Compliance_Matrix_CQ15012_RSS.pdf

COMPLIANCE MATRIX

Section No. C NC NA

1.0 SCOPE

1.2 General

1.2.1

1.2.2

1.3 Intended Use

1.3.1 Function

1.3.2 Location

1.3.3 Environment

2.0 Applicable Documents

2.1 Industry Standard

3.0 Requirements

3.1 Design And Construction

3.1.1 Material

Pile : 100% Pure Virgin Wool

Backing: 1/8" Thick foam padding; Weight of at least

38 Ounces /Sq. Yd

3.1.2 Construction

3.1.3 Edge Treatment Latex Sealed

3.1.4 Color

3.1.5 Protective Treatment

3.1.5.1 Mothproof, ASTM D1116

COMPLIANCE MATRIX FOR

COMMENTS

RFP CQ15012/RSS - Procure Railcar Carpet

SPECIFICATIONS PACKAGE of

The offeror shall submit the Compliance Matrix with the Technical Proposal. The offeror shall check the 'C'

Compliant, 'NC' Not Compliant, or 'NA' Not Applicable box for each section or sub-section listed. If a box is checked 'NC' or 'NA', then the offeror must provide comments as to why the functional or technical requirement cannot be met (or is not applicable) and propose alternatives, if any, which are equivalent or better for WMATA's consideration.

RAIL TRANSIT CAR CARPET SPECIFICATION (Revised: April 17, 2014)

Section No. C NC NA COMMENTS

3.1.5.2 Prevent Mildew Other Fungi

3.1.6 General Dimemsions 10' X 75 '

3.2 Maintainability

3.3 Functional Characteristics

Fiber Composition AATCC Test Method 20A; 100% wool fiber

Ave. Pile Yarn Weight. ASTM D418; 56.25 Ounces per Sq.

Yard

Tufts/ Sq. Inch ASTM D418; 10 rows/inch. 216 Pitch

Pile Thickenss/Tuft Height ASTM D418; 0.205 inches

Tuft Bind ASTM D1335; 3.8 lbs. min.

Delamination Strength; ASTM D3936; 2.5 psi

Wear Resistsnace ASTM D5252; Rating of 3 minimum on the L, RI-TM101 scale after 12,000 cycles

Shrinkage GSA-FSS-DDD-C-0095; < 1% max., Length or

Width

Colorfastness to Acids and Alkalis - AATCC Test Method 6;

Rating of 2 minimum

Colorfastness to Light AATCC Test Method 16; Rating of 4 minimum.

Colorfastness to Crocking AATCC Test 165; Rating of 4 minimum

Colorfastness to Oxides of Nitrogen. ATCC Test Method

164; Rating of 3 minimum

Colorfastness to Ozone. AATCC Test Method 129; Rating of 3 minimum.

Electrostatic Propensity. AATCC Test Method 134;< 3.5

Kilovolts @ 70 degree F and 20% Relative Humidity

Radiant Panel Test. ASTM E648; CRF 0.5 W/sq.cm.

Smoke Density. ASTM E662; Ds (1.5) S 100 Ds (4.0) S 200

Toxic Gas Sampling . Bombardier SMP- 800 C

CO ppm < 3500

CO2 ppm < 90000

NO2 ppm < 100

SO2 ppm < 100

HCl ppm < 500

Section No. C NC NA COMMENTS

HF ppm < 100

HBr ppm < 100

HCN ppm < 100

4.0 Quality Assurance

4.1 Required Test

4.1.1

4.1.2

4.1.3

4.1.4

4.1.5

4.1.6

QAAW #113.5 Receiving and Inspection

QAAW # 113-06 First Article Inspection

QAAW # 113-19 Suppier Shipping and Delivery

QAAW # 100-8 QAAW Waranty Management Process

4.2 Other Certifications

4.3 Responsibility for Approved Test

4.4 Advance Represenation

Initial Samples at the time of Proposal

Pre-Productions Samples ( see FAI conditions )

5.0

5.1 Packaging and Packing

5.2 Marking and Shipments

6.0 Past Performance and Experience

Name of Authorized Person and Signature

Company Name

Date