CNC Router System Specifications.docx

CNC Router System, ShopSabre IS-612 including additional options as described, equal to or better. Maximum size of router: 17' 9" wide x 23 ' deep x 16" high. Pricing is to be inclusive of all charges, fees, shipping, etc. No site visit is required. This will be a one-time purchase to be installed by Draper Furniture Plant located at 2406 Marion Spillway Road, Elmore, Alabama 36025. Installation by location must not void any product warranties.

CNC Router System Specifications General Specifications

· Fully Assembled Precision Milled Over Sized Steel Tube Frame, Over Sized Tube Steel Gantry, Tube Steel Gantry Uprights, Industrial Designed made in USA.

· Cut Area 75-inch x 146-inch x 12-inch Z.

· Limit Switches on X, Y, Z Axis with Auto Squaring and Boundary Alarms.

· Emergency Stop Switch.

· X, Dual Drive Y, and Z Axis Driven with Industrial Precision Anti-Backlash Ball Screw Drives.

· Industrial 25MM Precision Linear Guide Rails & Bearings on All Axis - Y Axis Hidden Design - All Mating Surfaces Machined for Precision.

· Digital A/C Brushless Servo Motors with Amplifiers on X, Dual Y, and Z Axis - Closed Loop with Z Axis Brake - Twin 1 Kilowatt Servos on Y Axis.

· Brand Specific WINCNC Industrial Controller Hardware & Software.

· Computer System - Full Size Desktop System with Solid State Hard Drive

· 8GB Memory,

· 19" Flat Screen Monitor,

· Keyboard and Mouse.

· Rolling Enclosed Steel Fan Cooled Machine Operator Control Stand.

· Tool Measure Switch - Measures Tooling Height without Changing Z Height for Fast Tool Change & Increased Accuracy.

· Quick Release Dust Skirt - 4" Outlet for Connecting to Dust Collector.

· UL/CUL Certified Control Box

Spindle and Auto Tool Changer

· 8KW 10HP HSD Spindle with Auto Tool Changer Package

a. Spindle: Italian Built Industrial Electric 8KW 10HP HSD with ISO30 Package.

b. 24,000 RPM maximum

c. 12 Position Auto Tool Changer with

d. Linear Rack Style Tool Changer Package Includes:

1. 12Qty - ER32 Collets, ISO30 Tool Holders (Cones),

2. Compatible Tool Forks,

3. Precision Mounted Fixed Linear Style Steel Tool Rack on rear of machine frame,

4. Set of collet wrenches, Tool holder vice, Auto Spindle On/Off & Auto Spindle RPM control via G-Code or Manual over-ride,

5. Z Technology with Air Balancer for Z Axis

Tabletop

· Phenolic Tabletop

· Table machined to the frame of the machine for added machine top accuracy

· T-Slot with clamp kit

a. Aluminum T-Slot installed on 8-in centers recessed into table top and clamp kit.

Additional Items:

· Wireless Hand-Held Controller Pendant with Jog Wheel and built in magnets that allow unit to store on frame.

· Wireless Controller must communicate directly with the machine so there is no interference with other controllers.

· Air Blower System for Chip Movement (15 cfm @ 100 psi air required)

· Maintenance Kit Includes Grease (3 Tubes), required needle fitting, and a professional grease gun.

Software

· Vectric Vcarve Pro or Aspire CAD/CAM Software.

· Six month trail of KCD Cabinet Software

Industrial Pop-Up Table Reference Pins

· Industrial Pop-Up Table Reference Pins includes

a. 5 industrial pneumatic pins (3 on Left Side 2 along Front) allowing for quick and effortless sheet alignment or jig /fixture alignment.

b. These industrial pneumatic pins are able to be activated manually by the push of a button on the controller or automated through G-Code.

c. Pre-programs the pins to drop upon spindle start-up to reduce the risk of collision.

Table Vacuum System

· 25-Hp FPZ Vacuum System.

· Four (4) Zone Vacuum Manifold

· Pump Specs: 14" HG, 467 CFM Open Flow

· Vacuum Pump requires 3 Phase 208/230/460 Volt

· Motor Starter for 208V-240V 3Phase Operation

· FPZ Regenerative Blower Exhaust Silencer

Material Height Touch Pad

· Material Height Touch Pad allows independent Z Axis Zero by using a integrated double touch for a calculated Z Zero independent from your tool length calibration.

Engraving Laser Head

· Opt Laser - PLH3D-6W Engraving Laser Head Assembly

· Kit includes the Opt Laser Assembly, Wiring, and Opt quick release mount.

· Laser can be removed when not in use for clearance

a. Software – Vectric Software laser module or equal.

Warranty Information:

· 1 year parts warranty.

· Life-Time Technical Assistance available by Telephone: Email, and On-Line Support.

· Training Included – Access to training & videos, lifetime access

· 2 People to attend Basic Training Course at manufacturer in US.