Combo Solicitation-Synopsis_ColdWork Equipment (Brand Name).pdf

Combined Synopsis/Solicitation

(IAW FAR 12.603)

Solicitation Number: FA8125-20-Q-0080

Cold Work Equipment (Brand Name – Fatigue Technology)

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart

12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.

This solicitation is being issued as a request for quotation (RFQ) IAW FAR Part 13. The government intends to award a firm-fixed price (FFP) contract for Cold Work Equipment (Brand Name – Fatigue Technology). All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency.

This solicitation document and incorporated provisions and clauses are those in effect through the Federal

Acquisition Circular (FAC) 2020-01, Defense Federal Acquisition Regulation Supplement Change Notice (DPN)

20190531, and Air Force Acquisition Circular (AFAC) 2019-1001.

The Air Force Sustainment Center (AFSC/PZIMA) at Tinker Air Force Base Oklahoma, intends to award one firm fixed price contract, for the acquisition of material listed below.

This is a 100% Small Business Set-aside

The NAICS Code is: 336413 and the Size Standard: 1,250

CONTACT INFORMATION:

Quotations are due by: 10:00AM Central Standard Time (CST) on 27 April 2020. Contact the following for any additional questions regarding this solicitation:

Mr. Shane Washburn, Contract Specialist, 405-622-7837

Please email quotes to: shane.washburn.5@us.af.mil

CONTRACT LINE ITEMS (CLINS):

Note: All CLINs are Firm Fixed Price (FFP)

CLIN PART NUMBER/NOUN QUANTITY UNIT OF ISSUE

DELIVERY

DATE

ForceMate procedure and parts list of the B-

52 Strut Attachment Rework Kit Coldwork

Process. Tooling requirements for the

Coldwork equipment must be IAW the Item

Description. (Fatigue Technology Brand

Name)

1 EA 14 Week(s) ARO

DESCRIPTION OF ITEM(s):

76 CMXG is requesting the Brand Name purchase of Fatigue Technology cold work equipment in accordance with

(IAW) engineering drawings, Drawing 520-11176, and technical data T.O. 1B-52G-23 tooling requirements defined in the ForceMate procedure and parts list of the B-52 Strut Attachment Rework Kit Coldwork Process. Tooling requirements for the Coldwork process are as follows:

mailto:shane.washburn.5@us.af.mil

1 ea. FSR-101-10110-B Multi-System Cutting Tool

1 ea. FMM-101-25060-A ForceMate Mandrel

1 ea. 2020-898 Multi-System Gage

1 ea. FIG-101-40010-A ForceMate Gage

1 ea. 1045-171 DRIVER, MANDREL

1 ea. FST-101-75010-A ForceMate Cutting Tool

1 ea. 3119-002 Multi-System Cutting Tool

1 ea. FSA-101-20003-A ForceMate Support Assembly

1 ea. FSG-101-35110-A ForceMate Gage

1 ea. 2020-899 Multi-System Gage

1 ea. FST-102-75010-A ForceMate Cutting Tool

1 ea. 1013-017 Multi-System Cutting Tool

1 ea. 1013-019 Multi-System Cutting Tool

1 ea. 1013-018 Multi-System Cutting Tool

1 ea. 1013-021Multi-System Cutting Tool

1 ea. FSR-101-10012-A Multi-System Cutting Tool

1 ea. FSR-101-10112-B Multi-System Cutting Tool

1 ea. FSR-101-10011-A Multi-System Cutting Tool

1 ea. FSR-101-10111-B Multi-System Cutting Tool

1 ea. FSG-101-35010-A ForceMate Gage

1 ea. FMM-101-25030-A ForceMate Mandrel

1 ea. Fl G-102-40020-A ForceMate Gage

1 ea. 1045-166 STONES, HONE

1 ea. 3120-003 PILOT

1 ea. FSA-101-20001-B ForceMate Support Assembly

1 ea. FSR-101-10020-B Multi-System Cutting Tool

1 ea. FSR-101-10120-B Multi-System Cutting Tool

1 ea. 1013-023 Multi-System Cutting Tool

1 ea. 1013-025 Multi-System Cutting Tool

1 ea. 1013-024 Multi-System Cutting Tool

1 ea. 1013-026 Multi-System Cutting Tool

1 ea. FSR-101-10022-A Multi-System Cutting Tool

1 ea. FSR-101-10122-A Multi-System Cutting Tool

1 ea. FSR-101-10021-A Multi-System Cutting Tool

1 ea. FSR-101-10121-A Multi-System Cutting Tool

1 ea. FSG-104-35040-A ForceMate Gage

1 ea. FSG-104-35140-A ForceMate Gage

1 ea. 2020-900 Multi-System Gage

1 ea. 2196-005 ForceMate Gage

1 ea. 1045-152 MANDREL, HONE

1 ea. FST-104-75010-A ForceMate Cutting Tool

1 ea. 3119-004 Multi-System Cutting Tool

1 ea. FMC-M ForceMate Nosecap

1 ea. FMJ-101-55002-A Multi-System Nosecap

1 ea. FSA-101-20002-B ForceMate Support Assembly

1 ea. MB-70 Multi-System Puller Unit

DELIVERY INFORMATION:

FOB Destination to Tinker AFB, OK 73145. Shipping must be included in price. Net 30.

The Contractor shall deliver all items described above to:

F3YCEB

COMMODITY SURVEILLANCE TEAM

OC ALC/OBCB

BLDG 3001 STAFF DR | DOOR G70 POST N68

TINKER AFB, OK-73145

405-734-0902

TERMS AND CONDITIONS

Please note provisions by reference carry the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make the full text available.

The full text of a clause may be accessed electronically at this/these address:

Regulations URLs: (Click on the appropriate regulation.)

https://www.acquisition.gov/browse/index/far https://www.acquisition.gov/dfars https://www.acquisition.gov/affars

FAR 52.212-1 - Instructions to Offerors – Instructions to Offerors -- Commercial, applies to this acquisition.

Addendum to FAR 52.212-1 Instructions to Offerors -- Commercial Items

General Information: The Government plans to issue a single purchase order for the Coldwork Equipment

(Fatigue Technology Brand Name. This is a firm-fixed-price type contract. The Contracting Officer (CO) is the sole point of contact for this acquisition. Address any questions or concerns you may have to the CO. Written requests for clarification may be sent to the CO at the address located in the contact information at the bottom of the

Combined Synopsis/Solicitation.

An Ombudsman has been appointed to hear concerns from interested vendors during the proposal development phase of this acquisition. The Ombudsman for this acquisition is AFSC/PZC. This does not diminish the authority of the program director or CO, but communicates vendor concerns, issues, disagreements and recommendations to the appropriate Government personnel. When requested, the Ombudsman shall maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of quotations; interested parties are invited to call AFSC/PZC at 405-736-3273.

General Instructions: This acquisition will be conducted under the procedures of FAR Part 12 -- Commercial

Items and FAR Part 13 -- Simplified Acquisition Procedures. This acquisition will utilize technical acceptability and price as evaluation factors. Award will be made to the vendor who is technically acceptable with the lowest total evaluated price (TEP) and whose quote conforms to the solicitation requirements (to include all stated terms, conditions, representations, and certifications).

Vendors shall complete provisions/clauses as required. Vendors must complete the annual representations and certifications electronically via the System for Award Management (SAM) at https://www.sam.gov. After reviewing the SAM information, the vendor verifies by submission of their quotation that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications -

Commercial Items, are correct.

Tailored Instructions (FAR 52.212-1):

(a) North American Industry Classification System (NAICS) code and small business size standard. The

NAICS code and small business size standard for this acquisition appear at the top of the CSS (336413, size standard 1,250) of the solicitation cover sheet of this solicitation. However, the small business size standard for a concern which submits a quotation in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees.

(b) Submission of quotations. Submit quotations to the office specified in this solicitation at or before the exact time specified in this solicitation. Quotations may be submitted on the solicitation, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, quotations must show--

(1) The solicitation number;

https://www.acquisition.gov/browse/index/far https://www.sam.gov/

(2) The time specified in the solicitation for receipt of quotations;

(3) The name, address, and telephone number of the vendor;

(4) A technical description of the items being quoted in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms;

(7) “Remit to” address, if different than mailing address;

(8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the vendor shall complete electronically);

(9) Acknowledgment of Solicitation Amendments;

(10) Reserved; and

(11) If the quotation is not submitted on a Standard Form (SF) 1449, Solicitation/Contract/Order for Commercial

Items, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Quotations that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.

(c) Reserved.

(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of quotations. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender’s request and expense, unless they are destroyed during pre-award testing.

(e) Multiple quotations. Vendors are encouraged to submit multiple quotations presenting alternative terms and conditions, including alternative line items (provided that the alternative line items are consistent with subpart 4.10 of the Federal Acquisition Regulation), or alternative commercial items for satisfying the requirements of this solicitation. Each quotation submitted will be evaluated separately.

(f) Late submissions, modifications, revisions, and withdrawals of quotations. We must receive your quotation at the address specified in the Contact Information section by the deadline specified in the Contact Information

Section (4/27/2020 @ 10:00 AM) We will not consider any quotation that we receive after the deadline unless we receive it before we issue a purchase order and considering it will not unduly delay our purchase. In case of an emergency that delays our operations and makes submission or receipt of your quotation impossible, we will extend the deadline by one working day.

(g) Issuance of purchase order. The Government intends to evaluate quotations and issue a purchase order without interchanges. Therefore, the vendor’s initial quotation should contain the vendor’s best terms from a price and technical standpoint. However, the Government reserves the right to conduct interchanges with one, some, or all vendors if later determined by the Contracting Officer to be necessary. The Government may waive informalities and minor irregularities in quotations received. The Government reserves the right to reject any or all quotations, if such action is in the public interest.

(h) Multiple purchase orders. The Government may issue purchase orders for any item or group of items of a quotation, unless the vendor qualifies the quotation by specific limitations. Unless otherwise provided in the

Schedule, quotations may not be submitted for quantities less than those specified. The Government reserves the right to issue a purchase order for a quantity less than the quantity quoted, at the unit price(s) quoted, unless the vendor specifies otherwise in the quotation.

(i) Availability of requirements documents cited in the solicitation. If the descriptions in this solicitation refer to any Government specification, standard, or commercial item description, you may obtain a copy of any such documents from the places listed in FAR 52.212-1, paragraph (i).

(j) Unique Entity Identifier (UEI). Applies to all quotations submitted in response to solicitations that require the vendor to be registered in the System for Award Management (SAM) database. Place your UEI that identifies the vendor’s name and address in (CAGE code or DUNS). Also, if applicable, place your Electronic Funds Transfer

(EFT) indicator in the CSS response page. If you do not have a UEI, see FAR 52.212-1 paragraph (j) for instructions.

(k) Reserved.

(l) Notification to Unsuccessful Vendors. When the issuance of a purchase order is based on evaluation factors other than price alone, the Contracting Officer shall furnish the information described in FAR 15.503(b)(1) upon vendor request.

FAR 52.212-2 - Evaluation Commercial items, Evaluation -- Commercial Items, (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be https://www.acquisition.gov/sites/default/files/current/far/html/52_212_213.html#wp1179194 https://www.acquisition.gov/sites/default/files/current/far/html/52_212_213.html#wp1179194 most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

1. Basis for Contract Award:

The Award will be conducted and evaluated under the provisions of FAR Part 12, Commercial Items and FAR

Part 13, Simplified Acquisition Procedures. This acquisition will utilize Lowest Price Technically Acceptable

(LPTA) source selection procedures. Technical tradeoffs will not be made and no additional credit will be given for exceeding acceptability. Award will be made to the acceptable offeror with the lowest evaluated cost or price, which is deemed responsible in accordance with the Federal Acquisition Regulation and whose proposal conforms to the solicitation requirements. The solicitation requirements include all stated terms, conditions, representations, certifications, and all other information required by FAR 52.212-1 of this solicitation. The

Government reserves the right to award without clarifications. However, the Government reserves the right to conduct interchanges if determined necessary by the Contracting Officer.

The responsible offerors must be registered in the System for Award Management (SAM) database. Lack of registration in SAM will disqualify the vendor and declare them ineligible for award.

The Oklahoma City‐Air Logistics Center (AFSC/PZIMA) at Tinker Air Force Base Oklahoma intends to award a commercial firm fixed price contract for this acquisition.

2. Number of Contracts to be Awarded:

The Government intends to select one contractor for the award. However, the Government reserves the right to award no contract at all; depending on the quality of the proposals, prices submitted and the availability of funds, or other factors identified by the Contracting Officer.

3. Rejection of Unreasonable Offers:

The Government may reject any proposal that is evaluated to be unrealistic in terms of program commitments, including contract terms and conditions, or unrealistically high or low in cost/price when compared to

Government estimates, such that the proposal is deemed to reflect an inherent lack of competence or failure to comprehend the complexity and risks of the program, item or service.

4. Correction Potential of Proposals:

The Government will consider, throughout the evaluation, the "correction potential" of any proposal uncertainty. The judgment of such "correction potential" is within the sole discretion of the Government. If an aspect of an offeror's proposal not meeting the Government's requirements is not considered correctable, the offeror may be eliminated from the competitive range.

5. Evaluation Factors

Factor 1—Technical Proposal

Factor 2—Cost/Price

- Evaluation Methodology:

The Government will evaluate all technical factors concurrently for the three (3) lowest priced proposals.

Should one of those three (3) proposals not be found technically acceptable, the next one (1) lowest priced offeror will be reviewed for technical acceptance Then, price will be evaluated and the proposals will be listed from lowest to highest price based on the total evaluated price either initially or as a result of clarifications.

Award will be made to the lowest evaluated priced proposal meeting the acceptability standards for the non-cost factors.

1) Technical Factor:

Acceptable – The proposal meets specified minimum technical evaluation requirements necessary for acceptable contract performance.

Unacceptable – The proposal fails to meet specified minimum technical evaluation requirements necessary for contract performance. Proposals with an unacceptable rating are not awardable.

Technical acceptability will be based on an evaluation of proposals against the criteria stated below and other technical specifications in the Item Description. Offerors are required to present all the information as stated in the Instructions to Offerors, FAR 52.212-1. The minimum technical evaluation requirement is met when the Offeror’s proposal thoroughly substantiates all the following essential criteria:

CONTRACTOR MUST PROVIDE COMMERCIAL LITERATURE OR A

WRITTEN STATEMENT TO EXPLAIN HOW THEY ARE MEETING THE

TECHNICAL EVALUATION CRITERIA WITH THE QUOTE.

2) Cost/Price Factor:

Cost/Price Evaluation: The offeror's cost/price proposal will be evaluated for award purposes by adding the total price for basic requirements (basic award).

Total Evaluated Price: Price analysis will be performed to determine the reasonableness of the offeror's price proposal. Reasonableness will be based on the total evaluated price. The total evaluated price will be calculated as the sum of the Contract Line Item Numbers (CLINs) unit/extended prices plus other associated factors such as: first article testing cost, transportation cost, price evaluation adjustments for

Small Disadvantaged Business Concerns, and application of labor hours to labor hour rates, etc.

Price Realism: The Government intends to determine price realism based on adequate price competition.

In the event the Government cannot determine price realism based on adequate price competition, the

Government reserves the right to conduct a more detailed price realism evaluation using one or more of the price analysis techniques described in FAR 15.404-1(b)(2). The Government may also use other evaluation techniques, as needed. To be realistic, the proposed price must demonstrate an adequate understanding of the requirement. Quoted prices that are determined to be unrealistically low due to an inadequate understanding of the requirement will make the quotation ineligible for award.

Unreasonably Low Costs or Prices: Unreasonably low proposed costs or prices, initially or subsequently, may be grounds for eliminating a proposal from competition either on the basis that the offeror does not understand the requirement or the offeror has made an unrealistic proposal.

Unbalanced Pricing: Offerors are cautioned against submitting an offer that contains unbalanced pricing.

Unbalanced pricing may increase performance risk and could result in payment of unreasonably high prices. Unbalanced pricing exists when, despite an acceptable total evaluated price, the price of one or more contract line items is significantly over or understated as indicated by the application of cost or price analysis techniques. The Government shall analyze offers to determine whether they are unbalanced with respect to separately priced line items or subline items. Offers that are determined to be unbalanced may be rejected if the contracting officer determines that the lack of balance poses an unacceptable risk to the

Government.

6. Determination of Contractor Responsibility

To be eligible for award, an offeror must be determined responsible. A Determination of Contractor Responsibility will be conducted in accordance with FAR 9.1 (SAM and FAPIIS). An offeror who receives a determination of non-responsibility will not be eligible to receive the contract award.

7. Interchanges

In accordance with FAR 1.102-2(c)(3) the Government shall exercise discretion, use sound business judgement, and comply with applicable laws and regulations during the course of this acquisition. The Government intends to award without interchanges, but reserves the right to conduct interchanges if necessary. Therefore, it is imperative that vendors submit their best terms initially. If during the evaluation of quotations it is determined to be in the best interest of the Government to conduct interchanges, the Contracting Officer may conduct interchanges with one, some, or all vendors before issuing any purchase order.

Interchanges are information sharing between the Government and vendors after receipt of quotations which can be conducted to address any aspect of the quotation. Interchanges may be oral or written. Written interchanges take the form of Interchange Notices (IN)s. INs are used to accurately capture contemporaneous sharing of information.

If interchanges are conducted, the Government may request final quotation revisions at the conclusion of interchanges.

8. Solicitation Requirements, Terms, and Conditions

Offerors are required to meet all solicitation requirements, such as terms and conditions, representations and certifications, and technical requirements, in addition to those identified as evaluation factors or sub-factors, and all technical specifications of the item description. Failure to meet a requirement may result in an offer being ineligible for award. Offerors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. In the case that a discrepancy exist between the Instruction to Offerors (ITO) and the evaluation factors for award, the evaluation criteria in 52.212-2 will take precedence.

52.212-3 - Offeror Representations and Certifications -- Commercial Item

The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at http://www.sam.gov/portal (Only complete and return if there are changes to current SAM Registration. If 52.212-3 is not returned the contractor is affirming that the current SAM registration is current, accurate, and complete). If the

Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision.

52.212-4 - Contract Terms and Conditions -- Commercial Items, applies to this acquisition.

52.212-4 - Addendum -- (a) The Contractor agrees that the supplies or services furnished under this contract shall be covered by the most favorable commercial warranties the Contractor gives to any customer for such supplies or services and that the rights and remedies provided herein are in addition to and do not limit any rights afforded to the

Government by any other clause of this contract. (b) The Contractor shall provide a copy of the applicable commercial warranty with each item covered by such a warranty, at no additional cost to the Government. A copy of the warranty proposed shall be provided with the offer.

52.212-5 - Contract Terms and Conditions Required to Implement Statues or Executive Orders—Commercial Items, applies to this acquisition.

The following clauses/provisions within 52.212-5 are included but not limited to:

52.204-10 - Reporting Executive Compensation and First-Tier Subcontract

52.209-6 - Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or

Proposed for Debarment

52.219-6 - Notice of Total Small Business Set-Aside

52.219-13 - Notice of Set-Aside of Orders

52.219-28 - Post Award Small Business Program Representation

52.222-3 - Convict Labor

52.222-19 - Child Labor—Cooperation with Authorities and Remedies

52.222-21 - Prohibition of Segregated Facilities

52.222-26 - Equal Opportunity

52.222-36 - Equal Opportunity for Workers with Disabilities

52.222-50 - Combating Trafficking in Persons

52.223-18 - Encouraging Contractor Policies to Ban Text Messaging While

52.225-1 - Buy American—Supplies

52.225-3 - Buy American –Free Trade Agreements – Israeli Trade Act

52.225-13 - Restrictions on Certain Foreign Purchases

52.225-18 - Place of Manufacture

52.232-33 - Payments by Electronic Funds Transfer

The following FAR clauses/provisions are included but not limited to:

52.203-18 - Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or

Statements-Representation.

52.203-19 - Prohibition on Requiring Certain Internal Confidentiality Agreement or Statements.

52.204-7 - System for Award Management

52.204-13 - System for Award Management Maintenance

52.204-16 - Commercial and Government Entity Code Reporting

52.204-17 - Ownership or Control of Offeror

52.204-18 - Commercial and Government Entity Code Maintenance

52.204-19 - Incorporation by Reference of Representations and Certifications

52.204-20 - Predecessor of Offeror

52.209-2 - Prohibition on Contracting with Inverted Domestic Corporations—Representation

52.209-10 - Prohibition on Contracting with Inverted Domestic Corporations

52.209-11 - Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any

Federal Law

52.212-1 - Instructions to Offerors -- Commercial Items

52.219-1 - Small Business Program Representations Alternate I

52.219-13 - Notice of Set-Aside of Orders

52.222-22 - Previous Contracts and Compliance Reports

52.222-25 - Affirmative Action Compliance

52.222-26 - Equal Opportunity

52.223-18 - Encouraging Contractor Policies to Ban Text Messaging While Driving

52.223-22 - Public Disclosure of Greenhouse Gas Emissions and Reduction Goals—Representation

52.225-25 - Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to

Iran—Representation and Certifications

52.229-3 - Federal, State, and Local Taxes

52.232-1 - Payments

52.232-33 - Payment by Electronic Funds Transfer-- System for Award Management

52.232-39 - Unenforceability of Unauthorized Obligations

52.232-40 - Providing Accelerated Payments to Small Business Subcontractors

52.233-3 - Protest After Award

52.233-4 - Applicable Law for Breach of Contract Claim

52.252-1 - Solicitation Provisions incorporated By Reference

52.252-2 - Clauses Incorporated by Reference

52.242-15 – Stop Work Order

52.247-34 - F.o.b. – Destination

52.252-1 - Solicitation Provisions Incorporated by Reference

52.252-2 - Clauses Incorporated by Reference

52.252-5 - Authorized Deviations in Provisions

52.252-6 - Authorized Deviations in Clauses

52.253-1 - Computer Generated Forms

The following DFARS clauses/provisions are included but not limited to:

252.203-7000 - Requirements Relating to Compensation of Former DoD Officials

252.203-7002 - Requirement to Inform Employees of Whistleblower Rights

252.203-7005 - Representation Relating to Compensation of Former DoD Officials

252.204-7003 - Control of Government Personnel Work Product

252.204-7008 - Compliance with Safeguarding Covered Defense Information Controls

252.204-7012 - Safeguarding Covered Defense Information and Cyber Incident Reporting

252.204-7015 - Notice of Authorized Disclosure of Information for Litigation Support

252.209-7998 - Representation Regarding Conviction of a Felony Criminal

252.209-7999 - Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony

Conviction under any Federal Law

252.211-7003 - Item Unique Identification and Valuation

252.223-7008 - Prohibition of Hexavalent Chromium

252.225-7001 - Buy American and Balance of Payments Program

252.225-7002 - Restrictions on food, clothing, fabrics, hand or measuring tools, and flags

252.225-7012 - Preference for Certain Domestic Commodities

252.225-7021 - Trade Agreements

252.225-7048 - Export-Controlled Items

252.232-7003 - Electronic Submission of Payment Requests and Receiving Reports

252.232-7006 - Wide Area Workflow Payment Instructions

252.232-7010 - Levies on Contract Payments

252.243-7001 - Pricing of Contract Modifications

252.244-7000 - Subcontracts for Commercial Items

252.247-7023 - Transportation of Supplies by Sea

The following AFFARS clauses/provisions are included:

5352.201-9101 - Ombudsman

5352.223-9000 - Elimination of Use of Class I Ozone Substances

The following Local clauses are included:

Contract Holidays

Truck Entry Gate, Notice

List of Attachments

Standard Commercial warranties apply. (52.212-4, Addendum – (a),(b))

Quotes must include the response page, attached on the last page of this document.

Contact Information

Quotations are due by: 27 April 2020, by 10:00am Central Standard Time (CST). Contact the following individuals for information regarding this solicitation:

Shane Washburn, Contract Specialist, 405-622-7837

Shane.washburn.5@us.af.mil

Darla DeAngelis, Contracting Officer, 405-736-4104 darla.deangelis@us.af.mil

Attachments:

1. Item Description

2. Drawing(s) 520-11176 mailto:Shane.washburn.5@us.af.mil mailto:darla.deangelis@us.af.mil

RESPONSE PAGE

RETURN THIS PAGE WITH THE COMPLETED INFORMATION AND AUTHORIZED SIGNATURE.

OFFEROR MAY PROVIDE COMPANY QUOTATION SHEET IN CONJUNCTION WITH THIS

RESPONSE PAGE

1. OFFEROR INFORMATION

BUSINESS NAME:

STREET ADDRESS: CITY, STATE, ZIP:

CAGE CODE and DUNS:

BUSINESS WEB ADDRESS:

CONTACT PERSON:

TELEPHONE: FAX:

E-MAIL:

2. SUPPLIES/SERVICES AND PRICES/COSTS

Contractor is required to provide commercial product literature for all items quoted below

CLIN 0001 Unit/EA Price: $_______________________ Total Price for CLIN 0001: $_______________________

Total Proposed Price for all CLINs: $__________

DISCOUNT TERMS:

NET 30 or _______% IN _______ DAYS

DAYS REQUIRED FOR DELIVERY:

3. CERTIFICATION OF RESPONSE

Offeror’s Authorized Representative's Signature: Date:

Type or Print Name: Position or Title:

Contractor is required to sign this document and return 1 copy to issuing office.

Contractor agrees to furnish and deliver all items set forth or otherwise identified above and on any additional sheets subject to the terms and conditions specified herein.

Contractor is required to provide commercial product literature for all items quoted above.