broward TRN2133129B1 - Specifications and Requirements.pdf

PDF 151 KB Posted

Attached to
Pest Control Services for Transit Vehicles
Solicitation number
TRN2133129B1
Issued by
Broward County, Fort Lauderdale City, Florida

About this file

This document is a Specifications and Requirements file for the Broward County Transportation Department (BCT) in Florida, outlining comprehensive integrated pest management and pest control services for transit vehicles. BCT seeks a contractor to prevent, suppress, and control targeted pests including ants, cockroaches, bed bugs, flies, mosquitoes, rodents, and other identified pests on approximately 415 buses ranging from 40 to 60 feet in length and approximately 60 non-revenue vehicles housed at two facilities: Copans Garage in Pompano Beach (storing approximately 255 buses) and Ravenswood Garage in Dania Beach (storing approximately 160 buses). Services shall be performed monthly during the first five business days of each month between 12:01 AM and 4:00 AM when buses are parked. The contract term consists of one initial year with four one-year renewal options. The contractor may be awarded as either a primary or secondary vendor. No specific response date, bid submission deadline, site visit requirement, or bidders conference is mentioned in this specifications document.

The contractor must maintain all required Florida state licenses and certifications, possess a minimum of three years of commercial pest control experience, and provide documentation of quality control, technician training, and OSHA Hazard Communication programs. The contractor shall furnish all labor, materials, insecticides, pesticides, disinfectants, chemicals, supplies, equipment, and transportation necessary to complete treatments at a unit price covering each designated vehicle. The contractor must comply with federal, state, and local regulations, use only EPA-registered products approved by BCT's Safety and Security Division, and maintain detailed electronic service records accessible to BCT. The contractor warrants all pest control treatments for 30 days from the date of last service, with re-treatment provided at no additional charge within 48 hours of notification if infestation recurs. Invoices must include company information, purchase order number, service details, quantity, pricing per unit, and a comprehensive service report with vehicle identification numbers and any authorized additional services. No specific pricing information, set-asides, incumbent contractor details, or funding sources are identified in this specifications document.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Page | 1

SPECIFICATIONS AND REQUIREMENTS

PEST CONTROL SERVICES FOR TRANSIT VEHICLES

1. SCOPE:

1.1. The Broward County Transportation Department (BCT) is seeking a Contractor to provide comprehensive integrated pest management and pest control services to effectively prevent, suppress, and control targeted pests, insects, rodents, and other identified pests onboard transit buses, non-revenue vehicles, and at designated BCT locations. Services shall be performed no less than once a month between 12:01 AM and 4:00 AM.

1.2. The contract term will consist of a one (1) year initial term with four (4) one-year renewal options.

Contract may be awarded to one or two vendors as Primary and Secondary. The Contractor's unit price shall include all labor, materials, products, equipment, transportation, and supervision necessary to complete the treatment of each designated vehicle

1.3. Target pests include, but are not limited to, ants, cockroaches, bed bugs, flies, midges, mosquitoes, silverfish, spiders, yellow jackets, wasps, bees, rodents, pigeons, and other pests identified by BCT as requiring control. Pests specifically excluded from the Contract shall be identified by BCT.

2. GENERAL INFORMATION:

2.1. BCT operates 24/7/365 and has approximately sixty (60) non-revenue vehicles and four-hundred-fifteen (415) buses to include out of service and spare buses in its fleet. BCT’s buses range from forty (40) to sixty (60) feet in length. The buses are housed in two garages located at 3201 West Copans Road, Pompano Beach, Florida, 33069 (Copans Garage), and 5440 Ravenswood Road, Dania Beach, Florida, 33312 (Ravenswood Garage). Approximately two hundred and fifty-five (255) buses are stored nightly at the Copans Garage and one-hundred and sixty (160) buses at the Ravenswood Garage. The number of buses stored at each garage is subject to change during the term of the contract.

2.2. During the term of the contract, BCT will acquire new buses or non-revenue vehicles requiring initial treatment. These new buses and vehicles will replace retired buses and vehicles and will result in little or no net increase in total, but initial treatment may be required.

3. CONTRACTOR QUALIFICATIONS:

The following minimum qualifications are required to be deemed minimally qualified. The contractor shall provide supporting documentation with bid response or within three (3) days of the County’s request.

3.1. The Contractor shall maintain all licenses, certifications, registrations, and permits required by the State of Florida and applicable local, state, and federal regulatory agencies to perform the services specified herein for the duration of this contract.

3.2. Contractor must possess a valid license from the State of Florida to perform pest control services and have certified employees (technicians and/or applicators). If the Contractor's employee is performing activities that do not involve pesticides, that individual does not need to hold a license but must be under the supervision of a licensed service representative.

Page | 2

3.3. The Contractor shall have a minimum of three (3) years of experience providing commercial pest control services of a similar nature and scope. Experience providing services to public transportation agencies, transit authorities, fleet operators, or similarly sized institutional customers of the approximate size and services of a similar type to Broward County Transit is preferred. Information shall include, but not be limited to, the contact information of the customer, the approximate number of vehicles, and the type and frequency of services performed.

3.4. The Contractor shall provide proof with its bid response or within three (3) days of the County’s request of the existence of quality, training, and safety programs including but not limited to the following below. Failure to provide the required documentation within the specified timeframe may result in the Contractor being deemed non-responsive/non-responsible, as applicable under County procurement procedures.

3.4.1. Quality Control Program

3.4.2. Technician Training Program.

3.4.3. Written Hazard Communication program in accordance with Occupational Safety and

Health Administration (OSHA) Standard 29 CFR 1910.1200, Hazard Communication.

4. CONTRACTOR RESPONSIBILITIES:

4.1. The Contractor shall furnish all labor, materials, insecticides, pesticides, disinfectants, chemicals, supplies, equipment, vehicles and/or transportation, and supervision required to perform services. The Contractor shall have a supervisor present at all locations while work is being performed. The supervisor shall conduct inspections of work to ensure service is performed to standards.

4.2. The Contractor will provide assessment, evaluation, monitoring, recommendations, and pest management services. BCT will provide one (1) orientation class to the Contractor and personnel covering bus/vehicle safety in the yard, general garage operation, and an introduction to BCT personnel.

4.3. The Contractor shall use only products, materials, equipment, and application methods that are legally authorized for the intended use and shall comply with all applicable federal, state, and local laws, regulations, pesticide labeling requirements, and regulatory requirements.

4.4. The Contractor shall provide effective and positive treatment for the eradication of pests and shall perform services in various working environments consisting of, but not limited to, exposure to all weather conditions including intense heat, rain, cold, and dust.

4.5. The Contractor shall conduct a thorough initial inspection of the fleet and parking area within thirty (30) working days after the effective date of the contract. The purpose of this inspection is to evaluate the pest management needs and to discuss these needs with BCT. The Contractor shall use this information to develop an Integrated Pest Management Program.

4.5.1. Integrated Pest Management Program

It is BCT’s intent to start an Integrated Pest Management (IPM) program. This program will involve regular monitoring, spot treatments as indicated by monitoring, crack and crevice

Page | 3 treatments using non-volatile bait and gel products, Insect Growth Regulators (IGRs), and spraying when necessary. The IPM program shall also consist of the following:

4.5.1.1. Identification of problem areas in and around the buses (including out of service and spare buses), and non-revenue vehicles.

4.5.1.2. Proposed methods for pest suppression, including labels and Safety Data Sheets

(SDS) for all pesticides to be used. In accordance with Broward County’s Risk Management HazCom program, Contractors proposing to use chemicals for a specific project must submit the SDS and sample product labels/or photocopy of the label with the submittal package. These documents, along with the Chemical Product Review form, will be sent to Risk Management for review within ten (10) business days of the expected start date of the project. The County reserves the right to reject a pesticide and to suggest alternates.

4.5.1.3. Any new chemical use that is proposed during this contract must be accompanied by documentation that justifies the need and provides SDS containing health and environmental effects data for evaluation by BCT. Upon receipt, BCT will accept or reject the use of any new chemical within five (5) days. If rejected, the Contractor shall have ten (10) days to submit a revised plan. Upon acceptance, the Contractor shall begin using the new chemical on the next scheduled treatment or emergency service call.

4.5.1.4. A list of brand names of insect trapping devices, pest monitoring devices, and any other control devices or equipment shall also be included. BCT must approve the selected methods and materials, and BCT reserves the right to reject selected methods and materials and to suggest alternates.

4.5.1.5. Complete, inspection-based written evaluations that identify the presence of existing and/or reasonably potential pest populations and responsive pest management strategies, including preventative maintenance and sanitation measures. The Contractor shall notify BCT prior to conducting regular monitoring and maintenance visits at sites with a history of pest populations exceeding an acceptable threshold, respond to emergency calls, and advise of the available strategies for management with an emphasis on long-term, and preventative measures. The Contractor will be responsible for informing BCT of the need for maintenance, sanitation, or pesticide application.

4.5.1.6. The treatment and monitoring service schedule for each garage. A bus inventory list record (including out of service and spare buses) with all locations of proposed treatments and schedules for bait application must be kept for each location. This record shall include all past applications, quantities, chemical types, monitoring results, and identification of practices that are contributing to pest infestations. This will be used for identifying problems that may need additional control and methods.

4.5.1.7. A plan to meet restrictions of special safety precautions or other constraints required by BCT, including emergency and special service requests. For such requests, the following information will need to be provided: up to date contact information (regular hours and after hours); names of personnel handling BCT account; and radio dispatched service.

4.5.1.8. The IPM will be submitted to BCT within ten (10) days after the initial inspection of the fleet. Upon receipt of the IPM, BCT will accept or reject the IPM within ten (10) days. If revisions are required, the Contractor shall have ten (10) working days to

Page | 4 submit a revised plan. Upon acceptance, the Contractor shall initiate service within five (5) working days.

4.6. The Contractor shall be responsible to carry out work according to the accepted detailed

Integrated Pest Management Plan and schedules developed for the fleet.

4.7. The Contractor shall be responsible for coordination with BCT prior to each visit. The purpose of the coordination is to review the Plan and schedule and to receive information on problem areas needing corrective action.

4.8. Pest control service activities must not interfere with BCT’s daily operations. BCT reserves the right to add, remove or modify the service times and frequency per location, as necessary.

5. SERVICE REQUIREMENTS:

Pest control services will be performed on BCT buses and vehicles, including out of service and spare buses. BCT reserves the right to increase or decrease the total frequencies, quantities, and vehicles as needed.

5.1. Treatment Areas:

Each location includes but is not limited to the areas listed below.

5.1.1. BCT Buses

5.1.1.1. Approximately 415 Buses ranging from 40-60ft in length.

5.1.2. BCT Non-Revenue Vehicles

5.1.2.1. Approximately 60 vehicles.

5.2. Service Frequency:

5.2.1. Buses (including out-of-service and spare buses) and non-revenue vehicles at each garage shall be treated for roaches and other target pests/rodents as determined by BCT and the Contractor no less than once a month if under control.

5.2.2. Services shall be provided during the 1st five business days of each month. Services shall be scheduled by electronic mail (e-mail) with the superintendents or designee at each location. BCT personnel emails will be provided upon award. Services will be performed Monday through Thursday between 12:01 AM – 4:00 AM when the buses are parked for the night. BCT shall designate mechanic(s) to provide assistance to open transit vehicles harborage areas for pest control service applications.

5.2.3. BCT reserves the right to adjust the day(s) and/or time(s) services shall be provided or to expand, reduce or modify the locations of service based upon the needs of the County. In the event, more frequent pest control services are administered by the Contractor in order to maintain/control further pest infestation; there will be no additional cost to the County.

5.2.4. Contractor shall provide a list of all Transit vehicles needing additional treatment within three (3) business days after the initial treatment. The list shall be provided to the BCT Contract Administrator or designee. BCT shall provide a mechanic to assist the technician with applying pest control treatments to inaccessible areas.

Page | 5

5.3. Re-treatment Services:

5.3.1. Contractor is required to respond within one (1) hour of notification by email and telephone from the Maintenance Superintendent or designee. Contractor shall dispatch the technician to perform re-treatment at no additional cost within 4 hours of notification. BCT Maintenance Superintendent or designee shall provide a mechanic to disassemble hard to reach compartments for maximum pest control treatment when standard monthly services do not provide eradication/suppression of pests.

5.4. Vehicle Services per Visit:

5.4.1. Service days and times must be carefully coordinated with Maintenance Superintendent or designee by e-mail. Failure to coordinate these activities will require additional visits at the Contractor’s expense. It is the responsibility of the Contractor to schedule the services in the most efficient manner.

5.4.2. Upon arrival at each garage, the Contractor shall report to the Maintenance Superintendent or Supervisor in charge. Upon completion of the service, the Contractor shall again report to the Maintenance Superintendent or Supervisor to provide a status of work completed, problems, and a summary of remaining work. The work performed by the Contractor must be documented and approved.

6. TREATMENTS:

6.1. PEST CONTROL TREATMENTS:

6.1.1. Pesticide Products and Use:

6.1.1.1. All products used by the Contractor must be commercial quality, be registered with the Environmental Protection Agency, and conform to any Federal, state, and local restrictions on pesticide use.

6.1.1.2. Contractor shall only apply pesticides identified in the IPM. All pesticides must be reviewed and approved by Broward County Transportation Safety and Security Division.

6.1.1.3. Transport, handling, and use of all pesticides shall be in strict accordance with the manufacturer's label instructions and all applicable Federal, State, and local laws and regulations, including OSHA.

6.1.1.4. Effective pest control service measures, using commercial-quality applications via an assortment of deployment methods, shall consist of the following, but not be limited to:

6.1.1.4.1. Gel baits and/or dusting (liquid insecticide) in cracks and crevices (in which the application of pesticide is visibly difficult to detect) – performed as needed (e.g., MaxForce Gel for cockroaches).

6.1.1.4.2. Bait stations or roach pheromone traps with replacement occurring as needed.

Bait stations must be placed in non-visual areas to the customer and must have a date marking system to easily identify replacement dates.

6.1.1.4.3. Using Insect Growth Regulators (IGR’s).

Page | 6

6.1.1.4.4. Spray application of residual insecticide treatment.

6.1.1.4.5. Vacuuming any existing bugs, nests, or eggs when performing services.

6.1.1.4.6. Freezing techniques.

6.1.1.5. Application of insecticides to exposed surfaces should be restricted to unique situations where there are no alternative measures. When pesticide use is necessary, the Contractor shall employ the least hazardous material, the most precise application technique, and the minimum quantity of pesticide necessary to achieve control.

Attributes of the least hazardous pesticides include low acute and chronic toxicity, low volatility or mobility, and rapid biodegradability (for space sprays). The Contractor shall minimize the use of synthetic organic pesticides and liquid formulations of pesticides wherever possible.

6.1.1.6. A treatment sticker shall be placed in an agreed upon location of treated areas with the date of service, time, and date of application of any hazardous chemicals, and the wait time to prevent hazardous exposure to BCT employees, passengers, and guests.

6.1.1.7. If it is agreed that a pesticide can be delivered by sprayed application, the Contractor shall provide BCT the name of the pesticide (both chemical and brand name). In cooperation with BCT, the Contractor shall develop site-specific treatment action levels for each pest species at each site.

6.1.1.8. Liquid material must not be sprayed directly on the fareboxes.

6.1.2. Bait Placement:

All bait and monitoring devices shall be placed only in locations approved by BCT and in a manner that does not interfere with vehicle operation, maintenance, passenger safety, emergency equipment, electrical systems, ventilation systems, or manufacturer requirements.

6.1.2.1. Bait placement locations shall include, but not be limited to:

6.1.2.1.1. Under driver’s seat (including driver seat cushion) and surrounding area.

6.1.2.1.2. Accessible compartments above and around the driver’s area.

6.1.2.1.3. Wheelchair ramps/lifts and surrounding area.

6.1.2.1.4. Under the lower edges of the instrument panel.

6.1.2.1.5. In the cracks and crevices around lighting and advertising fixtures.

6.1.2.1.6. Under passenger seats, especially rear seats which provide access to the engine area.

6.1.2.1.7. Selectively around heaters and vents, specifically away from air currents.

6.1.2.1.8. In and around swivel sections of articulated buses.

6.1.2.1.9. Edge of, in cracks and crevices of wall panels.

6.1.2.1.10. Seat voids, around electrical fittings, and equipment.

6.1.2.1.11. Crevices around baseboards and door voids.

6.1.2.1.12. Emergency windows area.

6.1.2.1.13. Radio compartment box

6.1.3. Monitoring traps:

6.1.3.1. Contractor shall place traps in locations out of public view but easily accessible to the

Contractor and BCT maintenance personnel. Traps will be used to detect the

Page | 7 presence or absence of insect infestations to facilitate accurate identification, estimate population sizes and the need for callbacks.

6.1.3.2. Contractor will provide monthly monitoring and/or written reports for recording trap catches and other observations. Additionally, traps with zero catches must be moved to different locations periodically to determine the decline/absence of pest populations.

6.2. ADDITIONAL SERVICES:

The following additional pest and rodent control services require special service requirements/treatments and will only be used on an as-needed basis. It is the Contractor’s responsibility to advise of alternative methods and continually review treatment methods and applications with the Building Manager and make recommendations accordingly. The Contractor and/or subcontractor must hold the proper official certification to perform these services.

6.2.1. Fogging, Fumigation :

6.2.1.1. Upon request, the Contractor shall perform fogging and/or fumigation services for more serious cases of infestation to ensure eradication.

6.2.2. Bed Bug Treatment:

6.2.2.1. The Contractor shall provide an effective thermal treatment method specifically designed for bed bug eradication. The Contractor shall monitor temperatures at representative locations throughout the treatment area using calibrated temperature sensors and maintain temperatures and exposure times sufficient to achieve effective control of bed bugs and eggs, in accordance with the equipment manufacturer's specifications and applicable industry standards.

7. CONTRACTOR REQUIREMENTS:

7.1. The Contractor and all personnel shall maintain the required licenses to perform pest control services throughout the duration of the contract agreement. Failure to maintain the required licenses shall result in termination of the contract.

7.1.1. All Technicians and Applicators must be trained, qualified, and certified to conduct commercial pest control work.

7.1.2. A copy of all training certificates for all personnel assigned to this contract shall be provided to BCT.

7.2. The Contractor, all personnel, and subcontractors must wear a uniform clearly marked with the company name, logo, or I.D. badge, etc.; as well as personal protective equipment required by the pesticide label, SDS, OSHA, and applicable regulations for the safe performance of the work.

The Contract shall also wear a high visibility reflective vest while on the property.

7.3. Restrictions:

7.3.1. No unauthorized personnel or visitors will be permitted to enter BCT property without permission.

Page | 8

7.3.2. No personal radios, earbuds, headphones, Bluetooth devices, or other hearing-impairing devices shall be allowed at any time.

7.3.3. At no time will the Contractor, Contractor’s personnel, or subcontractors be permitted to start or operate any BCT bus or vehicle.

7.4. Contractor Vehicles:

7.4.1. The Contractor’s company vehicles shall be distinctly labeled with the company name; and shall only be parked in the spaces identified and marked “Contractor/Vendor Parking.”

Parking is not permitted in bus lanes.

7.5. Record Keeping:

7.5.1. The Contractor shall maintain electronic service records accessible to BCT and, when requested provide hard copies or electronic reports of all transit vehicles serviced under this contract. These records shall be kept at each garage and maintained after each visit by the Contractor. At a minimum, each hard copy or electronic report shall contain the following:

7.5.1.1. A copy of the IPM and service schedule for each location.

7.5.1.2. A copy of the services performed on each bus, non-revenue vehicle, and BCT location, including:

7.5.1.2.1. The date, arrival, and departure time of the Contractor’s personnel performing the service.

7.5.1.2.2. The treatment methods used.

7.5.1.2.3. The location of pest and rodent sightings.

7.5.1.2.4. The results of treatments.

7.5.1.2.5. Emergency services or special requests performed.

7.5.2. All record-keeping information on pesticide applications are required by all applicable regulations and statutes, including a copy of the current label and EPA registration number for each pesticide used and the Safety Data Sheet.

7.6. Safety and Health:

7.6.1. All services shall comply with all applicable federal, state, county, and municipal safety, and health requirements. Where there is a conflict between applicable regulations, the most stringent will apply. The Contractor shall assume full responsibility and liability for compliance with all applicable regulations pertaining to the health and safety of personnel during the execution of work, including but not limited to Occupational Safety and Health Administration Standard (OSHA) 29 CFR 1910.1200, Hazard Communication.

7.6.2. The Contractor shall observe all safety precautions throughout the performance of this contract and determine and provide additional personal protective equipment required for the safe performance of this work. Personal protective equipment and safe work practices recommended by the manufacturer via the SDS for each hazardous chemical/product used shall be followed by all contractor’s employees and enforced by all contractor’s supervisors.

Page | 9

All vehicles used by the Contractor shall be identified in accordance with any state and local regulations.

7.6.3. The Contractor shall take all necessary precautions to ensure public and employee safety and all necessary steps to ensure the containment of the pesticide to the site of application.

The Contractor shall follow procedures for notification and timing of such pesticide applications as detailed in this contract. The Contractor shall not apply any pesticide product that has not been reviewed and approved by Broward County Transportation Safety and Security Division.

7.6.4. The Contractor personnel and subcontractors shall use all materials in accordance with the label and manufacturer’s instructions.

7.6.5. Contractor may not store or dispose of any pesticide containers, full or empty, inside or on the grounds of any BCT facility. Under no circumstances may a chemical be applied in the immediate presence of a human being who is not involved in the application process.

7.6.6. Pesticide applications shall be based on documented pest activity, monitoring results, inspection findings, or other conditions supporting the need for treatment, and shall be performed in accordance with the approved IPM and applicable pesticide labeling requirements.

8. QUALITY CONTROL PROGRAM:

8.1. Contractor shall establish a complete quality control program to assure the requirements of this contract are provided as specified.

8.2. BCT reserves the right to evaluate the progress of this contract in terms of effectiveness and safety, and to require rectification if necessary. The Contractor shall take prompt action to correct/rectify all identified deficiencies.

8.3. The Contractor shall submit a copy of the Quality Control Program plan to BCT as part of the

IPM. The Quality Control Program shall include, but not be limited to the following:

8.3.1. The contact information of the employee responsible for the Quality Control Program.

8.3.2. An inspection system covering all the services stated in this contract, including a checklist for inspecting contract performance during regularly scheduled or unscheduled inspections. The checklist shall include every area of the operation serviced by the Contractor, as well as every task required to be performed. This checklist must be submitted with each request for payment.

8.3.3. A system for identifying and correcting deficiencies before the level of performance becomes unacceptable, i.e., through the use and inspection of trapping devices. The Contractor shall take prompt action to correct all identified deficiencies, including scheduling a re-inspection.

8.3.4. An electronic file of all inspections conducted by the Contractor, including corrective actions taken. This documentation shall be maintained locally and made available to BCT at any time during the term of the contract; and at a minimum of one year after the termination of

Page | 10 the contract. Copies of inspections, regular service calls, and periodic maintenance reports shall be given to BCT on a monthly basis.

9. WARRANTY AND RE-TREATMENT:

9.1. The Contractor shall warranty pest control treatments for thirty (30) days from the date of the last service. If an infestation—defined as the observation of one or more pests or rodents—recurs within this 30-day window, re-treatment will be provided at no additional charge within forty-eight

(48) hours of notification.

10. ADDITION/DELETION:

10.1. Additional buses, non-revenue vehicles, and/or new locations may be added to this contract by an amendment, at the County’s option, and with the agreement of the Contractor. Additional buses, non-revenue vehicles, or locations shall be priced using the applicable unit prices established in the Contractor's bid, where such unit prices exist. Where no applicable unit price exists, the County may negotiate an appropriate price consistent with the Contract and applicable County procurement requirements. Buses and/or locations may be deleted (in a similar manner) if service(s) is no longer required.

11. INVOICING AND PAYMENT:

11.1. The Contractor must submit a legible copy of the invoice before payment(s) can be made. At a minimum, the invoice must provide the following information:

11.1.1. Company Name, Address and Contact

11.1.2. County Bill to Name and Contact Information

11.1.3. County Purchase Order Number

11.1.4. Invoice Number and Date

11.1.5. Date of Service

11.1.6. Quantity

11.1.7. Description of Service

11.1.8. Pricing Per Unit

11.1.9. Total Amount Due

11.1.10. Service Report including Service Location, Number of Vehicles Serviced, Vehicle

Identification Numbers, if applicable, and Any Authorized Additional Services

11.2. Problems regarding billing or invoicing shall be directed to the Using Agency as listed on the Purchase Order.

11.3. Invoices for Final Payment shall be clearly marked as “FINAL” and submitted when all work requirements have been completed and no further charges are to be incurred under the Contract.

In no event shall any invoice be submitted later than sixty (60) calendar days from the Contract termination date or expiration date unless there is a pending dispute.

END OF SPECIFICATIONS AND REQUIREMENTS

File details come from the government source that posted it. Updated .