MRD Surveillance Cameras rev 4Nov26.pdf

Minimum Requirements Document

RFYIF Camera replacement

Document Date: 4 Nov 2026

Requirements/Salient Characteristics:

1) Quantity – 9 units - Bosch FLEXIDOME 8100i NDE-8702-RX Full HD HDR Outdoor Network Camera

i. Type of camera:

1. Fixed outdoor PTRZ IP dome camera with remotely configurable motorized pan, tilt, roll, zoom, and autofocus adjustment capability. The camera shall provide outdoor environmental protection at least IP66 and IP67.

2. The camera shall use at least a 1/1.8-inch CMOS image sensor and provide Full HD 1080p video resolution.

3. The camera shall provide HDR X with a high dynamic range capability of at least 141 dB for operation in high-contrast scenes.

4. The camera shall provide automatic day/night operation using a motorized mechanical IR-cut filter or equivalent capability to transition between daytime color imaging and nighttime monochrome imaging.

5. The camera shall provide at least one RJ-45 Ethernet interface supporting 10/100/1000 Base-T Gigabit Ethernet connectivity and Power over Ethernet (PoE).

6. The camera shall include a motorized varifocal lens with remote zoom and autofocus capability and low-light imaging performance suitable for outdoor surveillance applications.

Note to Offeror: Bosch identifies the NDE-8702-RX as a fixed 2 MP outdoor PTRZ dome with a 1/1.8-inch CMOS sensor, HDR X at 141 dB, a motorized varifocal lens, autofocus, day/night operation, and IP66/IP67/IP6K9K environmental protection.

ii. Air Force and Department of War Physical-Security Directives:

1. The camera and associated video-management, network, storage, installation, and operating processes shall support compliance with applicable Air Force and Department of Defense physical-security, cybersecurity, authorization, and configuration-management requirements.

iii. Security Standards:

1. The camera shall support a hardware-based device-security capability, including a secure element or Trusted Platform Module (TPM), secure boot, signed firmware, and authenticated secure firmware-update capability.

2. The camera shall support password-protected administrative access, encrypted communications, device certificates, and HTTPS or equivalent encrypted management communications.

3. The camera shall support cybersecurity configuration and device hardening consistent with the deployed Bosch firmware version, Government network architecture, approved cybersecurity baseline, and video-management-system configuration.

4. The camera shall provide embedded Bosch IVA Pro Buildings and Bosch IVA Pro Perimeter analytics, or equivalent embedded analytics, supporting: Motion and tamper-related event detection; Object detection and classification; Intrusion or object-in-area monitoring; Line-crossing detection; Loitering or time-in-area detection; and other compatible perimeter and object-based analytics supported by the deployed Government video-management system.

5. Analytics integration, event notification, metadata handling, and recording behavior shall be compatible with the Government video-management system or validated during technical evaluation.

Note to Offeror: Bosch documentation for the FLEXIDOME 8100i X-series identifies device-security features, secure firmware protections, encrypted communications, and IVA Pro Buildings/Perimeter analytics capabilities.

iv. Known acceptable product-reference verification:

1. The Government reviewed the manufacturer technical documentation for Bosch

FLEXIDOME 8100i X-series models NDE-8702-RX and NDE-8703-RX. The cited manufacturer documentation indicates that these models support connection to a 10/100/1000 Base-T network through an RJ-45 network connection.

v. Source documents:

1. Bosch, NDE-8702-RX Product Data Sheet, document revision/date as shown on the manufacturer-issued document, applicable technical-specifications section.

2. Bosch, NDE-8703-RX Product Data Sheet, document revision/date as shown on the manufacturer-issued document, applicable technical-specifications section.

3. Bosch, FLEXIDOME 8100i / FLEXIDOME 8100i X Series Installation Manual, document F.01U.411.088, 2024-11, V01, applicable network-connection section.

vi. Alternate Product Verification:

1. The cited Bosch models are reference products previously determined to meet the stated minimum requirements. Offerors may propose other products; however, proposed alternatives are subject to verification against all minimum requirements.

2.) Quantity – 4 units - Axis Communications P5654-E Mk II 1080p Outdoor PTZ Network Dome Camera (60 Hz)

i. Type of camera:

1. Outdoor PTZ IP dome camera capable of remote pan, tilt, zoom, and focus adjustment.

2. The camera shall provide HDTV 1080p video resolution; Continuous 360-degree pan capability; Tilt capability of approximately ±90 degrees; Minimum 21x optical zoom;

Autofocus or focus-recall capability; and outdoor environmental protection rated at least IP66, with vandal resistance rated at least IK10.

3. The camera shall provide Forensic Wide Dynamic Range or equivalent capability for operation in high-contrast and challenging lighting conditions.

4. The camera shall provide automatic day/night functionality with an automatically removable infrared-cut filter, or equivalent day/night imaging capability.

5. The camera shall provide at least one RJ-45 Ethernet interface supporting 10BASE- T/100BASE-TX connectivity and Power over Ethernet (PoE).

ii. Air Force and Department of War Physical Security Directives:

1. System-Level Compliance: The camera and associated video-management, network, storage, installation, and operating processes shall support compliance with applicable Air Force and Department of Defense physical-security, cybersecurity, authorization, and configuration-management requirements.

iii. Security Standards:

1. The camera shall support signed firmware and secure boot, or equivalent mechanisms that verify firmware integrity and help prevent operation of unauthorized or altered firmware.

2. The camera shall support password-protected administrative access and encrypted management communications using HTTPS or equivalent secure communications protocols. The camera shall support secure configuration and hardening consistent with the deployed AXIS OS version, Government network architecture, and approved cybersecurity baseline.

3. The camera shall support embedded video analytics that include, at a minimum:

Video motion detection; Shock detection or equivalent physical-tamper alarm capability;

Object detection and classification for people and vehicles; and automated PTZ tracking, zooming, or notification functions based on detected objects in predefined areas.

4. Preferred analytics include intrusion/fence monitoring, loitering detection, line-crossing detection, and other compatible analytics when supported by the deployed firmware and Government video-management system.

Note to Offeror: Axis identifies the P5654-E Mk II as an outdoor 1080p PTZ camera with 360-degree continuous pan, ±90-degree tilt, 21x optical zoom, Forensic WDR, day/night capability, IP66 and IK10 ratings, Axis Edge Vault, signed firmware, secure boot, object classification, shock detection, and Advanced Gatekeeper functionality

iv. Known Acceptable Product-Reference Verification:

1. The Government reviewed manufacturer technical documentation for the AXIS P5654-E Mk II PTZ Camera, 60 Hz. The cited manufacturer documentation indicates that the camera provides a shielded RJ-45 Ethernet network connection supporting 10BASE-T/100BASE-TX connectivity and Power over Ethernet (PoE). The camera does not claim 10/100/1000 Base-T/Gigabit Ethernet connectivity.

2. The cited manufacturer documentation further identifies the AXIS P5654-E Mk II as an outdoor HDTV 1080p PTZ camera with continuous pan, tilt, optical zoom, autofocus, automatic day/night capability, Lightfinder 2.0, Forensic WDR, signed firmware, secure boot, and supported embedded analytics.

v. Source Documents:

1. Axis Communications, AXIS P5654-E Mk II PTZ Camera Data Sheet, document revision/date as shown on the manufacturer-issued document, applicable camera, image, network, cybersecurity, and analytics technical-specifications sections.

2. Axis Communications, AXIS P5654-E Mk II PTZ Camera User Manual, document T10200256, current manufacturer-issued revision, applicable administrator-account, network, PTZ, video, analytics, and device-configuration sections.

3. Axis Communications, AXIS P56 PTZ Camera Series product documentation page, applicable AXIS P5654-E Mk II product-datasheet, user-manual, installation-guide, and software-support links.

vi. Alternate Product Verification:

1. The cited Axis models are reference products previously determined to meet the

3.) Quantity – 3 units - Axis Communications M5526-E 4MP Outdoor PTZ Network Dome

Camera.

i. Type of camera:

1. Outdoor PTZ IP dome camera capable of remotely configurable continuous pan, tilt, zoom, and focus adjustment.

2. The camera shall provide Continuous 360-degree pan; Tilt range of approximately 0 to 90 degrees; Minimum 10x optical zoom; Autofocus capability; Outdoor environmental protection rated at least IP66; and Vandal resistance rated at least

IK10.

3. The camera shall use a progressive-scan RGB CMOS image sensor and capture video at a minimum resolution of 2688 × 1512 at up to 60 frames per second for a 60 Hz model. The camera shall include a 4.7–47 mm varifocal lens providing an approximately 59.1° to 6.5° horizontal field of view.

4. The camera shall provide automatic day/night operation using an automatic removable infrared-cut filter or equivalent capability.

5. The camera shall provide Lightfinder 2.0 and Forensic Wide Dynamic Range (WDR), or equivalent low-light and high-contrast imaging capability.

6. The camera shall provide at least one shielded RJ-45 Ethernet interface supporting 10BASE-T/100BASE-TX connectivity and Power over Ethernet (PoE).

ii. Air Force and Department of Defense Physical-Security Directives:

1. System-Level Compliance: The camera, supporting network, video-management system, storage, installation, configuration, and operating procedures shall support compliance with applicable Air Force and Department of Defense physical-security, cybersecurity, authorization, and configuration-management requirements.

iii. Security Standards:

1. The camera shall support a hardware-based device-security capability, secure boot, signed operating-system or firmware images, and a mechanism to validate authorized firmware before operation.

2. The camera shall support: Password-protected administrator access; HTTPS or equivalent encrypted management communications; Secure firmware or operating-system update capability; Device-security status monitoring; and Configuration and hardening consistent with the deployed AXIS OS version, Government network architecture, and approved cybersecurity baseline.

3. The camera shall include embedded video analytics capable of: Video motion detection; Active tampering alarm; Object detection and classification; Line-crossing detection; Object-in-area or intrusion-area detection; and Time-in-area or loitering-equivalent detection.

4. Analytics shall be compatible with the Government video-management system or otherwise be capable of integration through approved interfaces.

iv. Known Acceptable Product-Reference Verification:

1. The Government reviewed manufacturer technical documentation for the AXIS

M5526-E PTZ Camera, 60 Hz. The cited manufacturer documentation indicates that the camera provides a shielded RJ-45 Ethernet network connection supporting 10BASE-T/100BASE-TX connectivity and Power over Ethernet (PoE). The camera does not require or claim 10/100/1000 Base-T connectivity.

2. The cited manufacturer documentation further identifies the AXIS M5526-E as an outdoor 4 MP PTZ camera with continuous 360-degree pan, 10x optical zoom, autofocus, 2688 × 1512 resolution at up to 60 frames per second for the 60 Hz version, automatic IR-cut filtering, Lightfinder 2.0, Forensic WDR, and embedded analytics.

v. Source Documents:

1. Axis Communications, AXIS M5526-E PTZ Camera Data Sheet, document

T10194184/EN/M9.2/202504, applicable camera, image, network, cybersecurity, and analytics technical-specifications sections.

2. Axis Communications, AXIS M5526-E PTZ Camera User Manual, document T10194183, current manufacturer-issued revision, applicable administrator-account, network, video, analytics, and device-configuration sections.

3. Axis Communications, AXIS M55 PTZ Camera Series product documentation page, applicable AXIS M5526-E product-datasheet and installation-guide links.

vi. Alternate Product Verification:

1. The cited Axis models are reference products previously determined to meet the

4.) Quantity – 30 units - Bosch NDI-3702-AL-GOV FLEXIDOME 3100i 2MP Indoor Network Dome Camera with Night Vision

i. Type of camera:

1. Fixed indoor IP dome camera with integrated infrared illumination for day/night surveillance. The camera shall provide at least 2 MP resolution and integrated IR illumination suitable for indoor low-light operation.

2. The camera shall use at least a 1/2.8-inch progressive-scan CMOS sensor and provide 1920 × 1080 (1080p) resolution at up to 30 frames per second.

3. The camera shall provide automatic day/night functionality using a motorized infrared-cut filter or equivalent mechanism to transition between daytime color imaging and nighttime monochrome/IR imaging.

4. The camera shall include a 3.3–10.2 mm motorized varifocal, IR-corrected lens suitable for use with integrated IR illumination.

5. The camera shall provide integrated IR illumination with a minimum effective range of approximately 30 m (98 ft) under manufacturer-specified operating conditions.

6. The camera shall provide embedded video analytics, including IVA Pro Buildings or equivalent analytics supporting AI-based detection of persons and vehicles.

Note to Offeror: Bosch identifies the NDI-3702-AL-GOV as a fixed 2 MP indoor IR dome camera with a 1/2.8-inch CMOS sensor, 1080p video at up to 30 fps, a 3.3–10.2 mm motorized IR-corrected varifocal lens, integrated IR illumination, a motorized IR-cut filter, and IVA Pro Buildings analytics.

ii. Air Force and Department of Defense Physical-Security Directives:

1. System-Level Compliance: The camera, supporting network, video-management system (VMS), recording/storage system, installation, device configuration, and operating procedures shall support compliance with applicable Air Force and Department of Defense physical-security, cybersecurity, authorization, and configuration-management requirements.

iii. Security and Network Capabilities:

1. The camera shall support a built-in Secure Element with Trusted Platform Module

(TPM) functionality or equivalent hardware-based device-security capability.

2. The camera shall support signed firmware, secure boot, HTTPS-protected communications, and authenticated secure firmware-upload capability.

3. The camera shall provide at least one RJ-45 Ethernet interface supporting 10BASE-

T/100BASE-TX connectivity and Power over Ethernet (PoE).

4. The camera shall support device hardening and cybersecurity configuration consistent with the deployed firmware version, approved network architecture, and Government security baseline.

Note to Offeror: Bosch lists a Secure Element with TPM functionality, signed firmware, secure boot, HTTPS-protected communication, authenticated secure firmware uploads, and 10/100 Base-T Ethernet capability for this model.

iv. Video Recording and Retention:

1. The Government’s existing video-management system (VMS), network video recorder (NVR), and associated storage infrastructure will provide continuous video recording and a minimum of 30 calendar days of video retention.

2. Offerors are not required to provide, or size on-camera microSD storage to meet the 30-day recording-retention requirement.

3. Proposed cameras shall support integration with the Government’s existing VMS and recording environment in accordance with the solicitation’s applicable interoperability, network, codec, and configuration requirements.

4. If included, on-camera storage may be used for edge recording, temporary buffering, recording continuity, or other camera-supported functions, but it is not required to satisfy the 30-day retention requirement.

v. Known Acceptable Product-Reference Verification:

1. The Government reviewed manufacturer technical documentation for the Bosch NDI-

3702-AL-GOV FLEXIDOME indoor 3100i IR fixed dome camera. The cited manufacturer documentation indicates that the camera provides an RJ-45 Ethernet network connection supporting 10BASE-T/100BASE-TX connectivity and Power over Ethernet (PoE). The camera does not require or claim 10/100/1000 Base- T/Gigabit Ethernet connectivity.

2. The cited manufacturer documentation further identifies the NDI-3702-AL-GOV as a fixed indoor 2 MP IR network dome camera with a 1/2.8-inch CMOS sensor, 1920 × 1080 resolution at up to 30 frames per second, a 3.3–10.2 mm motorized IR-corrected varifocal lens, integrated IR illumination, automatic day/night operation with an IR-cut filter, and IVA Pro Buildings embedded video analytics.

3. The camera includes a memory-card slot and a limited internal pre-alarm recording capability. However, per the Government’s response to the vendor question, the Government’s existing video-management and recording equipment will provide the required recording and retention capability. Offerors are not required to furnish on-camera microSD storage to meet the 30-day retention requirement.

vi. Source Documents:

1. Bosch Security Systems / Keenfinity, Video – NDI-3702-AL-GOV Fixed dome 2MP

3.3–10.2 mm IR GOV, Product Data Sheet, current manufacturer-issued revision, applicable camera, imaging, lens, infrared, network, cybersecurity, storage, and analytics technical-specifications sections.

2. Bosch Security Systems, FLEXIDOME indoor 3100i / FLEXIDOME indoor 3100i IR Quick Installation Guide, document F.01U.406.607, 2024.01, V02, applicable model-identification, mounting, and PoE network-connection sections.

3. Keenfinity Commerce, FLEXIDOME indoor 3100i IR—NDI-3702-AL-GOV product page, applicable product-description, technical-specifications, and manufacturer-documentation links.

vii. Alternate Product Verification:

1. The cited Bosch models are reference products previously determined to meet the

5.) Mounting Equipment and Installation Hardware Offerors shall provide the following mounting equipment, or manufacturer-compatible equivalent, as part of the total offered solution:

1. Quantity 9 - Bosch Pendant Arm for AUTODOME 7100i, MFR #NDA-7100-PEN, or like/similar manufacturer-compatible pendant arm.

2. Quantity 4 - Axis Communications TQ5001-E Wall-and-Pole Mount, MFR #02411-

001, or like/similar manufacturer-compatible wall-and-pole mount.

3. Quantity 4 - Axis Communications T94A01D Pendant Kit, MFR #5502-431, or like/similar manufacturer-compatible pendant kit.

4. Quantity 10 - Bosch NDA-3083-LWMT L-Shaped Wall Mount for Dome Cameras, Signal White, MFR #NDA-3083-LWMT, or like/similar manufacturer-compatible wall mount.

5. Quantity 2 - Bosch Universal Pipe Mount Pipe Extension, 20-inch, White, MFR #NDA-U-PMTE, or like/similar manufacturer-compatible pipe extension.

6. Quantity 4 - Bosch NDA-U-PSMB Pendant Wall/Ceiling Mount, MFR #NDA-U- PSMB, or like/similar manufacturer-compatible pendant wall/ceiling mount.

7. Quantity 4 - Bosch NDA-U-WMT Universal Pendant Wall Mount, White, MFR #NDA-U-WMT, or like/similar manufacturer-compatible pendant wall mount.

8. Quantity 10 - Bosch NDA-3083-PLEN In-Ceiling Plenum Kit, MFR #NDA-3083- PLEN, or like/similar manufacturer-compatible in-ceiling plenum kit.

9. Quantity 2 - Bosch NDA-U-PMT Pendant Pipe Mount, or like/similar manufacturer-compatible base mount, for use with the required Bosch NDA-U-PMTE pipe extensions.

10. Quantity 4 - Compatible 1.5-inch NPS pipe bracket, or like/similar manufacturer-compatible mounting component, for use with the required Axis T94A01D pendant kits.

11. Quantity 9 - Bosch NDA-8000-PIP Pendant Interface Plate, or like/similar manufacturer-compatible pendant interface plate, for installation of the FLEXIDOME 8100i cameras with the required pendant-arm configuration.

Complete Mounting Configuration The Government does not intend for offerors to assume that base mounts, pipe brackets, adapters, or other mounting hardware not explicitly identified in the original list are Government-furnished equipment.

Offerors shall include the applicable manufacturer-compatible base mounts and associated hardware necessary to install and make operational the required pipe extensions, pendant kits, pendant interface plates, pendant arms, and cameras.

Offerors shall also include any manufacturer-required adapters, fasteners, couplers, or other interface hardware necessary to ensure physical and functional compatibility between the proposed FLEXIDOME 8100i cameras, pendant interface plates, pendant arms, and mounting surfaces.

All mounting components shall be compatible with the proposed camera model and with each other.

The total offered price shall include all hardware necessary for a complete, functional, and installable mounting configuration.