CDRLs (dated 13 Jan 2026).pdf
PDF 750 KB Posted
- Attached to
- Minuteman III ICBM, Cable Assembly Federal contract opportunity
- Solicitation number
- FA820626Q0256
About this file
This document is a Contract Data Requirements List (DD Form 1423) for contract FD20202600256 pertaining to Cable Assembly, Facility Power, W1, prepared for the 414 SCMS (Supply Chain Management System) at the U.S. Air Force.
The CDRL contains two data item requirements. The first item (A002) is a Counterfeit Prevention Plan (CPP) that must be delivered no later than 60 calendar days after contract award, with government review and comments provided within 15 calendar days, and a final submission required within 15 calendar days of receiving government comments. The contractor may request a waiver if proof of purchase of the servo driver from the OEM is provided. The second item (A001) is a Test/Inspection Report—specifically a First Article Inspection Report—that must be submitted in draft form no later than 15 calendar days following first article inspection completion, with the government having 30 calendar days to review and provide comments, and final submission required within 30 calendar days of receiving comments. Both deliverables are classified as Distribution Statement D (Department of Defense and U.S. DoD contractors only) and contain export-controlled technical data. The CPP shall be submitted via email to Alfredo Armendáriz and Eric Ellington at 414 SCMS, while the First Article Inspection Report must be submitted electronically through Wide Area Work Flow (WAWF) during the invoice process with notification to the same personnel and the SCMS buycontracts email address. Both data items carry zero estimated cost and are marked as non-standard pricing (NSP).
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Transportation (dated 13 Jan 2026).pdf | ||
| FA820626Q0256.pdf | ||
| Packaging (dated 13 Jan 2026).pdf | ||
| First Article Requirement (dated 13 Jan 2026).pdf | ||
| Packaging SOW (dated 13 Jan 2026).pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PREVIOUS EDITION MAY BE USED.
DD FORM 1423, FEB 2024 Page 1 of 2
CUI
CUI Controlled by: [Name of Office] CUI Category: (List category or categories of CUI) Distribution/Dissemination Control:
POC: [Phone or email address]
CONTRACT DATA REQUIREMENTS LIST
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP TM OTHER
D. SYSTEM/ITEM
Cable Assembly, Facility Power, W1
E. CONTRACT/PR NO.
FD20202600256
F. CONTRACTOR
1. DATA ITEM NO.
A002
2. TITLE OF DATA ITEM
Counterfeit Prevention Plan (CPP)
3. SUBTITLE
4. AUTHORITY (Data Acquisition Document No.)
DI-MISC-81832
5. CONTRACT REFERENCE 6. REQUIRING OFFICE
414 SCMS/GUEA
7. DD 250 REQ
LT
8. APP CODE
A
9. DIST STATEMENT
REQUIRED
D
10. FREQUENCY
ONE/R
11. AS OF DATE
N/A
12. DATE OF FIRST SUBMISSION
Block 16
13. DATE OF SUBSEQUENT
SUBMISSION
Block 16
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES
Draft Final
Reg Repro
16. REMARKS
Changes to addressees, when necessary, shall be made by letter through the CO/ACO without further revision to this CDRL.
Contractor may submit a request for a waiver of the CPP deliverable through the CO/ACO. Waiver must include proof of purchase of servo driver from OEM.
BLOCK 9: Data submittal shall be marked with the following on the cover page:
Report shall be marked with the following statement on the cover page:
DISTRIBUTION STATEMENT D: Distribution authorized to Department of Defense and U.S. DoD contractors only, Administrative or Operational Use & Export Controlled:
09-Feb-2023. Other requests for this document shall be referred to AFNWC/NMSM.
WARNING: This document contains technical data whose export is restricted by Federal Law. Dissemination of this document is controlled under DoD Directive 5230.25.
DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.
BLOCKS 10-13:
The contractor shall deliver the CPP NLT 60 calendar days after contract award. The government shall have 15 calendar days to review and provide comments. The contractor shall deliver the final copy NLT 15 calendar days following the receipt of government comments.
BLOCK 14: Document submission shall be delivered in PDF format via email. Email submission shall be made to:
Alfredo Armendáriz - Mechanical Engineer, 414 SCMS - alfredo.armendariz.1@us.af.mil Eric Ellington - Logistics Management Specialist, 414 SCMS - eric.ellington.2@us.af.mil
Block 16 1 1
15.TOTAL 1 1
17. PRICE GROUP
NSP
18. ESTIMATED
TOTAL PRICE
0.00
G. PREPARED BY
Alfredo Armendáriz
H. SIGNED ON 20251217 I. APPROVED BY J. SIGNATURE
ARMENDARIZ.AL
FREDO.1537550470
Digitally signed by
ARMENDARIZ.ALFREDO.15375504
Date: 2025.12.17 15:00:07 -07'00'
A
PREVIOUS EDITION MAY BE USED.
DD FORM 1423, FEB 2024 Page 1 of 2
CUI
CUI Controlled by: MMIII Program Office CUI Category: Distribution D Distribution/Dissemination Control: Disseminate in accordan POC: Caleb Gatrell (801.586.3691)
CONTRACT DATA REQUIREMENTS LIST
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY:
TDP TM OTHER X-NDTI
D. SYSTEM/ITEM
Cable Assembly, Facility Power, W1
E. CONTRACT/PR NO.
FD20202600256
F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE OF DATA ITEM
TEST/INSPECTION REPORT
3. SUBTITLE
FIRST ARTICLE INSPECTION REPORT
4. AUTHORITY (Data Acquisition Document No.)
DI-NDTI-80809
5. CONTRACT REFERENCE 6. REQUIRING OFFICE
414 SCMS/GUEAB
7. DD 250 REQ
LT
8. APP CODE
A
9. DIST STATEMENT
REQUIRED
D See Block 16
10. FREQUENCY
See Block 16
11. AS OF DATE
See Block 16
12. DATE OF FIRST SUBMISSION
See Block 16
13. DATE OF SUBSEQUENT
SUBMISSION
See Block 16
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES
Draft Final
Reg Repro
16. REMARKS
Block 4:
1)The contractor shall produce a report on the subject item with all dimensions and tolerances specified on the manufacturing data listed in one column and the actual corresponding reading obtained from the inspection of the part listed in another column.
2)Materials utilized in the manufacture of "First Article" items shall be identified and certified along with a copy of material purchase requests as confirming to applicable data requirements.
3) Material processing, including finish requirements (plating, casting, forging, heat treatment, welding, inspection, anodize, painting, etc.) utilized in the manufacture of "First Article" items shall be identified and certified along with a copy of material purchase requirements.
Block 9:
Data submittal shall be marked with the following on the cover page:
DISTRIBUTION STATEMENT D: Distribution authorized to Department of Defense and U.S. DoD contractors only for Controlled Technical Information & Export Controlled: Determined XX/XX/XXXX (insert date). Other requests for this document must be referred to Minuteman III Program Office, Hill
AFB, UT. 84056.
WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 Of Title 22, United States Code) or the Export Control Reform Act Of 2018 (Chapter 58 Sections 4801-4852 Of Title 50, United States Code). Violations of these export-control laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD directive 5230.25 and DoD instruction 2040.02.
DESTRUCTION: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.
Blocks 10, 11, 12, & 13:
Contractor shall submit initial draft of First Article Inspection report no later than (NLT) 15 calendar days following completion of first article inspection. The government will have 30 calendar days to provide comments on the draft inspection report. Final submittal shall be delivered NLT 30 calendar days following receipt of government comments.
Block 14: Submit electronically in Wide Area Work Flow (WAWF). Upload as an attachment during the invoice process.
Provide notification of delivery to:
414scms.gumc.buycontracts@us.af.mil eric.ellington.2@us.af.mil alfredo.armendariz.1@us.af.mil
See Block 16 1
15.TOTAL 1
17. PRICE GROUP
NSP
18. ESTIMATED
TOTAL PRICE
0.00
G. PREPARED BY
Alfredo Armendáriz
H. SIGNED ON 20251217 I. APPROVED BY J. SIGNATURE
ARMENDARIZ.AL
FREDO.1537550470
Digitally signed by
ARMENDARIZ.ALFREDO.15375504
Date: 2025.12.17 12:44:17 -07'00'
| CDRL CPP |
| CDRL FA |
File details come from the government source that posted it. Updated .