CNR_150_hp_OBM_requirements__D2.pdf
PDF 2 MB Posted
- Attached to
- CNR FS - D2 150 hp outboard motor
- Solicitation number
- SRC0000026721
- Issued by
- Talladega County, Alabama
About this file
This document contains specifications and requirements for the purchase and installation of a Suzuki DF150A outboard motor for a state agency boat located at the Fish Hatchery Road facility in Eastaboga, AL. The requirements detail a 150hp 4-stroke outboard motor with specific features including EFI fuel induction, power trim and tilt, 25" shaft length, and a 3-star C.A.R.B. rating. The installation package includes two stainless steel 4-blade propellers, new fuel line, control box with cables and wiring, engine switch panel, and a 4" Suzuki tachometer with monitor feature. The installation must be completed within 120 days after PO issuance and includes removal of the existing 150hp Mercury motor.
The installation requires mounting the new motor on the KANN deck boat's transom, reusing the existing Dometic hydraulic steering system, and installing all necessary accessories and controls. The vendor must also handle removal of the current motor and its accessories, placing them in a state vehicle. For suppliers located more than 25 miles from the office, pickup and delivery services must be included unless installation occurs onsite. The document includes several reference photos showing the current motor installation, control box placement, and existing trim extender plates used to reduce porpoising.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| CNR_boat_motor_additional_terms_and_conditions.pdf | ||
| ITB_Standard_Boilerplate_udated_9.25.2024.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Suzuki DF150A Outboard:
Horsepower: 150 hp
Engine type: Outboard 4-stroke
Full Throttle RPM Range: ~5000-6000
Ignition System: Solid State Direct Ignition
Alternator: 12V (44 Amp minimum)
Fuel induction system: EFI
C.A.R.B. rating: 3-star
Starting system: Electric
Trim: Power Trim and Tilt
Shaft length: 25” (X:25)
Weight: 535 pounds maximum
Warranty: 36 month governmental/state agency minimum
Additional Items and Installation:
2 stainless steel 4 blade propellers (~17-18 pitch, current prop is 18p 4 blade)
1 new fuel line from OBM to fuel tank
1 control box with throttle and shift cable and wiring harness mounted to boat
1 engine switch panel (key and safety switch), unless part of the control box
1 Suzuki 4” tachometer with “monitor” feature mounted to boat helm (see photos of current tach. placement and control box bracket).
Mounting:
Installation of new motor on transom, and installation of all applicable accessories, including but not limited to control box, gauges, cables, panels, modules, wires, and steering controls.
Hydraulic Steering (Dometic) on boat will be re-used, (Currently attached to 150 hp Mercury See photos), appropriate plates/brackets etc. if needed should be included in quote for new engine mounting to hydraulic steering.
Remove current motor and controls/gauges/oil reservoir etc.
Vendor will place removed motor that is currently on boat, and its accessories, into the back of state vehicle (pickup truck).
Must be installed within 120 days after PO issued.
If supplier if greater than 25 miles from office include pickup and delivery, unless install occurs onsite.
Notes:
Trim extender/reducer plates are currently installed to reduce porpoising with current engine (see photos) .
o be installed on KANN deck boat with engine setback and jackplate (see photos)
Boat currently housed at 1930 Fish Hatchery Road Eastaboga, AL 36260.
Pictures of Boat and current motor:
File details come from the government source that posted it. Updated .