Composite Fiberglass Utility Body.xlsx

This specification document outlines requirements for a composite fiberglass utility body to be installed on a 2009 Ford F350SD Super Duty truck. The vehicle is a heavy-duty, four-wheel-drive, dual rear wheel cab and chassis with a 6.4-liter diesel engine and 13,000 GVW rating. The utility body itself measures 132 inches in length, 94 inches in width, and 40 inches in height, featuring fiberglass composite construction with a steel understructure, a 1/8-inch steel treadplate floor, and a 1500-pound capacity liftgate with a 56-inch by 26-inch aluminum platform and tapered ramp. The body includes multiple compartments with specific dimensions and features, including a front transverse compartment accessible from both sides, intermediate shelving compartments on both street and curb sides, horizontal compartments over the wheel wells, and rear compartments with slide-out tool trays on the street side. All compartments include lighting, ventilation, drains, and are equipped with stainless steel latches, hinges, and hardware throughout.

Additional specifications include an FMVSS lighting package with flush-mounted tail and backup lights, a Class IV drop receiver trailer hitch rated for 10,000 pounds, an aluminum fuel fill cone marked for diesel fuel, and a paint exterior in Ford school bus yellow (code 84S53) with white interior compartments. Accessories include wheel chock holders, a backup alarm, a seven-way RV-style trailer connector, and a loose spare tire mount. Installation services are required, with the vehicle to be picked up at the vendor's Augusta location, have all items installed, and be returned to the client in Augusta. All electrical connections must be sealed with heat shrink and protected with heavy-duty wire loom, with no Scotch-Lok connectors permitted. The specification document includes fields for bidder information, unit cost, total cost, contact information, and estimated delivery time, indicating this is a request for quotation or bid.