Boat_Salient_Characteristics_V4.xlsx
XLSX spreadsheet 21 KB Posted
- Attached to
- Tyndall AFB - CUSTOM BOAT Federal contract opportunity
- Solicitation number
- FA481923QA100
About this file
This document outlines the salient characteristics for a 32-foot center console boat with twin outboard engines to be procured by Tyndall Air Force Base under solicitation number FA481923QA100. Key specifications of the boat include a 24-degree deadrise hull, 114-inch chine beam, twin 400-500 horsepower outboard engines, a 9-foot walkaround cabin with sliding doors, seating for an operator, navigator and passengers, a navigation package with GPS and radar, and electrical systems including batteries, inverters, bilge pumps and lighting. The boat is also specified to have towing and mooring equipment, rigging, safety gear and paint in muted colors.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Q and A FA481923QA100.pdf | ||
| FA481923QA100 - Combo RFQ.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Table 1
| Boat w/ Walk Around Pilothouse (TWIN Outboard) | |||
| CENTER LENGTH: | 32' | ||
| DEADRISE: | 24 degrees | ||
| CHINE BEAM: | 114 | ||
| BEAM: | 10' | ||
| SIDE HEIGHT | 44" | ||
| 2 year limited Government / Commercial hull warranty for this contract. | |||
| Vessel to be built to USCG and ABYC Standards unless otherwise noted | |||
| ENGINES | |||
| MOTOR | 2024 | 400-500 horsepower | |
| MOTOR | 2024 | 400-500 horsepower | |
| MOTOR | |||
| MOTOR | |||
| ENGINE INTEGRATED SYSTEMS | |||
| PROPELLERS - STAINLESS props, (1-standard rotation & 1-counter rotation) appropriate for selected engine | |||
| Shift / Throttle Control: Digitial Throttle & Shift (DTS), DUAL BINNACLE, Digital Electronic Control (DEC) | |||
| Ignition: Twin Engine Key Switch with emergency stop lanyard | |||
| Battery Isolator leads - charge leads for each outboard to replenish batteries while underway. | |||
| STEERING AND FUEL SYSTEMS | |||
| STEERING SYSTEM: DUAL RAM, hydraulic steering w/stainless steering wheel | |||
| Trim Tabs: Aluminum Trim Tab (12v) Trim Tabs w/ Trim position indicator switch panel located at dash where easily reached and operated. Size of trim tabs should accurately reflect boat size and weight. | |||
| Fuel Tank: Minimum of 250 gallon tank with appropriate interior tank baffles, neoprene rubber and seaboard isolation mounting beds and brackets to prevent tank movement while underway. Tank installation and components must comply with ABYC and EPA standards in effect at time of manufacture. | |||
| Fuel / Water separators: At least 2 fuel filters with low point drain & clear sight bowls. | |||
| WELDED FEATURES | |||
| Offshore Bracket for TWIN 400 hp. outboard engines: At least 1 lift-out inspection hatch located / centered between outboard engines. | |||
| Self-bailing Decks: Non skid surface on deck. Through transom deck drains w/ Mechanical "flapper" style non-return valves | |||
| Topside (CENTERED) At least 1 Transom Storage compartment - Aluminum "SHOEBOX LID" at rear cowling with oversized drains to run overboard, out transom | |||
| RAILS: 1.25" Sched. 40, approx. 6" from gunwale/ transom surface--Positioning: TRANSOM RAILS: rails over the transom, AMIDSHIP RAILS: rails alongside cabin area, BOW RAILS: rails FORWARD OF cabin area. | |||
| Rub Rails - (2 per side, Port & Starboard); welded aluminum rub rails, extend from transom to approximately curve of bow on hull sides for dock / pier protection. | |||
| BOARDING DOOR (SIDE / STARBOARD), Hinged, Inboard swinging boarding door/ should provide easy exit and entry for divers/ Latches closed. | |||
| Tow Bitt AFT - SUGGESTED : 3" Schedule 80 welded aluminum tow post with single (solid) cross-pin and welded cap.-- NEEDED: capability to tow light to medium loads, tow bit should adjust up to 5' tall off of the deck of the boat.-- USES: parachute drags, this must be at a higher angle from the surface of the water and support draggin one person at a time. (this is not parasailing). Equivalent or lesser vessel tow. | |||
| CLEATS - At least 8 10" Cast aluminum, open base cleats. (welded) w/ backing plates or similar. | |||
| CABIN / CONSOLE | |||
| WALK AROUND CABIN - 9' Cabin Length (Approx.length.) 1-PIECE WINDSHIELD, Full 360 "Walk Around" cabin with 1-sliding door starboard next to Operator and 1- sliding door located next to navigator / companion poistion. | |||
| Shortened Cuddy Trunk, forward of winshield to allow for extra gear storage, rigging components. | |||
| Roof drain system - guttered drain system removable drain covers and channel drains that route water to either channels or railing and onto gunwales/overboard. | |||
| Aft Cabin overhang to extend approx. 30" | |||
| OVERHEAD ELECTRONICS BOX: Electronics box overhead / forward cabin. Sized to fit engine display, switch panel, and accessories overhead. Port side above helm to be left open. | |||
| Cabin side railing above windows - angle cut stanchions so they are tapered downwards to be easier to grab. | |||
| At least 2 Roof top vent hatches – located over operator and navigator positions | |||
| UPHOLSTERY AND CANVAS | |||
| Operator / Captain's seat : shock mitigating seat with height adjust, swivel and fore/aft slide. Installed on seat riser / box. | |||
| Navigator / Companion seat: shock mitigating seat with height adjust and fore/aft adjustment. Installed on seat riser for proper seat height. | |||
| Aft Bench seats (BOTH PORT AND STARBOARD SIDES) w/ cushioned lids and storage beneath - (Starboad side cabin as space/length allows aft of small work station/storage cabinet) | |||
| OUTFITTING - RIGGING | |||
| Anchor / Rhode Kit: 300' of anchor line w/ 20' of anchor chain. Includes swivels and is spliced and ready for use. | |||
| Fire Extinguisher: 340 Dry Chemical Extinguisher - Class 3-A:40-B:C 1 mounted behind STBD aft seat box 1 mounted fwd in/near cuddy | |||
| Fire Extinguisher: 110 twin pack, mounted behind STBD aft seat box 1 mounted fwd in/near cuddy | |||
| OUTFITTING - ELECTRICAL | |||
| USCG approved Navigation / Lighting package (LED): Navigation and Anchor lights (LED) - Anchor light to be mounted on aft section of light mast switched at dash | |||
| 12v Electrical panel and ALL 12v wiring systems for Vessel. ALL VESSEL WIRING TO COMPLY WITH ABYC STANDARDS. | |||
| Windshield wipers (1-per side, w/ independent motors). Wipers to have automotive style washer fluid system and holding tank. Wipers controlled by Independent wiper switches. | |||
| HORN - Stainless, (12v) dual trumpet horn installed on cabin roof. Momentary switch at dash. | |||
| • BILGE PUMP(s): (Qty. 2) 2000 GPH bilge pumps with auto switch. (3-way switch located on dash; ON / OFF / Auto). | |||
| • BILGE PUMP(s): (Qty. 2) 3700 GPH bilge pumps with auto switch. (3-way switch located on dash; ON / OFF / Auto). | |||
| Cabin Fans: (Qty. 3) 3-speed cabin fans located in forward cabin corners & 1- located aft up ceiling corner. | |||
| BATTERIES: (Qty. 2) Deep cycle marine batteries w/ breaker switch for outboards, and (Qty. 1) Deep cycle battery for "house" battery system. | |||
| SHORE POWER: 30 amp with cord set, Magnum 2000w Inverter & 4 Bank system with battery charger: Includes: 1 ea. 120v AC panel, ELCI CB-DP 30 amp, GFCI 15 amp recpt, 15 amp recpt. Guest 30 amp galvanic isolator, inlet 30 amp 125v & cord set 4 Bank battery charger & 1 Additional battery (house battery) | |||
| Raw Water Washdown system: (spigot) Located aft / Port corner w/ QD fitting. Includes Coil hose w/ trigger nozzle. | |||
| Exterior Courtesy Lights: At least 8 floor lights to illuminate deck floor at night / morning operations | |||
| Interior Courtesy Lights: At least 6 Red LED, oblong lights installed on port & starboard sides of center aiselway and |
(2) on dash bulkhead.
| Flood Lights: At Least 4 (18w) LED floodlights, installed (aft facing and forward facing) forward lights switched together and aft lights switched together. | |
| ELECTRONICS & NAVIGATION SYSTEMS | |
| Compass: Combination Dial compass installed in dash area where it will not interfere with electronics | |
| Main Display GPS/SONAR: At least 1 chart plotter, GPS, radar, autopilot and video. Multifunction color display, touch screen with charts for East Coast / Florida area |
a. Includes: remote GPS antenna. INSTALLED (FLUSHMOUNTED, in dash where easily seen)
| Radar: CHIRP Pulse compression radar, collision avoidance, true trails, automatic target acquisition and tracking, doppler / dome radar range 24nm. | ||
| VHF RADIOS: (Qty. 2) fixed mount 25W - Black VHF w/NMEA2000 intergration w/DSC Hailer HORN: (Includes: VHF Antenna heavy duty construction with center-fed 1/2-wave coaxial sleeve - 4 ft, 3 dB) | ||
| Loudspeaker: (100w) loudspeaker all-weather nylon composite housing with front loaded, powder coated speaker driver, 112 waterproof amp, weatherproof siren control/switch panel. | ||
| PAINT | ||
| Interior: | Muted colors | |
| Exterior top: | No exterior side paint | |
| Exterior top side: | No exterior side paint | |
| Cabin exterior: | Muted colors | |
| Cabin interior: | Muted colors | |
| Cuddy: | Muted colors | |
| Non-skid surfaces: | Charcoal non-skid on all walking surfaces | |
| ***OTHER (SPARES, TESTING, CLEANING, CERTIFICATIONS, DRAWINGS, DELIVERY) |
File details come from the government source that posted it. Updated .