C04_Attachment 1 SOW_1232SA26Q0659.pdf

This is a Statement of Work (SOW) for a construction project to install a backup generator system at the USDA Agricultural Research Service's National Clonal Germplasm Repository in Riverside, California. The project, titled "Install Backup Generator," is located at 1060 Martin Luther King Boulevard, Riverside, CA 92546, with Building Permit #B24-001125 004 approved on July 3, 2025.

The contractor must provide all labor, equipment, and materials to install a Government-furnished 200 kW Cummins C200D6D generator with an automatic transfer switch (Government-furnished Cummins OTECSE800) on a newly constructed 6-inch concrete pad measuring 64" x 204". Work includes demolishing the existing generator and concrete pad, constructing the new pad with specific requirements (3,500 psi compressive strength, #4 reinforcement at 12" on center, 1' minimum crushed rock base), installing underground conduit between the generator and transfer switch, removing and installing new asphalt, and providing all trenching, wiring, and conduit connections. The contractor must also acquire state and local permits (local electrical permit, South Coast Air Quality Management District permits), coordinate manufacturer startup and commissioning with a 4-hour load bank test, provide operator training, and submit manufacturer's descriptive literature for review. All work must comply with the National Electrical Code, applicable federal/state/local codes, and industry standards. The project schedule indicates the automatic transfer switch is scheduled to arrive July 2025, with the generator delivery date to be determined. Government will furnish electricity, water, and the generator, automatic transfer switch, and remote emergency stop switch. Key contact personnel include Location Monitor Dr. Robert Krueger (951-827-6980) and Engineering Project Manager Peter Lane (510-559-6340).