CUI_Nonnuclear_CMD_20231208.pdf

DEPARTMENT OF THE AIR FORCE

AIR FORCE LIFE CYCLE MANAGEMENT CENTER

HANSCOM AIR FORCE BASE, MASSACHUSETTS

CUI

MEMORANDUM FOR DISTRIBUTION 8 December 2023

FROM: Force Protection Division, AFLCMC/HBU

SUBJECT: Non-Nuclear Configuration Management Database (CMD) Equipment Approval

1. The CMD equipment listed below is approved for use when employed in the tested PL-1 nonnuclear through PL-4 applications and configurations (information can be obtained from AFLCMC/HBU). The first section is of items deemed PROCURABLE as of the date of this memorandum.

2. The second section of items is NON-PROCURABLE but may still be supported/sustained. Items deemed no longer procurable or non-procurable may be due to varying reasons. For example, they may still be approved for sustainment, but the manufacturer no longer produces new units, is no longer supported, or has compliancy issues, etc.; you may contact the POC listed at the bottom of this document for questions and clarification if the manufacturer is unable to address them. This letter supersedes the previous approved memorandum dated 02 May 2023.

Yellow highlight indicates correction, change, and/or addition.

PROCURABLE

PL-1 Non-Nuclear and Below Command, Control Display Equipment (CCDE)

LINX Annunciator:

LINX Annunciator Predator Elite, with integrated access control:

LINX Annunciator Version 3.2.274p, subpatch p32274.1.13 LINXSNMP version 3.3.274P, subpatch 3.3.274P.1.13.30 LINX Annunciator Version 3.3.274p, subpatch p33274.1.13.33 LINX Annunciator Version 8.1 (Win 10)

LINX Predator Enrollment System Version 4.1.220 LINX Predator Badging Enrollment Application Version 8.1.2100P LINX Versatile Interface Panel (VIP) Version 1.148 LINX Versatile Interface Panel (VIP) Version 1.172 LINX Versatile Interface Panel (VIP) Version 1.64 LINX Versatile Interface Panel (VIP) Version 8.116 LINX Versatile Interface Panel, Expandable (VIP-E) Version 7.145 LINX Versatile Interface Panel, Expandable (VIP-E) Version 7.284 LINX Versatile Interface Panel, Expandable (VIP-E) Version 7.288 LINX Versatile Interface Panel (VIP-16i) Version 1.09 WSD-E Card Reader version 3.111 9 iDentyTech IDT Jade Biometric Physical Access Control:

IDT Jade Palm Scanner Model 100120135-PRO, v15.06.000-112

IDT Jade Palm Enrollment Scanner (USB) Model 100230910-PRO, v15.06.000-112

CUI

Lenel Annunciator:

LENEL OnGuard Version 7.5 Note: Not approved with any Ground Based Radars.

Vindicator Annunciator:

Vindicator Command and Control Platform Version 10

Vindicator 10 Annunciator Workstation (Win 10 LTSC):

Windows 10 LTSC version 21H2 (OS Build 19044)

Vindicator Security Server (VSS) Windows Server 2019 version 1809 (OS Build 17763.4377)

Win structured query language (SQL) Database Management VSS SQL Server 2019 version 1809 (OS Build 17763.4377)

Vindicator System Terminal Windows 10 LTSC version 21H2 (OS Build 19044)

Vindicator Command and Control 2 (VCC2) 1.3.0.2 SP4 V3 Network Security (IDS & ACS) Firmware 4.3.2 SP VR22 V5 Network Security (IDS & ACS) Firmware 4.5.2 SP VR22 AES–1500 Network Field Device Firmware 4.3.2 SP VR22 Security Archive Workstation 2 (SAW2) 1.4.3.0 SP6 Vindicator Badge Manager 3 2.0.26.7 SP3 Vindicator Site Commander with or without SAW2 1.3.0.7 SP2 Vindicator Area Commander 1.1.0.7 Vindicator Premise Controller 4.3.2 VR22 Vindicator PC Smart Pak (PCSP) 6.0.0.1

Note: No new orders for V5 IDS & ACS hardware (V5 panel) are being taken by the OEM.

Assessment Subsystems:

Video Servers:

Advantor Video Management System (VMS) Software (For use only with Advantor ASN 6.0):

Advantor VMS Version #va-advantorvms-3.3.22-1 (1/el5) Advantor VMS Wall Version ds-vmx-3.3.1-3 Milestone Xprotect Server Version 12.3 using Lenel OnGuard Version 7.5 PSGG Video Image Control and Display System (VICADS) Version 4.3 using LPE v8.1 (Win 10) PSGG Video Image Control and Display System (VICADS) Version 4.3.5 using Vindicator (Win 10)

Server O/S: Microsoft Windows Server 2022 version: 10.0.20348, (OS Build 20348) Client O/S: Microsoft Windows 10 Internet of Things Enterprise LTSC version: 10.0.19044, (OS Build 19044)

PSGG VICADS Version V100.2.1_FINAL_7 Video Management System using LINX Predator Elite Version 8.1.2100p, subpatch p8121.01.17, CSS 2.0.0 (Win 10 LTSC 2021; Win Server 2022, build 21H2;

Ubuntu 20.04 LTS in FIPS Mode)

Access Control:

PSGG LINX Predator Elite Arming Keypad

Assessment Cameras:

CUI

NOTE: The following imagers may be used to perform alarm assessments from interior and exterior sensor points.)

Axis Q6075 Indoor PTZ Axis Q6075-E Outdoor PTZ Bosch 8001 Fixed Thermal Camera (Model:NHT-8001-F35VF) Bosch Flexidome Starlight 8000i Dual SD Variant must be used or WLAN Disabled (Model: NDE-8502-R) Bosch NBN-63023-B Bosch NBN-73023-BA Bosch NBN-80052-BA Pelco Sarix IXE Series Box Cameras w/ SureVision 3.0 Vivotek IP9165-HT-v2. Note: For indoor use only

Pan-Tilt-Zoom Cameras:

NOTE: These cameras may be used to assess alarms received from the approach zone as well as to perform surveillance and situational awareness functions. They will not be used as the primary means to perform alarm assessments of interior or exterior sensor points.

Bosch Auto Dome IP Starlight 7000i Camera (Model:NDP-7512-Z30) Bosch MIC IP Starlight 7100i (Model:MIC-7522-Z30W) Bosch MIC IP Fusion 9000i (Model:MIC-9502-Z30WVF)

Camera Environmental Enclosures:

Bosch UHO-HBGS-61 Outdoor Camera Housing

Interior Sensors:

NOTE: Balanced Magnetic Switch (BMS) will not be used as a line of detection.

ASSA ABLOY (Securitron Group) MSS-1 High Security Balanced Magnetic Switch Banner Engineering Series Active Infrared (AIR), intrinsically safe, Model SMI30 (Must be installed as an array of individually reporting sensor points, for use across openings in areas where explosive fumes may be present). BEA LZR-i30 BEA LZR-s600 Bosch ISC-BPQ2-W12 PIR (Curtain Configuration Only) Bosch ISC-PDL1-WA18G PIR (Curtain and Volumetric Configuration) Dortronics 1110 xD xCT, Magnetic Lock/BMS Dortronics 1120 x2D xCT, Series Electromagnetic Lock and BMS East Coast Security Products Inc. ESM-6T Tandem Balanced Magnetic Switch Eltec 862 Passive Infrared (PIR) Sensor (Wall) Eltec 864 PIR Fiber Sensys LD204S Fiber Sensys LD308SH Magnasphere HS-L1.5-101 BMS Magnasphere HS-L1.5-111 BMS Magnasphere HSS-L2C-111 BMS Magnasphere HSS-L2C-111-A BMS Magnasphere HSS-L2D-000 BMS Magnasphere HSS-L2D-800 BMS Magnasphere HSS-L2S-800 BMS

CUI

Magnasphere Interior Barrier Sensor Model MSK-101-MM Magnasphere Interior Motion Sensor Model MSK-101-MM Magnasphere L2C 101A (Recessed Switch) Magnetic Contact Switch Magnasphere, High Security Sensor (HSS) Door Contact Switch, BMS, Version HSS-L2S-000 Magnasphere L2C-101 (Concealed switch) Magnetic Contact Switch Optex SX360Z PIR Protech Maxiris 3000/3100 Active IR Interior Sensor Protech Passive Infrared and Microwave Intruder Detectors (PIRAMID) SDI-76-G (Volumetric) Protech Passive Infrared and Microwave Intruder Detectors (PIRAMID) SDI-77-D (Volumetric) Protech SDI-76M-HS1-H Volumetric (Coverage 60’x 40’, Two Sensors in Combination) Protech SDI-76MW Volumetric (Coverage 60’x 40’, Two Sensors in Combination) Protech SDI-77XL2-EX, Explosion Proof Volumetric

Exterior Sensors:

BEA LZR-i30 (ECP Configuration) BEA LZR-s600 (ECP Configuration) DeTekion Defensor 100 Fence Sensor DeTekion Defensor 100 Fence Sensor (with Culvert Configuration) DeTekion Defensor 100 sensor system with the GD-5000 Eliminator signal analyzer DeTekion Vertical Taut Wire Sensor 400 (VTW-400), full fence or out-rigger configuration EAG of Americas Infrared Intrusion Detection System 4/2/2 (IIDS4/2/2) Active Infrared Sensor EAG of Americas Infrared Intrusion Detection System 4/4/2/2/2 w/ PSTC EAG of Americas Intrusion Detection System 4/2 (IDS 4/2) Active Infrared Sensor ECSI Infrared Pulsed Intrusion Detection System (IPIDS), up to 80m with spring loaded mount bases and 100m with solid concrete bases.

Fiber SenSys Fiber Defender The following models have been tested: 331, 332, 341, and 342. Note: The 331 and 332 series is with “Sensitive” Lead-in cables whereas the 341 and 342 series is with the “Insensitive” Lead-in cables. Also, the last digit (1 or 2) indicates a single channel processor or dual channel processor. Additional note: The 33x series is normally utilized for TASS applications with the 34x series being utilized for all hardwired configurations.

Fiber SenSys Fiber Defender 525 (Note: Not approved for use in Northern tier, or areas where snow and ice accumulations are normal, pending further testing) Fiber Sensys Fiber Defender FD-342, v4.47 Fiber Sensys Fiber Defender FD-342, v4.47 (Culvert Configuration) IR Global Infrared Intrusion Detection System 4/4/2 IR Global IRG-509-15M Protech (PIRAMID) / SDI-76-XL-MIL LT (Ladder and Tower) Only Protech (PIRAMID) / SDI-76-XL-MIL, PIR and Monostatic Microwave Sensor Protech Maxiris 3000/3100 Active Infrared Barrier (100 meter) w/ New Cell Insensitive to the Sun (NCIS) Cells Protech Maxiris 3100 Active Infrared Barrier (100 meter) Protech Sorhea Technology G-Fence 600 Zoning (600Z) System Protech Sorhea Technology G-Fence 600 Zoning (600Z) System (Culvert Configuration) RBtec Ironclad Fence Sensor Double Run Configuration Senstar FlexZone Fence Sensor (NOTE: Not approved for use in Northern tier, or areas where snow and ice accumulations are normal, pending further testing) Senstar Omnitrax buried line sensor firmware version MSP v2.81 w/Field Programmable Gate Array (FPGA) v13.05 Senstar Omnitrax buried line sensor w/Firmware Version MSP v2.90 w/FPGA v13.93

CUI

Senstar UltraWave Detection Sensor TE (W/Whiteman AFB tamper protection modification) Senstar UltraWave Microwave Detection Sensor Senstar UltraWave Microwave Detection Sensor (Firmware 3.05) Southwest Microwave 330 Digital Microwave System Southwest Microwave 385 Monostatic Sensor, up to 100m Southwest Microwave 460B Active Infrared Exterior Sensor Southwest Microwave Intrepid 334-33465 (Model 334), Double Stacked configuration with Model 336 installed on bottom of stack and Model 334 installed on top (Note: Not approved for use in close proximity with airfield due to X-Band frequency for Model 334) Southwest Microwave Intrepid 336-33464 (Model 336), Double Stacked configuration Southwest Microwave Intrepid Micropoint II.

Wide Area Detection/Approach Zone Sensors:

FLIR Ranger 1 Perimeter Surveillance Radar (700 meters) FLIR Ranger 2 Perimeter Surveillance Radar (1400 meters) FLIR Ranger 3 Perimeter Surveillance Radar (2800 meters) Magos SR-500 Perimeter Surveillance System when integrated with the Advantor Systems ASN, Version

6.2. MASS Version 2.24.10053, SR-500 Radar Version 3.64 and Radar Manager Version 1.5 SpotterRF C40D Integrated with Advantor Version 6.2 (Note: Not approved for use in Northern tier, or areas where snow and ice accumulations are normal, pending further testing)

PROCURABLE PL-3 and PL-4

In addition to all of the above components, the following equipment is approved for use in the protection of PL-3 and below assets:

Command, Control Display Equipment (CCDE): No Additional

Assessment Subsystems:

Clear Align VZ-250 LRTI 23164-600 Clear Align VZ-250 LRTI 23164Z1-600 (Improved Cooling) Clear Align LRTI-w/CCTV C907891 Complete Kit TICC/PTH only C907892

FLIR DEFENDIR MS-UC 640 30/90MM CZ

Interior Sensors: No Additional Exterior Sensors: No Additional

The following section is for NON-PROCURABLE items but may still be supported/sustained. Items deemed no longer procurable or non-procurable may be due to varying reasons. For example, they may still be approved for sustainment, but the manufacturer no longer produces new units, is no longer supported, or has compliancy issues, etc.; you may contact the POC listed at the bottom of this document for questions and clarification if the manufacturer is unable to address them. NOTE: Previously installed systems will remain on this list as legacy systems and for fixed site sustainment support IAW with DAFI 31-101, Ch 9.

CUI

NON-PROCURABLE

PL-1 Non-Nuclear and Below Command, Control Display Equipment (CCDE)

LINX Annunciator (formerly known as Will-Burt Annunciator):

LINX Annunciator Predator Elite, with integrated access control:

Annunciator Version 3.2.274p Annunciator Version 3.0.252 Annunciator Version 3.0.246 LINX Predator Enrollment System Version 4.0.203 WSD 2000 Card Reader version 1.8V WSD-E Card Reader version 3.110

Advantor Annunciator:

Advantor Advantage Suite for Networks (ASN) Version 4.0 Advantor Advantage Suite for Networks (ASN) Version 5.0 Advantor Integrated Command, Control, and Access Control System Version 5.0 Advantor Integrated Command, Control, and Access Control System Version 5.0 Service Pack 6 Advantor Integrated Command, Control, and Access Control System Version 6.0 (Note: Not DMDC3 compliant) Advantor Advantage Suite for Networks (ASN) Version 6.2 (Win 10) (Note: Not DMDC3 Compliant)

Vindicator Annunciator:

Vindicator 10 Annunciator Workstation (Win 10 LTSB):

AES-1500 Network Field Device-Version 4.3.2 SP VR11 Security Archive Workstation 2-Version 1.4.3.0 V3 Head-End Server (IDS & ACS)-Version 4.3.2 SP VR11 V5 Network Security Appliance-Version 4.5.2 SP VR11 Vindicator Area Commander-Version 1.1.0.7 Vindicator Badge Manager 3-Version 2.0.26.7 Vindicator Command and Control 2-Version 1.3.0.2 SP4 Vindicator PC Smart PAC (PCSP)-Version 6.0.0.1 Vindicator Premise Controller-Version 4.3.2 Vindicator Security Server-Version 1.0 Vindicator Site Commander-Version 1.3.0.7 Vindicator System Terminal-Version Win 10 LTSB Vindicator Security Management and Reporting Terminal (SMART) Annunciator with Graphics Display:

Version 2.40 with Administrative Browser 4.0 Version 2.43, Build 11 Vindicator Command and Control (VCC) Version 1.0.1.5 Vindicator Access Control System (ACS) Version 2.3, Build 21 Transponder Firmware Version 2.28 TS 4000 Radio Frequency (R/F) Modem Interface Vindicator SMART with Graphics Display Version 2.39 and SAW Version 3.9 Vindicator Command and Control Platform (VCCP) v5- Version 5.0 Vindicator Command and Control Platform (VCCP) v5- Version 6.0 Vindicator Command and Control Platform (VCCP) v5- Version 6.5 (Win 7, 32 bit only) Vindicator Command & Control (VCC) GUI Version 5.1.1.4 Vindicator Badge Manager 2 (VBM 2) Version 2.0.7.0 Vindicator Badge Manager 2 (VBM 2) Version 2.0.7.1 (Win 7, 32 bit only)

CUI

Vindicator Security Archive Workstation (SAW 5) Version 5.1.0.6 Honeywell Vindicator Site Commander Version 1.2.0.1 V5 IDS Network Security Appliance – Intrusion Detection, Revision 3.2, Release 20:

UHS-8270

DES-8270T

AES-8270T

V5 ACS Network Security Appliance – Access Control Revision 3.2 Release 20:

UHS-1401

DES-1401T

AES-1401T

Vindicator UHS-Net Gateways:

UHS-8101 Version 2.33, Build 7 UHS-8102 Version 2.33, Build 6 UHS-8301 Version 2.33, Build 13 UHS-8400 Version 2.33, Build 13 Vindicator UHS-Net Transponder/Gateway Revision 3.3, Release 5:

UHS-1500

DES-1500T

AES-1500T

Vindicator UHS-Net Transponders Version 2.33, Build 13:

UHS-6842

UHS-6842F

DES-6842

DES-6842F

PC SMART PAC Software Package Version 5.1 Proteus 5 & SmartSave 5 Software Programs Version 5.2 Vindicator Command & Control Platform (VCCP) Windows 7(64-bit):

Vindicator Command & Control 2-Version 1.2.1.4 V5 Network Security Application for IDS & ACS-Version 3.2, Release 23 UHS-1500 UHS-Net Field Panel-Version 3.3, Release 7 Security Archive Workstation 2-Version 1.4.2.9 Vindicator Badge Manager 3-Version 2.0.26.7 Vindicator Site Commander-Version 1.3.0.7 Vindicator Area Commander-Version 1.1.0.6 Vindicator Premise Controller-Version 3.3, Release 7 Vindicator PC SMART PAK-Version 6.0.0.1 Vindicator Security Server-Version 1.0

Assessment Subsystems:

Video Servers:

Bosch Allegiant Matrix/Control System LTC 8600 and 8800 Prometheus Security Group Global (PSGG) (Formerly Open Roads Consulting, Inc.) Video Image Control and Display System (VICADS) Version 4.1 Video Management system using Vindicator V5, Version 6 as the annunciator Broadware 4.80 / Cisco 5.1.1. Video Storage System (NOTE: Cisco renamed the 4.80 after purchasing Broadware.)

Video Image Control and Display System (VICADS) Version 4.0 Video Management System PSGG Video Image Control and Display System (VICADS) Version 4.1 Service Pack 1.6 Video Management system using Vindicator V5, Version 6.5 as the annunciator

CUI

PSGG Video Image Control and Display System (VICADS) Version 4.1 Service Pack 1.6 Video Management system using Linx Predator Elite Version 3.2.274p, subpatch p32274.1.13 as the annunciator

PSGG Video Image Control and Display System (VICADS) Version 4.1 Service Pack 2.0 Video Management system using Vindicator VCCP Windows 7 as the annunciator. (Note: DefendIR Thermal imager protocol support, RadarWall, and Geoserver are not approved for use) PSGG Video Image Control and Display System (VICADS) Version 4.1 Service Pack 2.4 Video Management system using Vindicator VCCP Windows 7 as the annunciator. (Note: DefendIR Thermal imager protocol support, RadarWall, and Geoserver are not approved for use.)

PSGG Video Image Control and Display System (VICADS) Version 4.2.7 build 134 using Linx Predator Elite Version 3.3.274p, subpatch p33274.1.13.33 PSGG Video Image Control and Display System (VICADS) Version 4.2.7 build 134 using Vindicator 7 as the annunciator PSGG Video Image Control and Display System (VICADS) Version 4.3.2 using Vindicator (Win 10) PSGG VICADS Version 4.3.4 using Vindicator (Win 10 LTSC 2016, Win Server 2016) Note: For updates from Version 4.3.2 only

Assessment Cameras:

Axis Q1645 Fixed Camera Axis P3245-LVE Axis Q3527-LVE Axis Q6215-LE PTZ Bosch NWC-04-95-20P Internet Protocol (IP) Camera Bosch NWC-04-95-20P (1/3 Format) Bosch NBN-498-21P Internet Protocol (IP) Camera Bosch Auto Dome VG 4-322-ECE1M Bosch Auto Dome VG5-623-ECS Bosch Auto Dome VG5-624-ECS Bosch Auto Dome VG5-724-ECE2 Bosch Auto Dome 7000 Internet Protocol (IP) Camera with environmental housing Bosch Dinion Internet Protocol (IP) 7000 Camera with environmental housing Bosch DINION Internet Protocol (IP) Starlight 7000 HD (NBN-73013-BA) Bosch NBN-63013-B Bosch NBN-71013-B Bosch NBN-71022-B Burle 300H Camera Burle TC 351 Camera (1/2 inch format) Cohu 4865 Camera (WS3) (2/3 inch format) Cohu 48x Camera (KUMMSC) (2/3 inch format) Cohu 4915/4912-3000 Camera (1/2 inch format) Cohu 3930HD Indigo Vision 512147 (PTZ) Indigo Vision 11650-Audio-HD IQ Eye 752 Internet Protocol (IP) Camera Lumenera Le 165M-DN Internet Protocol (IP) Camera Lumenera Le 165ME-DN Internet Protocol (IP) Camera with environmental housing Lumenera Le 165MP-DN Internet Protocol (IP) Camera with environmental housing Pelco ES31CBW35-2N Pan Tilt Zoom (PTZ) System Pelco ES30C/ES31C Pan Tilt Zoom (PTZ) System (1/4 in. format) with/without optional wiper Pelco ES4136-2N Esprit ES system Pan Tilt Zoom system (1/4 in. format) with/without optional wiper

CUI

Pelco MC3651H-2 Interior Camera (1/3 inch format) Pelco IXE20 IP Camera Pelco ES4036-5W Esprit Series, with and without wiper, standard and pressurized Pelco ES40E36-5W Esprit Series, with and without wiper, standard and pressurized Pelco ES40/41 Series Positioning System, Analog, PTZ, w/wo wiper Esprit SE Standard & pressurized, model ES4036-5W Pelco ES40E/41E Series Positioning System, IP, PTZ, w/wo wiper Esprit SE Standard & Pressurized, Model ES40E36-5W Pelco IXE21 Internet Protocol (IP) Pelco P1220-ESR1 (PTZ)

VICON SN680D-B-WNIR (PTZ)

VICON IQ762WI-V6 Internet Protocol (IP) Vivotek IP 7151 Vivotek SD8364E (PTZ) Vivotek IP816A-HP (interior only)

Interior Sensors:

NOTE: Balanced Magnetic Switch (BMS) will not be used as a line of detection.

AN/GPS-15(V) Closed-Shelter Aircraft Sensor (C-SAS) (Volumetric) AN/GSS-20 Volumetric AN/GSS-36(V) Open-Shelter Aircraft Sensor (O-SAS) (Volumetric) AN/GSS-39(V) Interior Intrusion Detection System. Components include:

-- DR-301 -- DR-558 -- DR-851 -- HT-50B

-- HT-50DC -- HT-100B -- HT-100BC -- SDI-76A

-- SD-150EHB -- SRN-2000H

-- SDI-77C -- SD-80B -- SD-80EHB -- SD-150B

AN/GSS-9(V) SA 1955 BMS

Bosch DS 9370 PIR/MW (Volumetric) Bosch DS 939 PIR (Volumetric) Fiber Sensys AP2-20N Passive Infrared (PIR) Fiber Sensys EX-35T Passive Infrared (PIR) General Electric (Sentrol) Model 2507AH-L Wide Gap BMS General Electric (Sentrol) Model 2700 Series BMS General Electric (Sentrol) Model 2800 Series BMS General Electric (Sentrol) Model 2807T Explosion Proof Balanced Magnetic Switch (BMS) General Electric AP669 PIR (Volumetric) Optex Redscan RLS-3060SH Laser Scan Detector (Approved for wall and ceiling configurations) PL&E Communications AVT 234 (VMD) using Dinion analog infrared imagers, for interior applications only SightLogix SightSensor Video Motion Detection (VMD) using NS-90A Thermal Imager, for interior applications only.

Tyco Visonic Disc 360 Passive Infrared Sensor (Ceiling) (Coverage 360 Degree) United Technologies Interlogix AP669 Mirror Optic PIR (Volumetric) Visonic CH-1000 Visonic CH-1000 (Wall) Xtalis ADPRO 18 WH PIR Combination (Ceiling) (Coverage 30’x 30’)

Exterior Sensors:

Birdeye Model IX Infrared Perimeter Detection System, up to 120m Fence Protection System 2-2R (FPS-2-2R)

CUI

Fiber Optics Intrusion Detection System (FO-IDS), Fiber Optic Sensor System (FOSS) Models 100 and Microtrack buried line sensor (NOTE: Not approved for use in Northern tier, or areas where snow and ice accumulations are normal, pending further testing) Perimitrax, Buried Cable Intrusion Detection Sensor Racon Single Stack; Barksdale Configuration - single stack, basket weave configuration with double stacked sensors at the corners Racon Double Stack Racon 16000-4 (Microwave) Sensor Racon 14000-32 Microwave Sensor Racon MPS-4100 (Microwave) Racon MPS-14000-1 (Microwave) Senstar Sentrax Short Ported Coaxial Cable Sensor (SPCS), large and small diameter cable, in the straight-line configuration Southwest Microwave Intrepid Micropoint. (NOTE: Not approved for use in Northern tier, or areas where snow and ice accumulations are normal, pending further testing) tier, or areas where snow and ice accumulations are normal, pending further testing) Southwest Microwave 310 Bi-static Sensor, up to 100m

The following sensors in combination are approved for use as a line of detection with fence climber enhancement detection:

Enhanced DTR-90 Vertical Taut Wire (VTW) Sensor, the DTR 90 “Y” VTW Sensor, or the VTW 400 Sensor installed at the top of the fence with any one of the following sensors installed on the fence: Fiber SenSys Fiber Defender FD300 series. The following models have been tested: 331, 332, 341, and 342.

Fence Protection System 2 (FPS-2) Fence Protection System 2-2R (FPS-2-2R)

Wide Area Detection/Approach Zone Sensors:

PSRS STS-350 (FLIR/ICx) Ground Based Radar used as an approach sensor out to 125 meters (crawlers) as described below: ICX application software version 2.4.41.12 Firmware version 3.4.30 dated November 2, 2007.

PSRS STS-350 (FLIR/ICx) with control station application software version 2.4.41.12 or when integrated with Will Burt Annunciator Version 3.2.274p, subpatch p32274.1.13.

*Wide-area Infrared System for Persistent Surveillance (WISP) Version 2.1 (Note: Tested as standalone wide area detection system; procuring party will be responsible for sustainment cost; Fixed Site Sustainment will not sustain the equipment)

NON-PROCURABLE PL-3 and PL-4 In addition to all of the above components, the following equipment is for use in the protection of PL3 and below assets:

Command, Control Display Equipment (CCDE):

Tass 6.0.1.A Annuciator (At deployed locations only) TASS 7.0 Annunciator (At deployed locations only)

Assessment Subsystems:

DiOP Thermal Imager 180/60mm Thermal Upgrade Kit (TUK) FLIR ThermoVision Multi-Sensor System (a.k.a. SLRTI)

CUI

T-2000 LRTI w/CCTV Complete Kit IBDSS1000-085 T-2000 LRTI w/CCTV TICC/PTH only IBDSS1000-086 T-3000 LRTI w/CCTV Complete Kit FDTA-199 T-3000 LRTI w/CCTV TICC/PTH only Short Range Thermal Imager; Fixed/Mounted (SRTI F/M) Surveillance Thermal Imager (WSTI) Sentry I and Sentry II

Interior Sensors: No Additional Exterior Sensors: No Additional

3. All equipment was determined to meet all applicable TAA/BAA/NDAA requirements at the time of approval. Manufacturers could change place of origin over time. Installation agents should verify place of origin of all components prior to installation.

4. Certified Air Force Test Sites are: Test Area C-3, Eglin AFB, FL and Cold Weather Test Site, Grand Forks AFB, ND are approved for conducting operational tests and evaluations on all IDS equipment.

5. A listing of equipment approved for use in PL-1 Nuclear applications is available in a separate letter maintained by the POC listed below.

6. For additional inquiries, the POC for this effort is Lt. Morgan Huang, AFLCMC/HBUA, morgan.huang.1@us.af.mil.

LINDA W. HAINES, NH-04, DAF

Chief, Force Protection Division

CUI

DISTRIBUTION:

AFDW/A4S

HQ USAFE/A4S

HQ AFMC/A4S

HQ PACAF/A4S

HQ AETC/A4S

HQ AFSFC/S5G

HQ USSF/A4S

HQ AFSOC/A4S

HQ AFRC/A4S

HQ AMC/A4S

HQ ACC/A4S

HQ AFGSC/A3S

NGB/A4S

HQ USAFA/SF

HQ USAF/A4SX

HQ USAF/A4SO

HQ USSF/A4S

HQ AFLCMC/HNC (CCSD)

Controlled by: AFLCMC/HBU Controlled by: AFLCMC/HBUA CUI Category: DoD Critical Infrastructure Security Information Distribution/Dissemination Controls: FEDCON POC: HUANG, MORGAN Lt USAF AFMC AFLCMC/HBUA morgan.huang.1@us.af.mil mailto:morgan.huang.1@us.af.mil