Combined Syn Sol 1333ND25QNB030433 Phased Loop System.docx

Combined Synopsis/Solicitation 1333ND25QNB680485 Phased Locked Loop System THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL PRODUCTS OR COMMERCIAL SERVICES PREPARED IN ACCORDANCE WITH THE FORMAT IN SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL PRODUCTS OR COMMERCIAL SERVICES -AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A SEPARATE WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES FOR CERTAIN COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES UNDER THE AUTHORITY OF FAR 13.

The solicitation number is 1333ND25QNB680485 and is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2025-05 dated August 7, 2025.

1352.215-72 INQUIRIES (APR 2010)

Offerors must submit all questions concerning this solicitation in writing to both the Contract Specialist Elizabeth Timberlake at elizabeth.timberlake@nist.gov and the Contracting Officer Donald Collie at donald.collie@nist.gov. Questions should be received no later than four (4) calendar days after the issuance date of this solicitation. All responses to the questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the responses included in the amendment to the solicitation will govern performance of the contract.

(End of Provision)

The associated North American Industrial Classification System (NAICS) code for this procurement is 334516 – Analytical Laboratory Instrument Manufacturing with a small business size standard of 1,000 employees.

This acquisition is being solicited as a total small business set-aside.

BACKGROUND:

The National Institute of Standards and Technology (NIST), Physical Measurement Laboratory (PML), Quantum Measurement Division (QMD), NIST Mass and Force Group, Small Mass and Force Metrology Project require a multichannel Phase-Locked Loop (PLL) for an inertial balance system to disseminate mass less than 1 milligram. The system will monitor the output of an optomechanical oscillator and actively control the signal sent to the oscillator to maintain resonance while measuring the output frequency.

LIST OF ATTACHMENTS:

The following documents and forms are hereby provided as attachments. The purpose of these attachments is for reference and to provide specification requirements to the Contractor for quotation purposes only.

Attachment #1: Statement of Work Attachment #2: Deviations to FAR 52.212-3 and 52.212-5

All offerors shall provide a firm-fixed-price quotation for the following line item:

PRICE

FAR 52.212-1, INSTRUCTIONS TO OFFERORS – COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

Addendum to FAR 52.212-1, Quotation Preparation Instructions

System for Award Management (SAM) Registration In accordance with FAR 52.204-7, the awardee must be registered in the System for Award Management (www.sam.gov) prior to award. Refusal to register shall forfeit award.

DUE DATE FOR QUOTATIONS

Offerors shall submit their electronic quotations, via email, so that NIST receives them not later than the response due date and time on the SAM.gov notice. E-mail quotations shall be submitted directly to the Elizabeth Timberlake at elizabeth.timberlake@nist.gov and the Contracting Officer Donald Collie at donald.collie@nist.gov

Please reference the RFQ number in the subject line of email communications. Offerors quotations shall not be deemed received by the Government until the quotation is entered in the e-mail inbox set forth above.

Quotations:

All quotations shall conform to solicitation provisions/clauses and be prepared in accordance with this section. The quotation shall be clearly and concisely written as well as be neat, indexed (cross-indexed as appropriate) and logically assembled. Note: The term “indexed” refers to a table of contents that lists sections and page numbers. In the event that the Offeror is unable to create an indexed quotation, an alternative approach such as a Table of Contents shall suffice. All pages of the quotation shall be appropriately numbered.

In preparing the quotation, each volume shall stand on its own. For each given evaluation factor the Government will only evaluate the information provided in the corresponding section of the quotation. The Offeror’s quotation shall be clearly divided into the following distinct volumes:

Volume I – Technical Quotation Volume II – Price Quotation Volume III – Terms and Conditions Incomplete quotations may be considered non-responsive and removed from further consideration.

Volume I - Technical Quotation:

The offeror shall submit an electronic technical quotation, via email. The technical quotation shall address the following:

Minimum Requirements:

The offeror must submit a technical description or product literature for the product it is proposing, which clearly identifies the manufacturer, and clearly demonstrates its proposed product meets or exceeds each minimum requirement described in the Statement of Work (SOW), by providing a citation to the relevant section of its technical description or product literature and if applicable, evidence that the Offeror is authorized by the original product manufacturer to provide the item(s) in the quotation shall be included.

The offeror must not simply state they will meet or exceed the requirement; evidence must be provided.

Volume II - Price Quotation:

The offeror shall submit an electronic copy of the completed price quotation. The price quotation shall be separate from any other portion of the quotation. The offeror shall propose a separate firm-fixed-price, FOB Destination, for each CLIN. Price quotations shall remain valid for a period of 90 days from the date quotations are due. Contractor shall state express warranty coverage (if applicable).

Offerors/quoters that are proposing products manufactured outside of the United States must identify any other or unknown charges that may be applicable to the sale of these products (here indicated as CLIN 0002) as a separate line item on price quotes/proposals. This price element may be listed as part of the cost of the product or as a sub-total element but must be clearly identified. This price element must only apply to the total value of the goods identified for customs processing. Only include the country of origin and the tariff percentage currently in place or the expected amount at time of delivery for that country. Price quotes shall clearly identify the relevant transportation fees in terms of percentage and total cost. If there are multiple countries of origins and associated tariffs, identify each separately.

Volume III – Terms and Conditions

NOTE: System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in agency solicitations. Examples include:

52.223-22, Public Disclosure of Greenhouse Gas Emissions and Reduction Goals—Representation, and 52.212-3, Offeror Representations and Certifications—Commercial Products and Commercial Services - paragraph (d).

Contracting officers shall not consider or use these representations when making award decisions or enforce requirements. Entities are not required to, nor are they able to, update their entity registration to remove these representations in SAM.

Provisions Offerors shall provide a completed copy of all provisions listed below:

1. 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services (MAY 2024) (DEVIATION FEB 2025). The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision.

2. 52.225-2, Buy American Certificate (Oct 2022)

3. 52.225-18, Place Of Manufacture (Aug 2018) Acceptance of Terms and Conditions (Addendum to FAR 52.212-1(b) (11)):

If the contractor objects to any of the terms and conditions contained in this solicitation, the contractor shall state "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:" [Contractor shall list exception(s) and rationale for the exception(s)]. It is the sole responsibility of the contractor to identify in their quotation any exceptions to the terms and conditions of the solicitation. If the contractor does not include such a statement, the submission of a quotation in response to this solicitation will be regarded as the Contractor's acceptance of the Government's terms and conditions for inclusion into the resultant purchase order (PO).

Note: This procurement is not being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If an Offeror submits a quotation based upon an FSS or GWAC contract, the Government will accept the proposed price. However, the terms and conditions stated herein will be included in any resultant purchase order, not the terms and conditions of the Offeror's FSS or GWAC contract, and the statement required above shall be included in the quotation.

(End of provision)

Provision 52.212-2, Evaluation-Commercial Products and Commercial Services applies to this procurement. The evaluation criteria included in paragraph (a) of the provision are as follows:

EVALUATION CRITERIA

The Government intends to award a single purchase order (PO) from this solicitation using simplified acquisitions procedures in accordance with FAR part 13. The Government reserves the right not to award a PO and to make an award without discussions based solely upon initial quotes.

Evaluation Factors Award shall be made to the responsible offeror who: (1) Meets all required technical specifications as determined by a review of documentation submitted in accordance with this solicitation; (2) proposes the lowest price. Award shall be made to the lowest priced, technically acceptable offeror.

An Offeror's failure to address any factor may be considered indicative of the Offeror's lack of understanding of the Government's requirements and may result in the offer being determined unacceptable.

Technical Capability: No prototypes, demonstration models, used or refurbished instruments will be considered. Evaluation of technical capability shall be based on the information provided in the quotation. NIST will evaluate whether the offeror has demonstrated that its proposed equipment meets or exceeds all minimum requirements. Quotations that do not demonstrate the proposed equipment meets all requirements will not be considered further for award. If an offerors technical description and/or product literature does not indicate whether its proposed equipment meets a certain minimum requirement, NIST will determine that it does not meet the requirements.

Price: The proposed price will be evaluated. The evaluation will determine whether the proposed prices are reasonable in relation to the solicitation requirements. Prices must be entirely compatible with the technical portion of the quotation.

(End of provision)

PROVISIONS AND CLAUSES:

The following provisions and clauses apply to this acquisition and are hereby incorporated by reference.

All FAR provisions and clauses may be viewed at https://www.acquisition.gov/browse/index/far All CAR provisions and clauses may be viewed at https://www.acquisition.gov/car

PROVISIONS

FAR 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements – Representation (JAN 2017) FAR 52.204-7 System for Award Management (NOV 2024) FAR 52.204-16 Commercial and Government Entity Code Reporting (AUG 2020) FAR 52.204-17 Ownership or Control of Offeror (AUG 2020) FAR 52.204-20 Predecessor Of Offeror (AUG 2020) FAR 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (NOV 2021) FAR 52.204-26 Covered Telecommunications Equipment or Services – Representation (OCT 2020) FAR 52.204-29 Federal Acquisition Supply Chain Security Act Orders—Representation and Disclosures (DEC 2023) FAR 52.209-2 Prohibition on Contracting With Inverted Domestic Corporations- Representation (NOV 2015) FAR 52.212-1 Instructions to Offerors -- Commercial Items (SEP 2023) FAR 52.212-3 Offeror Representations and Certifications – Commercial Products and Commercial Services (MAY 2024)(DEVIATION FEB 2025) FAR 52.222-22 Previous Contracts and Compliance Reports (FEB 1999) FAR 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran – Representation and Certifications (JUN 2020) FAR 52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998) FAR 52.252-5 Authorized Deviations in Provisions (NOV 2020)

CLAUSES:

FAR 52.204-13 System for Award Management Maintenance (OCT 2018) FAR 52.204-18 Commercial and Government Entity Code Maintenance (AUG 2020) FAR 52.204-19 Incorporation by Reference of Representations and Certifications (DEC 2014) FAR 52.212-4 Contract Terms and Conditions – Commercial Products and Commercial Services (NOV 2023) FAR 52.232-39 Unenforceability Of Unauthorized Obligations (JUN 2013) FAR 52.247-35 F.O.B. Destination, Within Consignee`s Premises (APR 1984) CAR 1352.201-70, Contracting Officer's Authority (APR 2010) CAR 1352.209-73, Compliance with the Laws (APR 2010) CAR 1352.209-74 Organizational Conflict of Interest (APR 2010)

The following FAR PROVISIONS apply to this acquisition and are incorporated by full-text. Additionally, they required to be completed and returned with the solicitation response in Volume III:

FAR 52.225-2 Buy American Certificate (October 2022) (a)(1) The Offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c) of this provision contains a critical component.

(2) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select "no".

(3) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105).

(4) The terms "commercially available off-the-shelf (COTS) item," "critical component," "domestic end product," "end product," and "foreign end product" are defined in the clause of this solicitation entitled "Buy American--Supplies."

(b) Foreign End Products:

[List as necessary]

(c) Domestic end products containing a critical component:

Line Item No. ___ [List as necessary]

(d) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation.

(End Of Provision)

FAR 52.225-18, Place of Manufacture (August 2018)

(a) Definitions. As used in this provision— “Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except—

(1) FPSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

(b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly [ ] (1) In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or [ ] (2) Outside the United States.

(End of provision)

The following FAR, CAR, and NIST LOCAL CLAUSES apply to this acquisition and are incorporated by full-text.

FAR 52.212-5 - Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Products and Commercial Services (JAN 2025) (DEVIATION FEB 2025)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805note).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) (41 U.S.C. 4712) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (31 U.S.C. 6101 note).

52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Nov 2021) (31 U.S.C. 6101 note).

52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

52.219-28, Post Award Small Business Program representation (Feb 2024) (15 U.S.C. 632(a)(2).

52.222-3, Convict Labor (June 2003) (E.O. 11755).

52.222-19, Child Labor-Cooperation with Authorities and Remedies (Feb 2024) (E.O. 13126).

52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O. 13627).

52.225-1, Buy American-Supplies (Oct 2022) (41 U.S.C. chapter 83).

52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) (E.O. 13513).

52.232-33, Payment by Electronic Funds Transfer— System for Award Management (Oct 2018) (31 U.S.C. 3332).

52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Nov 2024) (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1), in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509).

(ii) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) (41 U.S.C. 4712).

(iii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iv) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(v) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(vi) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

(vii) (A) 52.204–30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec 2023) ( Pub. L. 115–390, title II).

(B) Alternate I (Dec 2023) of 52.204–30.

(viii) 52.219-8, Utilization of Small Business Concerns (Jan 2025) ( 15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(xi) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

(xii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

(xiii) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

(xiv) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xv) 52.222-41, Service Contract Labor Standards (Aug 2018) ( 41 U.S.C. chapter 67).

(xvi) (A) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O 13627).

(B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xvii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

(xviii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

(xix) 52.222-54, Employment Eligibility Verification (Jan 2025) ( E.O. 12989).

(xx) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

(xxi) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

(xxii) (A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xxiii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(xxiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxv) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.232-40.

(xxvi) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Nov 2024) (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).

(xxvii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) ( 46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

FAR 52.252-2 Clauses Incorporated by Reference (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this address:

FAR provisions and clauses: https://www.acquisition.gov/browse/index/far CAR provisions and clauses: https://www.acquisition.gov/car

(End of clause)

CAR 1352.233-70 Agency Protests (APR 2010)

(a) An agency protest may be filed with either: (1) the contracting officer, or (2) at a level above the contracting officer, with the appropriate agency Protest Decision Authority. See 64 Fed. Reg. 16,651 (April 6, 1999)

(b) Agency protests filed with the Contracting Officer shall be sent to the following address:

NIST/ACQUISITION MANAGEMENT DIVISION

ATTN: Don Collie, CONTRACTING OFFICER 100 Bureau Drive, MS 1640 Gaithersburg, MD 20899

(c) Agency protests filed with the agency Protest Decision Authority shall be sent to the following address:

ATTN: HEAD OF THE CONTRACTING OFFICE (HCO)

100 Bureau Drive, MS 1640 Gaithersburg, MD 20899

(d) A complete copy of all agency protests, including all attachments, shall be served upon the Contract Law Division of the Office of the General Counsel within one day of filing a protest with either the Contracting Officer or the Protest Decision Authority.

(e) Service upon the Contract Law Division shall be made as follows:

U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue, N.W. Washington, D.C. 20230.

FAX: (202) 482-5858

(End of clause)

CAR 1352.233-71 GAO and Court Of Federal Claims Protests (APR 2010)

(a) A protest may be filed with either the Government Accountability Office (GAO) or the Court of Federal Claims unless an agency protest has been filed.

(b) A complete copy of all GAO or Court of Federal Claims protests, including all attachments, shall be served upon (i) the Contracting Officer, and (ii) the Contract Law Division of the Office of the General Counsel, within one day of filing a protest with either GAO or the Court of Federal Claims.

(c) Service upon the Contract Law Division shall be made as follows:

U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue N.W.

Washington, D.C. 20230.

FAX: (202) 482-5858

(End of clause)

NIST LOCAL-53 Contract Performance During Changes in NIST Operating Status All contractors performing work on active contracts at the U.S. Department of Commerce (DOC), National Institute of Standards and Technology (NIST) campuses and/or working in NIST workspaces should go to the www.nist.gov website and under the "About NIST" tab click on "Visit". This site includes information about campus access and security information; identification requirements; parking information and more.

Contractor personnel are required to check the appropriate campus operating status and personnel requirements at https://www.nist.gov/campus-status daily prior to arriving on site. All personnel must adhere to the requirements set forth in the operating status.

Unless otherwise stated in the contract terms and conditions, normal days of business operation are Monday through Friday, excluding Federal Holidays. However, throughout the contract period of performance, there may be circumstances beyond the control of NIST that will impact normal days of business operation such as inclement weather, power outages, etc. In circumstances such as these, the Contractor must call the appropriate NIST campus status line to verify the operating status:

Gaithersburg Campus Operating Status Line:

(301) 975-8000

(800) 437-4385 x8000 (toll free)

Boulder Campus Operating Status Line:

(303) 497-4000

(303) 497-3000 option 2

During a lapse in appropriation, access to Government facilities and resources, including equipment and systems, will be limited to excepted personnel for both Federal employees and Contractor personnel. If performance of the contract is onsite and/or requires Government interaction, unless you have been, or are notified that you are to work under an excepted status, you will automatically enter a temporary work stoppage. The work stoppage shall remain in effect until the lapse is resolved and notification is provided via the NIST website at https://www.nist.gov/ and/or the NIST operating status lines. Additionally, Contractors are encouraged to monitor public broadcasts or the Office of Personnel Management’s website at www.opm.gov for the Federal Government operating status.

NIST will provide notification to all contractors that are determined to have excepted status. All excepted contractors are required to continue performance and communicate with the appointed Contracting Officer’s Representative (COR) for further guidance, or NIST Contracting Officer if a COR is not appointed.

Contractors with supply or service contracts that are fully funded at the time of contract award and do not require access to Government facilities, resources, or active administration by Government personnel in a manner that would cause the government to incur additional obligations during the lapse in appropriation may continue performance.

Please note that in all circumstances that impact operations on the NIST campuses, contractors are expected to follow all direction and guidance provided by NIST authorities.

(End of clause)

NIST LOCAL-54 Electronic Billing Instructions NIST requires that Invoice/Voucher submissions are sent electronically via email to INVOICE@NIST.GOV.

Each Invoice or Voucher submitted shall include the following:

(1) Contract number;

(2) Contractor name and address;

(3) Unique entity identifier (see www.sam.gov for the designated entity for establishing unique entity identifiers);

(4) Date of invoice;

(5) Invoice number;

(6) Amount of invoice and cumulative amount invoiced to-date;

(7) Contract Line Item Number (CLIN);

(8) Description, quantity, unit of measure, unit price, and extended price of supplies/services delivered;

(9) Prompt payment discount terms, if offered; and

(10) Any other information or documentation required by the contract.

(End of clause)

NIST LOCAL-56 INVOICING PROCESSING PLATFORM-ALTERNATE I (DEC 2022)

Upon written notice from the contracting officer the following supersedes all other instructions for the submission of payment requests. Accordingly, following written notice payment requests must be submitted electronically through the U.S. Department of the Treasury's Invoice Processing Platform System (IPP).

"Payment request" means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable payment request or invoicing instructions, Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is https://www.ipp.gov. Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice:

The Contractor must use the IPP website to register, access, and use IPP for submitting payment requests. If not already enrolled, the Contractor Government Business Point of Contact (as listed in SAM) will receive enrollment instructions via email within three to five business days of the addition of the contract award to IPP. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email: IPPCustomerSupport@fiscal.treasury.gov or phone (866) 973-3131.

If the Contractor is unable to comply with the requirement to use IPP for submitting payment requests, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation. Contact the contracting officer for more information on submitting a waiver request.

(End of clause)

DEVIATIONS to FAR PROVISION 52.212-3 and CLAUSE 52.212-5 52.212-3 Offeror Representations and Certifications—Commercial Products and Commercial Services.

As prescribed in 12.301(b)(2), insert the following provision:

Offeror Representations and Certifications—Commercial Products and Commercial Services (MAY 2024)(DEVIATION FEB 2025)

(d) [Reserved]Representations required to implement provisions of Executive Order 11246—

(1) Previous contracts and compliance. The offeror represents that—

(i) It □ has, □ has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and

(ii) It □ has, □ has not filed all required compliance reports.

(2) Affirmative Action Compliance. The offeror represents that—

(i) It □ has developed and has on file, □ has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or

(ii) It □ has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.

52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services.

As prescribed in 12.301(b)(4), insert the following clause:

Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services (JAN 2025)(DEVIATION FEB 2025)

(b) * * * __(33) [Reserved] 52.222-21, Prohibition of Segregated Facilities (APR 2015).

__(34) [Reserved] (i) 52.222-26, Equal Opportunity (SEPT 2016) (E.O. 11246).

__(ii) Alternate I (FEB 1999) of 52.222-26.

(e)(1) * * *

(ix) [Reserved]52.222-21, Prohibition of Segregated Facilities (APR 2015).

(x) [Reserved]52.222-26, Equal Opportunity (SEP 2016) (E.O. 11246).

Alternate II (JAN 2025)(DEVIATION FEB 2025). * * * (e)(1) * * *

(ii) * * *

(I) [Reserved] 52.222-21, Prohibition of Segregated Facilities (APR 2015).

(J) [Reserved] 52.222-26, Equal Opportunity (SEP 2016) (E.O. 11246).