C12_Salient Characteristics.xlsx
XLSX spreadsheet 21 KB Posted
- Attached to
- N0016426Q0084
- Solicitation number
- GXN-0029
About this file
This file contains the salient characteristics and technical specifications for a 1,000 lb. (1/2 ton) hoist and trolley system required under Navy solicitation N00164-26-Q-0084. The trolley must feature stainless steel identification tags, solid steel wheels with sealed bearings, rubber bumpers on both sides, and a flange adjustment range of 3.33" to 7.00" with a tow arm for festooning. The hoist shall be chain-driven with a 20-foot lift capacity, 16-foot pendant drop, and 2-speed operation (16/8 FPM) powered by 208V/3/60 primary and 120V secondary electrical service. The hoist requires internal overload clutch, load brake, geared upper/lower limit switches, paddle secondary limit switch, non-resettable hour meter, and electric brake. The unit must be cross-mounted with zinc-plated chain, mounted in a NEMA 4 wall-mounted enclosure with 50 feet of flat wire festooning, and include two handheld radio remote controllers with on/off selectors.
Extensive documentation and certifications are mandated, including OEM load test certificates at 125% capacity, operations and maintenance manuals, hazardous material certificates, brake setting reports, and material certificates for chain and hooks. Hooks must be non-painted and undergo Non-Destructive Testing (NDT) using magnetic particle method per NAVSEA Technical Publication T9074-AS-GIB-010/271 or liquid penetrant method per ASTM E1417, with acceptance criteria of no linear indications greater than 1/16 inch. The equipment must comply with Navy Crane Center Instruction NAVCRANECENINST 11450.2A and ASME B30.16. This 100% small business set-aside solicitation closes on 12 MAR 2026 at 4:00 PM Eastern Time, with quotes to be submitted to trista.m.ray.civ@us.navy.mil.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| C11_RFQ_N0016426Q0084.pdf | ||
| C11_Synopsis.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| Trolley | |
| Capacity (Labeled in Pounds) | 1,000 lbs. (1/2 Ton) |
| Stainless Steel ID Tags | Required |
| Wheels Material | Solid Steel |
| Wheel Bearings | Sealed |
| Drop Stops (less than 1 Inch) | Required |
| Rubber Bumpers (both sides) | Required (two 1,000 lb. hoists will be operating on the same monorail and must be able to contact one another via bumpers to prevent any metal-to-metal contact.) |
| Trolley Movement | Push/Pull |
| Trolley Flange Adjustment Range | 3.33" - 7.00" |
| Tow Arm for Festooning | Required |
| I Beam Type | WF Beam |
| Hoist | |
| Capacity (Labeled in Pounds) | 1,000 lbs. (1/2 Ton) |
| Lift | 20 Ft. |
| Hoist Type | Chain |
| Stainless Steel ID Tags | Required |
| Pendant Drop | 16 Ft. |
| Pendant Strain Relief | Internal |
| Power | 208/3/60 Secondary 120V |
| Geared Upper/Lower Limit Switches | Required |
| Paddle Secondary Limit Switch | Required |
| Control Type | 2 Speed Hoist |
| Lift Speed | 16/8 FPM |
| Non Resettable Hour Meter | Required |
| Internal Overload Clutch | Required |
| Internal Load Brake | Required |
| Electric Hoist Brake | Required |
| Mounting Confguration | Cross Mounted |
| Load Chain | Zinc Plated |
| Chain Container | Required |
| Hook NDT | Required to meet ASTM A275 with Level 3 Exam |
| Electrical | |
| Primary Power | 208/3/60 |
| Secondary Voltage | 120V |
| Power Supply Connection | Wall Mounted NEMA 4 Enclosure with 50 feet of festoon to hoist with connectors on each end |
| Festooning Wiring | Flat Wire |
| Motor Duty Rating | 60 Minute Duty Rated with embedded T-stats |
| Electrical Enclosures | NEMA 4 |
| Primary Tranformer Fusing | Required |
| Secondary Transformer Fusing | Required |
| Mainline Contactor | Required |
| Motor Fusing | Required |
| Hoist Brake Fusing | Required |
| Pendant and Festoon Wiring | Requires 20% spare wires available |
| Control Enclosure Mounted LED's Lights | Color |
| Power Availabe @ the Mainline Contactor | White |
| Mainline Contactor Energized | Blue |
| Other | |
| Hooks | Non-Painted |
| Capacity's | Relabel all capacity in pounds |
| Keyed Switch | Keyed bypass for upper paddle limit switch to test and reset limit. |
| Keyed Switch | Keyed Hoist Motor Brake Bypass to Test Hoist Load Brake Individually |
| Documentation | |
| OEM Load test Cert at 125% | |
| Certificte of Conformance | |
| Operations and Maintenance Manual | |
| Hazardous Material Cert | |
| Cert stating that the hoist can be periodically load tested to 125% of rate capoacity per ASME B30.16 | |
| Cert stating the the hoist can subjected to a loss of power test without detrimental defects | |
| Chain Material Cert | |
| Hook Material Cert | |
| Specifications | |
| Must meet the Navy Crane Center Instruction NAVCRANECENINST 11450.2A |
Sheet2
| Documentation |
| Provide load test certification to 125% capacity |
| Provide Operation and Maintenance Manuals for all equipment |
| Provide Hazardous Material Certificates |
| Provide certificate that states the equipment provided can be periodically load tested to 125% of the rated capacity per ASME B30 |
| Provide a certificate that the equipment provided can be subjected to a loss of power tes without detrimental effects |
| Provide a brake setting report for all equipement |
| Provide a chain material certificate |
| Provide a hook material certificte |
| Other |
| Hoist shall be direct mounted to motorized trolley |
| Provide radio remote controller(2 handheld units) for all crane functions (must have on/off selector) |
| Provide 3 positioned ke |
| Do not paint/plate hook |
| Hook shall be NDT tested and certificatie provided that show it meet the following requirments. NDT shall be the magnetic particle method in accordance with NAVSEA Technical Publication T9074-AS-GIB-010/271. ASTM A275 may be used with the following restrictions: DC yokes (including switchable AC/DC yokes used in the DC mode) and permanent magnet yokes shall not be used; automatic powder blowers or any other form of forced air other than from a hand-held bulb shall not be used for the application or removal of dry magnetic particles; arc strikes shall be removed; and equipment ammeters shall have an accuracy of +/- 5 percent of full scale (equipment ammeter accuracy other than that stated is acceptable provided the MT procedure states that a magnetic field indicator is used to establish and verify adequate field strength for all aspects of the inspection). For hooks of non-magnetic material, NDT shall be the liquid penetrant (PT) method in accordance with ASTM E1417 or T9074-AS-GIB-010/271. For PT testing of hooks containing stainless steels, titanium, or nickel-based alloys, total halogens, and sulfur used in the NDT process shall be controlled as specified in T9074-AS-GIB-010/271. If NDT cannot be performed on surfaces inside small holes (e.g., hook/nut captivation roll pin holes), those surfaces shall be visually inspected to the maximum extent practical. Acceptance criterion shall be no linear indications greater than 1/16 inch. Acceptance criteria for external hook threads may be based on the acceptance criteria in SAE J123 or ASTM F788. NDT shall be performed prior to load tests. |
File details come from the government source that posted it. Updated .