CDRL A001-Calibration Certification.pdf

PDF 246 KB Posted

Attached to
Calibration Support Equipment/Components Federal contract opportunity
Solicitation number
N68335-25-P-0197
Issued by
Department of the Navy Naval Air Systems Command Naval Air Warfare Center

About this file

This document is a Contract Data Requirements List (CDRL) for Calibration Certification, associated with Contract Number N68335-25-P-0197 awarded to Technical Communities, Inc. The CDRL specifies a requirement for a Calibration Certification data item for the Keysight Replenishment system, to be delivered to the Naval Air Warfare Center (NAWCAD) Metrology and Calibration Office. The document outlines specific submission requirements, including delivery of a Certificate of Conformance in the contractor's standard format, with electronic submission preferred in MS-Excel, MS-Word, or CD-ROM. Distribution will be made to multiple NAWCAD locations, including addresses in Lakehurst, NJ and Patuxent River, MD, with one final and zero draft copies required.

The CDRL is categorized as a QCIC (Quality Control Inspection Certification) item, with a slow frequency of submission "As Generated" and no specific subsequent submission dates. The contract references DI-QCIC-80798C and SOW paragraph 5.3.2 for guidance. The document is prepared by personnel from Technical Communities, Inc. and approved on 1/27/25, with an estimated total price marked as NSP (Not Separately Priced). The underlying federal contract is for specialized calibration support equipment from Keysight, which was determined to be the only equipment capable of meeting the Navy's precise calibration requirements.

View the file

Other files for this federal contract opportunity

Other files attached to Calibration Support Equipment/Components, newest first.
File Type Posted
CDRL T001-COTS Manual and Associated Supplements Data.pdf PDF
Statement of Work 25-P-0197.docx DOCX document
N68335-25-P-0197_fully executed.docx DOCX document

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DD FORM 1423-1, FEB 2001

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

16. REMARKS (Continued)

DD FORM 1423-1, FEB 2001 Page of Pages

INSTRUCTIONS FOR COMPLETING DD FORM 1423

(See DoD 5010.12-M for detailed instructions.)

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package;

TM - Technical Manual; Other - other category of data, such as "Provisioning,""Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Signature of preparer of CDRL.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref. DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15.

Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14.; Desired medium for delivery of the data item.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government's right to use the data shall be governed by the pertinent provisions of the contract.

DD FORM 1423-1 (BACK), FEB 2001

1_DATA_ITEM_NO: A001
2_TITLE_OF_DATA_ITEM: CALIBRATION CERTIFICATION
3_SUBTITLE: N/A
4_AUTHORITY_Data_Acquisit: DI-QCIC-80798C
5_CONTRACT_REFERENCE: SOW PARA: 5.3.2
6_REQUIRING_OFFICE: NAWCAD BL31400
7_DID_250_REQ: LT
8_APP_CODE: N/A
DIST_STATEMENT: A
10_FREQUENCY: As Generated
11_AS_OF_DATE: N/A
12_DATE_OF_FIRST_SUBMISSI: See Block 16
13_DATE_OF_SUBSEQUENT_SUB: N/A
addressee1: NAWCAD BL31400
draft1: 0
reg1: 1
repro1: 0
addressee2: Heather Loprano
draft2:
reg2:
repro2:
addressee3:
draft3:
reg3:
repro3:
addressee4: NAWCAD BL14200
draft4: 0
reg4: 1
repro4: 0
addressee5: Corry Barnhouse
draft5:
reg5:
repro5:
addressee6:
draft6:
reg6:
repro6:
addressee7: NAWCAD BL31400
draft7: 0
reg7: 1
repro7: 0
addressee8: Phillip Brown
draft8:
reg8:
repro8:
addressee9:
draft9:
reg9:
repro9:
addressee10: Copies w/ each unit
draft10: 0
reg10: 1
repro10: 0
addressee11:
draft11:
reg11:
repro11:
addressee12:
draft12:
reg12:
repro12:
addressee13:
draft13:
reg13:
repro13:
addressee14:
draft14:
reg14:
repro14:
addressee15:
draft15:
reg15:
repro15:
addressee16:
draft16:
reg16:
repro16:
addressee17:
draft17:
reg17:
repro17:
addressee18:
draft18:
reg18:
repro18:
addressee19:
draft19:
reg19:
repro19:
addressee20:
draft20:
reg20:
repro20:
addressee21:
draft21:
reg21:
repro21:
addressee22:
draft22:
reg22:
repro22:
addressee23:
draft23:
reg23:
repro23:
addressee24:
draft24:
reg24:
repro24:
addressee25:
draft25:
reg25:
repro25:
addressee26:
draft26:
reg26:
repro26:
addressee27:
draft27:
reg27:
repro27:
addressee28:
draft28:
reg28:
repro28:
addressee29:
draft29:
reg29:
repro29:
addressee30:
draft30:
reg30:
repro30:
addressee31:
draft31:
reg31:
repro31:
addressee32:
draft32:
reg32:
repro32:
addressee33:
draft33:
reg33:
repro33:
addressee34:
draft34:
reg34:
repro34:
addressee35:
draft35:
reg35:
repro35:
addressee36:
draft36:
reg36:
repro36:
addressee37:
draft37:
reg37:
repro37:
addressee38:
draft38:
reg38x:
repro38:
total_draft: 0
total_repro: 0
16_REMARKS: Block 4/5: DI-QCIC-80798C and SOW paragraph 5.3.2 shall be used as guidance and are provided for reference. Information items in DI-QCIC-80798C that are not relevant to the procured unit do not need to be included in format.

Block 9: DISTRIBUTION Statement "A" will be added in accordance with DoD Directive 5230.24. Distribution Statement A. Approved for public release: distribution unlimited. (31 Oct. 2023). Other requests for this document shall be referred to NAWCAD Metrology and Calibration Office, ATTN: Calibration Standards Manager, NAWCAD, NAS Patuxent River, MD 20670-1118.

Block 10: Contractor shall provide the Certificate of Conformance with each system delivered.

Block 14: Submission in contractor format is acceptable. Electronic format is preferred if in a widely available commercial document format such as MS-Excel or MS Word. Electronic submission of data is also accepted on CD-ROM. Quantity and copies shall be provided in accordance with (IAW) CDRL distribution (Block 14). Addressee's POC information provided on CDRL supplemental page 2.

Block 16: A Certificate of Conformance is acceptable in the contractor's standard format.

17_PRICE_GROUP: NSP
ESTIMATED_TOTAL_PRICE:
G_PREPARED_BY:
1_APPROVED_BY:
Page: 1
reg38t: 4
A_CONTRACT_LINE_ITEM_NO: CLIN 0001-CLIN 0010
B_EXHIBIT: A
TDP:
TM:
OTHER: QCIC
DSYSTEMITEM: Keysight Replenishment
E_CONTRACTPR_NO: N68335-25-P-0197
FCONTRACTOR: Technical Communities, Inc.
16_REMARKS_Continued: Box 14a Addressees:

Heather M. Loprano, heather.loprano@navy.mil NAVAIR Metrology and Calibration

NAWCAD BL31400

JB MDL

Highway 547, Building 120-3, Rm. 269 Lakehurst, NJ 08733

Phillip Brown, Phillip.b.brown38.civ@us.navy.mil

NAWCAD BL31400

JB MDL

Highway 547, Building 120-3, Rm. 269 Lakehurst, NJ 08733

Corry Barnhouse, corry.barnhouse@navy.mil

NAVAIR METCAL AA14200

Bldg 1403 22113 Fortin Circle, Unit 7 Patuxent River, MD 20670

Page2: 2
of_pages: 2
Reset:
2025-01-27T12:47:23-0500
BROWN.PHILLIP.B.JR.1595615034
2025-01-27T11:59:09-0800
FAREED.AUNDRIA.ANN.1164662957
Date3_af_date: 1/27/25
Date4_af_date: 1/27/25

File details come from the government source that posted it. Updated .