C8.3 3275-VL03 ODS.doc
DOC document 38 KB Posted
- Attached to
- Hose Assemblies
- Solicitation number
- N4523A-24-Q-4002
About this file
This ordering data sheet specifies requirements for two hose assemblies to be procured through solicitation N4523A-24-Q-4002 issued by the Department of the Navy Naval Supply Systems Command. The hose assemblies must each be 1/2 inch inside diameter, have an overall length of 1500 inches with a tolerance of +/- 2 percent, and have a maximum working pressure of 2000 PSI and burst pressure of 8000 PSI. Additional requirements include a maximum fluid temperature of 450 degrees Fahrenheit, minimum bend radius of 3 inches, and vacuum service rating of 28 inches of mercury. The hose assemblies must have a smoothbore PTFE liner covered by a white ST-FLEX silicone outer jacket with a single 304 stainless steel wire braid and 316 stainless steel JIC ends. Certificates of compliance will be required.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 3275VL01 DID_DI-NDTI-80809B - Tailored.pdf | ||
| C8.2 3275-VL02 ODS.doc | DOC document | |
| 3275VL01 CDRL - A003 Bid Proposal Approval.pdf | ||
| 3275VL01 Hose SOW.docx | DOCX document | |
| C8a 3275VL01 CDRL - A001 COC.pdf | ||
| C8.1 3275-VL01 ODS.doc | DOC document | |
| 3275VL01 DID_DI-SESS-81000F - Tailored.pdf | ||
| C8b 3275VL01 CDRL - A002 TIR.pdf | ||
| Solicitation N4523A-24-Q-4002.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ORDERING DATA SHEET – GENERAL
NOUN NAME: HOSE ASSEMBLY
DESCRIPTION:
• 1/2 INCH ID X 1500 INCHES OVERALL LENGTH (LENGTH TOLERANCE: +/- 2 PERCENT)
• 2,000 PSI WORKING PRESSURE
• 8,000 PSI BURST PRESSURE
• MAX FLUID TEMPATURE: 450 DEGREES FAHRENHEIT
• MINIMUM BEND RADIUS: 3 IN
• VACUUM SERVICE RATING: 28 IN HG
• ONE CONTINUOUS LENGTH, NO SPLICING ALLOWED
MATERIAL:
• SMOOTHBORE PTFE LINER (EXTRUDED TEFLON TUBE)
• COVERED WITH WHITE ST-FLEX SILICONE OUTER JACKET (OUTER REINFORCEMENT COVER)
• SINGLE 304 STAINLESS STEEL WIRE BRAID
• 304 STAINLESS STEEL CRIMP COLLARS
• 316 STAINLESS STEEL 1/2 INCH FEMALE JIC ENDS FITTING
manufacturer/VENDOR P/N: N/A
QUANTITY: 2 EACH
Additional NOTEs:
• SEE STATEMENT OF WORK (SOW) FOR ADDITIONAL REQUIREMENTS.
***CERTIFICATE OF COMPLIANCE (COC) REQUIRED***
Changes to specification or other technical requirements are not allowed without Shipyard approval via the Administrative Contracting Officer (ACO).
JOB ORDER
36MNF-08013
KEY OP
F01
KO ITEM
REV
IDN
3275VL03
IDN REV
2305.3 Form; Rev 02/2020
File details come from the government source that posted it. Updated .