Bldgs 320 321 Exterior.pdf

PDF 23 MB Posted Aug 16, 2023

Attached to: PSXE232024 Repair Exteriors Base wide
Solicitation number: W50S98-23-B-0005
Issued by: Department of the Army Tennessee Army National Guard

About this file

Written by GovTribe AI · Dec 21, 2023

This document provides details on a federal solicitation from the Department of the Army Tennessee Army National Guard. Solicitation number W50S98-23-B-0005 seeks bids to repair the exteriors of multiple buildings base-wide, as identified in the 23MB PDF file titled "Bldgs 320 321 Exterior.pdf" that describes the required work. Interested contractors must submit bids by the date specified to be considered for an award to provide repair services for the building exteriors across the entire base. The opportunity is designated for all contractors as there are no set-aside provisions.

View the file

Other files

File	Type	Posted
OF_1419 PSXE232024.pdf	PDF	Sep 20, 2023
Sign in Sheet.pdf	PDF	Sep 15, 2023
OF_1419 PSXE232024.pdf	PDF	Sep 15, 2023
Site Visit Sign In Sheet.pdf	PDF	Aug 25, 2023
W50S98-23-B-00050001.pdf	PDF	Aug 25, 2023
Pre-Bid Slides 23B0005.pdf	PDF	Aug 25, 2023
Bldg 125 Exterior Envelope.pdf	PDF	Aug 16, 2023
SOW PSXE232024 Repair Exteriors Basewide.pdf	PDF	Aug 16, 2023
Bldg 125 Exterior Spec.pdf	PDF	Aug 16, 2023
W50S98-23-B-0005.pdf	PDF	Aug 16, 2023
Bldg 1812 Stairs.pdf	PDF	Aug 16, 2023

Show all 11

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

REPAIR BUILDING 320 AND 321 EXTERIOR

PSXE222011

TENNESSEE AIR NATIONAL GUARD

134TH AIR REFUELING WING

MAY 5th 2023

LOCATION MAP

DRAWING LIST

C0.0 COVER WITH DRAWING LIST AND LOCATION MAP

C2.1 BUILDING 320 EXTERIOR ELEVATIONS AND LEGEND

C2.2 BUILDING 320 EXTERIOR ELEVATIONS

C2.3 BUILDING 320 EXTERIOR ELEVATIONS

C2.4 BUILDING 320 EXTERIOR ELEVATIONS

C2.5 BUILDING 321 EXTERIOR ELEVATIONS

C2.6 BUILDING 321 EXTERIOR ELEVATIONS

C2.7 BUILDING 321 EXTERIOR ELEVATIONS

C2.8 SPECIFICATIONS

240 West Bessemer St. Alcoa, TN. 37701 Ph. (865) 980-3500

AutoCAD SHX Text N.T.S.

AutoCAD SHX Text

PELLISIPPI PKY

AutoCAD SHX Text

TOPSIDE RD

AutoCAD SHX Text

MARYVILLE PIKE

AutoCAD SHX Text

LOUISVILLE

AutoCAD SHX Text

MENTOR

AutoCAD SHX Text

AIR BASE RD

AutoCAD SHX Text

CALLAHAN RD

AutoCAD SHX Text

LOUISVILLE RD

AutoCAD SHX Text

W HUNT RD

AutoCAD SHX Text

W HUNT RD

AutoCAD SHX Text

ALCOA HWY

AutoCAD SHX Text

CUSICK RD

AutoCAD SHX Text

E HUNT RD

AutoCAD SHX Text

E BROADWAY AVE

AutoCAD SHX Text McARTHUR RD

AutoCAD SHX Text

MARYVILLE

AutoCAD SHX Text

METROPOLITAN

AutoCAD SHX Text

KNOXVILLE

AutoCAD SHX Text

AIRPORT AUTHORITY

AutoCAD SHX Text

FORT

AutoCAD SHX Text

LOUDON

AutoCAD SHX Text

LAKE

AutoCAD SHX Text

LIBERTY ST.

AutoCAD SHX Text

TENNESSEE AIR NATIONAL GUARD

AutoCAD SHX Text

BRISCOE DR.

AutoCAD SHX Text

PROJECT SITE

AutoCAD SHX Text

FRONT GATE ENTRANCE TO TANG BASE

14141414

SLIDE GATE

134 CIVIL ENGINEER SQUADRON TH

(TYPICAL)

ELEVATION LEGEND

TEXTURED MASONRY UNIT (PAINT)

EXISTING BRICK

CONCRETE PAINTED DOVE GRAY

ATFP ALUM. STOREFRONT

PAINTED SCORED BLOCK VENEER

PAINTED STEEL WINDOW / DOOR FRAME

CONCRETE PAINTED SMOKEY GRAY

5.5.23

PSXE222011

4t h A ir R ef u el in g W in g

R ep ai r

B ld g an d

E xt er io r

5.5.23

PSXE222011

4t h A ir R ef u el in g W in g

R ep ai r

B ld g an d

E xt er io r

C2.1

G . 3

R E

O N

CWH

CJS

ALL EXTERIOR PAINT TO BE HIGH PERFORMANCE COATINGS,

SEE SPECIFICATIONS.

COLOR DOVE GRAY - RGB 189,187,183 FINAL COLOR AS SELECTED

BY COR.

COLOR SMOKEY GRAY - RGB 88, 89, 91 FINAL COLOR AS

SELECTED

BY COR.

NOTE:

CONTRACTOR SHALL REMOVE/REPLACE ALL EXTERIOR CAULK

BUILDINGS 320/321 WHETHER INDICATED OR NOT. COLOR AS

SELECTED BY COR.

EXTERIOR PAINT SCHEDULE

SCALE 1/8"=1-0"

1BUILDING 320- FRONT ELEVATION

SEE SHEET C2.2 FOR ENLARGED PLAN THIS AREA

M A

T C

H L I N

H E

O R

T I N

U A

T I O

KEY NOTES:

1 RED LINE INDICATES EXISTING CAULK TO BE REMOVED BACK AS

FAR AS POSSIBLE AND RE-CAULK. SCRAPE CLEAN ALL EXPOSED

EDGES AND PREP SURFACE. (TYPICAL ALL EXTERIOR CAULKED

JOINTS.) (COLOR MATCH NEW CAULK) EXACT COLOR AS

SELECTED BY COR.

2 EXISTING PAINTED CONCRETE SURFACE. REMOVE ALL PAINT AND

POINT UP CONCRETE. APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. (SMOKEY GRAY)

3 EXISTING METAL DOOR. REMOVE EXISTING PAINT, REPAIR ANY

SURFACE DEFECTS OR RUSTED AREAS AS REQUIRED. (TREAT ANY

RUSTED AREAS WITH A COMPATIBLE RUST INHIBITOR) APPLY NEW

PRIMER, SEALANT BASE, AND TOP COAT PER SPECIFICATIONS. FOR

DOOR AND FRAME. (DO NOT PAINT DOOR HARDWARE, PROTECT

AND OR REMOVE AS REQUIRED, CLEAN AND REINSTALL AFTER NEW

PAINTWORK IS COMPLETED.) (SMOKEY GRAY)

4 EXISTING PAINTED CONCRETE SURFACE. REMOVE ALL PAINT AND

POINT UP CONCRETE. APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. (DOVE GRAY)

5 EXISTING METAL WINDOW FRAME. REPAIR ANY SURFACE DEFECTS

OR RUSTED AREAS AS REQUIRED. (TREAT ANY RUSTED AREAS WITH

A COMPATIBLE RUST INHIBITOR) APPLY NEW, SEALANT BASE, AND

TOP COAT PER SPECIFICATIONS. (SMOKEY GRAY)

6 EXISTING ROLL-UP DOOR, CLEAN AND PROTECT DOOR FINISH

DURING ALL WORK. REPAIR AND REFINISH METAL FRAME,

(SAME AS NOTE #5 ABOVE.)

7 EXISTING PAINTED SCORED CMU WALL. REMOVE ANY LOOSE

PAINT AND POINT UP MASONRY, APPLY NEW SEALANT BASE AND

TOP COAT AS REQUIRED. SEE SPECIFICATIONS. (DOVE GRAY)

8 EXISTING PAINTED EFIS WALL SURFACE. REPAIR ALL SURFACE

DEFECTS. PREPARE AND APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. REPAIR AREAS AROUND WALL

MOUNTED LIGHTS, SEE PICTURE, AND TAKE SPECIAL CARE TO

REPAIR DAMAGED AREAS. SEE PICTURES. (DOVE GRAY)

9 EXISTING PAINTED EFIS / METAL SOFFIT OVERHANG, REPAIR ALL

SURFACE DEFECTS. REPLACE EXISTING VENTILATED METAL PANELS

WITH NEW PRE-FINISHED POWDER COAT VENTILATED METAL PANELS.

(DOVE GRAY)

10 GREEN LINE INDICATES EXISTING PARAPET CAP TO REMAIN. CAULK

AND RESEAL ALL JOINTS.

11 EXISTING ALUMINUM ATFP STOREFRONT. CLEAN AND CAULK

SEAMS WHERE STOREFRONT MEETS SURROUNDING STRUCTURE.

12 EXISTING ALUMINUM WINDOW. CLEAN AND CAULKSEAMS WHERE

FRAME MEETS SURROUNDING STRUCTURE.

13 EXISTING PRE-FINISHED METAL SIDING TO REMAIN. CAULK SEAMS

WHERE SIDING MEETS SURROUNDING BRICK.

14 ALUMINUM LOUVER TO REMAIN. RE-CAULK AS REQUIRED.

15 EXISTING BRICKWORK TO REMAIN.

16 EXISTING TEXTURED BLOCK MASONRY TO REMAIN. CLEAN, AND

POINT UP MORTAR JOINTS AS REQUIRED. (INCLUDE 500 LF OF

RE-POINTING IN BASE BID.) APPLY NEW SEALANT BASE AND TOP

COAT. (SMOKEY GRAY)

17 STONE PLAQUE, PROTECT DURING PAINTING AND CLEAN. RE-CAULK.

18 EXISTING ROOF SCUPPER, REMOVE ALL LOOSE PAINT, APPLY NEW

SEALANT BASE AND TOP COAT (SMOKEY GRAY)

19 BLUE LINE INDICATES EXISTING PARAPET CAP TO BE REMOVED AND

REPLACED. (MATCH EXISTING) CAULK AND SEAL ALL JOINTS.

20 REPLACE EXISTING METAL DOOR 4'x7' x1

" NOMINAL. ROUGH

OPENING 48”X 84-3/4”. (FIELD VERIFY) REPLACE DOOR AND FRAME.

PROVIDE NEW HARDWARE TO MATCH EXISTING. PAINT DOOR AND

FRAME SMOKEY GRAY, SEE SPECIFICATIONS.

21 REPLACE EXISTING DOUBLE METAL DOOR 46x80 X1

" NOMINAL.

ROUGH OPENING 94”X 84-1/4”. (FIELD VERIFY) REPLACE DOOR AND

FRAME. PROVIDE NEW HARDWARE TO MATCH EXISTING. PAINT

DOOR AND FRAME SMOKEY GRAY SEE SPECIFICATIONS.

AutoCAD SHX Text

REVISIONS:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

PROJ. NO:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

SHEET NO.

AutoCAD SHX Text

AutoCAD SHX Text N

AutoCAD SHX Text M

AutoCAD SHX Text

AutoCAD SHX Text L

AutoCAD SHX Text K

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text G

AutoCAD SHX Text 240 West Bessemer St. Alcoa, TN. 37701

AutoCAD SHX Text

ph. 865 980 3500 fax. 865 980 3555

AutoCAD SHX Text

COR

AutoCAD SHX Text C:\USERS\CWHANEY\DESKTOP\320\SHEETS.DWG PLOTTED ON:May 23, 2023 3:26 PM BY:CRAIG HANEYPLOTTED ON:May 23, 2023 3:26 PM BY:CRAIG HANEYMay 23, 2023 3:26 PM BY:CRAIG HANEY3:26 PM BY:CRAIG HANEYBY:CRAIG HANEYCRAIG HANEY

AutoCAD SHX Text Louisville, Tennessee

AutoCAD SHX Text

REVISIONS:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

PROJ. NO:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

SHEET NO.

AutoCAD SHX Text

AutoCAD SHX Text N

AutoCAD SHX Text M

AutoCAD SHX Text

AutoCAD SHX Text L

AutoCAD SHX Text K

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text G

AutoCAD SHX Text 240 West Bessemer St. Alcoa, TN. 37701

AutoCAD SHX Text

ph. 865 980 3500 fax. 865 980 3555

AutoCAD SHX Text

COR

AutoCAD SHX Text Louisville, Tennessee

Louisville, Tennessee

SLIDE GATE SLIDE GATE

134 CIVIL ENGINEER SQUADRON TH

5.5.23

PSXE222011

4t h A ir R ef u el in g W in g

R ep ai r

B ld g an d

E xt er io r

5.5.23

PSXE222011

4t h A ir R ef u el in g W in g

R ep ai r

B ld g an d

E xt er io r

C2.2

G . 3

R E

O N

CWH

CJS

SCALE 3/8"=1-0"

2BUILDING 320- ENLARGED FRONT ELEVATION

M A

T C

H L I N

H E

T I N

U A

T I O

SCALE 1/8"=1-0"

1BUILDING 320- FRONT ELEVATION CONTINUATION

12"

1'-6"

8'-0"

NEW SIGN LETTERING 12" AND 8" 2 1/2" DEEP INVERTED CHANNEL

ALUMINUM LETTERS MOUNT 2" ABOVE SURFACE WITH STAINLESS STEEL

STAND-OFFS AS REQUIRED. BACKLIT LED. PROVIDE SHOP DRAWING FOR

ALL SIGN COMPONENTS. (ARIAL FONT)

(21' MAX INSTALLED WIDTH)

NEW CUSTOM INVERTED CHANNEL ALUMINUM ICON INSIGNIA 2 1/2" DEPTH

MOUNT 2" ABOVE SURFACE WITH STAINLESS STEEL STAND-OFFS AS

REQUIRED. BACKLIT LED. PROVIDE SHOP DRAWING FOR

ALL SIGN COMPONENTS. SEE SIGN CONNECTION DETAIL #3 SHEET C2.7

(TYPICAL)

EXISTING HANDRAIL IN GOOD CONDITION, REMOVE AND / OR

PROTECT DURING PAINT REMOVAL AND REPAINTING.

REMOVE ALL PAINT BOTH SIDES THIS BUILDING EXTENSION DOWN TO

CONCRETE AND REPAINT. (SMOKEY GRAY)

REMOVE ALL PAINT ON BALCONY LEVEL BOTH SIDES AND REPAINT

(SMOKEY GRAY) SEE PHOTOS BELOW

CLOSE OFF CENTER SCUPPER, WITH 4000 PSI GROUT, FINISH TO

MATCH EXISTING SURFACE. (PATCH EXISTING ROOF LINER ON BALCONY

SIDE AS REQUIRED.) CAREFULLY REMOVE AND REINSTALL DECKING

BOARDS AS NEEDED TO PATCH ROOF LINER.

BALCONY LEVEL (LOOKING OUT)

BALCONY LEVEL (LOOKING PLAN EAST)

(GOVERNMENT WILL SUPPLY CAD FILES TO SUCCESSFUL BIDDER)

KEY NOTES:

1 RED LINE INDICATES EXISTING CAULK TO BE REMOVED BACK AS

FAR AS POSSIBLE AND RE-CAULK. SCRAPE CLEAN ALL EXPOSED

EDGES AND PREP SURFACE. (TYPICAL ALL EXTERIOR CAULKED

JOINTS.) (COLOR MATCH NEW CAULK) EXACT COLOR AS

SELECTED BY COR.

2 EXISTING PAINTED CONCRETE SURFACE. REMOVE ALL PAINT AND

POINT UP CONCRETE. APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. (SMOKEY GRAY)

3 EXISTING METAL DOOR. REMOVE EXISTING PAINT, REPAIR ANY

SURFACE DEFECTS OR RUSTED AREAS AS REQUIRED. (TREAT ANY

RUSTED AREAS WITH A COMPATIBLE RUST INHIBITOR) APPLY NEW

PRIMER, SEALANT BASE, AND TOP COAT PER SPECIFICATIONS. FOR

DOOR AND FRAME. (DO NOT PAINT DOOR HARDWARE, PROTECT

AND OR REMOVE AS REQUIRED, CLEAN AND REINSTALL AFTER NEW

PAINTWORK IS COMPLETED.) (SMOKEY GRAY)

4 EXISTING PAINTED CONCRETE SURFACE. REMOVE ALL PAINT AND

POINT UP CONCRETE. APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. (DOVE GRAY)

5 EXISTING METAL WINDOW FRAME. REPAIR ANY SURFACE DEFECTS

OR RUSTED AREAS AS REQUIRED. (TREAT ANY RUSTED AREAS WITH

A COMPATIBLE RUST INHIBITOR) APPLY NEW, SEALANT BASE, AND

TOP COAT PER SPECIFICATIONS. (SMOKEY GRAY)

6 EXISTING ROLL-UP DOOR, CLEAN AND PROTECT DOOR FINISH

DURING ALL WORK. REPAIR AND REFINISH METAL FRAME,

(SAME AS NOTE #5 ABOVE.)

7 EXISTING PAINTED SCORED CMU WALL. REMOVE ANY LOOSE

PAINT AND POINT UP MASONRY, APPLY NEW SEALANT BASE AND

TOP COAT AS REQUIRED. SEE SPECIFICATIONS. (DOVE GRAY)

8 EXISTING PAINTED EFIS WALL SURFACE. REPAIR ALL SURFACE

DEFECTS. PREPARE AND APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. REPAIR AREAS AROUND WALL

MOUNTED LIGHTS, SEE PICTURE, AND TAKE SPECIAL CARE TO

REPAIR DAMAGED AREAS. SEE PICTURES. (DOVE GRAY)

9 EXISTING PAINTED EFIS / METAL SOFFIT OVERHANG, REPAIR ALL

SURFACE DEFECTS. REPLACE EXISTING VENTILATED METAL PANELS

WITH NEW PRE-FINISHED POWDER COAT VENTILATED METAL PANELS.

(DOVE GRAY)

10 GREEN LINE INDICATES EXISTING PARAPET CAP TO REMAIN. CAULK

AND RESEAL ALL JOINTS.

11 EXISTING ALUMINUM ATFP STOREFRONT. CLEAN AND CAULK

SEAMS WHERE STOREFRONT MEETS SURROUNDING STRUCTURE.

12 EXISTING ALUMINUM WINDOW. CLEAN AND CAULKSEAMS WHERE

FRAME MEETS SURROUNDING STRUCTURE.

13 EXISTING PRE-FINISHED METAL SIDING TO REMAIN. CAULK SEAMS

WHERE SIDING MEETS SURROUNDING BRICK.

14 ALUMINUM LOUVER TO REMAIN. RE-CAULK AS REQUIRED.

15 EXISTING BRICKWORK TO REMAIN.

16 EXISTING TEXTURED BLOCK MASONRY TO REMAIN. CLEAN, AND

POINT UP MORTAR JOINTS AS REQUIRED. (INCLUDE 500 LF OF

RE-POINTING IN BASE BID.) APPLY NEW SEALANT BASE AND TOP

COAT. (SMOKEY GRAY)

17 STONE PLAQUE, PROTECT DURING PAINTING AND CLEAN. RE-CAULK.

18 EXISTING ROOF SCUPPER, REMOVE ALL LOOSE PAINT, APPLY NEW

SEALANT BASE AND TOP COAT (SMOKEY GRAY)

19 BLUE LINE INDICATES EXISTING PARAPET CAP TO BE REMOVED AND

REPLACED. (MATCH EXISTING) CAULK AND SEAL ALL JOINTS.

20 REPLACE EXISTING METAL DOOR 4'x7' x1

" NOMINAL. ROUGH

OPENING 48”X 84-3/4”. (FIELD VERIFY) REPLACE DOOR AND FRAME.

PROVIDE NEW HARDWARE TO MATCH EXISTING. PAINT DOOR AND

FRAME SMOKEY GRAY, SEE SPECIFICATIONS.

21 REPLACE EXISTING DOUBLE METAL DOOR 46x80 X1

" NOMINAL.

ROUGH OPENING 94”X 84-1/4”. (FIELD VERIFY) REPLACE DOOR AND

FRAME. PROVIDE NEW HARDWARE TO MATCH EXISTING. PAINT

DOOR AND FRAME SMOKEY GRAY SEE SPECIFICATIONS.

AutoCAD SHX Text

REVISIONS:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

PROJ. NO:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

SHEET NO.

AutoCAD SHX Text

AutoCAD SHX Text N

AutoCAD SHX Text M

AutoCAD SHX Text

AutoCAD SHX Text L

AutoCAD SHX Text K

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text G

AutoCAD SHX Text 240 West Bessemer St. Alcoa, TN. 37701

AutoCAD SHX Text

ph. 865 980 3500 fax. 865 980 3555

AutoCAD SHX Text

COR

AutoCAD SHX Text C:\USERS\CWHANEY\DESKTOP\320\SHEETS.DWG PLOTTED ON:May 23, 2023 3:24 PM BY:CRAIG HANEYPLOTTED ON:May 23, 2023 3:24 PM BY:CRAIG HANEYMay 23, 2023 3:24 PM BY:CRAIG HANEY3:24 PM BY:CRAIG HANEYBY:CRAIG HANEYCRAIG HANEY

AutoCAD SHX Text Louisville, Tennessee

AutoCAD SHX Text

REVISIONS:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

PROJ. NO:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

SHEET NO.

AutoCAD SHX Text

AutoCAD SHX Text N

AutoCAD SHX Text M

AutoCAD SHX Text

AutoCAD SHX Text L

AutoCAD SHX Text K

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text G

AutoCAD SHX Text 240 West Bessemer St. Alcoa, TN. 37701

AutoCAD SHX Text

ph. 865 980 3500 fax. 865 980 3555

AutoCAD SHX Text

COR

AutoCAD SHX Text Louisville, Tennessee

TOP OF OHD

0.0 + 14'-0"

6666 6

33333

2 7

(TYPICAL)

14 14

(TYPICAL)

2 2 2 2 2 2

5.5.23

PSXE222011

4t h A ir R ef u el in g W in g

R ep ai r

B ld g an d

E xt er io r

5.5.23

PSXE222011

4t h A ir R ef u el in g W in g

R ep ai r

B ld g an d

E xt er io r

C2.3

G . 3

R E

O N

CWH

CJS

SCALE 1/8"=1-0"

1BUILDING 320- REAR ELEVATION

TYPICAL AT LIGHTS TYPICAL MULTIPLE LOCATIONS

TYPICAL MULTIPLE LOCATIONS

ROLL-UP DOOR NOTE:

DO NOT PAINT ROLL-UP DOORS UNDER ANY CIRCUMSTANCE.

SEE NOTE #6.

REPLACE EXISTING VENTILATED METAL SOFFIT BUILDING

320 AND 321 WITH NEW POWDER COATED VENTILATED

METAL SOFFIT, MATCH EXISTING PROFILE AS NEARLY AS

PRACTICAL. (DOVE GRAY)

KEY NOTES:

1 RED LINE INDICATES EXISTING CAULK TO BE REMOVED BACK AS

FAR AS POSSIBLE AND RE-CAULK. SCRAPE CLEAN ALL EXPOSED

EDGES AND PREP SURFACE. (TYPICAL ALL EXTERIOR CAULKED

JOINTS.) (COLOR MATCH NEW CAULK) EXACT COLOR AS

SELECTED BY COR.

2 EXISTING PAINTED CONCRETE SURFACE. REMOVE ALL PAINT AND

POINT UP CONCRETE. APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. (SMOKEY GRAY)

3 EXISTING METAL DOOR. REMOVE EXISTING PAINT, REPAIR ANY

SURFACE DEFECTS OR RUSTED AREAS AS REQUIRED. (TREAT ANY

RUSTED AREAS WITH A COMPATIBLE RUST INHIBITOR) APPLY NEW

PRIMER, SEALANT BASE, AND TOP COAT PER SPECIFICATIONS. FOR

DOOR AND FRAME. (DO NOT PAINT DOOR HARDWARE, PROTECT

AND OR REMOVE AS REQUIRED, CLEAN AND REINSTALL AFTER NEW

PAINTWORK IS COMPLETED.) (SMOKEY GRAY)

4 EXISTING PAINTED CONCRETE SURFACE. REMOVE ALL PAINT AND

POINT UP CONCRETE. APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. (DOVE GRAY)

5 EXISTING METAL WINDOW FRAME. REPAIR ANY SURFACE DEFECTS

OR RUSTED AREAS AS REQUIRED. (TREAT ANY RUSTED AREAS WITH

A COMPATIBLE RUST INHIBITOR) APPLY NEW, SEALANT BASE, AND

TOP COAT PER SPECIFICATIONS. (SMOKEY GRAY)

6 EXISTING ROLL-UP DOOR, CLEAN AND PROTECT DOOR FINISH

DURING ALL WORK. REPAIR AND REFINISH METAL FRAME,

(SAME AS NOTE #5 ABOVE.)

7 EXISTING PAINTED SCORED CMU WALL. REMOVE ANY LOOSE

PAINT AND POINT UP MASONRY, APPLY NEW SEALANT BASE AND

TOP COAT AS REQUIRED. SEE SPECIFICATIONS. (DOVE GRAY)

8 EXISTING PAINTED EFIS WALL SURFACE. REPAIR ALL SURFACE

DEFECTS. PREPARE AND APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. REPAIR AREAS AROUND WALL

MOUNTED LIGHTS, SEE PICTURE, AND TAKE SPECIAL CARE TO

REPAIR DAMAGED AREAS. SEE PICTURES. (DOVE GRAY)

9 EXISTING PAINTED EFIS / METAL SOFFIT OVERHANG, REPAIR ALL

SURFACE DEFECTS. REPLACE EXISTING VENTILATED METAL PANELS

WITH NEW PRE-FINISHED POWDER COAT VENTILATED METAL PANELS.

(DOVE GRAY)

10 GREEN LINE INDICATES EXISTING PARAPET CAP TO REMAIN. CAULK

AND RESEAL ALL JOINTS.

11 EXISTING ALUMINUM ATFP STOREFRONT. CLEAN AND CAULK

SEAMS WHERE STOREFRONT MEETS SURROUNDING STRUCTURE.

12 EXISTING ALUMINUM WINDOW. CLEAN AND CAULKSEAMS WHERE

FRAME MEETS SURROUNDING STRUCTURE.

13 EXISTING PRE-FINISHED METAL SIDING TO REMAIN. CAULK SEAMS

WHERE SIDING MEETS SURROUNDING BRICK.

14 ALUMINUM LOUVER TO REMAIN. RE-CAULK AS REQUIRED.

15 EXISTING BRICKWORK TO REMAIN.

16 EXISTING TEXTURED BLOCK MASONRY TO REMAIN. CLEAN, AND

POINT UP MORTAR JOINTS AS REQUIRED. (INCLUDE 500 LF OF

RE-POINTING IN BASE BID.) APPLY NEW SEALANT BASE AND TOP

COAT. (SMOKEY GRAY)

17 STONE PLAQUE, PROTECT DURING PAINTING AND CLEAN. RE-CAULK.

18 EXISTING ROOF SCUPPER, REMOVE ALL LOOSE PAINT, APPLY NEW

SEALANT BASE AND TOP COAT (SMOKEY GRAY)

19 BLUE LINE INDICATES EXISTING PARAPET CAP TO BE REMOVED AND

REPLACED. (MATCH EXISTING) CAULK AND SEAL ALL JOINTS.

20 REPLACE EXISTING METAL DOOR 4'x7' x1

" NOMINAL. ROUGH

OPENING 48”X 84-3/4”. (FIELD VERIFY) REPLACE DOOR AND FRAME.

PROVIDE NEW HARDWARE TO MATCH EXISTING. PAINT DOOR AND

FRAME SMOKEY GRAY, SEE SPECIFICATIONS.

21 REPLACE EXISTING DOUBLE METAL DOOR 46x80 X1

" NOMINAL.

ROUGH OPENING 94”X 84-1/4”. (FIELD VERIFY) REPLACE DOOR AND

FRAME. PROVIDE NEW HARDWARE TO MATCH EXISTING. PAINT

DOOR AND FRAME SMOKEY GRAY SEE SPECIFICATIONS.

AutoCAD SHX Text

REVISIONS:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

PROJ. NO:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

SHEET NO.

AutoCAD SHX Text

AutoCAD SHX Text N

AutoCAD SHX Text M

AutoCAD SHX Text

AutoCAD SHX Text L

AutoCAD SHX Text K

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text G

AutoCAD SHX Text 240 West Bessemer St. Alcoa, TN. 37701

AutoCAD SHX Text

ph. 865 980 3500 fax. 865 980 3555

AutoCAD SHX Text

COR

AutoCAD SHX Text C:\USERS\CWHANEY\DESKTOP\320\SHEETS.DWG PLOTTED ON:May 23, 2023 3:22 PM BY:CRAIG HANEYPLOTTED ON:May 23, 2023 3:22 PM BY:CRAIG HANEYMay 23, 2023 3:22 PM BY:CRAIG HANEY3:22 PM BY:CRAIG HANEYBY:CRAIG HANEYCRAIG HANEY

AutoCAD SHX Text Louisville, Tennessee

AutoCAD SHX Text

REVISIONS:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

PROJ. NO:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

SHEET NO.

AutoCAD SHX Text

AutoCAD SHX Text N

AutoCAD SHX Text M

AutoCAD SHX Text

AutoCAD SHX Text L

AutoCAD SHX Text K

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text G

AutoCAD SHX Text 240 West Bessemer St. Alcoa, TN. 37701

AutoCAD SHX Text

ph. 865 980 3500 fax. 865 980 3555

AutoCAD SHX Text

COR

AutoCAD SHX Text Louisville, Tennessee

(TYPICAL)

21 21

(TYPICAL)

11 11 12 12 12 12

12 12 12 12

5.5.23

PSXE222011

4t h A ir R ef u el in g W in g

R ep ai r

B ld g an d

E xt er io r

5.5.23

PSXE222011

4t h A ir R ef u el in g W in g

R ep ai r

B ld g an d

E xt er io r

C2.4

G . 3

R E

O N

CWH

CJS

SCALE 1/8"=1-0"

1BUILDING 320- RIGHT SIDE ELEVATION

SCALE 1/8"=1-0"

2BUILDING 320- LEFT SIDE ELEVATION

KEY NOTES:

1 RED LINE INDICATES EXISTING CAULK TO BE REMOVED BACK AS

FAR AS POSSIBLE AND RE-CAULK. SCRAPE CLEAN ALL EXPOSED

EDGES AND PREP SURFACE. (TYPICAL ALL EXTERIOR CAULKED

JOINTS.) (COLOR MATCH NEW CAULK) EXACT COLOR AS

SELECTED BY COR.

2 EXISTING PAINTED CONCRETE SURFACE. REMOVE ALL PAINT AND

POINT UP CONCRETE. APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. (SMOKEY GRAY)

3 EXISTING METAL DOOR. REMOVE EXISTING PAINT, REPAIR ANY

SURFACE DEFECTS OR RUSTED AREAS AS REQUIRED. (TREAT ANY

RUSTED AREAS WITH A COMPATIBLE RUST INHIBITOR) APPLY NEW

PRIMER, SEALANT BASE, AND TOP COAT PER SPECIFICATIONS. FOR

DOOR AND FRAME. (DO NOT PAINT DOOR HARDWARE, PROTECT

AND OR REMOVE AS REQUIRED, CLEAN AND REINSTALL AFTER NEW

PAINTWORK IS COMPLETED.) (SMOKEY GRAY)

4 EXISTING PAINTED CONCRETE SURFACE. REMOVE ALL PAINT AND

POINT UP CONCRETE. APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. (DOVE GRAY)

5 EXISTING METAL WINDOW FRAME. REPAIR ANY SURFACE DEFECTS

OR RUSTED AREAS AS REQUIRED. (TREAT ANY RUSTED AREAS WITH

A COMPATIBLE RUST INHIBITOR) APPLY NEW, SEALANT BASE, AND

TOP COAT PER SPECIFICATIONS. (SMOKEY GRAY)

6 EXISTING ROLL-UP DOOR, CLEAN AND PROTECT DOOR FINISH

DURING ALL WORK. REPAIR AND REFINISH METAL FRAME,

(SAME AS NOTE #5 ABOVE.)

7 EXISTING PAINTED SCORED CMU WALL. REMOVE ANY LOOSE

PAINT AND POINT UP MASONRY, APPLY NEW SEALANT BASE AND

TOP COAT AS REQUIRED. SEE SPECIFICATIONS. (DOVE GRAY)

8 EXISTING PAINTED EFIS WALL SURFACE. REPAIR ALL SURFACE

DEFECTS. PREPARE AND APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. REPAIR AREAS AROUND WALL

MOUNTED LIGHTS, SEE PICTURE, AND TAKE SPECIAL CARE TO

REPAIR DAMAGED AREAS. SEE PICTURES. (DOVE GRAY)

9 EXISTING PAINTED EFIS / METAL SOFFIT OVERHANG, REPAIR ALL

SURFACE DEFECTS. REPLACE EXISTING VENTILATED METAL PANELS

WITH NEW PRE-FINISHED POWDER COAT VENTILATED METAL PANELS.

(DOVE GRAY)

10 GREEN LINE INDICATES EXISTING PARAPET CAP TO REMAIN. CAULK

AND RESEAL ALL JOINTS.

11 EXISTING ALUMINUM ATFP STOREFRONT. CLEAN AND CAULK

SEAMS WHERE STOREFRONT MEETS SURROUNDING STRUCTURE.

12 EXISTING ALUMINUM WINDOW. CLEAN AND CAULKSEAMS WHERE

FRAME MEETS SURROUNDING STRUCTURE.

13 EXISTING PRE-FINISHED METAL SIDING TO REMAIN. CAULK SEAMS

WHERE SIDING MEETS SURROUNDING BRICK.

14 ALUMINUM LOUVER TO REMAIN. RE-CAULK AS REQUIRED.

15 EXISTING BRICKWORK TO REMAIN.

16 EXISTING TEXTURED BLOCK MASONRY TO REMAIN. CLEAN, AND

POINT UP MORTAR JOINTS AS REQUIRED. (INCLUDE 500 LF OF

RE-POINTING IN BASE BID.) APPLY NEW SEALANT BASE AND TOP

COAT. (SMOKEY GRAY)

17 STONE PLAQUE, PROTECT DURING PAINTING AND CLEAN. RE-CAULK.

18 EXISTING ROOF SCUPPER, REMOVE ALL LOOSE PAINT, APPLY NEW

SEALANT BASE AND TOP COAT (SMOKEY GRAY)

19 BLUE LINE INDICATES EXISTING PARAPET CAP TO BE REMOVED AND

REPLACED. (MATCH EXISTING) CAULK AND SEAL ALL JOINTS.

20 REPLACE EXISTING METAL DOOR 4'x7' x1

" NOMINAL. ROUGH

OPENING 48”X 84-3/4”. (FIELD VERIFY) REPLACE DOOR AND FRAME.

PROVIDE NEW HARDWARE TO MATCH EXISTING. PAINT DOOR AND

FRAME SMOKEY GRAY, SEE SPECIFICATIONS.

21 REPLACE EXISTING DOUBLE METAL DOOR 46x80 X1

" NOMINAL.

ROUGH OPENING 94”X 84-1/4”. (FIELD VERIFY) REPLACE DOOR AND

FRAME. PROVIDE NEW HARDWARE TO MATCH EXISTING. PAINT

DOOR AND FRAME SMOKEY GRAY SEE SPECIFICATIONS.

AutoCAD SHX Text

REVISIONS:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

PROJ. NO:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

SHEET NO.

AutoCAD SHX Text

AutoCAD SHX Text N

AutoCAD SHX Text M

AutoCAD SHX Text

AutoCAD SHX Text L

AutoCAD SHX Text K

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text G

AutoCAD SHX Text 240 West Bessemer St. Alcoa, TN. 37701

AutoCAD SHX Text

ph. 865 980 3500 fax. 865 980 3555

AutoCAD SHX Text

COR

AutoCAD SHX Text C:\USERS\CWHANEY\DESKTOP\320\SHEETS.DWG PLOTTED ON:May 23, 2023 3:20 PM BY:CRAIG HANEYPLOTTED ON:May 23, 2023 3:20 PM BY:CRAIG HANEYMay 23, 2023 3:20 PM BY:CRAIG HANEY3:20 PM BY:CRAIG HANEYBY:CRAIG HANEYCRAIG HANEY

AutoCAD SHX Text Louisville, Tennessee

AutoCAD SHX Text

REVISIONS:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

PROJ. NO:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

SHEET NO.

AutoCAD SHX Text

AutoCAD SHX Text N

AutoCAD SHX Text M

AutoCAD SHX Text

AutoCAD SHX Text L

AutoCAD SHX Text K

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text G

AutoCAD SHX Text 240 West Bessemer St. Alcoa, TN. 37701

AutoCAD SHX Text

ph. 865 980 3500 fax. 865 980 3555

AutoCAD SHX Text

COR

AutoCAD SHX Text Louisville, Tennessee

TOP OF OHD

0.0 + 14'-0"

33 3 3

(TYPICAL) (TYPICAL)

(TYPICAL)

6 6 6 6 6

(TYPICAL)

2 2 2 2 2 2 2

5.5.23

PSXE222011

4t h A ir R ef u el in g W in g

R ep ai r

B ld g an d

E xt er io r

SCALE 1/8"=1-0"

1BUILDING 321- FRONT ELEVATION

C2.5

G . 3

R E

O N

CWH

CJS

1 2 3 4 5 6

ROLL-UP DOOR NOTE:

DO NOT PAINT ROLL-UP DOORS UNDER ANY CIRCUMSTANCE.

SEE NOTE #6.

KEY NOTES:

1 RED LINE INDICATES EXISTING CAULK TO BE REMOVED BACK AS

FAR AS POSSIBLE AND RE-CAULK. SCRAPE CLEAN ALL EXPOSED

EDGES AND PREP SURFACE. (TYPICAL ALL EXTERIOR CAULKED

JOINTS.) (COLOR MATCH NEW CAULK) EXACT COLOR AS

SELECTED BY COR.

2 EXISTING PAINTED CONCRETE SURFACE. REMOVE ALL PAINT AND

POINT UP CONCRETE. APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. (SMOKEY GRAY)

3 EXISTING METAL DOOR. REMOVE EXISTING PAINT, REPAIR ANY

SURFACE DEFECTS OR RUSTED AREAS AS REQUIRED. (TREAT ANY

RUSTED AREAS WITH A COMPATIBLE RUST INHIBITOR) APPLY NEW

PRIMER, SEALANT BASE, AND TOP COAT PER SPECIFICATIONS. FOR

DOOR AND FRAME. (DO NOT PAINT DOOR HARDWARE, PROTECT

AND OR REMOVE AS REQUIRED, CLEAN AND REINSTALL AFTER NEW

PAINTWORK IS COMPLETED.) (SMOKEY GRAY)

4 EXISTING PAINTED CONCRETE SURFACE. REMOVE ALL PAINT AND

POINT UP CONCRETE. APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. (DOVE GRAY)

5 EXISTING METAL WINDOW FRAME. REPAIR ANY SURFACE DEFECTS

OR RUSTED AREAS AS REQUIRED. (TREAT ANY RUSTED AREAS WITH

A COMPATIBLE RUST INHIBITOR) APPLY NEW, SEALANT BASE, AND

TOP COAT PER SPECIFICATIONS. (SMOKEY GRAY)

6 EXISTING ROLL-UP DOOR, CLEAN AND PROTECT DOOR FINISH

DURING ALL WORK. REPAIR AND REFINISH METAL FRAME,

(SAME AS NOTE #5 ABOVE.)

7 EXISTING PAINTED SCORED CMU WALL. REMOVE ANY LOOSE

PAINT AND POINT UP MASONRY, APPLY NEW SEALANT BASE AND

TOP COAT AS REQUIRED. SEE SPECIFICATIONS. (DOVE GRAY)

8 EXISTING PAINTED EFIS WALL SURFACE. REPAIR ALL SURFACE

DEFECTS. PREPARE AND APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. REPAIR AREAS AROUND WALL

MOUNTED LIGHTS, SEE PICTURE, AND TAKE SPECIAL CARE TO

REPAIR DAMAGED AREAS. SEE PICTURES. (DOVE GRAY)

9 EXISTING PAINTED EFIS / METAL SOFFIT OVERHANG, REPAIR ALL

SURFACE DEFECTS. REPLACE EXISTING VENTILATED METAL PANELS

WITH NEW PRE-FINISHED POWDER COAT VENTILATED METAL PANELS.

(DOVE GRAY)

10 GREEN LINE INDICATES EXISTING PARAPET CAP TO REMAIN. CAULK

AND RESEAL ALL JOINTS.

11 EXISTING ALUMINUM ATFP STOREFRONT. CLEAN AND CAULK

SEAMS WHERE STOREFRONT MEETS SURROUNDING STRUCTURE.

12 EXISTING ALUMINUM WINDOW. CLEAN AND CAULKSEAMS WHERE

FRAME MEETS SURROUNDING STRUCTURE.

13 EXISTING PRE-FINISHED METAL SIDING TO REMAIN. CAULK SEAMS

WHERE SIDING MEETS SURROUNDING BRICK.

14 ALUMINUM LOUVER TO REMAIN. RE-CAULK AS REQUIRED.

15 EXISTING BRICKWORK TO REMAIN.

16 EXISTING TEXTURED BLOCK MASONRY TO REMAIN. CLEAN, AND

POINT UP MORTAR JOINTS AS REQUIRED. (INCLUDE 500 LF OF

RE-POINTING IN BASE BID.) APPLY NEW SEALANT BASE AND TOP

COAT. (SMOKEY GRAY)

17 STONE PLAQUE, PROTECT DURING PAINTING AND CLEAN. RE-CAULK.

18 EXISTING ROOF SCUPPER, REMOVE ALL LOOSE PAINT, APPLY NEW

SEALANT BASE AND TOP COAT (SMOKEY GRAY)

19 BLUE LINE INDICATES EXISTING PARAPET CAP TO BE REMOVED AND

REPLACED. (MATCH EXISTING) CAULK AND SEAL ALL JOINTS.

20 REPLACE EXISTING METAL DOOR 4'x7' x1

" NOMINAL. ROUGH

OPENING 48”X 84-3/4”. (FIELD VERIFY) REPLACE DOOR AND FRAME.

PROVIDE NEW HARDWARE TO MATCH EXISTING. PAINT DOOR AND

FRAME SMOKEY GRAY, SEE SPECIFICATIONS.

21 REPLACE EXISTING DOUBLE METAL DOOR 46x80 X1

" NOMINAL.

ROUGH OPENING 94”X 84-1/4”. (FIELD VERIFY) REPLACE DOOR AND

FRAME. PROVIDE NEW HARDWARE TO MATCH EXISTING. PAINT

DOOR AND FRAME SMOKEY GRAY SEE SPECIFICATIONS.

AutoCAD SHX Text

REVISIONS:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

PROJ. NO:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

SHEET NO.

AutoCAD SHX Text

AutoCAD SHX Text N

AutoCAD SHX Text M

AutoCAD SHX Text

AutoCAD SHX Text L

AutoCAD SHX Text K

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text G

AutoCAD SHX Text 240 West Bessemer St. Alcoa, TN. 37701

AutoCAD SHX Text

ph. 865 980 3500 fax. 865 980 3555

AutoCAD SHX Text

COR

AutoCAD SHX Text C:\USERS\CWHANEY\DESKTOP\320\SHEETS.DWG PLOTTED ON:May 23, 2023 3:19 PM BY:CRAIG HANEYPLOTTED ON:May 23, 2023 3:19 PM BY:CRAIG HANEYMay 23, 2023 3:19 PM BY:CRAIG HANEY3:19 PM BY:CRAIG HANEYBY:CRAIG HANEYCRAIG HANEY

AutoCAD SHX Text Louisville, Tennessee

(TYPICAL)

5.5.23

PSXE222011

4t h A ir R ef u el in g W in g

R ep ai r

B ld g an d

E xt er io r

C2.6

G . 3

R E

O N

CWH

CJS

SCALE 1/8"=1-0"

1BUILDING 321- REAR ELEVATION

123456

KEY NOTES:

1 RED LINE INDICATES EXISTING CAULK TO BE REMOVED BACK AS

FAR AS POSSIBLE AND RE-CAULK. SCRAPE CLEAN ALL EXPOSED

EDGES AND PREP SURFACE. (TYPICAL ALL EXTERIOR CAULKED

JOINTS.) (COLOR MATCH NEW CAULK) EXACT COLOR AS

SELECTED BY COR.

2 EXISTING PAINTED CONCRETE SURFACE. REMOVE ALL PAINT AND

POINT UP CONCRETE. APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. (SMOKEY GRAY)

3 EXISTING METAL DOOR. REMOVE EXISTING PAINT, REPAIR ANY

SURFACE DEFECTS OR RUSTED AREAS AS REQUIRED. (TREAT ANY

RUSTED AREAS WITH A COMPATIBLE RUST INHIBITOR) APPLY NEW

PRIMER, SEALANT BASE, AND TOP COAT PER SPECIFICATIONS. FOR

DOOR AND FRAME. (DO NOT PAINT DOOR HARDWARE, PROTECT

AND OR REMOVE AS REQUIRED, CLEAN AND REINSTALL AFTER NEW

PAINTWORK IS COMPLETED.) (SMOKEY GRAY)

4 EXISTING PAINTED CONCRETE SURFACE. REMOVE ALL PAINT AND

POINT UP CONCRETE. APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. (DOVE GRAY)

5 EXISTING METAL WINDOW FRAME. REPAIR ANY SURFACE DEFECTS

OR RUSTED AREAS AS REQUIRED. (TREAT ANY RUSTED AREAS WITH

A COMPATIBLE RUST INHIBITOR) APPLY NEW, SEALANT BASE, AND

TOP COAT PER SPECIFICATIONS. (SMOKEY GRAY)

6 EXISTING ROLL-UP DOOR, CLEAN AND PROTECT DOOR FINISH

DURING ALL WORK. REPAIR AND REFINISH METAL FRAME,

(SAME AS NOTE #5 ABOVE.)

7 EXISTING PAINTED SCORED CMU WALL. REMOVE ANY LOOSE

PAINT AND POINT UP MASONRY, APPLY NEW SEALANT BASE AND

TOP COAT AS REQUIRED. SEE SPECIFICATIONS. (DOVE GRAY)

8 EXISTING PAINTED EFIS WALL SURFACE. REPAIR ALL SURFACE

DEFECTS. PREPARE AND APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. REPAIR AREAS AROUND WALL

MOUNTED LIGHTS, SEE PICTURE, AND TAKE SPECIAL CARE TO

REPAIR DAMAGED AREAS. SEE PICTURES. (DOVE GRAY)

9 EXISTING PAINTED EFIS / METAL SOFFIT OVERHANG, REPAIR ALL

SURFACE DEFECTS. REPLACE EXISTING VENTILATED METAL PANELS

WITH NEW PRE-FINISHED POWDER COAT VENTILATED METAL PANELS.

(DOVE GRAY)

10 GREEN LINE INDICATES EXISTING PARAPET CAP TO REMAIN. CAULK

AND RESEAL ALL JOINTS.

11 EXISTING ALUMINUM ATFP STOREFRONT. CLEAN AND CAULK

SEAMS WHERE STOREFRONT MEETS SURROUNDING STRUCTURE.

12 EXISTING ALUMINUM WINDOW. CLEAN AND CAULKSEAMS WHERE

FRAME MEETS SURROUNDING STRUCTURE.

13 EXISTING PRE-FINISHED METAL SIDING TO REMAIN. CAULK SEAMS

WHERE SIDING MEETS SURROUNDING BRICK.

14 ALUMINUM LOUVER TO REMAIN. RE-CAULK AS REQUIRED.

15 EXISTING BRICKWORK TO REMAIN.

16 EXISTING TEXTURED BLOCK MASONRY TO REMAIN. CLEAN, AND

POINT UP MORTAR JOINTS AS REQUIRED. (INCLUDE 500 LF OF

RE-POINTING IN BASE BID.) APPLY NEW SEALANT BASE AND TOP

COAT. (SMOKEY GRAY)

17 STONE PLAQUE, PROTECT DURING PAINTING AND CLEAN. RE-CAULK.

18 EXISTING ROOF SCUPPER, REMOVE ALL LOOSE PAINT, APPLY NEW

SEALANT BASE AND TOP COAT (SMOKEY GRAY)

19 BLUE LINE INDICATES EXISTING PARAPET CAP TO BE REMOVED AND

REPLACED. (MATCH EXISTING) CAULK AND SEAL ALL JOINTS.

20 REPLACE EXISTING METAL DOOR 4'x7' x1

" NOMINAL. ROUGH

OPENING 48”X 84-3/4”. (FIELD VERIFY) REPLACE DOOR AND FRAME.

PROVIDE NEW HARDWARE TO MATCH EXISTING. PAINT DOOR AND

FRAME SMOKEY GRAY, SEE SPECIFICATIONS.

21 REPLACE EXISTING DOUBLE METAL DOOR 46x80 X1

" NOMINAL.

ROUGH OPENING 94”X 84-1/4”. (FIELD VERIFY) REPLACE DOOR AND

FRAME. PROVIDE NEW HARDWARE TO MATCH EXISTING. PAINT

DOOR AND FRAME SMOKEY GRAY SEE SPECIFICATIONS.

AutoCAD SHX Text

REVISIONS:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

PROJ. NO:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

SHEET NO.

AutoCAD SHX Text

AutoCAD SHX Text N

AutoCAD SHX Text M

AutoCAD SHX Text

AutoCAD SHX Text L

AutoCAD SHX Text K

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text G

AutoCAD SHX Text 240 West Bessemer St. Alcoa, TN. 37701

AutoCAD SHX Text

ph. 865 980 3500 fax. 865 980 3555

AutoCAD SHX Text

COR

AutoCAD SHX Text C:\USERS\CWHANEY\DESKTOP\320\SHEETS.DWG PLOTTED ON:May 23, 2023 3:16 PM BY:CRAIG HANEYPLOTTED ON:May 23, 2023 3:16 PM BY:CRAIG HANEYMay 23, 2023 3:16 PM BY:CRAIG HANEY3:16 PM BY:CRAIG HANEYBY:CRAIG HANEYCRAIG HANEY

AutoCAD SHX Text Louisville, Tennessee

FINISH GRADE

(TYPICAL)

20203

(TYPICAL)

FINISH GRADE

(TYPICAL)

134 CIVIL ENGINEER SQUADRON TH

5.5.23

PSXE222011

4t h A ir R ef u el in g W in g

R ep ai r

B ld g an d

E xt er io r

C2.7

G . 3

R E

O N

CWH

CJS

SCALE 1/8"=1-0"

1BUILDING 321- LEFT SIDE ELEVATION

SCALE 1/8"=1-0"

2BUILDING 321- RIGHT SIDE ELEVATION

SCALE: NONE

3SIGN CONNECTION DETAIL

12" HIGH x 21' LONG x 2

" DEEP WEATHERPROOF WIREWAY, BY SIGN CONTRACTOR.

MOUNT ON BACK SIDE OF PARAPET WALL, DRILL THRU WALL AT EACH LETTER AND

CONNECT LOW VOLTAGE LED BACKLIGHT CONCEALED. MOUNT LED DRIVER / TRANSFORMERS

AS REQUIRED INSIDE WIREWAY. SIGN CONTRACTOR TO PROVIDE ADDITIONAL DETAILS

IN SHOP DRAWINGS. SEAL ALL PENETRATIONS.

LAY-IN CEILING IN BRIEFING ROOM (BEYOND)

WEATHERPROOF TOGGLE SWITCH TYPE DISCONNECT

MOUNT RECESSED IN BOTTOM OF WIREWAY.

TOGGLE SWITCH TYPE DISCONNECT

MOUNTED ON WIREWAY.

FLASH AND SEAL MEMBRANE ROOF

PENETRATION BELOW DECKING

3/4" CONDUIT WITH 2#12 & #12 CU GROUND

EXTEND CONCEALED ABOVE CEILING TO EXISTING 20/1 SPARE

BREAKER #32 IN PANEL "M" APPROXIMATELY 110 LF. REWORK

EXISTING PHOTO-CELL CONTROLLING CKT M-30 (CANOPY LTG)

TO CONTROL BOTH CIRCUITS.

STRUCTURAL CEILING IN BRIEFING ROOM (BEYOND)

6" HIGH x 9' LONG x 6" DEEP WIREWAY, BY SIGN CONTRACTOR.

MOUNT ON BACK SIDE OF WALL ABOVE ACCESSIBLE CEILING ,

DRILL THRU WALL AT EACH ICON COMPONENT PART AND

CONNECT LOW VOLTAGE LED BACKLIGHT CONCEALED.

MOUNT LED DRIVER / TRANSFORMERS AS REQUIRED INSIDE

WIREWAY. SIGN CONTRACTOR TO PROVIDE ADDITIONAL DETAILS

IN SHOP DRAWINGS. SEAL ALL PENETRATIONS.

WIRE AND CONSTRUCT SIGN COMPONENTS IN A MANNER

TO ALLOW EACH INDIVIDUAL COMPONENT ACCESS TO WIREWAY

WHILE KEEPING ALL WIRING CONCEALED. EXCEPT

GEAR COMPONENT OF ICON, ROUTE WIRING FOR GEAR

LEDS THRU DIVIDER LEGS AND 3/4" CONDUIT CHASE.

(TYPICAL)

3/4" ALUMINUM CONDUIT CHASE. FOR LOW VOLTAGE WIRING.

PAINT CONDUIT SMOKEY GRAY TO MATCH BACKGROUND WALL.

NOTE:

ALL COMPONENTS USED IN SIGN CONSTRUCTION

TO BE UL LISTED FOR THE INTENDED PURPOSE.

KEY NOTES:

1 RED LINE INDICATES EXISTING CAULK TO BE REMOVED BACK AS

FAR AS POSSIBLE AND RE-CAULK. SCRAPE CLEAN ALL EXPOSED

EDGES AND PREP SURFACE. (TYPICAL ALL EXTERIOR CAULKED

JOINTS.) (COLOR MATCH NEW CAULK) EXACT COLOR AS

SELECTED BY COR.

2 EXISTING PAINTED CONCRETE SURFACE. REMOVE ALL PAINT AND

POINT UP CONCRETE. APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. (SMOKEY GRAY)

3 EXISTING METAL DOOR. REMOVE EXISTING PAINT, REPAIR ANY

SURFACE DEFECTS OR RUSTED AREAS AS REQUIRED. (TREAT ANY

RUSTED AREAS WITH A COMPATIBLE RUST INHIBITOR) APPLY NEW

PRIMER, SEALANT BASE, AND TOP COAT PER SPECIFICATIONS. FOR

DOOR AND FRAME. (DO NOT PAINT DOOR HARDWARE, PROTECT

AND OR REMOVE AS REQUIRED, CLEAN AND REINSTALL AFTER NEW

PAINTWORK IS COMPLETED.) (SMOKEY GRAY)

4 EXISTING PAINTED CONCRETE SURFACE. REMOVE ALL PAINT AND

POINT UP CONCRETE. APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. (DOVE GRAY)

5 EXISTING METAL WINDOW FRAME. REPAIR ANY SURFACE DEFECTS

OR RUSTED AREAS AS REQUIRED. (TREAT ANY RUSTED AREAS WITH

A COMPATIBLE RUST INHIBITOR) APPLY NEW, SEALANT BASE, AND

TOP COAT PER SPECIFICATIONS. (SMOKEY GRAY)

6 EXISTING ROLL-UP DOOR, CLEAN AND PROTECT DOOR FINISH

DURING ALL WORK. REPAIR AND REFINISH METAL FRAME,

(SAME AS NOTE #5 ABOVE.)

7 EXISTING PAINTED SCORED CMU WALL. REMOVE ANY LOOSE

PAINT AND POINT UP MASONRY, APPLY NEW SEALANT BASE AND

TOP COAT AS REQUIRED. SEE SPECIFICATIONS. (DOVE GRAY)

8 EXISTING PAINTED EFIS WALL SURFACE. REPAIR ALL SURFACE

DEFECTS. PREPARE AND APPLY NEW SEALANT BASE AND TOP COAT

AS REQUIRED. SEE SPECIFICATIONS. REPAIR AREAS AROUND WALL

MOUNTED LIGHTS, SEE PICTURE, AND TAKE SPECIAL CARE TO

REPAIR DAMAGED AREAS. SEE PICTURES. (DOVE GRAY)

9 EXISTING PAINTED EFIS / METAL SOFFIT OVERHANG, REPAIR ALL

SURFACE DEFECTS. REPLACE EXISTING VENTILATED METAL PANELS

WITH NEW PRE-FINISHED POWDER COAT VENTILATED METAL PANELS.

(DOVE GRAY)

10 GREEN LINE INDICATES EXISTING PARAPET CAP TO REMAIN. CAULK

AND RESEAL ALL JOINTS.

11 EXISTING ALUMINUM ATFP STOREFRONT. CLEAN AND CAULK

SEAMS WHERE STOREFRONT MEETS SURROUNDING STRUCTURE.

12 EXISTING ALUMINUM WINDOW. CLEAN AND CAULKSEAMS WHERE

FRAME MEETS SURROUNDING STRUCTURE.

13 EXISTING PRE-FINISHED METAL SIDING TO REMAIN. CAULK SEAMS

WHERE SIDING MEETS SURROUNDING BRICK.

14 ALUMINUM LOUVER TO REMAIN. RE-CAULK AS REQUIRED.

15 EXISTING BRICKWORK TO REMAIN.

16 EXISTING TEXTURED BLOCK MASONRY TO REMAIN. CLEAN, AND

POINT UP MORTAR JOINTS AS REQUIRED. (INCLUDE 500 LF OF

RE-POINTING IN BASE BID.) APPLY NEW SEALANT BASE AND TOP

COAT. (SMOKEY GRAY)

17 STONE PLAQUE, PROTECT DURING PAINTING AND CLEAN. RE-CAULK.

18 EXISTING ROOF SCUPPER, REMOVE ALL LOOSE PAINT, APPLY NEW

SEALANT BASE AND TOP COAT (SMOKEY GRAY)

19 BLUE LINE INDICATES EXISTING PARAPET CAP TO BE REMOVED AND

REPLACED. (MATCH EXISTING) CAULK AND SEAL ALL JOINTS.

20 REPLACE EXISTING METAL DOOR 4'x7' x1

" NOMINAL. ROUGH

OPENING 48”X 84-3/4”. (FIELD VERIFY) REPLACE DOOR AND FRAME.

PROVIDE NEW HARDWARE TO MATCH EXISTING. PAINT DOOR AND

FRAME SMOKEY GRAY, SEE SPECIFICATIONS.

21 REPLACE EXISTING DOUBLE METAL DOOR 46x80 X1

" NOMINAL.

ROUGH OPENING 94”X 84-1/4”. (FIELD VERIFY) REPLACE DOOR AND

FRAME. PROVIDE NEW HARDWARE TO MATCH EXISTING. PAINT

DOOR AND FRAME SMOKEY GRAY SEE SPECIFICATIONS.

AutoCAD SHX Text

REVISIONS:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

PROJ. NO:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

SHEET NO.

AutoCAD SHX Text

AutoCAD SHX Text N

AutoCAD SHX Text M

AutoCAD SHX Text

AutoCAD SHX Text L

AutoCAD SHX Text K

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text G

AutoCAD SHX Text 240 West Bessemer St. Alcoa, TN. 37701

AutoCAD SHX Text

ph. 865 980 3500 fax. 865 980 3555

AutoCAD SHX Text

COR

AutoCAD SHX Text C:\USERS\CWHANEY\DESKTOP\320\SHEETS.DWG PLOTTED ON:May 23, 2023 3:14 PM BY:CRAIG HANEYPLOTTED ON:May 23, 2023 3:14 PM BY:CRAIG HANEYMay 23, 2023 3:14 PM BY:CRAIG HANEY3:14 PM BY:CRAIG HANEYBY:CRAIG HANEYCRAIG HANEY

AutoCAD SHX Text Louisville, Tennessee

5.5.23

PSXE222011

4t h A ir R ef u el in g W in g

R ep ai r

B ld g an d

E xt er io r

C2.8

N S

CWH

CJS

SECTION 09 96 00

HIGH PERFORMANCE COATINGS - BASIS OF DESIGN (TNEMEC)

PART 1 GENERAL

1.1 SECTION INCLUDES

A. COATING SYSTEMS FOR EXTERIOR STEEL AND MASONRY.

1.2 REFERENCES

A. ASTM D 16 - TERMINOLOGY RELATING TO PAINT, VARNISH, LACQUER, AND RELATED PRODUCTS.

B. SSPC-SP 1 - SOLVENT CLEANING.

C. SSPC-SP11 POWER-TOOL CLEANING TO BARE METAL.

D. SSPC-SP2 HAND TOOL CLEANING.

E. SSPC-SP3 POWER-TOOL CLEANING.

1.3 DEFINITIONS

A. DEFINITIONS OF PAINTING TERMS: ASTM D 16, UNLESS OTHERWISE SPECIFIED.

B. DRY FILM THICKNESS (DFT): THICKNESS OF A COAT OF PAINT IN FULLY CURED STATE MEASURED IN MILS (1/1000 INCH).

1.4 SUBMITTALS

A. PROVIDE ELECTRONIC SHOP DRAWINGS FOR ALL MAJOR MATERIALS INTENDED TO BE USED.

INCLUDING BUT NOT LIMITED TO:

HIGH PERFORMANCE COATINGS

SILICONE BASED CAULK

SIGN LAYOUT MATERIALS INCLUDING HARDWARE AND DIMENSIONS.

MSDS FOR ALL SOLVENTS AND COATINGS TO BE APPLIED

OTHER MATERIALS WHEN REQUESTED BY COR.

B. PRODUCT DATA: SUBMIT MANUFACTURER'S PRODUCT DATA FOR EACH COATING, INCLUDING GENERIC DESCRIPTION, COMPLETE TECHNICAL DATA, SURFACE

PREPARATION, AND APPLICATION INSTRUCTIONS.

C. COLOR SAMPLES: SUBMIT MANUFACTURER'S COLOR SAMPLES SHOWING FULL RANGE OF STANDARD COLORS. SAMPLES MUST BE 12"x12"

D. SUBMITTALS SHALL INCLUDE PERFORMANCE DATA AS CERTIFIED BY A QUALIFIED TESTING LABORATORY.

E. SUBSTITUTIONS WHICH DECREASE THE FILM THICKNESS, THE NUMBER OF COATS APPLIED, CHANGE THE GENERIC TYPE OF COATING, OR FAIL TO MEET THE

PERFORMANCE CRITERIA OF THE SPECIFIED MATERIALS WILL NOT BE APPROVED. PRIME AND FINISH COATS OF ALL SURFACES SHALL BE FURNISHED BY THE

SAME MANUFACTURER.

F. MATERIALS SUPPLIED BY OTHER MANUFACTURERS MAY BE CONSIDERED FOR SUBSTITUTION IF THE FOLLOWING PREVAILING CONDITIONS EXIST:

1. PERFORMANCE CRITERIA OF THE SPECIFIED MATERIALS ARE EXCEEDED BY THE SUBMITTED ALTERNATE MATERIALS AS LISTED IN PARAGRAPH 2.1

AND DETAILED ON THE TECHNICAL DATA SHEETS OF EACH SPECIFIED PRODUCT.

2. THE SUBMITTAL MUST COMPARE THE PERFORMANCE CRITERIA OF THE SPECIFIED MATERIAL WITH THAT OF THE SUBMITTED MATERIAL AND BE

DOCUMENTED IN A SIDE BY SIDE MANNER FOR REVIEW.

3. SUBSTITUTE MATERIALS MUST BE FOR COMPLETE SYSTEMS AND NOT INDIVIDUAL PRODUCTS COMBINED WITH THE SPECIFIED MATERIALS AND THE

PERFORMANCE CRITERIA FOR ALL PRODUCTS WITHIN A SYSTEM MUST MEET OR EXCEED THE SPECIFIED MATERIALS.

1.5 QUALITY ASSURANCE

A. MANUFACTURER'S QUALIFICATIONS:

1. SPECIALIZE IN MANUFACTURE OF COATINGS WITH A MINIMUM OF 5 YEARS SUCCESSFUL EXPERIENCE.

2. ABLE TO DEMONSTRATE SUCCESSFUL PERFORMANCE ON COMPARABLE PROJECTS.

3. SINGLE SOURCE RESPONSIBILITY: COATINGS AND COATING APPLICATION ACCESSORIES SHALL BE PRODUCTS OF A SINGLE MANUFACTURER.

B. APPLICATOR'S QUALIFICATIONS:

1. EXPERIENCED IN APPLICATION OF SPECIFIED COATINGS FOR A MINIMUM OF 5 YEARS ON PROJECTS OF SIMILAR SIZE AND COMPLEXITY TO THIS

WORK.

2. APPLICATOR'S PERSONNEL: EMPLOY PERSONS TRAINED FOR APPLICATION OF SPECIFIED COATINGS.

C. MOCK-UPS: PREPARE MOCK-UP. OBTAIN COR'S APPROVAL OF MOCK-UPS. RETAIN MOCK-UPS TO ESTABLISH INTENDED STANDARDS BY WHICH COATING

SYSTEMS WILL BE JUDGED.

1.6 DELIVERY, STORAGE, AND HANDLING

A. DELIVERY: DELIVER MATERIALS TO SITE IN MANUFACTURER'S ORIGINAL, UNOPENED CONTAINERS AND PACKAGING, WITH LABELS CLEARLY IDENTIFYING:

1. COATING OR MATERIAL NAME.

2. MANUFACTURER.

3. COLOR NAME AND NUMBER.

4. BATCH OR LOT NUMBER.

5. DATE OF MANUFACTURE.

6. MIXING AND THINNING INSTRUCTIONS.

B. STORAGE:

1. STORE MATERIALS IN A CLEAN DRY AREA AND WITHIN TEMPERATURE RANGE IN ACCORDANCE WITH MANUFACTURER'S INSTRUCTIONS.

2. KEEP CONTAINERS SEALED UNTIL READY FOR USE.

3. DO NOT USE MATERIALS BEYOND MANUFACTURER'S SHELF LIFE LIMITS.

C. HANDLING: PROTECT MATERIALS DURING HANDLING AND APPLICATION TO PREVENT DAMAGE OR CONTAMINATION.

1.7 ENVIRONMENTAL REQUIREMENTS

A. WEATHER:

1. AIR AND SURFACE TEMPERATURES: PREPARE SURFACES AND APPLY AND CURE COATINGS WITHIN AIR AND SURFACE TEMPERATURE RANGE IN

ACCORDANCE WITH MANUFACTURER'S INSTRUCTIONS.

2. SURFACE TEMPERATURE: MINIMUM OF 5 DEGREES F (3 DEGREES C) ABOVE DEW POINT.

3. RELATIVE HUMIDITY: PREPARE SURFACES AND APPLY AND CURE COATINGS WITHIN RELATIVE HUMIDITY RANGE IN ACCORDANCE WITH

MANUFACTURER'S INSTRUCTIONS.

4. PRECIPITATION: DO NOT PREPARE SURFACES OR APPLY COATINGS IN RAIN, SNOW, FOG, OR MIST.

5. WIND: DO NOT SPRAY COATINGS IF WIND VELOCITY IS ABOVE MANUFACTURER'S LIMIT.

B. VENTILATION: PROVIDE VENTILATION DURING COATING EVAPORATION STAGE IN CONFINED OR ENCLOSED AREAS IN ACCORDANCE WITH MANUFACTURER'S

INSTRUCTIONS.

C. DUST AND CONTAMINANTS:

1. SCHEDULE COATING WORK TO AVOID EXCESSIVE DUST AND AIRBORNE CONTAMINANTS.

2. PROTECT WORK AREAS FROM EXCESSIVE DUST AND AIRBORNE CONTAMINANTS DURING COATING APPLICATION AND CURING.

PART 2 PRODUCTS

2.1 MANUFACTURER

A. BASIS OF DESIGN:

2.2 COATING SYSTEMS FOR SHOP AREA

A. PREVIOUSLY PAINTED EXTERIOR STEEL - METAL DOORS, DOOR FRAMES, WINDOWS FRAMES

1. SURFACE PREPARATION: THOROUGHLY AND UNIFORMLY SAND, REMOVE CHALK AND ALL CONTAMINANTS. CLEAN AND DRY. RUSTED AREAS:

SSPC-SP11 POWER-TOOL CLEAN TO BARE METAL.

2. SPOT PRIME BARE METAL: SPOT PRIMED BARE AREAS WITH MODIFIED AROMATIC POLYURETHANE AT 2.0 TO 3.0 MILS DFT.

3. FULL INTERMEDIATE COAT: HDP ACRYLIC POLYMER AT 2.0 TO 3.0 MILS DFT.

4. FINISH COAT: TNEMEC HDP ACRYLIC POLYMER AT 2.0 TO 3.0 MILS DFT.

MODIFIED AROMATIC POLYURETHANE

a. ADHESION ASTM D 3359-NO LESS THAN RATING OF 5B.

b. ADHESION ASTM D 4541 (METHOD B, TYPE II)-NO LESS THAN 1,300 PSI ADHESION, AVERAGE OF THREE TESTS.

c. ADHESION ASTM D 4541 (METHOD E, TYPE V)-NO LESS THAN 1,483 PSI ADHESION, AVERAGE OF THREE TESTS.

d. HUMIDITY ASTM D 4585-NO BLISTERING, CRACKING, OR DELAMINATION OF FILM. NO MORE THAN .03% RUSTING ON THE PLANE AFTER 5,000 HOURS

EXPOSURE.

e. SALT…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Aug 16, 2023.