CDRL 1.PDF
PDF 134 KB Posted
- Attached to
- Temperature Humidity Chamber Repair Service
- Solicitation number
- N00174-26-SIMACQ-W34-0008
About this file
This is a DD Form 1423 (Contract Data Requirements List) establishing data delivery requirements for a Humidity Chamber Repair Service contract with C-TECK. The contract line item number, contract number, and estimated total price are all marked as "To Be Determined" (TBD).
The single required data deliverable is Data Item A001, titled "Management Plan" with the subtitle "Maintenance and Repair Report," referenced from the Statement of Work section 4.0. This item is categorized under "Other Management" and must comply with the Data Acquisition Document DI-MGMT-80004A. The contractor's format is acceptable provided the report is viewable by the government. The report shall be submitted as requested and approved upon government request and concurrence, with no specified date of first submission or subsequent submissions. All unclassified data must be delivered to the Project Manager, Mr. Walther Hubbard (walter.j.hubbard.civ@us.navy.mil, 301-744-5155), via email in PDF format. Distribution is restricted to Distribution Statement D, authorized only to the Department of War and U.S. Department of War contractors as critical technology; other requests must be referred to the Contracting Officer and Project Manager. The form was prepared by Mr. Walter Hubbard on June 4, 2026, and approved by Mr. Jose H. Ramirez. The requiring office is NSWCIHD - EODTECHCEN (Naval Surface Warfare Center Indian Head Explosives Ordnance Disposal Technology Center).
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - N0017426Q1053.pdf | ||
| VPP.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PREVIOUS EDITION MAY BE USED.
DD FORM 1423, FEB 2024 Page 1 of 2
UNCLASSIFIED
UNCLASSIFIED
Show Attachment Bar
CONTRACT DATA REQUIREMENTS LIST
A. CONTRACT LINE ITEM NO.
TBD
B. EXHIBIT
A
C. CATEGORY:
TDP TM OTHER MGMT
D. SYSTEM/ITEM
Humidity Chamber Repair Service
E. CONTRACT/PR NO.
TBD
F. CONTRACTOR
C-TECK
1. DATA ITEM NO.
A001
2. TITLE OF DATA ITEM
MANAGEMENT PLAN
3. SUBTITLE
Maintenance and Repair Report
4. AUTHORITY (Data Acquisition Document No.)
DI-MGMT-80004A
5. CONTRACT REFERENCE
SOW, 4.0
6. REQUIRING OFFICE
NSWCIHD - EODTECHCEN
7. DD 250 REQ
LT
8. APP CODE
N/A
9. DIST STATEMENT
REQUIRED
D (SEE BLK 9)
10. FREQUENCY
ASREQ
11. AS OF DATE
N/A
12. DATE OF FIRST SUBMISSION
ASREQ
13. DATE OF SUBSEQUENT
SUBMISSION
N/A
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES
Draft Final
Reg Repro
16. REMARKS
BLOCK 4: CONTRACTOR'S FORMAT IS ACCEPTABLE.
REPORT MUST BE VIEWABLE BY THE GOVERNMENT
BLOCK 9: DISTRIBUTION STATEMENT D: DISTRIBUTION
AUTHORIZED TO THE DEPARTMENT OF WAR AND U.S.
DOW CONTRACTORS ONLY; CRITICAL TECHNOLOGY.
OTHER REQUESTS FOR THIS DOCUMENT SHALL BE
REFERRED TO THE CONTRACTING OFFICER AND
PROJECT MANAGER.
BLOCK 12/13: REPORT SHALL BE SUBMITTED AND
DATE APPROVED UPON REQUEST AND
CONCURRENCE OF THE GOVERNMENT.
BLOCK 14: MEDIA REQUIREMENT: ALL UNCLASSIFIED
DATA SHALL BE FORWARDED TO THE PROJECT
MANAGER VIA EMAIL IN PDF FORMAT
PROJECT MANAGER POC:
MR Walther Hubbard Project Manager | Electrical Engineer Energetics Eng & Rem Branch, W34
NSWC IHD
Office: 301-744-5155 walter.j.hubbard.civ@us.navy.mil add continuation
NSWC - Project Mngr 1
15.TOTAL 1
17. PRICE GROUP
18. ESTIMATED
TOTAL PRICE
G. PREPARED BY
Mr. Walter Hubbard
H. SIGNED ON 20260604 I. APPROVED BY
Mr. Jose H. Ramirez
J. SIGNATURE + -
INSTRUCTIONS FOR COMPLETING DD FORM 1423
(See DoDM 5010.12 for detailed instructions.)
DD FORM 1423, FEB 2024 Page 2 of 2
FOR GOVERNMENT PERSONNEL
Item A. Self-explanatory.
Item B. Self-explanatory.
Item C. Mark (X) appropriate category: TDP - Technical Data Package; TM - Technical Manual; Other - other category of data, such as "Provisioning," "Configuration Management," etc.
Item D. Enter name of system/item being acquired that data will support (e.g., Mission Design Series (MDS) designator).
Item E. Self-explanatory (to be filled in after contract award).
Item F. Self-explanatory (to be filled in after contract award).
Item G. Name of preparer of CDRL.
Item H. Date CDRL was prepared and signature of preparer of CDRL.
Item I. Name of CDRL approval authority.
Item J. Date CDRL was approved and signature of CDRL approval authority.
Item 1. See DFARS Subpart 204.71 for proper numbering. To add or delete additional data items, point and click the plus or minus sign to the right of Block J.
Item 2. Enter title as it appears on data acquisition document cited in Item 4.
Item 3. Enter subtitle of data item for further definition of data item (optional entry).
Item 4. Identify only one Data Acquisition Document No. If a single work task generates more than one deliverable data product, prepare a separate data item for each deliverable data product.
Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work/Performance Work Statement paragraph number).
Item 6. Enter technical office responsible for ensuring adequacy of the data item.
Item 7. Specify requirement for inspection/acceptance of the data item by the Government.
Item 8. Specify requirement for approval of a draft before preparation of the final data item.
Item 9. For technical data and computer software, specify the contractor's requirement to mark the appropriate distribution statement on the technical data or computer software (ref. DoDI 5230.24).
Item 10. Specify number of times data items are to be delivered.
Item 11. Specify as-of date of data item, when applicable.
Item 12. Specify when first submittal is required.
Item 13. Specify when subsequent submittals are required, when applicable.
Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.
Item 15. Enter total number of draft/final copies to be delivered.
Item 16. Use for additional/clarifying information for Items 1 through 15.
Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14; Desired medium for delivery of the data item.
Identify for which data item additional remarks are provided. When tailoring the Data Acquisition Document invoked in Item 4, identify which portions of that Document are being tailored.
Identify any referenced attachments to the form. Attachments can be added using the button at the bottom of page 1.
FOR THE CONTRACTOR
Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.
a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.
Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.
b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.
Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.
c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.
Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.
d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.
Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.
Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.
These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government’s rights to use the data shall be governed by the pertinent provisions of the contract.
PREVIOUS EDITION MAY BE USED.
DD FORM 1423, FEB 2024
Page of
INSTRUCTIONS FOR COMPLETING DD FORM 1423
(See DoDM 5010.12 for detailed instructions.)
DD FORM 1423, FEB 2024
Page of
CONTRACT DATA REQUIREMENTS LIST
C. CATEGORY:
14. DISTRIBUTION
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES Draft Final Reg Repro
16. REMARKS
14. DISTRIBUTION
15.TOTAL
Image of arrow pointing towards totals
FOR GOVERNMENT PERSONNEL
Item A. Self-explanatory.
Item B. Self-explanatory.
Item C. Mark (X) appropriate category: TDP - Technical Data Package; TM - Technical Manual; Other - other category of data, such as "Provisioning," "Configuration Management," etc.
Item D. Enter name of system/item being acquired that data will support (e.g., Mission Design Series (MDS) designator).
Item E. Self-explanatory (to be filled in after contract award).
Item F. Self-explanatory (to be filled in after contract award).
Item G. Name of preparer of CDRL.
Item H. Date CDRL was prepared and signature of preparer of CDRL.
Item I. Name of CDRL approval authority.
Item J. Date CDRL was approved and signature of CDRL approval authority.
Item 1. See DFARS Subpart 204.71 for proper numbering. To add or delete additional data items, point and click the plus or minus sign to the right of Block J.
Item 2. Enter title as it appears on data acquisition document cited in Item 4.
Item 3. Enter subtitle of data item for further definition of data item (optional entry).
Item 4. Identify only one Data Acquisition Document No. If a single work task generates more than one deliverable data product, prepare a separate data item for each deliverable data product.
Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work/Performance Work Statement paragraph number).
Item 6. Enter technical office responsible for ensuring adequacy of the data item.
Item 7. Specify requirement for inspection/acceptance of the data item by the Government.
Item 8. Specify requirement for approval of a draft before preparation of the final data item.
Item 9. For technical data and computer software, specify the contractor's requirement to mark the appropriate distribution statement on the technical data or computer software (ref. DoDI 5230.24).
Item 10. Specify number of times data items are to be delivered.
Item 11. Specify as-of date of data item, when applicable.
Item 12. Specify when first submittal is required.
Item 13. Specify when subsequent submittals are required, when applicable.
Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.
Item 15. Enter total number of draft/final copies to be delivered.
Item 16. Use for additional/clarifying information for Items 1 through 15. Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14; Desired medium for delivery of the data item.
Identify for which data item additional remarks are provided. When tailoring the Data Acquisition Document invoked in Item 4, identify which portions of that Document are being tailored.
Identify any referenced attachments to the form. Attachments can be added using the button at the bottom of page 1.
FOR THE CONTRACTOR
Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.
a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.
Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.
b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.
Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.
c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.
Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.
d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.
Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.
Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.
These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government’s rights to use the data shall be governed by the pertinent provisions of the contract.
9.0.0.2.20120627.2.874785 DD Form 1423, "Contract Data Requirements List"
| CurrentPage: |
| PageCount: |
| Select Classification from drop-down list.: 1 |
| CUI Indicator Information: |
| Click on this button to attach a file(s).: |
| A. CONTRACT LINE ITEM NUMBER: TBD |
| exhibit: A |
| C. CATEGORY: Select for "TDP.": 0 |
| C. CATEGORY: Select for "TM.": 0 |
| C. CATEGORY: Select for "OTHER.": 1 |
| C. CATEGORY: Enter specification for "Other.": MGMT |
| System: Humidity Chamber Repair Service |
| ContractNum: TBD |
| Contractor: C-TECK |
| 1. DATA ITEM NUMBER: A001 |
| titleDataItem: MANAGEMENT PLAN |
| subtitle: Maintenance and Repair Report |
| 4. AUTHORITY (Data Acquisition Document Number): DI-MGMT-80004A |
| contractRef: SOW, 4.0 |
| reqOffice: NSWCIHD - EODTECHCEN |
| 7. DD 250 REQUIREMENT: LT |
| 8. APPROVAL CODE : N/A |
| 9. DISTRIBUTION STATEMENT REQUIRED: D (SEE BLK 9) |
| freq: ASREQ |
| asOfDate: N/A |
| dateFirstSub: ASREQ |
| dateSubseqSub: N/A |
| 16. REMARKS: BLOCK 4: CONTRACTOR'S FORMAT IS ACCEPTABLE. |
REPORT MUST BE VIEWABLE BY THE GOVERNMENT
BLOCK 9: DISTRIBUTION STATEMENT D: DISTRIBUTION
AUTHORIZED TO THE DEPARTMENT OF WAR AND U.S.
DOW CONTRACTORS ONLY; CRITICAL TECHNOLOGY.
OTHER REQUESTS FOR THIS DOCUMENT SHALL BE
REFERRED TO THE CONTRACTING OFFICER AND
PROJECT MANAGER.
BLOCK 12/13: REPORT SHALL BE SUBMITTED AND
DATE APPROVED UPON REQUEST AND
CONCURRENCE OF THE GOVERNMENT.
BLOCK 14: MEDIA REQUIREMENT: ALL UNCLASSIFIED
DATA SHALL BE FORWARDED TO THE PROJECT
MANAGER VIA EMAIL IN PDF FORMAT
PROJECT MANAGER POC:
MR Walther Hubbard Project Manager | Electrical Engineer Energetics Eng & Rem Branch, W34
NSWC IHD
Office: 301-744-5155 walter.j.hubbard.civ@us.navy.mil
| Click to add continuation field for Remarks: |
| 14. DISTRIBUTION - a. ADDRESSEE, new line: NSWC - Project Mngr |
| 15.TOTAL - Total draft copies is automatically calculated.: |
| 15.TOTAL - Total final regular copies is automatically calculated.: 1 |
| 15.TOTAL - Total final regular copies is automatically calculated.: 1 |
| 15.TOTAL - Total final reproducible copies is automatically calculated.: |
| priceGrp: |
| estTotalPrice: |
| remarks: |
| preparedBy: Mr. Walter Hubbard |
| J. SIGNATURE: H. SIGNED ON 20260604 |
| J. SIGNATURE: J. SIGNATURE |
| J. SIGNATURE: |
| approvedBy: Mr. Jose H. Ramirez |
| Click to add additional data items.: |
| Click to delete additional data items.: |
File details come from the government source that posted it. Updated .