C8.1 3275-VL01 ODS.doc
DOC document 39 KB Posted
- Attached to
- Hose Assemblies Federal contract opportunity
- Solicitation number
- N4523A-24-Q-4002
About this file
This ordering data sheet specifies technical requirements for hose assemblies to be procured under solicitation number N4523A-24-Q-4002 issued by the Department of the Navy Naval Supply Systems Command. The hose assemblies must be 1/2 inch in diameter and 120 inches in overall length with a 2,000 psi working pressure and 8,000 psi burst pressure. Additional requirements include a maximum fluid temperature of 450 degrees Fahrenheit, a minimum bend radius of 3 inches, and vacuum service rating of 28 inches of mercury. The hose assemblies must have a smoothbore PTFE liner covered with a white ST-FLEX silicone outer jacket and reinforced with a single 304 stainless steel wire braid and 316 stainless steel crimp collars and 1/2 inch female JIC ends. Bidders must comply with additional requirements specified in the statement of work and provide a certificate of compliance with their response.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation N4523A-24-Q-4002.pdf | ||
| C8b 3275VL01 CDRL - A002 TIR.pdf | ||
| C8.3 3275-VL03 ODS.doc | DOC document | |
| 3275VL01 DID_DI-SESS-81000F - Tailored.pdf | ||
| 3275VL01 DID_DI-NDTI-80809B - Tailored.pdf | ||
| C8.2 3275-VL02 ODS.doc | DOC document | |
| 3275VL01 CDRL - A003 Bid Proposal Approval.pdf | ||
| 3275VL01 Hose SOW.docx | DOCX document | |
| C8a 3275VL01 CDRL - A001 COC.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ORDERING DATA SHEET – GENERAL
NOUN NAME: HOSE ASSEMBLY
DESCRIPTION:
• 1/2 INCH ID X 120 INCHES OVERALL LENGTH (LENGTH TOLERANCE: +/- 2 PERCENT)
• 2,000 PSI WORKING PRESSURE
• 8,000 PSI BURST PRESSURE
• MAX FLUID TEMPATURE: 450 DEGREES FAHRENHEIT
• MINIMUM BEND RADIUS: 3 IN
• VACUUM SERVICE RATING: 28 IN HG
• ONE CONTINUOUS LENGTH, NO SPLICING ALLOWED
MATERIAL:
• SMOOTHBORE PTFE LINER (EXTRUDED TEFLON TUBE)
• COVERED WITH WHITE ST-FLEX SILICONE OUTER JACKET (OUTER REINFORCEMENT COVER)
• SINGLE 304 STAINLESS STEEL WIRE BRAID
• 304 STAINLESS STEEL CRIMP COLLARS
• 316 STAINLESS STEEL 1/2 INCH FEMALE JIC ENDS FITTING
manufacturer/VENDOR P/N: N/A
QUANTITY: 2 EACH
Additional NOTEs:
• SEE STATEMENT OF WORK (SOW) FOR ADDITIONAL REQUIREMENTS.
***CERTIFICATE OF COMPLIANCE (COC) REQUIRED***
Changes to specification or other technical requirements are not allowed without Shipyard approval via the Administrative Contracting Officer (ACO).
JOB ORDER
36MNF-08013
KEY OP
F01
KO ITEM
REV
IDN
3275VL01
IDN REV
2305.3 Form; Rev 02/2020
File details come from the government source that posted it. Updated .