT TO BARNES PART NUMBER (8698)

00014 AUT1923 1,708 FT 06/29/2026

HEAT-SHRINK,ADHESIVE-LINED,1/4"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A 3:1 ADHESIVE LINED HEAT SHRINK TUBING DESIGNED

FOR USE IN WIRE IDENTIFICATION, WIRE BUNDLING, MECHANICAL

PROTECTION, COLOR CODING, LIGHTWEIGHT HARNESSING,

PHYSICAL PROTECTION OF COMPONENTS, STRAIN RELIEF AND

SOLDER INSULATION.

1. Thin Dual Wall Design.

2. Outer Wall Made Of Polyolefin Heat Shrink.

3. Inner Wall Made Of A Hot Melt Adhesive.

4. Inner Layer Provides A Water-Tight Seal.

Page 10 of 56ORDER NUMBER:

5. 3:1 Shrink Ratio.

6. NOMINAL SIZE: 0.250 Inch

7. COLOR: Black

8. OPERATING TEMPERATURE: -55 Degrees C To 100 Degrees C

9. SHRINK TEMPERATURE: 100 Degrees C

00015 AUT3751 22,080 IN 06/29/2026

HEAT-SHRINK,ADHESIVE-LINED,1/8"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A 3:1 ADHESIVE LINED HEAT SHRINK TUBING DESIGNED

FOR USE IN WIRE IDENTIFICATION, WIRE BUNDLING, MECHANICAL

PROTECTION, COLOR CODING, LIGHTWEIGHT HARNESSING,

PHYSICAL PROTECTION OF COMPONENTS, STRAIN RELIEF AND

SOLDER INSULATION.

1. Thin Dual Wall Design.

2. Outer Wall Made Of Polyolefin Heat Shrink.

3. Inner Wall Made Of A Hot Melt Adhesive.

4. Inner Layer Provides A Water-Tight Seal.

5. 3:1 Shrink Ratio.

6. NOMINAL SIZE: 0.125 Inch

7. COLOR: Black

8. OPERATING TEMPERATURE: -55 Degrees C To 100 Degrees C

9. SHRINK TEMPERATURE: 100 Degrees C

00016 AUT3752 57,312 IN 06/29/2026

HEAT-SHRINK,ADHESIVE-LINED,3/16"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A 3:1 ADHESIVE LINED HEAT SHRINK TUBING DESIGNED

FOR USE IN WIRE IDENTIFICATION, WIRE BUNDLING, MECHANICAL

PROTECTION, COLOR CODING, LIGHTWEIGHT HARNESSING,

Page 11 of 56ORDER NUMBER:

PHYSICAL PROTECTION OF COMPONENTS, STRAIN RELIEF AND

SOLDER INSULATION.

1. Thin Dual Wall Design.

2. Outer Wall Made Of Polyolefin Heat Shrink.

3. Inner Wall Made Of A Hot Melt Adhesive.

4. Inner Layer Provides A Water-Tight Seal.

5. 3:1 Shrink Ratio.

6. NOMINAL SIZE: 0.1875 Inch

7. COLOR: Black

8. OPERATING TEMPERATURE: -55 Degrees C To 100 Degrees C

9. SHRINK TEMPERATURE: 100 Degrees C

00017 AUT3753 24,576 IN 06/29/2026

HEAT-SHRINK,ADHESIVE-LINED,3/8"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A 3:1 ADHESIVE LINED HEAT SHRINK TUBING DESIGNED

FOR USE IN WIRE IDENTIFICATION, WIRE BUNDLING, MECHANICAL

PROTECTION, COLOR CODING, LIGHTWEIGHT HARNESSING,

PHYSICAL PROTECTION OF COMPONENTS, STRAIN RELIEF AND

SOLDER INSULATION.

1. Thin Dual Wall Design.

2. Outer Wall Made Of Polyolefin Heat Shrink.

3. Inner Wall Made Of A Hot Melt Adhesive.

4. Inner Layer Provides A Water-Tight Seal.

5. 3:1 Shrink Ratio.

6. NOMINAL SIZE: 0.375 Inch

7. COLOR: Black

8. OPERATING TEMPERATURE: -55 Degrees C To 100 Degrees C

9. SHRINK TEMPERATURE: 100 Degrees C

00018 AUT3754 2,496 IN 06/29/2026

HEAT-SHRINK,ADHESIVE-LINED,1/2"

Page 12 of 56ORDER NUMBER:

SPECIFICATIONS:

THIS IS A 3:1 ADHESIVE LINED HEAT SHRINK TUBING DESIGNED

FOR USE IN WIRE IDENTIFICATION, WIRE BUNDLING, MECHANICAL

PROTECTION, COLOR CODING, LIGHTWEIGHT HARNESSING,

PHYSICAL PROTECTION OF COMPONENTS, STRAIN RELIEF AND

SOLDER INSULATION.

1. Thin Dual Wall Design.

2. Outer Wall Made Of Polyolefin Heat Shrink.

3. Inner Wall Made Of A Hot Melt Adhesive.

4. Inner Layer Provides A Water-Tight Seal.

5. 3:1 Shrink Ratio.

6. NOMINAL SIZE: 0.5 Inch

7. COLOR: Black

8. OPERATING TEMPERATURE: -55 Degrees C To 100 Degrees C

9. SHRINK TEMPERATURE: 100 Degrees C

00019 AUT3755 336 IN 06/29/2026

HEAT-SHRINK,ADHESIVE-LINED,3/4"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A 3:1 ADHESIVE LINED HEAT SHRINK TUBING DESIGNED

FOR USE IN WIRE IDENTIFICATION, WIRE BUNDLING, MECHANICAL

PROTECTION, COLOR CODING, LIGHTWEIGHT HARNESSING,

PHYSICAL PROTECTION OF COMPONENTS, STRAIN RELIEF AND

SOLDER INSULATION.

1. Thin Dual Wall Design.

2. Outer Wall Made Of Polyolefin Heat Shrink.

3. Inner Wall Made Of A Hot Melt Adhesive.

4. Inner Layer Provides A Water-Tight Seal.

5. 3:1 Shrink Ratio.

6. NOMINAL SIZE: 0.75 Inch

Page 13 of 56ORDER NUMBER:

7. COLOR: Black

8. OPERATING TEMPERATURE: -55 Degrees C To 100 Degrees C

9. SHRINK TEMPERATURE: 100 Degrees C

00020 CBL0311 50,000 EA 06/29/2026

18103-X,PYTHON,STD.,CABLE,TIES,BLK,8"

PYTHON STANDARD CABLE TIES COLOR:BLACK

SIZE:8" (1000 PER PACK)

(MAR. 2016)

MUST BE EQUIVALENT TO GRAINGER PART# 36J162

00021 CBL1578 4 EA 06/29/2026

STRAIN,RELIEF-CONNECTOR,PG-16

MATERIAL:

NYLON CABLE CONNECTOR PG-16 RANGE 0.23-0.53

SPECIFICATIONS:

THIS IS A LIQUID TIGHT STRAIN RELIEF TYPICALLY USED

FOR 1/0-4 CABLE. IT IS NYLON 6/6 WITH TPE SEALING

GLAND

- Wire Grip Range of 0.23" - 0.53"

- PG-16 Rated

- Acme Threads on Body to Prevent Slipping

- TPE sealing resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents.

- PG Hub Threads are steel conduit threads

00022 CBL6867 15,000 EA 06/29/2026

18100-X,PYTHON,CABLE,TIES

CABLE TIES

SIZE:4 INCH (1000 PER PACK)

BARNES PRODUCTS PART NUMBER:18100-X OR COMPARABLE

00023 CLP0034 100 EA 06/29/2026

Page 14 of 56ORDER NUMBER:

MATERIAL:

THIS IS A WIRE AND TUBE CLIP WITH A NEOPRENE COVER

2011 SPECIFICATIONS:

Closed Type Furnished Open

Zinc Plated Finish

Neoprene Rubber Cushion

Meets MIL R-3065 And AMS-3209 Specifications

TUBE DIAMETER: 5/8 Inch

WIDTH: 1/2 Inch

MOUNTING BOLT SIZE: 1/4 Inch

THICKNESS: .032 Inch

INDUSTRY NUMBER: -10

MUST BE EQUIVALENT TO BARNES PART NUMBER (17752)

00024 CMP0047 500 EA 06/29/2026

WIRE<(>&<)>TUBE-CLAMP,NEOPRENE-CVR,1/4",1/2"

MATERIAL:

THIS IS A WIRE AND TUBE CLIP WITH A NEOPRENE COVER

2011 SPECIFICATIONS:

Closed Type Furnished Open

Zinc Plated Finish

Neoprene Rubber Cushion

Meets MIL R-3065 And AMS-3209 Specifications

TUBE DIAMETER: 1/4 Inch

WIDTH: 1/2 Inch

MOUNTING BOLT SIZE: 1/4 Inch

THICKNESS: .032 Inch

INDUSTRY NUMBER: -4

MUST BE EQUIVALENT TO BARNES PART NUMBER (17746)

00025 GRM0131 10 EA 06/29/2026

RUBBER-GROMMET,1"-I.D.,3/32"-GROOVE

Page 15 of 56ORDER NUMBER:

THIS IS A RUBBER GROMMET FOR WIRE TUBING EXTENDING

THROUGH PANELS

SPECIFICATIONS:

Made Of Rubber

Black

HOLE INNER DIAMETER: 1 Inch

GROOVE WIDTH: 3/32 Inch

GROOVE DIAMETER:

OUTER DIAMETER: 1-3/4 Inch

MUST BE EQUIVALENT TO MSC PART# 79311726

00026 CTR0053 160 EA 06/29/2026

6-CAVITY-MALE-CONNECTOR,16-18-GAUGE

MATERIAL:

THIS IS A METRI PACK 150 SERIES SEALED ELECTRICAL CONNECTOR

SPECIFICATIONS:

MALE CONNECTOR

ACCEPT 16-18 GA. WIRE

NUMBER OF CAVITIES:6

COLOR: BLACK

00027 CTR0128 800 EA 06/29/2026

MATERIAL:

THIS IS A NYLON-INSULATED GRIP, FEMALE, PUSH-ON

QUICK DISCONNECT

2011 SPECIFICATIONS:

Nylon Insulated Grip

Funnel Entry

Mates With Male Push-Ons Or Male Tabs

Page 16 of 56ORDER NUMBER:

WIRE SIZE: 16-14 Gauge

INSULATION COLOR: Blue

TAB SIZE: .187

TAB THICKNESS: .020

MUST BE EQUIVALENT TO BARNES PART NUMBER (23091)

00028 CTR0851 850 EA 06/29/2026

FUSE-TAPPER-3/16-MALE-TAB-FOR-MINI-FUSE

SPECIFICATIONS:

THIS BRACKET IS A BRASS FUSE TAPPER PUSH ON. 3/16'' WILL BE

THE TAB SIZE FOR THE CONNECTING POINT FOR THE FEMALE

SPADE TERMINAL.

BSBM LAST DATA TEXT REVISION 11-26-13

00029 CTR232544 3,150 EA 06/29/2026

TPA-SECONDARY-LOCK,3-CAVITY-CONNECTOR

"TPA SECONDARY LOCK FITS METRI PACK 150 SERIES

NUMBER OF CAVITIES:3

THREE CAVITY CONNECTOR SECONDARY LOCK

TERMINAL SUPPLY COMPANY PART NUMBER (12052845) OR EQUIVALENT

Page 17 of 56ORDER NUMBER:

00030 CTR232545 2,050 EA 06/29/2026

TPA-SECONDARY-LOCK,2-CAVITY-CONNECTOR

Page 18 of 56ORDER NUMBER:

"TPA SECONDARY LOCK FITS METRI PACK 150 SERIES

NUMBER OF CAVITIES:2

TWO CAVITY CONNECTOR SECONDARY LOCK

TERMINAL SUPPLY COMPANY PART NUMBER (12052634) OR EQUIVALENT

00031 CTR232547 1,225 EA 06/29/2026

2-CAVITY-FEMALE-CONNECTOR,16-18-GAUGE

"METRI PACK 150 SERIES SEALED

FEMALE CONNECTORS ACCEPT 16-18 GA. WIRE

NUMBER OF CAVITIES:2

COLOR:BLACK WITH GRAY WEATHER SEAL

REQUIRES ONE SECONDARY LOCK <(>&<)> TWO WIRE SEALS

TERMINAL SUPPLY COMPANY PART NUMBER (12052641) OR EQUIVALENT

Page 19 of 56ORDER NUMBER:

00032 CTR232548 1,030 EA 06/29/2026

2-CAVITY-MALE-CONNECTOR,16-18-GAUGE

"METRI PACK 150 SERIES SEALED

MALE CONNECTORS ACCEPT 16-18 GA. WIRE

NUMBER OF CAVITIES:2

COLOR:BLACK WITH GRAY WEATHER SEAL

REQUIRES ONE SECONDARY LOCK <(>&<)> TWO WIRE SEALS

TERMINAL SUPPLY COMPANY PART NUMBER (12162000) OR EQUIVALENT

Page 20 of 56ORDER NUMBER:

00033 CTR232549 1,600 EA 06/29/2026

"METRI PACK 150 SERIES SEALED

FEMALE CONNECTORS ACCEPT 16-18 GA. WIRE

NUMBER OF CAVITIES:3

COLOR:BLACK WITH VIOLET WEATHER SEAL

REQUIRES ONE SECONDARY LOCK <(>&<)> THREE WIRE SEALS

TERMINAL SUPPLY COMPANY PART NUMBER (12110293) OR EQUIVALENT

Page 21 of 56ORDER NUMBER:

00034 CTR232550 1,410 EA 06/29/2026

3-CAVITY-MALE-CONNECTOR,16-18-GAUGE

"METRI PACK 150 SERIES SEALED

MALE CONNECTORS ACCEPT 16-18 GA. WIRE

NUMBER OF CAVITIES:3

COLOR:BLACK WITH VIOLET WEATHER SEAL

REQUIRES ONE SECONDARY LOCK <(>&<)> THREE WIRE SEALS

TERMINAL SUPPLY COMPANY PART NUMBER (12129615) OR EQUIVALENT

Page 22 of 56ORDER NUMBER:

Page 23 of 56ORDER NUMBER:

00035 CTR232595 200 EA 06/29/2026

TPA-SECONDARY-LOCK,6-CAVITY-CONNECTOR

TPA SECONDARY LOCK FITS METRI PACK 150 SERIES

NUMBER OF CAVITIES:6

SIX CAVITY CONNECTOR SECONDARY LOCK

TERMINAL SUPPLY COMPANY PART NUMBER (12052850) OR EQUIVALENT

Page 24 of 56ORDER NUMBER:

00036 CTR232600 2 EA 06/29/2026

6-CAVITY-FEMALE-CONNECTOR,16-18-GAUGE

"METRI PACK 150 SERIES SEALED

FEMALE CONNECTORS ACCEPT 16-18 GA. WIRE

NUMBER OF CAVITIES:6

COLOR: BLACK WITH VIOLET WEATHER SEAL

REQUIRES ONE SECONDARY LOCK <(>&<)> THREE WIRE SEALS

TERMINAL SUPPLY COMPANY PART NUMBER (12052848) OR EQUIVALENT

Page 25 of 56ORDER NUMBER:

00037 DIO0024 140 EA 06/29/2026

POWER-DIODE,6-AMP,AUTOMOTIVE

SPECIFICATIONS:

THIS IS A POWER DIODE USED TO RESTRICT THE DIRECTION OF

ELECTRICAL CURRENT FLOW

MATERIAL:

Designed For Automotive Use

Used With Flashing Lights, Ignition Kills, Horn Relays, Etc.

Color Coded To Identify The Direction Of Current Flow

SIZE: 6 Amp

LAST BSBM DATA TEXT REVISION 8-13-12

00038 FSE0015 10 EA 06/29/2026

MAX-FUSE,50-AMP,RED

Page 26 of 56ORDER NUMBER:

THIS IS A STANDARD MAX AUTOMOTIVE FUSE USED TO PROTECT

THE ENTIRE AUTOMOTIVE WIRING HARNESS FROM DAMAGE.

2011 SPECIFICATIONS:

Used on Power Main, Ignition Harness, Anti-Lock Brackes, And Alternator

Replaces Fusible Link Or Fusible Wire

SYMBOL: MAX

RATING: 50 Amp

COLOR CODE: Red

MUST BE EQUIVALENT TO BARNES PART NUMBER (7383)

00039 FSE0031 73 EA 06/29/2026

JCASE,FUSE,30AMP,LOW,PROFILE,PINK

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A 30 AMP LOW PROFILE JCASE FUSE. INDUSTRY STANDARD FUSE

DESIGNED FOR LOW-VOLTAGE AUTOMOTIVE AND OTHER

ELECTRONIC APPLICATIONS.

1. JCASE STYLE DESIGN.

2. HIGH AMPERAGE CAPABILITY.

3. PROVIDES INCREASED TIME DELAY.

4. PROVIDES LOW VOLTAGE DROP.

5. UL LISTED.

6. COLOR CODED AMPERAGE RATING.

7. ANSI STANDARD OCR-A FONT FOR VISUAL INSPECTION SYSTEMS.

8. DOUBLE SPRING-BEAM BOX TERMINAL.

9. SECONDARY LOCKING FEATURE TO HOLD TERMINAL FIRMLY IN PLACE.

10. RATING: 30 AMP

11. COLOR CODE: PINK

12. VOLTAGE RATING: 32V AC/DC

13. FUSE STYLE LOW PROFILE

14. OVERALL LENGTH: 14.5MM

15. OVERALL WIDTH: 12MM

Page 27 of 56ORDER NUMBER:

16. BLADE STYLE: STANDARD

17. COLOR: PINK

18. OVERALL, HEIGHT: 16mm

19. MATERIAL: PSU (COVER); PA66-GF13 (HOUSING)

00040 FSE0047 3,860 EA 06/29/2026

MINI-FUSE,3-AMP,VIOLET

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A MINI STYLE INDUSTRY STANDARD FUSE DESIGNED FOR

LOW-VOLTAGE AUTOMOTIVE AND OTHER ELECTRONIC

APPLICATIONS.

1. Mini Style Design.

2. Plastic Housing.

3. Color Coded Amperage Rating.

4. Built To Exacting OEM Specifications.

5. UL Listed.

6. Fast acting.

7. Parallel Tabs.

8. RATING: 3 AMP

9. COLOR CODE: Violet

10. VOLTAGE RATING: 32V AC/DC

11. TAB SIZE: 3/32 Inch

BSBM LAST DATA TEXT REVISION 11-15-12

00041 FSE0049 675 EA 06/29/2026

MINI-FUSE,5-AMP,TAN

Page 28 of 56ORDER NUMBER:

SPECIFICATIONS:

THIS IS A MINI STYLE INDUSTRY STANDARD FUSE DESIGNED FOR

LOW-VOLTAGE AUTOMOTIVE AND OTHER ELECTRONIC

APPLICATIONS.

1. Mini Style Design.

2. Plastic Housing.

3. Color Coded Amperage Rating.

4. Built To Exacting OEM Specifications.

5. UL Listed.

6. Fast acting.

7. Parallel Tabs.

8. RATING: 5 AMP

9. COLOR CODE: Tan

10. VOLTAGE RATING: 32V AC/DC

11. TAB SIZE: 3/32 Inch

BSBM LAST DATA TEXT REVISION 11-15-12

00042 FSE0050 3,800 EA 06/29/2026

MINI-FUSE,10-AMP,RED

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A MINI STYLE INDUSTRY STANDARD FUSE DESIGNED FOR

LOW-VOLTAGE AUTOMOTIVE AND OTHER ELECTRONIC

APPLICATIONS.

1. Mini Style Design.

2. Plastic Housing.

3. Color Coded Amperage Rating.

4. Built To Exacting OEM Specifications.

5. UL Listed.

Page 29 of 56ORDER NUMBER:

6. Fast acting.

7. Parallel Tabs.

8. RATING: 10 AMP

9. COLOR CODE: Red

10. VOLTAGE RATING: 32V AC/DC

11. TAB SIZE: 3/32 Inch

BSBM LAST DATA TEXT REVISION 11-15-12

00043 FSE0051 45 EA 06/29/2026

MINI-FUSE,15-AMP,BLUE

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A MINI STYLE INDUSTRY STANDARD FUSE DESIGNED FOR

LOW-VOLTAGE AUTOMOTIVE AND OTHER ELECTRONIC

APPLICATIONS.

1. Mini Style Design.

2. Plastic Housing.

3. Color Coded Amperage Rating.

4. Built To Exacting OEM Specifications.

5. UL Listed.

6. Fast acting.

7. Parallel Tabs.

8. RATING: 15 AMP

9. COLOR CODE: Blue

10. VOLTAGE RATING: 32V AC/DC

11. TAB SIZE: 3/32 Inch

BSBM LAST DATA TEXT REVISION 11-15-12

Page 30 of 56ORDER NUMBER:

00044 FSE0052 2,200 EA 06/29/2026

MINI-FUSE,30-AMP,GREEN

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A MINI STYLE INDUSTRY STANDARD FUSE DESIGNED FOR

LOW-VOLTAGE AUTOMOTIVE AND OTHER ELECTRONIC

APPLICATIONS.

1. Mini Style Design.

2. Plastic Housing.

3. Color Coded Amperage Rating.

4. Built To Exacting OEM Specifications.

5. UL Listed.

6. Fast acting.

7. Parallel Tabs.

8. RATING: 30 AMP

9. COLOR CODE: Green

10. VOLTAGE RATING: 32V AC/DC

11. TAB SIZE: 3/32 Inch

BSBM LAST DATA TEXT REVISION 11-15-12

00045 FSE0054 950 EA 06/29/2026

MINI-FUSE,20-AMP,YELLOW

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A MINI STYLE INDUSTRY STANDARD FUSE DESIGNED FOR

LOW-VOLTAGE AUTOMOTIVE AND OTHER ELECTRONIC

APPLICATIONS.

1. Mini Style Design.

Page 31 of 56ORDER NUMBER:

2. Plastic Housing.

3. Color Coded Amperage Rating.

4. Built To Exacting OEM Specifications.

5. UL Listed.

6. Fast acting.

7. Parallel Tabs.

8. RATING: 20 AMP

9. COLOR CODE: Yellow

10. VOLTAGE RATING: 32V AC/DC

11. TAB SIZE: 3/32 Inch

BSBM LAST DATA TEXT REVISION 11-15-12

00046 GRM0021 1,482 EA 06/29/2026

SBR-RUBBER-GROMMET-2"-x-1/4"-GROOVE

DESCRIPTION:

SBR RUBBER GROMMET FOR 2" HOLE DIAMETER AND

1/4" MATERIAL THICKNESS

SBR RUBBER GROMMET SPECIFICATIONS:

FOR HOLE DIA.: 2"

FOR THICKNESS MATERIAL: 1/4"

ID: 1 3/4"

FLANGE DIA.: 2 1/2"

OVERALL HT: 1/2"

HARDNESS RATING: MEDIUM

HARDNESS: DUROMETER 55A

TEMP. RANGE: -30 TO 170 DEGREES

FOR USE OUTDOORS: NO

COLOR: BLACK

PKG. QTY: (5) FIVE

Page 32 of 56ORDER NUMBER:

MCMASTER-CARR PART NUMBER (9600K125) OR COMPARABLE

00047 GRM0028 900 EA 06/29/2026

RUBBER-GROMMET,1/4"-I.D.,1/2"-GROOVE

MATERIAL:

THIS IS A RUBBER GROMMET FOR WIRE TUBING EXTENDING

THROUGH PANELS

2011 SPECIFICATIONS:

Made Of Rubber

Black

HOLE INNER DIAMETER: 1/4 Inch

GROOVE WIDTH: 1/8 Inch

GROOVE DIAMETER: 5/8 Inch

00048 HLD0008 136 EA 06/29/2026

SPARE-TIRE-TIE-DOWN-WHEEL-CONE

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A POLYURETHANE CONE USED TO CENTER A TIRE ON A

SPARE TIRE CARRIER WITH A HOLE THROUGH THE CENTER TO

RECEIVE CARRIER'S THREADED SHAFT.

1. Made Of Polyurethane Rubber.

2. Cone Shape Design.

3. Designed To Center A Spare Tire To A Spare Tire Carrier.

4. Hole Through Center Of Cone To Receive The Spare Tire

Carrier Shaft.

5. COLOR: Black

6. THICKNESS: 0.9375 Inch Min. To 1 Inch Max. Tolerance

7. HEIGHT: 2.875 Inch Min. To 2.9375 Inch Max. Tolerance

8. BASE WIDHT: 6.4375 Inch Min. To 6.75 Inch Max. Tolerance

9. CENTER HOLE DIAMETER: 1 Inch Min. To 1.0625 Inch Max

Tolerance

Page 33 of 56ORDER NUMBER:

BSBM LAST DATA TEXT REVISION 11-15-12

00049 HNG0279 4 EA 06/29/2026

HINGE,NON-REM-PIN,STL,3"WX.120"TX3"H

SPECIFICATIONS:

THIS IS A SURFACE-MOUNT HINGE WITHOUT HOLES

MATERIAL:

Made Of Unfinished Steel

Reversible For Right-And-Left Hand Mounting

Nonremovable Pin

Designed For Surface Mount Applications

Does Not Have Mounting Holes

Leaves Lay Flat

LEAF THICKNESS: 0.120 Inches

OPEN WIDTH: 3 Inches

PIN DIAMETER: 0.25 Inches

LEAF HEIGHT: 3 Inches

MINIMUM RANGE OF MOTION: 265 Deg (from the folded position)

LAST BSBM DATA TEXT REVISION 8-6-12

00050 LOX0235 2 EA 06/29/2026

PADLOCK-HASPS,STEEL,3-3/8"X1-1/2"

MATERIAL:

THIS IS PADLOCK HASPS WITH FIXED PADLOCK EYE USED ON

THE DAYBOXES, ETC.

2011 SPECIFICATIONS:

Zinc Plated Steel Hasps With Fixed Padlock Eye

Page 34 of 56ORDER NUMBER:

LENGTH: 6"

WIDTH: 2-3/8X7/16"

(MARCH 2021)

00051 MAT0066 1,800 EA 06/29/2026

SOUND-DEADENING-PAD-500MM-X-500MM

Description:

Sound Deadening Pads suppress noise and vibration. Conformable to allow easy shaping around a variety of stamped shapes, the pads can be applied to vehicle floor pans, engine compartments, hoods, decklids, as well as inside doors and body panels. Featuring an OEM matching diamond emboss.

Pads are self adhesive, easy to apply and paintable.

Center perforation allows easy door panel installation.

Specifications:

Length: 500 mm

Units per Case: 10

Width: 500 mm

Harmonizing Code: 3921190000

ECCN: EAR99

00052 NUT0369 100 EA 06/29/2026

LOCK-NUT,SERRATED-FLANGE,STL,3/8-16

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A HEX NUT WITH A SERRATED FLANGE. HEX NUTS ARE

COMMON NUTS USED IN GENERAL PURPOSE FASTENING

APPLICATIONS. THE FLANGE PROVIDES A WIDE BASE THAT

ELIMINATES THE NEED FOR A SEPERATE WASHER ALLOWING FULL

THREAD SURFACE CONTACT FOR LARGE LOAD-BEARING STRENGTH.

THE TEETH-LIKE SERRATIONS ON THESE ONE-PIECE LOCKNUTS

Page 35 of 56ORDER NUMBER:

PROVIDE A LOCKING ACTION BITING INTO SURFACES TO RESIST

VIBRATION AND LOOSENING.

1. NUT TYPE: Locknut

2. NUT STYLE: Hex With Flange

3. MATERIAL: Grade 2 Case-Hardened Steel

4. RESISTANCE: Wear And Vibration Resistance

5. COATING: Zinc Plated

6. STANDARD OR METRIC: Standard

7. NUT WIDTH: 9/16 Inch

8. OVERALL HEIGHT: 11/32 Inch

9. THREAD SIZE: 3/8 Inch

10. THREAD PER INCH (TPI): 16

11. THREAD LENGTH TYPE: Fully Threaded

12. THREAD DIRECTION: Right-Hand Threads

13. THREAD TYPE: UNC Course Thread

14. THREAD FIT: Class 2B

15. FLANGE TYPE: Serrated Flange

16. FLANGE DIAMETER: 3/4 Inch

17. FLANGE HEIGHT: 0.10 Inch

18. MINIMUM ROCKWELL HARDNESS: C32

19. MINIMUM COMPLIANCE: IFI-145

20. MINIMUM REQUIRED STANDARD: IFI 100/107 Standards

BSBM LAST DATA TEXT REVISION 7-15-13

00053 PIN3607 100 EA 06/29/2026

SOCKET-HOUSING-PLUG,3-CIRCUITS

MATERIAL:

THIS IS A SOCKET HOUSING PLUG USED FOR ELECTRICAL

WIRING CONNECTION APPLICATIONS

SPECIFICATIONS:

Made Of Plastic

White

Page 36 of 56ORDER NUMBER:

Polorized To Insure Proper Electrical Connections

Three Circuit Configuration

BSBM LAST DATA TEXT REVISION 3-1-12

00054 PLS0002 2,800 FT 06/29/2026

OVERSPRAY,PROTECTIVE,SHEETING

MATERIAL:

THIS IS A 16’ X 400’ ROLL OVERSPRAY PROTECTIVE SHEETING

SPECIFICATIONS:

TO PROTECT EQUIPMENT, FLOORS AND WALLS WITH THIS OVERSPRAY PLASTIC

SHEETING

THIS PRODUCT FEATURES A HIGH DENSITY, TEAR-RESISTANT, CLEAR FILM

MEASURES 16’ X 400’

MUST BE EQUIVALENT TO TASCO PART (MMM06728)

00055 PLU7710 400 EA 06/29/2026

WEATHER-PACK-SEAL,CAVITY-PLUG,RED

MATERIAL:

THIS IS A WEATHER PACK CAVITY PLUG SEAL

2011 SPECIFICATIONS:

COLOR: Red

MUST BE EQUIVALENT TO BARNES PART NUMBER (293539)

00056 RIV0051 2,750 EA 06/29/2026

ALUM/STL-RIVET,DOME-HEAD,3/16,3/8-1/2

MATERIAL:

THIS IS A OPEN-END BLIND RIVET WITH A DOME HEAD

HEAD STYLE: Dome

Page 37 of 56ORDER NUMBER:

RIVET MATERIAL: Aluminum

MANDREL MATERIAL: Steel

RIVET DIAMETER: 3/16 Inch

GRIP RANGE: 3/8 - 1/2 Inch

MUST BE EQUIVALENT TO GRAINGER PART# 38WF42

00057 RIV0318 4 EA 06/29/2026

RIVET-NUT,SLOTTED-BODY,1/4"-20,0.02-0.28

MATERIAL: SLOTTED BODY RIVET NUT

SPECIFICATIONS: MADE OF C1008-C1010 ZINC YELLOW CHROMATE

STEEL; THREADS MEET CLASS 2B; HAS A LARGER BACKSIDE

FLANGE TO INCREASE STRENGTH; IDEAL FOR USE IN PLASTIC

AND THIN MATERIALS; CAN ACCOMMODATE A WIDER RANGE OF

MATERIAL THICKNESSES AS WELL AS SLIGHTLY OVERSIZED HOLES

DIMENSIONS: THREAD SIZE: 1/4"-20;MATERIAL THICKNESS

(GRIP) RANGE:0.020"-0.280";SLOTTED BODY:0.384";LENGTH

FROM UNDER HEAD:1";WIDTH ACROSS HEAD OF RIVET:0.645";

THICKNESS OF HEAD OF RIVET:0.059"

00058 RNG0395 250 EA 06/29/2026

RING-TERMINAL,NON-INSLTD,12-10,5/16"

MATERIAL:

THIS IS A NON-INSULATED RING TERMINAL

2011 SPECIFICATIONS:

Elecro Tin Plated

350 Degree F Operating Temperature

MATERIAL: ETP Copper

WIRE SIZE: 12-10 Guage

STUD SIZE: 5/16 Inch

MUST BE EQUIVALENT TO BARNES PART NUMBER (23264)

00059 RNG0405 600 EA 06/29/2026

RING-TERMINAL,NON-INSLTD,6,1/4"

Page 38 of 56ORDER NUMBER:

THIS IS A NON-INSULATED RING TERMINAL

2011 SPECIFICATIONS:

Elecro Tin Plated

Terminal Barrel Is Rolled With Brazed Seam Chamfered To Form

Funnel Entry

Indentations Or Dimples To Provide The Interior Of The BArrel

With Extra Gripping Power

MATERIAL: ETP Copper

WIRE SIZE: 6 Guage

STUD SIZE: 1/4 Inch

MUST BE EQUIVALENT TO BARNES PART NUMBER (23293)

00060 RNG0406 25 EA 06/29/2026

MATERIAL:

THIS IS A NON-INSULATED RING TERMINAL

2011 SPECIFICATIONS:

Elecro Tin Plated

Terminal Barrel Is Rolled With Brazed Seam Chamfered To Form

Funnel Entry

Indentations Or Dimples To Provide The Interior Of The BArrel

With Extra Gripping Power

MATERIAL: ETP Copper

WIRE SIZE: 8 Guage

STUD SIZE: 1/4 Inch

MUST BE EQUIVALENT TO BARNES PART NUMBER (23284)

00061 RNG0680 3,200 EA 06/29/2026

RING-TERMINAL,NYLON-INSL,16-14GA,1/4

THIS IS A NYLON INSULATED RING TERMINAL

Page 39 of 56ORDER NUMBER:

Funnel Entry

Insulation Grip

WIRE SIZE: 16-14 Guage

STUD SIZE: 1/4

INSULATION COLOR: Blue

MUST BE EQUIVALENT TO BARNES PART NUMBER (23024)

00062 SCR1708 100 EA 06/29/2026

THUMB-SCREW,PLSTC-KNURL-HD,5/8",1/4-20

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A KNURLED HEAD THUMB KNOB SCREW WITH A HIGH

SHOULDER THAT LIFTS THE HEAD OFF THE WORK SURFACE

MAKING THE SCREW EASIER TO GRASPS. DESIGNED FOR

APPLICATIONS WHEN "FINGER-TIGHT" IS SUFFICIENT OR IF

FREQUENT ADJUSTMENTS ARE NECESSARY.

1. HEAD MATERIAL TYPE: Plastic

2. HEAD FINISH: Black Acetal Plastic

3. HEAD TYPE: Knurled

4. HEAD STYLE: Round With Shoulder

5. HEAD DIAMETER (DIA.): 3/4 Inch

6. HEAD HEIGHT (HT.): 3/16 Inch

7. SHOULDER TYPE: Style A

8. SHOULDER LENGTH: 1/8 Inch

9. SHOULDER DIAMETER: 1/2 Inch

10. THREAD MATERIAL TYPE: Stainless Steel

11. THREAD FINISH: 18-8 Stainless Steel

12. THREAD TYPE: Fully Threaded To Shoulder

13. THREAD FIT: Class 3A

14. THREAD DIAMETER: 1/4 Inch

15. THREAD TPI: 20

16. THREAD LENGTH (LG.): 5/8 Inch

17. TIP TYPE: Flat Point

Page 40 of 56ORDER NUMBER:

18. TEMPERATURE RANGE: 32 Degrees To 180 Degrees F

BSBM LAST DATA TEXT REVISION 10-29-12

00063 SCR2534 1,600 EA 06/29/2026

PAN-HEAD-SCREW,SSTL,PHILLIPS,6-32,1"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A PAN HEAD MACHINE SCREW. PAN HEAD

MACHINE SCREWS ARE GENERAL PURPOSE SCREWS

TYPICALLY USED IN NONCRITICAL APPLICATIONS. THESE

SCREWS ARE MOST COMMONLY USED TO FASTEN METAL

TO METAL. THEY ARE DESIGNED TO BE INSERTED INTO

A PRETHREADED HOLE OR MATED WITH A NUT . PAN HEAD

SCREWS HAVE A SLIGHTLY ROUNDED TOP. THE PAN HEAD

PROVIDES A DECORATIVE APPEARANCE, MODERATE

HEAD HEIGHT AND HEAD DIAMETER WITH A FLAT BEARING

SURFACE.

1. TYPE: Pan Head Machine Screw

2. MATERIAL: 18-8 Stainless Steel

3. RESISTANCE: Excellent Corrosion Resistance

4. COATING: None Coated

5. STANDARD OR METRIC: Standard

6. DRIVE TYPE: Phillips

7. DRIVE SIZE: #2

8. HEAD TYPE: Pan Head

9. HEAD DIAMETER: 0.270 Inch

10. HEAD HEIGHT: 0.097 Inch

11. SURFACE UNDER HEAD: Flat Bearing Surface

12. THREAD DIAMETER: #6

13. THREAD PER INCH (TPI): 32

14. THREAD LENGTH TYPE: Fully Threaded

15. MINIMUM THREAD LENGTH: Threaded To Head

16. THREAD DIRECTION: Right-Hand Threads

17. THREAD TYPE: UNC Course Thread

Page 41 of 56ORDER NUMBER:

18. THREAD FIT: Class 2A

19. SCREW LENGTH: 1 Inch

20. SCREW LENGTH MEASURED: From Under The Head

21. TIP TYPE: Blunt Tip

22. MINIMUM TENSILE STRENGTH: 72,000 psi

23. MINIMUM ROCKWELL HARDNESS: B80

24. MINIMUM REQUIRED STANDARD: ASME B18.6.3

25. MINIMUM COMPLIANCE: RoHS Compliant

BSBM LAST DATA TEXT REVISION 6-19-13

00064 SCR2758 10 EA 06/29/2026

THUMB-SCREW,SSTL,SPADE-HD,2",1/4-20

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A SPADE-HEAD THUMB SCREW IDEAL FOR MAKING

FREQUENT ADJUSTMENTS. THE WIDE HEAD MAKES THIS SCREW

EASY TO TURN BY HAND WITH NO TOOLS REQUIRED.

1. Made Of 18-8 Stainless Steel.

2. Corrosion Resistant.

3. HEAD STYLE: Spade With/Out Shoulder

4. HEAD WIDTH (WD.): 23/32 Inch

5. HEAD HEIGHT (HT.): 1/2 Inch

6. THREAD DIAMETER (DIA): 1/4 Inch

7. THREAD PER INCH (TPI): 20

8. THREAD LENGTH (LG.): 2 Inch

9. THREAD TYPE: Fully Threaded

10. THREAD FIT: Class 2A

11. TENSILE STRENGTH: 80,000 psi

12. MINIMUM ROCKWELL HARDNESS: B85

Page 42 of 56ORDER NUMBER:

BSBM LAST DATA TEXT REVISION 02-4-13

00065 SCR3000 21 EA 06/29/2026

HX-HD-SCREW,GRD-8-STL,5/16-18,1-1/4"

A screw is designed to be used in a threaded hole-sometimes along with a nut, while a bolt is designed to be inserted through a hole and secured with a nut.

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A HEX HEAD CAP SCREW. HEX HEAD CAP SCREWS

ARE GENERAL PURPOSE THREADED FASTENERS. WHEN

FULLY THREADED, THESE FASTENERS ARE ALSO KNOWN

AS TAP BOLTS. THEY FEATURE A THICK, HEXAGONAL

HEAD TO PROVIDE AN AMPLE BEARING SURFACE FOR

TIGHTENING WITH A WRENCH.

1. TYPE: Hex Head Cap Screw

2. MATERIAL: Grade 8 Alloy Steel

3. RESISTANCE: Rust Resistance

4. COATING: Zinc Chromate

5. STANDARD OR METRIC: Standard

6. HEAD TYPE: Hex Head

7. HEAD DIAMETER: 1/2 Inch

8. HEAD HEIGHT: 13/64 Inch

9. SURFACE UNDER HEAD: Flat Bearing Surface

10. THREAD DIAMETER: 5/16 Inch

11. THREAD PER INCH (TPI): 18

12. THREAD LENGTH TYPE: Fully Threaded

13. MINIMUM THREAD LENGTH: Threaded To Head

14. THREAD DIRECTION: Right-Hand Threads

15. THREAD TYPE: UNC Course Thread

16. THREAD FIT: Class 2A

17. SCREW LENGTH: 1-1/4 Inch

18. SCREW LENGTH MEASURED: From Under The Head

Page 43 of 56ORDER NUMBER:

19. TIP TYPE: Blunt Tip

20. MINIMUM TENSILE STRENGTH: 150,000 psi

21. MINIMUM ROCKWELL HARDNESS: C33

22. MINIMUM REQUIRED STANDARD: ASME B18.2.1

23. MINIMUM COMPLIANCE: SAE J429

BSBM LAST DATA TEXT REVISION 6-18-13

00066 SEA1463 19,450 EA 06/29/2026

WEATHER-PACK-SEAL,METRI-PACK,WHITE

MATERIAL:

THIS IS A METRI-PACK WEATHER PACK SEAL

2011 SPECIFICATIONS:

COLOR: White

MUST BE EQUIVALENT TO BARNES PART NUMBER (12089678)

00067 TAG0070 1,000 EA 06/29/2026

KEY-TAG,BRASS,ROUND,1-1/2"dia.

MATERIAL:

THIS IS A BRASS KEY TAG

2011 SPECIFICATIONS:

Brass

Round

TAG DIAMETER: 1-1/2 Inch

HOLE DIAMETER: 3/16 Inch

MUST BE EQUIVALENT TO BARNES PART NUMBER (C20683)

00068 TML0215 100 EA 06/29/2026

RING-TERMINAL,NON-INSLTD,6GA,5/16

Page 44 of 56ORDER NUMBER:

THIS IS A NON-INSULATED RING TERMINAL

2011 SPECIFICATIONS:

Elecro Tin Plated

Terminal Barrel Is Rolled With Brazed Seam Chamfered To Form

Funnel Entry

Indentions Or Dimples To Provide The Interior Of The BArrel

With Extra Gripping Power

MATERIAL: ETP Copper

WIRE SIZE: 6 Gauge

STUD SIZE: 5/16

MUST BE EQUIVALENT TO BARNES PART NUMBER (23294)

00069 TML0266 1,600 EA 06/29/2026

RING-TERMINAL,NON-INSLTD,5/16",8ga

MATERIAL:

THIS IS A NON-INSULATED RING TERMINAL

2011 SPECIFICATIONS:

Copper Construction

Tin Plated

Anti-Rotational Tongue

Selectively Annealed Barrel

Serrated Inner Barrel

Hardened Tongue

Long Barrel With Brazed Seam

WIRE SIZE: 8 Gauge

STUD SIZE: 5/16 Inch

MUST BE EQUIVALENT TO BARNES PART NUMBER (78131)

00070 TML0820 8,400 EA 06/29/2026

C,12045773,TERMINALS (MALE)

P/N:12045773 NSN:N/A

CHARACTERISTICS:

PACKARD TERMINALS <(>&<)> CONNECTORS

Page 45 of 56ORDER NUMBER:

18-16 WIRE RANGE

METRI-PACK 150 SERIES SEALED

MALE TERMINALS

MUST BE EQUIVALENT TO MSC PART# 62817721

00071 TML1089 9,000 EA 06/29/2026

12048074,SEALED-FEMALE-TERMINAL,18-16GA

CHARACTERISTICS:

SEALED CONNECTOR

FEMALE TERMINAL,18-16GA

MUST BE EQUIVALENT TO P/N: 12048074

VCVH LAST DATA TEXT REVISION 1-26-16

00072 TML1219 1,400 EA 06/29/2026

RING-TERMINAL,NYLON-INSL,16-14GA,5/16

MATERIAL:

THIS IS A NYLON INSULATED RING TERMINAL

2011 SPECIFICATIONS:

Funnel Entry

Insulation Grip

WIRE SIZE: 16-14 Gauge

STUD SIZE:5/16-3/8

INSULATION COLORl: Blue

MUST BE EQUIVALENT TO BARNES PART NUMBER (23026)

00073 TML2650 25 EA 06/29/2026

PUSH-ON-TERMINAL,FUL-INSL,MALE,16-14GA

MATERIAL:

THIS IS A HEAT SHRINKABLE FULLY INSULATED MALE PUSH-ON

QUICK DISCONNECT

Page 46 of 56ORDER NUMBER:

Fully Nylon Insulated

WIRE SIZE: 16-14 Gauge

TAB SIZE: .250

INSULATION COLOR: Blue

MUST BE EQUIVALENT TO GRAINGER PART# 73126070

00074 TPE0522 800 EA 06/29/2026

TAPE,ELECTRICAL,PLUS,33,SUPER,SCOTCH,3M

MATERIAL: 3M BRAND SCOTCH SUPER 33 PLUS

ELECTRICAL TAPE SPECIFICATIONS: HAS A THICKNESS OF 7 MIL;MEETS

REQUIREMENTS OF ASTM-D 3005 TYPE 1,UL 510,HH1599C,AND CSA 22.2;IT

RESISTS UV RAYS AND CORROSION;IT IS PRIMARILY INSULATION FOR CABLE

WIRING; WORKS IN TEMPERATURE RANGE OF 0 DEGREES FAHRENHEIGHT TO 220

DEGREES FAHRENHEIGHT;IT IS FLAME RETARDANT AND MOISTURE RESISTANT;COLOR

IS BLACK

DIMENSIONS: 3/4"WIDTH; 66 FT. LONG ROLL

MUST BE EQUIVALENT TO GRAINGER PART # 2A225

00075 WIR0193 10,000 FT 06/29/2026

WIRE-DUPLEX-16-GAUGE-RED/BLACK

MATERIAL: RED/BLACK SIXTEEN (16) GAUGE DUPLEX HOOK-UP WIRE,

1000FT ROLL

SPECIFICATIONS: THIS IS DUPLEX STRANDED WIRE; BARE COPPER WITH

PVC INSULATION; 80 DEGREES CELSIUS TO 105 DEGREES CELSIUS

TEMPERATURE RANGE; THIS IS SIXTEEN (16) GAUGE WIRE; WIRE IS

NINETEEN (19) STRANDS @ TWENTY-NINE (29) GAUGE

****MSC PART 20981114 COMES IN A 500 FOOT SPOOL. AS OF 7/31/2024

00076 WIR0194 3,000 FT 06/29/2026

Page 47 of 56ORDER NUMBER:

WIRE,19-STRAND,PURPLE,16ga

MATERIAL:

THIS IS A PLASTIC INSULATED SINGLE CONDUCTOR PRIMARY WIRE,

1000FT ROLL

SPECIFICATIONS:

PVC Insulation

Stranded Copper Conductor

Resistant To Heat, Moisture, Oil and Weather

Meets SAE J-1128 Type GPT Specifications

50 Volts Maximum

COLOR: Purple

WIRE GAUGE: No. 16 Gauge

STRAND GAUGE: 29 Gauge

NUMBER OF STRANDS: 19

NOMINAL OVERALL DIAMETER: .105

MUST BE EQUIVALENT TO BARNES PART NUMBER (KP74920)

00077 WIR0239 37,100 EA 06/29/2026

CABLE-TIES,NYLON,BLACK,5.6"L,.130"W

MATERIAL:

THIS IS A HEAVY DUTY BLACK CABLE TIE

2011 SPECIFICATIONS:

Natural Nylon 6/6

RU-UL Recognized

QPL Listed

COLOR: Black

BUNDLE DIAMETER RANGE: 1/16-1 1/4 Inch

LENGTH: 5.6 Inch

WIDTH: .130 Inch

MIN. LOOP TENSILE STRENGTH: 30 Pounds

TEMPERATURE RANGE: -40 Degrees To 185 Degrees F

MUST BE EQUIVALENT TO BARNES PART NUMBER (C96023)

Page 48 of 56ORDER NUMBER:

00078 WIR4410 4,000 FT 06/29/2026

PRIMARY-WIRE,65-STRAND,BLACK,8GA

MATERIAL:

THIS IS A PLASTIC INSULATED SINGLE CONDUCTOR PRIMARY WIRE

2011 SPECIFICATIONS:

PVC Insulation

Stranded Copper Conductor

Resistant To Heat, Moisture, Oil And Weather

Meets SAE J-1128 Type GPT Specifications

50 Volts Maximum

COLOR: Black

WIRE GAUGE: No. 8 Gauge

STRAND GAUGE: 26 Gauge

NUMBER OF STRANDS: 65

NOMINAL OVERALL DIAMETER: .230

MUST BE EQUIVALENT TO BARNES PART NUMBER (C84023)

00079 WIR4411 10,000 FT 06/29/2026

PRIMARY-WIRE,19-STRAND,RED,16GA

MATERIAL:

THIS IS A PLASTIC INSULATED SINGLE CONDUCTOR PRIMARY WIRE

2011 SPECIFICATIONS:

PVC Insulation

Stranded Copper Conductor

Resistant To Heat, Moisture, Oil And Weather

Meets SAE J-1128 Type GPT Specifications

50 Volts Maximum

COLOR: Red

WIRE GAUGE: No. 16 Gauge

STRAND GAUGE: 29 Gauge

NUMBER OF STRANDS: 19

NOMINAL OVERALL DIAMETER: .105

Page 49 of 56ORDER NUMBER:

MUST BE EQUIVALENT TO BARNES PART NUMBER (23426)

00080 WIR4432 10,000 FT 06/29/2026

PRIMARY-WIRE,19-STRAND,YELLOW,16ga

MATERIAL:

THIS IS A PLASTIC INSULATED SINGLE CONDUCTOR PRIMARY WIRE

2011 SPECIFICATIONS:

PVC Insulation

Stranded Copper Conductor

Resistant To Heat, Moisture, Oil And Weather

Meets SAE J-1128 Type GPT Specifications

50 Volts Maximum

COLOR: Yellow

WIRE GAUGE: No. 16 Gauge

STRAND GAUGE: 27 Gauge

NUMBER OF STRANDS: 19

NOMINAL OVERALL DIAMETER: .105

MUST BE EQUIVALENT TO BARNES PART NUMBER (23429)

00081 WIR4433 1,000 FT 06/29/2026

PRIMARY-WIRE,19-STRAND,WHITE,16GA

MATERIAL:

THIS IS A PLASTIC INSULATED SINGLE CONDUCTOR PRIMARY WIRE

2011 SPECIFICATIONS:

PVC Insulation

Stranded Copper Conductor

Resistant To Heat, Moisture, Oil And Weather

Meets SAE J-1128 Type GPT Specifications

50 Volts Maximum

COLOR: White

WIRE GAUGE: No. 16 Gauge

STRAND GAUGE: 29 Gauge

Page 50 of 56ORDER NUMBER:

00082 WIR4434 5,000 FT 06/29/2026

PRIMARY-WIRE,19-STRAND,BLACK,16ga

MATERIAL:

THIS IS A PLASTIC INSULATED SINGLE CONDUCTOR PRIMARY WIRE

2011 SPECIFICATIONS:

PVC Insulation

Stranded Copper Conductor

Resistant To Heat, Moisture, Oil And Weather

Meets SAE J-1128 Type GPT Specifications

50 Volts Maximum

COLOR: Black

WIRE GAUGE: No. 16 Gauge

STRAND GAUGE: 29 Gauge

NUMBER OF STRANDS: 19

NOMINAL OVERALL DIAMETER: .105

MUST BE EQUIVALENT TO BARNES PART NUMBER (-23438-1)

00083 WIR4486 8,000 FT 06/29/2026

PRIMARY-WIRE,19-STRAND,GREEN,16GA

MATERIAL:

THIS IS A PLASTIC INSULATED SINGLE CONDUCTOR PRIMARY WIRE

2011 SPECIFICATIONS:

PVC Insulation

Stranded Copper Conductor

Resistant To Heat, Moisture, Oil And Weather

Meets SAE J-1128 Type GPT Specifications

50 Volts Maximum

COLOR: Green

WIRE GAUGE: No. 16 Gauge

STRAND GAUGE: 29 Gauge

Page 51 of 56ORDER NUMBER:

MUST BE EQUIVALENT TO BARNES PART NUMBER (23427)

00084 WIR4487 6,000 FT 06/29/2026

PRIMARY-WIRE,19-STRAND,ORANGE,16GA

MATERIAL:

THIS IS A PLASTIC INSULATED SINGLE CONDUCTOR PRIMARY WIRE

2011 SPECIFICATIONS:

PVC Insulation

Stranded Copper Conductor

Resistant To Heat, Moisture, Oil And Weather

Meets SAE J-1128 Type GPT Specifications

50 Volts Maximum

COLOR: Orange

WIRE GAUGE: No. 16 Gauge

STRAND GAUGE: 29 Gauge

NUMBER OF STRANDS: 19

NOMINAL OVERALL DIAMETER: .105

MUST BE EQUIVALENT TO BARNES PART NUMBER (-23430-1)

00085 WIR4488 6,000 FT 06/29/2026

PRIMARY-WIRE,19-STRAND,BROWN,16ga

MATERIAL:

THIS IS A PLASTIC INSULATED SINGLE CONDUCTOR PRIMARY WIRE

2011 SPECIFICATIONS:

PVC Insulation

Stranded Copper Conductor

Resistant To Heat, Moisture, Oil And Weather

Meets SAE J-1128 Type GPT Specifications

50 Volts Maximum

COLOR: Brown

WIRE GAUGE: No. 16 Gauge

STRAND GAUGE: 29 Gauge

Page 52 of 56ORDER NUMBER:

MUST BE EQUIVALENT TO BARNES PART NUMBER (23428)

00086 WIR5231 5,000 FT 06/29/2026

MATERIAL:

THIS IS A PLASTIC INSULATED SINGLE CONDUCTOR PRIMARY WIRE

2011 SPECIFICATIONS:

PVC Insulation

Stranded Copper Conductor

Resistant To Heat, Moisture, Oil And Weather

Meets SAE J-1128 Type GPT Specifications

50 Volts Maximum

COLOR: Blue

WIRE GAUGE: No. 16 Gauge

STRAND GAUGE: 29 Gauge

NUMBER OF STRANDS: 19

NOMINAL OVERALL DIAMETER: .105

MUST BE EQUIVALENT TO BARNES PART NUMBER (23424)

00087 WIR6558 6,050 FT 06/29/2026

SPLIT-WIRE-LOOM,STANDARD,BLACK,3/4"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A CONVOLUTED SLEEVING USED FOR WIRE AND CABLE

ROUTING IN CAR, BOAT, TRAILER AND TRUCK APPLICATIONS.

1. Conduit-LIke Convoluted Sleeving.

2. Made Of Polyethylene.

3. Split For Easy Wire And Cable Insertion.

4. Will Not Gap When Bent.

5. Solvent And Acid Resistant.

Page 53 of 56ORDER NUMBER:

6. Weather Resistant.

7. Abrasion Resistant.

8. UV Stable For Outdoor Use.

9. COLOR: Black

10. INNER DIAMETER (ID): 3/4 Inch

11. NOM. INNER DIAMETER: .750 Inch

12. NOM. OUTER DIAMETER: .820 Inch

13. TEMPERATURE RANGE: -40 Degrees To +200 Degrees F

BSBM LAST DATA TEXT REVISION 11-20-12

00088 TAG0001 2,200 EA 06/29/2026

KEY-TAG-SPLIT-RING-1-1/4"-DIA

DESCRIPTION:

ROUND TAG WITH METAL RIM AND METAL KEY RING,

1 1/4" DIA, WHITE, 50/PACK

MUST BE EQUIVALENT TO NULEAF PART NUMBER (AVE11025)

00089 SCR0556 100 EA 06/29/2026

SELF-TAP-SCREW,HEX-WSHR-HD,SSTL,1/4,1"

MATERIAL:

THIS IS A SELF DRILLING/TAPPING SCREW WITH A INDENTED HEX

WASHER HEAD

2011 SPECIFICATIONS:

HEAD STYLE: Indented Hex Washer

POINT: #3

Page 54 of 56ORDER NUMBER:

MATERIAL: Stainless Steel

DIAMETER: 1/4

LENGTH: 1 Inch

MUST BE EQUIVALENT TO BARNES PART NUMBER (95595)

00090 AUT4929 25 EA 07/21/2026

BK12849-15,SHIELD-CAP(60A-80A)(LC100M)

Shield Cap Precision Cut (LC100M)

PART#: BK12849-18

VENDOR MOST LIKELY USED: LINCOLN ELECTRIC #80302734

00091 HWS0141 14 EA 07/21/2026

TIG-TORCH-COLLET-3/32"

MATERIAL:

TIG-TORCH-COLLET-3/32"

MUST BE EQUIVALENT TO MSC PART NUMBER (62143839)

00092 HWS0205 25 EA 07/21/2026

FLEXCUT-ELECTRODE

MATERIAL:

ELECTRODE FOR USE W/LC100M PLASMA TORCHES

MUST BE EQUIVALENT TO LINCOLON ELECTRIC PART NUMBER (BK12849-3)

00093 HWS0218 25 EA 07/21/2026

Page 55 of 56ORDER NUMBER:

GAS-LENS-FOR-3/32"-MAX -ELECTRODE

MATERIAL:

GAS LENS: FOR 3/32 in MAX ELECTRODE Dia, 45V44, PACKAGE OF TWO (2)

MUST BE EQUIVALENT TO W.W. GRAINGER, INC. PART NUMBER (6UGZ4)

00094 HWS0219 25 EA 07/21/2026

NOZZLE-ALUMINA-NO.6-STD-53N60

MATERIAL:

NOZZLE: ALUMINA, No. 6, STD, 53N60, FOR TIG WELDING, PACKAGE OF TEN (10)

MUST BE EQUIVALENT TO W.W. GRAINGER INC. PART NUMBER (6UHCO)

00095 HWS0241 1,500 EA 07/21/2026

6"-80-GRIT-SANDING-DISC-PK100

MATERIAL:

SANDING DISC: COATED, NON-VACUUM, 80 ABRASIVE GRIT, COURSE,

ALUMINUMOXIDE, 100PK

MUST BE EQUIVALENT TO GRAINGER PART # 49XW78

00096 HWS0242 25 EA 07/21/2026

PLASMA-TORCH-NOZZLE-60A-5PK

Page 56 of 56ORDER NUMBER:

NOZZLE FOR USE W/LC100M/LC105M PLASMA TORCHES,

COMES IN A 5PK.

MUST BE EQUIVALENT TO LINCOLN ELECTRIC PART NUMBER (BK12849-5)

00097 TPE0022 101 RL 07/21/2026

HIGH-TEMPERARURE-MASKING-TAPE-1-1/2"

MATERIAL:

3M 233+/401+ HIGH TEMPERATURE MASKING TAPE- 1-1/2"X 60 YDS

MUST BE EQUIVALENT TO ULINE PRODUCTS NUMBER (S-10296)

Clause Attachment These FAR clauses are Incorporated by reference - please go to www.acquisiton.gov to see the full clause language.

52.212-4 Terms and Conditions—Commercial Products and Commercial Services (Deviation)

52.203-17 Contractor Employee Whistleblower Rights

52.203-19 Prohibition on Requiring Internal Confidentiality Agreements

52.204-13 System for Award Management – Maintenance (Deviation)

52.209-6 Protecting the Government's Interest When Subcontracting with Debarred/

Suspended Contractors (Deviation)

52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (Deviation)

52.222-3 Convict Labor (Deviation)

52.222-19 Child Labor Cooperation (Deviation)

52.222-36 Equal Opportunity for Veterans (Deviation)

52.222-50 Combating Trafficking in Persons (Deviation)

52.222-90 Addressing DEI Discrimination by Federal Contractors (Deviation)

52.223-23 Sustainable Products and Services (Deviation)

52.225-3 Buy American-Free Trade Agreements-Israel Trade Act (Deviation)

52.225-3 Buy American-Free Trade Agreements-Israel Trade Act with Alt II (Deviation)

52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving

52.232-33 Payment by Electronic Funds Transfer- System for Award Management

52.233-3 Protest After Award (Deviation)

52.233-4 Applicable Law for Breach of Contract Claim (Deviation)

The following JAR clause can be found at www.acquisition.gov/jar:

2852.212-4 Contract Terms and Conditions, Commercial Items