Chipper specifications.docx
DOCX document 16 KB Posted
- Attached to
- Track Brush Chipper
- Solicitation number
- 70CNR-S2314
- Issued by
- Nevada
About this file
The document provided appears to be a set of specifications for an Intimidator 15XPC Track (15" drum style) hand-fed chipper (or equivalent) to be supplied under a formal bid request from the Nevada Division of Forestry. The chipper is required to come with a variety of standard equipment, including a 134 horsepower Kohler diesel engine, a 2-speed rubber track undercarriage, a remote-controlled feed system, and other features. The bid request involves the jurisdictions of Carson City, Nevada.
The specifications outline the technical requirements for the chipper, including dimensions, capacities, and components. Additional options, such as a lockable aluminum toolbox, are also listed. Pricing terms, set-asides, and funding details are not provided in the document. The document does not indicate the quantities required, response deadlines, award dates, or contract terms.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Quote Instructions.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
INTIMIDATOR 15XPC TRACK (15” DRUM STYLE) HAND-FED CHIPPER (OR EQUIVALENT)
To come with the following standard equipment:
· 4” x 6 ½” inspection window on belt shield
· 24” diameter x 18 ¾” wide chipper drum with (4) 5/8” x 5 ½” x 9” dual edge knives
· “Drum Shear Bar” spans full width of the drum mounted in the upper portion of the drum housing potentially creating a slicing action of a winch line or climber’s rope
· 50 gallon steel fuel tank with magnetic drain plug, lockable filler caps, and aluminum sight gauge
· 50 gallon steel hydraulic tank with magnetic drain plug, lockable filler cap, and aluminum sight gauge
· Gate valve for hydraulic tank
· Slide box feed system (includes adjustable spring on each side) with (2) horizonal feed wheels 10 5/8” diameter x 18 ¾” wide, driven by (2) 32.3 CID hydraulic motors.
· Hydraulic lift cylinder – utilizes a hydraulic cylinder to raise or provide down pressure for the top feed wheel (controlled via radio remote control)
· Bottom feed wheel clean out door (opens via spring latch pin allowing dirt and debris to fall out extending knife and component life)
· Hydraulic controlled swivel discharge with adjustable end chip deflector
· Clean out and inspection door on discharge bottom
· 29” high x 54” wide tapered infeed hopper with 30” fold down infeed hopper tray, heavy-duty taillight covers and spring lift assists
· (2) Last chance safety pull cables
· Round control bar – located around top and sides of infeed hopper with 3 control positions (forward/stop/reverse)
· Wooden pusher tool with mount on infeed hopper
· Pressure check kit – Gauge is NOT included
· Radio remote control with tether back-up (controls following functions: track forward/reverse, track left/right, discharge swivel left/right (n/a on stationary discharge), discharge deflector up/down, yoke up/down, feed forward/reverse, throttle, engine e-stop, and hydraulic winch if applicable.
· Stand alone hydraulic oil cooler
· Weather resistant manual container
· Engine disable plug for hood locking pin-preventing engine from operating without pin in place
· (1) weatherproof machine manual (includes safety, operation and parts sections) also (1) engine and clutch manual is included if applicable
· Spanish and English combination safety decals
· Gate valve for hydraulic tank
PAINT
· Standard Imron Industrial Urethane Green
ENGINE
· Kohler KFI34SE300, 134 horsepower diesel engine with NACD spring loaded clutch (includes 3 year/2,000 hour engine warranty) – Tier 4 FINAL
CONTROL SYSTEM AND ENGINE INSTALLATION
· Murphy PV380 panel with reversing auto feed for Kohler 134 horsepower diesel engines (includes 1,000 CCA battery with box) – TRACK UNITS ONLY
CLUTCH
· Clutch is included with engine/motor
TRACK
· Track One 2-speed 303CR rubber track undercarriage
INFEED
· Dinamic winch with line docking station and feed assist controlled via remote (Includes 5/16” diameter x 200’ Teufelberger rope with 12” loop installed)
ADD-ON OPTIONS
· Lockable aluminum tool box
File details come from the government source that posted it. Updated .