Catalog Number

Notes

Type

CONTRACTOR SELECT ECRG LED Page 1 of 3

ECRG

Lithonia Lighting Basics™ Emergency Light/Exit Combo

The Lithonia Lighting® ECRG, is a combination of exit and emergency lighting. The ECRG is ideal for safely illuminating the path of egress above-the-door in small spaces at lower mounting heights while providing 90 minutes of emergency power. Available in red and green letters.

FEATURES:

¡ Internal toggle switch for red or green exit

¡ Test switch and status indicator

¡ UL indoor damp location 50°F to 104°F (10°C to 40°C) listed standard

¡ ECRG RD: multi-voltage 120-277V, 50/60Hz

¡ ECRG SQ: dual-voltage 120/277, 60Hz

Accessories: Order as separate catalog number.

ERE W SGL RD Single, LED indoor remote head, round, ivory white, .75W, 3.6V input.

See spec sheet ERE.1

ERE W T RD Twin, LED indoor remote head, round, ivory white, 1.5W, 3.6V input.

See spec sheet ERE.1

ERE GY SGL WP RD Single, LED weather-proof head, round, gray,0.75W, 3.6V input.

See spec sheet ERE.1

ERE GY T WP RD Twin, LED weather-proof head, round, gray, 1.5W, 3.6V input.

See spec sheet ERE.1

ERE GY SGL WP SQ Single, LED weather-proof remote head, square, gray, 1W, 3.6V-12V voltage sensing. See spec sheet ERE.1

ERE GY T WP SQ Twin, weather-proof, remote head, square, gray, 2W, 3.6V-12V voltage sensing.

See spec sheet ERE.1

ELA WG3 Wireguard (back mount), 30 5/8"W x 13 3/4"H x 6"D. See spec sheet ELA-WG.

Contractor Select™

Catalog Number UPC Description Supply

Voltage

Input Wattage Input Amps Pallet Qty

Carton Qty120 277 120 277

ECRG RD M6 00194994900412 Red/Green LED Exit/Unit Combo, Round Lamp Heads 120-277V 2W 2W .03 .02 240 6

ECRG HO RD M6 00194994900429 Red/Green LED Exit/Unit Combo with remote capacity, Round Lamp Heads 120-277V 2.8W 2.8W .05 .03 216 6

ECRG SQ M6 00194994900467 Red/Green LED Exit/Unit Combo, Square Lamp Heads 120/277V 3.5W 3.5W .03 .02 72 6

ECRG HO SQ M6 00194994900504 Red/Green LED Exit/Unit Combo with remote capacity, Square Lamp Heads 120/277V 4W 4W .03 .02 72 6

Battery Total Capacity Maximum# Remote Lamp Heads*

3.6V

2W

(ECRG RD)

2 - ERE W SGL RD M24

1 - ERE W T RD M24

2 - ERE GY SGL WP RD M12

1 - ERE GY T WP RD M12

3W

(ECRG SQ)

3 - ERE GY SGL WP SQ M12

1 - ERE GY T WP SQ M12

* Remotes are in addition to the lamp heads on the product.

Battery Capacity and Loading (HO only)

1 Only available with HO option.

† Exit Signs Certified in the CA Title 20 Appliance Efficiency Database.

https://www.acuitybrands.com/products/detail/832782/lithonia-lighting/ere-emergency-remote-light-head/lithonia-lightingr-led-emergency-remote-light-head https://www.acuitybrands.com/products/detail/832782/lithonia-lighting/ere-emergency-remote-light-head/lithonia-lightingr-led-emergency-remote-light-head https://www.acuitybrands.com/products/detail/832782/lithonia-lighting/ere-emergency-remote-light-head/lithonia-lightingr-led-emergency-remote-light-head https://www.acuitybrands.com/products/detail/832782/lithonia-lighting/ere-emergency-remote-light-head/lithonia-lightingr-led-emergency-remote-light-head https://www.acuitybrands.com/products/detail/832782/lithonia-lighting/ere-emergency-remote-light-head/lithonia-lightingr-led-emergency-remote-light-head https://www.acuitybrands.com/products/detail/832782/lithonia-lighting/ere-emergency-remote-light-head/lithonia-lightingr-led-emergency-remote-light-head https://img.acuitybrands.com/public-assets/catalog/1429691/ela-wg.pdf?abl_version=04%2f28%2f2022+12:08:47&DOC_Type=SPEC_SHEET davidpdonahue Rectangle

One Lithonia Way, Conyers, GA 30012 | 800-705-SERV (7378) | Techsupport-Lighting@Acuitybrands.com | www.lithonia.com © 2020-2025 Acuity Brands Lighting, Inc. All rights reserved. Rev. 02/06/25 Page 2 of 3

CONTRACTOR SELECT ECRG LED

Dimensions

All dimensions are inches (centimeters) unless otherwise indicated.

16.46 (41.8)

11.63 (29.54)

7.24 (18.3)

2.05 (5.2)

5.5 (13.97) 4.32 (10.92)

7.99 (20.3)

Length:

16.46 (41.8) Depth:

2.05 (5.2) Height:

7.24 (18.3) Weight:

RD - 1.9 (0.86kgs) HO RD - 1.95 (0.88kgs)

ECRG RD

Example of single ECRG RD illuminating a 3' path of egress.

Example of multiple ECRG RD luminaires illuminating a 3' path of egress.

14'

1 FC average

3'

7.5'

3'

18'

1 FC average

ECRG RD

Maximum Spacing Guidelines1

Series Mounting

Height Illumination

Level

Single Luminaire Multiple Luminaires Application

Notes3' Path of Egress

6' Path of Egress

3' Path of Egress

6' Path of Egress

ECRG

RD

7.5' 1FC Avg 14' 10' 18' 14'

"100' Corridor 8' wide, and 9' high with

80/50/20 reflectances"

ECRG

SQ

7.5' 1FC Avg 10' 6' 14' 11'

Notes:

1. Also meets the additional illumination requirements of NFPA 101: 1FC minimum and max/min ratio of 40:1.

Spacing guidelines

10'

1 FC average

3'

7.5'

3'

14'

1 FC average

Example of single ECRG SQ illuminating a 3' path of egress.

Example of multiple ECRG SQ luminaires illuminating a 3' path of egress.

ECRG SQ

11 5/8 ”

7 3/16 ”

1 5/8 ”

Integrated Exit-Unit Combo

12-5/8" (32.1)

9-1/8" (23.18)

4-3/8" (11.1)

5-1/2" (13.97)

8-1/4" (20.95)

1-7/8” (4.8)

LED Unit

LED Combo

LED Exit

15 (38.1)

3-3/4 (9.5)

5-3/8 (13.7)

12 (30.5)

3-3/4 (9.5)

(5.1)

4.33" (10.9)

4-1/2" (11.4)

9" (22.9)

7.95" (20.1)

19.09" (48.4)

12" (30.5)

ECRG SQ

Length:

19.09 (48.4) Depth:

4.33 (10.9) Height:

7.95 (20.1) Weight:

SQ - 3.09 lbs. (1.40kgs) HO SQ - 3.25 lbs (1.47kgs)

ECRG side/end mount example mailto:Techsupport-Lighting%40Acuitybrands.com?subject= http://www.lithonia.com

One Lithonia Way, Conyers, GA 30012 | 800-705-SERV (7378) | Techsupport-Lighting@Acuitybrands.com | www.lithonia.com © 2020-2025 Acuity Brands Lighting, Inc. All rights reserved. Rev. 02/06/25 Page 3 of 3

CONTRACTOR SELECT ECRG LED

INTENDED USE:

Provides a minimum of 90 minutes illumination for the rated wattage upon loss of AC power to meet code required emergency lighting. Ideal for applications requiring low profile, emergency unit for lower mounting heights. The ECRG has an internal switch that ships standard as a red emergency light/exit combo and can be switched in the field to green. It is also packaged standard with an extra faceplate along with red and green inserts.

CONSTRUCTION:

The housing is a standard white thermoplastic with a compact and low-profile design with all-inclusive lamp, reflector and lens assembly. It is 5VA flame rated and impact-resistant.

Ships with extra faceplate to quickly convert from single to double face exit sign depending on the application. Universal chevrons are easily removed for directional indication.

Letters 6" high with 3/4" stroke, with 100 ft. viewing distance rating, based upon UL924 standards.

OPTICS:

The typical life of the exit LED is >5 years, based on 24/7 operation.

ECRG is 0.75W white LED per lamp head ECRG SQ is 1W LED per lamp head.

Lumen: RD 85 lumens SQ 113 lumens

ELECTRICAL:

ECRG RD: multi-voltage 120-277V, 50/60Hz.

ECRG SQ: dual-voltage 120/277V, 60Hz.

LED Status indicator for battery condition (Red-Charging/Normal; Unlit-Check Battery).

ECRG HO RD has 2W of remote capacity and ECRG HO SQ has 3W of remote capacity.

BATTERY: 3.6V maintenance-free, rechargeable, Nickel metal hydride.

INSTALLATION:

ECRG RD: Top, end and back mount.

ECRG SQ: Top, end and back mount.

For end/side mount, only 1 lamp head can be utilized and lumen output is reduced.

Mounting pattern on canopy (top and side mount) and back plate (back mount) fits most standard size junction boxes.

LISTINGS:

UL Listed. Meets all applicable requirements for UL 924, NFPA 101 (current Life Safety Code), NFPA 70 (NEC), California Energy Commission Title 20 section 1605.3 (W)(4), FCC Title 47, Part 15, Subpart B and OSHA.

Indoor damp location 50°F to 104°F (10°C to 40°C) listed.

WARRANTY:

2-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/ warranty/terms-and-conditions Note: Actual performance may differ as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Specifications subject to change without notice.

Specifications mailto:Techsupport-Lighting%40Acuitybrands.com?subject= http://www.lithonia.com http://www.acuitybrands.com/support/warranty/terms-and-conditions http://www.acuitybrands.com/support/warranty/terms-and-conditions

Specifications subject to change without prior notice.

www.engproducts.com

5401 SMETANA DRIVE | MINNETONKA, MN 55343

P 800.336.1976 | F 800.336.2801

PRODUCT DATA SHEET

LIG

H

TIN

G

PRO

D

U C

TS

UNITS OF MEASURE KEY

Order Unit: The Unit to be ordered; Order Qty: Number of pieces in each Unit; Unit Pkg: Packaging types - BG (Bag), BX (Box), BN (Bulk); Units/Case: Unit packages contained in the Case; TL Case Qty: The total number of items in each Master Case; Min Order Qty: The smallest Unit that can be ordered; MM Req: Must order multiples of the Unit in the stated quantities; Ship Wt (Lbs): Total weight of the Units per Carton n UL Listed. File Number: E236781.

n Nickel-plated Brass Screw Shell will not corrode.

n For Commercial, Industrial, Residential and Agricultural Lighting Applications.

n UV resistant Lamp Holders will not fade or discolor.

n Optional Plastic and Metal Safety Cages fit all Edison Base (E26) Lamp Holders.

n Includes corrosion resistant stainless steel mounting screws.

n Medium Base fits 3.25 inch or 4.0 inch Outlet Box.

n Meets the requirements of the 2017 National Electrical Code:

LAMP HOLDERS

PORCELAIN AND PLASTIC

Lamp Holder Accessories

Part Number:

16500

Part Number:

16514

Part Number:

16526

Part Number:

16502

Part Number:

16520

Part Number:

16100

Part Number:

16510

Part Number:

16522

Part Number:

16501

Part Number:

16512

Part Number:

16524

Lamp Holder (P/N: 16512) shown with Metal Safety Cage (P/N: 16501) davidpdonahue Rectangle

Rectangle

Product Bulletin for SmartlockPro® Self-Test GFCIs

Industry-leading quality, professional grade lockout action, and the slimmest profile on the market make SmartlockPro Self-Test GFCIs a smart choice in ground fault circuit interrupter protection. Engineered to meet the latest UL standard for auto-monitoring (self-test), our complete line of self-test GFCIs periodically conduct an automatic internal test to confirm that protected power is available. If the GFCI detects a problem, one or more of the following will occur:

- �Power will be denied (trip with the inability to reset)

- �Trip with the ability to reset, subject to the next auto-monitoring test cycle or repeatedly trip

- �Visual and/or audible indication

Faster and easier to install in any wallbox because the depth is reduced, our slim Self-Test GFCIs flush mount to the wall with minimal protrusion for a sleek, finished look.

New SmartlockPro® Self-Test GFCIs For Smarter Protection.

Applications Residential – Kitchens, bathrooms, garages, basements, laundry rooms, wet sink and other wet locations around the home Educational Facilities – Classrooms, restrooms, laboratories, dormitories and kitchens Airports – Public bathrooms, general use and maintenance areas Restaurants, Lodging and Retail Malls – Public bathrooms, general use and maintenance areas Commercial Offices – Bathrooms, basement areas, hallways and kitchen facilities Public Areas – Wherever receptacles are located near wet or damp locations

Status Indicator Light Red and green LED indications provide simple, intuitive feedback on power and protection status as well as correct wiring

Leviton Patented Reset Lockout Prevents reset if GFCI is damaged and cannot respond to a ground fault

Tamper-Resistant Shutters Meets NEC® 406.12 requirement by blocking access to the contacts unless a two- or three-prong plug is inserted

Standard Self-Ground Clip Grounds the device in grounded metal box installations

Only 1.026” Protrusion into Wallbox Takes up to 25% less space in the wallbox

vs. other GFCIs for easier installation

Terminals Withstand High Torque Tolerate high-torque power tool installation and prevents wire pullout

Back and Side Wire Two convenient wiring options; the external clamp also provides visual indication of proper wire seating

Self-Test ��Provides continuous ground fault protection – detects and trips on actual ground fault even when self-test is being conducted �On initial power up, tests the GFCI within 3 seconds �Auto-monitoring exceeds the UL requirement �Auto adapts and shifts to more frequent testing if potential problem is detected ��Testing frequency regularly updates protection status ��Electronics are designed to minimize any false triggers

General Features �Patented bridge contact provides individual sets of contacts for GFCI receptacle face and downstream receptacles; no power will be delivered to receptacle face if improperly wired (line-load reversed) �Trip threshold meets or exceeds UL requirements for tripping time �Improved immunity to high frequency noise reduces nuisance tripping �Advanced electronics provides superior resistance to electrical surges and over-voltages �Patented Lockout Action prevents reset if GFCI is damaged and cannot respond to a ground fault �Status Indicator Light provides simple, intuitive feedback on power and protection status as well as indication of line/load reversal �Silver alloy contacts �Impact-resistant thermoplastic cover and body �One-piece T-design trip latch mechanism provides efficient operation �Available in 15A and 20A versions, all with Fed Spec rating �TEST and RESET button colors match device face ��Compatible with all Decora® devices and wallplates; available in select Decora colors �Limited Two-Year Product Warranty

Tamper-Resistant (TR) Models �Complies with NEC® requirement mandating that all 15A and 20A receptacles installed in dwelling units be listed as tamper-resistant �Shutter mechanism inside the receptacle blocks access to the contacts unless a two- or three-prong plug is inserted

Duplex Guide Light Models �Sensor provides automatic ON/OFF based on ambient lighting �Dual lens provides visible light with a variety of plugs or transformers �Custom designed lenses with edge-mounted LEDs improve light dispersion �Energy-efficient (~1W of electricity). No bulbs to replace �Saves space by eliminating the need to use an outlet for a plug-in night light

Weather-Resistant Models �Designed for wet and damp locations to meet the requirements of NEC Section 406.8 �Stainless steel strap and screws �Conformal coated PC board to protect critical components from moisture �Cold impact resistant face and buttons �UV stabilized plastics

Audible Models �Audible alarm sounds when the GFCI trips, providing an alert that power has been disconnected from load(s) plugged into or fed from the GFCI ��Indicator light provides visual status

Features and Benefits

1.03 (26.1)

1.69 (42.7)

1.31 (33.3)

.2

.1

.7

.6

.2

.9

.8

.8

1.32 (33.6)

15A SmartlockPro® Self-Test GFCI 20A SmartlockPro® Self-Test GFCI

1.69 (42.8 mm)

1.31 (33.3 mm)

.8

.8 m m

.2

.0 m m

.7

.6 m m

.2

.9 m m

1.03 (26.1 mm)

1.40 (35.5 mm)

GREEN LED - NORMAL OPERATION

- GFCI has passed self-test and is providing power

RED LED - ALERT!

- Blinking - Initial self-test upon first power up

- Solid or blinking - Press TEST and RESET buttons to reset GFCI

- If GFCI will not reset OR solid or blinking red continues, replace device

NO LED - NO POWER

- GFCI in tripped state

- Press RESET button

- If GFCI will not reset, no power on the circuit

Agency Standards and Compliance �Meets the latest UL requirements �UL Standard 943 Class A (GFCI) and 498 (Receptacles) �UL Listed (File #E-48380) �CSA Certified (File #LR-57811) �NOM Certified �Meets Federal Specification W-C-596G (blank face - exception)

Material Characteristics �Environmental: Flammability UL-94 V2 Rating �Operating Temperature: -35°C to 66°C �Material: Face, Thermoplastic; Body, Polycarbonate

Status Indicator Light Leviton GFCI devices feature an LED Status Indicator Light which provides a visual indication to the user of the status of GFCI protection. This is a convenient way to check the level of protection at-a-glance.

G-8347B/D15-dp

Ordering Information Commercial Spec Grade – Back and Side Wired

NEMA

Rating

TR Non-TR TR Non-TR

White GFTR1-W GFNT1-W GFTR2-W GFNT2-W

Ivory GFTR1-I GFNT1-I GFTR2-I GFNT2-I

Light Almond GFTR1-T GFNT1-T GFTR2-T GFNT2-T

Gray GFTR1-GY GFNT1-GY GFTR2-GY GFNT2-GY

Black GFTR1-E GFNT1-E GFTR2-E GFNT2-E

Brown GFTR1 GFNT1 GFTR2 GFNT2

Red - - - GFNT2-R

White GFWT1-W GFWR1-W GFWT2-W GFWR2-W

Ivory GFWT1-I - GFWT2-I -

Light Almond GFWT1-T - GFWT2-T -

Gray GFWT1-GY - GFWT2-GY -

Black GFWT1-E GFWR1-E GFWT2-E GFWR2-E

White GFNL1-W - GFNL2-W -

Ivory GFNL1-I - GFNL2-I -

Light Almond GFNL1-T - GFNL2-T -

Black GFNL1-E - - -

White GFTA1-W - GFTA2-W -

Ivory GFTA1-I - GFTA2-I -

Light Almond GFTA1-T - GFTA2-T -

White GFSW1-W - - -

Ivory GFSW1-I - - -

Light Almond GFSW1-T - - -

White

Ivory

Light Almond

Description Color Cat. No. Cat. No.

NEMA 5-15R NEMA 5-20R

15A-125V @ Receptacle 20A-125V Feed-Through

20A-125V @ Receptacle 20A-125V Feed-Through

Duplex with LED Indicator (with self-grounding clip)

Duplex Weather-Resistant/ Outdoor Grade with LED Indicator

Duplex Guide Light with LED Indicator (with self-grounding clip)

Duplex with Audible Trip Alert with LED Indicator (with self-grounding clip)

Combination Switch with LED Indicator (with self-grounding clip) (15 Amp @ 120 VAC Switch rating)

Blank Face with LED Indicator (with self-grounding clip) (20A feedthrough rating only)

GFRBF-W

GFRBF-I

GFRBF-T

Leviton Manufacturing Co., Inc. World Headquarters 201 North Service Road, Melville, NY 11747-3138 Telephone: 1-800-323-8920 FAX: 1-800-832-9538 Tech Line (8:30AM-7:00PM E.T. Monday-Friday): 1-800-824-3005

All trademarks are the property of their respective owners.

Visit our Website at: www.leviton.com/gfci © 2015 Leviton Manufacturing Co., Inc. All rights reserved.

EXPOSED

FASTENING

SYSTEM

PBR

844-327-1748 | mbci.com | shop.mbci.com

The PBR panel is commonly used for a wide variety of architectural, agricultural, commercial and industrial applications. PBR is a structural panel and an exposed fastener panel that can be used for both roof and wall applications. The minimum roof slope for PBR is ½:12.

Applications: Roof and Wall

Coverage Widths: 36"

Rib Spacing: 12" on center

Rib Height: 11/4"

Minimum Slope: ½:12

Panel Attachment:

Exposed Fastening System

Gauges: 26 (Standard);

22, 24, 29 (Optional)

Finishes: Smooth (Standard);

Embossed (Optional)

Coatings: Galvalume® Plus, Galvanized with Acrylic Coating*, Signature® 200, Signature® 300

PRODUCT SPECIFICATIONS

36" 12" 1" ³⁄4"

4" 4" 4" 1 ¹⁄4"

3 ¹⁄16" 1 ³⁄8"³⁄16"

PBR Panel

Color Side

*Galvanized with Acrylic Coating helps to resist “white rust” and prevent stack storage issues. For use in agricultural, animal confinement, and other applications where moisture protection is needed. Only available in 26 gauge panels.

davidpdonahue Highlight davidpdonahue Highlight

Highlight

EXPOSED FASTENING SYSTEM

Descriptions and specifications contained herein were in effect at the time this publication was approved for printing. In a continuing effort to refine and improve products, MBCI reserves the right to discontinue products at any time or change specifications and/or designs without incurring obligation. Projects should be designed to conform to applicable building codes, regulations and accepted industry practices. To ensure you have the latest information available, please inquire or visit our website: mbci.com.

© 2025 MBCI, part of Cornerstone Building Brands, Inc. ALL RIGHTS RESERVED. 0706209991116/RevD/MS/1025

844-327-1748 | mbci.com | shop.mbci.com

PBR - EXPOSED FASTENING SYSTEM

CATEGORY CHARACTERISTIC TEST METHOD PURPOSE RESULT

ENVIRONMENTAL Air-leakage Through Roof Panel Joints

ASTM E1680 Determines the air leakage characteristics of metal roof panels under specified air pressure differences at ambient conditions

0.005 cfm/ft2 at 1.57 psf static pressure

0.006 cfm/ft2 at 6.24 psf static pressure

Water Penetration Through Roof Panel Joints

ASTM E1646 Determines the resistance to water penetration of metal roof panels under uniform static air pressure difference

No uncontrolled water penetration through the panel joints at a static pressure of 20.00 psf

Impact Resistance UL 2218 Determines impact resistance of prepared toof covering materials

Class 4 Rating

FIRE RESISTANCE Room Fire Performance UL 790 Standard for Standard Test Methods for Fire Tests of Roof Coverings

See Class A Fire Rating Data Sheet

Room Fire Performance UL 263 Standard for Fire Tests of Building Construction and Materials

For use in Design Nos. P225, P227, P230, P237, P265, P268, P508, P510, P512, P701, P711, P720, P722, P726, P731, P734, P801, P815, P819.

STRUCTURAL Uplift Resistance AISI S100 Provides a standard procedure to evaluate or confirm structural performance under uniform static air pressure difference

See Section Properties and Allowable Load Table Section

Gravity Loads AISI S100 North American Specification for the Design of Cold-Formed Steel Structural Members

See Section Properties and Allowable Load Table Section

ROOF LISTINGS Roof Performance

- FM Global

FM 4471 Sets performance standards for panel roofs including uplift resistance

See FM Engineering Tech Bulletin

Roof Performance -Underwriters Laboratories

UL 580 Determines the uplift resistance of roof assemblies c onsisting of the roof and roof coverings materials

Class 90 Rating - Construction Number 30, 54, 79, 104, 112, 161, 167, 184 and 542

Roof Performance

- Miami-Dade County

TAS 125

TAS 201

TAS 100

FM 4471 App. G

The Product Control Approval System establishes a protocol to evaluate the standards of products used in construction in Miami-Dade County. Miami- Dade County, with its inclusion in the High Velocity Hurricane Zone (HVHZ), has the most stringent code requirements of the Florida Building Code. Therefore, all products that comprise the structure’s building envelope –doors, shutters, windows, prefabricated buildings and truss plates–require the issuance of an approval in order to be used for construction in Miami-Dade County

See NOA # 23-1113.05

Roof Performance

- Florida Approval

ASTM E 1592

FM 4471

UL 790

Florida product approval is the approval of products and systems, which comprise the building envelope and structural frame, for compliance with the structural requirements of the Florida Building Code

See FL # 42379.5 See FL # 42382.12

Roof Performance

- Texas Department of Insurance

ASTM E 1592 TWIA provides windstorm and hail insurance in areas exposed to hurricanes and currently provides windstorm and hail coverage in the following 14 “first tier” Texas coastal counties: Aransas, Brazoria, Calhoun, Cameron, Chambers, Galveston, Jefferson, Kenedy, Kleberg, Matagorda, Nueces, Refugio, San Patricio and Willacy

RC-393

TDI 3rd Party Evaluation

FL 42382.12

WALL LISTINGS Wall Performance

- Miami Dade County

TAS 201

TAS 202

TAS 203

The Product Control Approval System establishes a protocol to evaluate the standards of products used in construction in Miami-Dade County. Miami- Dade County, with its inclusion in the High Velocity Hurricane Zone (HVHZ), has the most stringent code requirements of the Florida Building Code.

See NOA # 23-0606.07

Wall Performance

- Florida Approval

ASTM E1592 Florida product approval is the approval of products and systems, which comprise the building envelope and structural frame, for compliance with the structural requirements of the Florida Building Code.

See FL # 42378.10