BL023-23 Addendum #1

January 30, 2023

Addendum #1

BL023-23

Purchase of Leather Structural Firefighter Boots on an Annual Contract

Please make the following changes to the above referenced Invitation to Bid.

Page 8, Section IX: Boot Specifications, Specifications for Structural Fire Fighting 14” Pull-On Boots and Supplier Response, Resoling Service.

DELETE: The awarded vendor shall have resoling services available at their factory as needed.

ADD: The awarded vendor should have resoling services available at their factory as needed.

Please see the below summation of questions and answers for the above solicitation.

Questions:

Q1. How can the supplier determine if an equivalent is acceptable?

A1. Suppliers may submit an equivalent they deem appropriate. The County will determine whether the equivalent would be approved.

Q2. Can the County provide a previous bid and bid tab?

A2. Refer to the attachments below.

Q3. Our company does not have resoling services available at our facilities. Is this acceptable?

A3. See the solicitation change referenced above. If resoling services are not available at a supplier’s facilities, mark “exception” and explain.

Q4: Do samples need to be included with the bid?

A4: No. If samples are requested, supplier must respond to and fulfill the request within 21 days. See Page 2, Scope and Requirements, IV. Samples for further information.

This addendum should be signed in the space provided below and returned with your bid.

Failure to do so may result in your bid being deemed non-responsive.

Thank you, Casey Beauston Purchasing Associate II

Company Name

Authorized Representative

BID TABULATION Page 1 of 1

BL129-18

Purchase of Leather Structural Firefighter Boots on an Annual Contract Department of Fire and Emergency Services

5% increase*

February 06, 2022 - February 05, 2023

Bennett Fire Products Company, Inc.

(OC)

ITEM # DESCRIPTION APPROX. QTY UNIT

PRICE

TOTAL

PRICE

1 Globe Structural Fire Fighting 14" Pull on Supreme Boots or approved equivalent. 300 Ea $383.00 $114,900.54

TOTAL $114,900.54

Will Vendor Hold Pricing Firm? Renewal Option 1 Yes Will Vendor Hold Pricing Firm? Renewal Option 2 Yes Will Vendor Hold Pricing Firm? Renewal Option 3 5% increase* Will Vendor Hold Pricing Firm? Renewal Option 4 1% increase**

*approximate. Vendor stated price would be $383.00 **approximate. Vendor stated price would be $389.00 bc

Recommended Vendor:

Bennett Fire Products Company, Inc.

Attn: Danny Bennett 195 Stockwood Dr., Ste. 170 Woodstock, GA 30188 Phone: 770-402-9910 Email: bennettfire@att.net mailto:bennettfire@att.net

The following pages should be returned in duplicate as your bid:

• Delivery Compliance Statement, Page 3

• Vendor Specifications Compliance, Pages 4-9

• Bid Schedule, Pages 10-11

• References, Page 12

• Code of Ethics, Page 13

November 29, 2018

INVITATION TO BID

The Gwinnett County Board of Commissioners is soliciting competitive sealed bids from qualified suppliers for the Purchase of Leather Structural Firefighter Boots on an Annual Contract with four (4) additional one year options for renewal for the Department of Fire and Emergency Services.

Bids should be typed or submitted in ink and returned in a sealed container marked on the outside with the BL# and Company Name. Bids will be received until 2:50 P.M. local time on Friday, December 28, 2018 at the Gwinnett County Financial Services - Purchasing Division – 2nd Floor, 75 Langley Drive, Lawrenceville, Georgia 30046. Any bid received after this date and time will not be accepted. Bids will be publicly opened and only names of submitting firms will be read at 3:00 P.M. A list of firms submitting bids will be available the following business day on the website www.gwinnettcounty.com.

Questions regarding bids should be directed to Terri Shirley, Purchasing Associate II, at terri.shirley@gwinnettcounty.com or by calling 770-822-7788, no later than 3:00 P.M. on Friday, December 14, 2018 at 3:00 P.M. Bids are legal and binding upon the bidder when submitted. All bids should be submitted in duplicate.

Gwinnett County does not discriminate on the basis of disability in the admission or access to its programs or activities. Any requests for reasonable accommodations required by individuals to fully participate in any open meeting, program or activity of Gwinnett County Government should be directed to Michael Plonowski, Gwinnett County Justice and Administration Center, 770-822-8015.

The written bid documents supersede any verbal or written prior communications between the parties.

Award will be made to the supplier submitting the lowest responsive and responsible bid. Gwinnett County reserves the right to reject any or all bids to waive technicalities and to make an award deemed in its best interest.

Bids may be split or awarded in entirety. Gwinnett County reserves the option to negotiate terms, conditions and pricing with the lowest responsive, responsible bidder(s) at its discretion.

Award notification will be posted after award on the County website, www.gwinnettcounty.com and companies submitting a bid will be notified via email.

We look forward to your bid and appreciate your interest in Gwinnett County.

Terri Shirley

Terri Shirley Purchasing Associate II http://www.gwinnettcounty.com/ mailto:terri.shirley@gwinnettcounty.com

BL129-18 Page 2

I. General Purpose Gwinnett County is seeking competitive formal written bids for the Purchase of Leather Structural Firefighter Boots for the Department of Fire and Emergency Services on an Annual contract with four (4) options to renew.

Gwinnett County requires pricing and delivery to remain firm for the duration of the initial term of contract. No increases will be accepted during that time. Contract shall begin upon award and continue for a one-year period.

II. Quantities

Quantities are estimated for quote purposes only and not to be construed as a commitment to order a specific quantity. Items will be ordered as needed.

All quantities stated on quote schedule are approximate 12-month usage and actual quantities may vary dependent upon need. Orders will be placed on an “as needed” basis and must be filled regardless of quantity or total dollar amount.

III. Award

Award will be made to the supplier submitting the lowest responsive and responsible quote. Gwinnett County Reserves the right to reject any or all bids, to waive technicalities, and to make an award deemed in its best interest. Awarded supplier is to provide a fitter line to be used by department for accurate sizing.

IV. Samples

Alternates bid will require samples to be provided for wear trial. Sizes will be identified at the time of the trial and will include at least one female size. Samples must be furnished upon request by the user department and will be at supplier’s expense. Each sample is to be labeled with supplier’s name, item number as indicated in the Bid Schedule, and bid number. All products are to be identified by brand and manufacturer number. Samples requested but no supplied may result in rejection of that item as non-responsive. Samples will be shipped to the following address:

V. Ordering

Fire Resource Management 450 Hosea Road

Lawrenceville, GA 30045 Attn: Yvonne Shannon

Following bid award, purchase orders will be placed directly to the successful supplier, on an as needed basis, by the Gwinnett County Department of Fire and Emergency Services for the duration of the contract period.

VI. Delivery

The successful supplier must include a packing slip and/or tag in each order with the specified employee name as provided on the purchase order. All orders should be received within 21 days from the date of order. Manufacture date shall be on affixed label of product received and shall not be more than 6 months prior to the purchase order date.

Unit prices bid for each item should include shipping, delivery, and handling charges and should be shipped to 450 Hosea Road, Lawrenceville, GA 30045.

F.O.B. Point: Unless otherwise stated on the bid schedule item(s) must be shipped F.O.B. Destination. The seller shall retain title for the risk of transportation, including the filing for loss or damages. The invoice covering the items is not payable until items are delivered and the contract of carriage has been completed. Unless the F.O.B. clause states otherwise, the seller assumes transportation and related charges either by payment or allowance.

BL129-18 Page 3

Failure to return this page as part of bid document may result in rejection of bid.

A list of all serial numbers and manufacturing dates for boots shall be provided by the awarded vendor electronically in an Excel spreadsheet format upon delivery to the County.

VII. References

A minimum of three (3) references that can provide information regarding company’s products and service should be listed on the included reference sheet.

VIII. Supplier Requirements

Successful supplier shall be a stocking distributor and have a fully stocked building with employees available during Normal business hours and building must be located within 50 “drive” miles of Gwinnett County Fire & Emergency Services, Resource Management located at 450 Hosea Road, Lawrenceville, GA 30045. The mileage MUST be Verifiable by using the mapping/directions program of either MapQuest or Google and entering:

Start Location: Gwinnett County Fire & Emergency Services

Resource Management 450 Hosea Road Lawrenceville, GA 30045

Enter complete address of stocking distributor below for verification:

Verifiable Number of Miles from distributor location to GC Fire Resource Management

Comply Exception

BL129-18 Page 4

FAILURE TO RETURN THIS PAGE AS PART OF YOUR BID MAY RESULT IN REJECTION.

IX. Boot Specifications

Product Specification The use of brand name is not for restrictive purposes or to limit competition, but to assist suppliers in determining the standard of quality and basis of design Gwinnett County is seeking. It should be understood that items equaling or surpassing the quality level are also acceptable. Gwinnett County shall be the sole determinant of acceptability of all approved equivalents. It is the supplier's responsibility to prove equivalent products equal or exceed the quality level of the product(s) specified. If quoting an equivalent product, specifications/brochures should be submitted with quote.

When quoting an equivalent product, supplier represents:

• Equivalent product has been personally investigated and determined to be equal to or superior in all respects to that specified.

• Product identification, including manufacturer's name and address should be provided as part of quote document.

• Manufacturer’s literature, including product description, performance and test data and reference standards, should be submitted with quote.

• Itemized comparison of proposed equivalents with specified product.

It is the supplier’s responsibility to prove equivalent products quoted/bid equal or exceed the quality level of the product(s) specified. All materials and construction shall meet or exceed NFPA 1971 “Standard on Protective Ensemble for Structural Fire Fighting”, latest edition. Production facility should be ISO 9001 certified for quality performance.

Exceptions to Specifications Any and all exceptions to the above specifications must be clearly stated for each heading. Use additional pages for exceptions, if necessary.

Specifications for Structural Fire Fighting 14” Pull-On Boots and Supplier Response

NFPA 1971 and NFPA 1992 Certified Certified to NFPA 1971, Standard on Protective Ensembles for Structural Firefighting and Proximity Firefighting, Current Edition for Structural Fire Fighting and NFPA 1992, Standard on Liquid Splash-Protective Ensembles and Clothing for Hazardous Materials Emergencies, Current Edition.

Comply

General Design

Exception

14 inch Pull-On athletic footwear (cement construction) boot, black flame-resistant and water-resistant leather, double-stitched leather joining seams, hi-vis yellow and silver reflective trim, leather-trimmed webbing pull straps, padded leather collar, padded leather flex joints in the shaft above vamp and heel, liquid and chemical resistant breathable bootie liner, cut-resistant and thermal protective bootie-shield liner, composite safety toe cap, composite shank, composite penetration-resistant insole barrier, molded shin guard, flame-resistant synthetic rubber molded cup outsole and toe bumper, 3D lasting board, molded composite heel counter, internal heel fit system, and a removable molded footbed as well as an additional insert for use in conjunction with the footbed.

BL129-18 Page 5

Slip Resistance Boots should exceed the minimum test values for slip resistance (average of left and right foot) as detailed below to provide superior performance in dry, wet, and frosted ice conditions. Bidders must promptly supply a Technical Services Report from a recognized independent testing laboratory upon request showing the boots bid exceed this requirement.

Test Method: SATRA TM144:2011 Slip Resistance of Footwear and Floorings Load = 500 N Dry Clay Quarry Tile: Forepart > 1.00 Heel > 1.00 Wet Clay Quarry Tile: Forepart > 0.60 Heel > 0.60 Frosted Ice -7°C Run 1: Forepart = 0.28 Heel = 0.28 Frosted Ice -7°C Run 4: Forepart > 0.12 Heel > 0.12

For maximum slip resistance each outsole should have Siping lines. Siping lines cut into flat areas open up when flexed to provide additional traction on water and ice. The boot should also include self-cleaning lugs and an omni-direction tread pattern designed for superior performance in all terrains and when working on ladders.

Specifications for Supreme Structural Fire Fighting 14” Pull-On Boots 2018 R1 06.01.18

Flexibility Boots must reach the Maximum Flex Angle of 48 degrees without exceeding the critical bending moment with a resulting stiffness index less than 10.0 as detailed below to provide maximum flexibility. Boots that do not meet this requirement shall not be acceptable. Bidders must promptly supply a Technical Services Report from a recognized independent testing laboratory upon request showing the boots bid meet this requirement.

Test Method: SATRA TM194:2004 Longitudinal stiffness of footwear

FireStorm Leather

Boots should be made from heavy-duty, flame-resistant and water-resistant full-grain cattle hide leather measuring

2.0 – 2.2 mm of thickness for durable tear and puncture resistance. Tumbled full-grain cattle hide leather should be utilized in collar and flex areas for mobility. The leather shall be chrome tanned to withstand high temperature with minimal shrinkage, re-tanned to impart water resistance and low water absorption, and finished to retain maximum breathability. Leather shall meet or exceed the following physical tests:

Water Penetration ASTM D2099 15,000 flex minimum Dynamic Water Absorption ASTM D2099 15% maximum

BL129-18 Page 6

Static Water Absorption ASTM D6015 30% maximum Slit Tearing Strength ASTM D2212 30 pound minimum Moisture Vapor Transmission ASTM D5052 350 g/meter2/24 hours minimum Flame Resistance NFPA 1971 afterflame no more than 2.0 sec, not melt or drip, no burn through

CROSSTECH® Footwear Fabric A full-height, full sock, bootie liner made from a package of Omaha lining fabric, 300g felt insulation, and CROSSTECH® moisture barrier shall be provided for a liquid resistant and breathable moisture barrier as well as thermal protection as defined by the specified NFPA standards.

Athletic Footwear (Cement) Construction Outsole For optimum flexibility, comfort, and weight reduction, the boot should include a VIBRAM® Synthetic Rubber Sculpted, Contoured Cup Outsole cemented to the bottom and sides of the upper using a 2-part cross-linking adhesive that forms a bond stronger than the materials it attaches. The outsole should be made from a flame, abrasion, oil, acid, and slip resistant compound engineered for high-traction, cold-weather resistance, and durability.

Goodyear welt or direct attach construction methods shall not be acceptable.

Bootie-Shield Liner A protective bootie-shield of KEVLAR® fiber blend stitchbonded non-woven batting weighing 4.0 oz/yd2 shall be positioned between the leather shell and the CROSSTECH® moisture barrier bootie to provide abrasion and cut resistance and additional thermal protection. Boots that do not have an additional Flame Resistant (FR) protective bootie-shield between the leather shell and the CROSSTECH® moisture barrier bootie shall not be acceptable.

Composite Safety Toe Cap The safety toe shall consist of a composite material that is lighter than steel, does not transmit heat or cold, and will spring back to shape after impact. Must exceed NFPA standards for safety. Metal toe caps shall not be acceptable.

Padded Leather Collar

The padded collar should have a rolled top edge formed by folding over the leather to help the boots slide against the pants liner and reduce the potential for the pants liner to hang up on the top of the boots as well as to reduce abrasion against the wearer’s calf.

Composite Penetration Resistant Insole Barrier Penetration resistance shall be provided by a composite insole to maximize flexibility and insulate from heat or cold transmission. Must exceed NFPA standards for safety. Metal plates shall not be acceptable.

3D Composite Lasting Board Boot uppers should be lasted to a molded and contoured dual-density lasting board with a built-in flex zone in the forefoot and a torsionally stable heel. Flat fiber board lasting boards shall not be acceptable.

Composite Shank The shank shall consist of a composite material that is lighter than steel, does not transmit heat or cold, and springs back to shape better. Metal shank shall not be acceptable.

Molded Heel Counter

Boots shall have a molded heel counter of water-resistant composite material individually molded to fit each size perfectly. Leather or fiber board heel counters shall not be acceptable.

Padded Shin Guard Boots should include a padded composite shin guard to provide extra protection when working on a ladder.

Moisture absorbing natural fiber padding shall not be acceptable.

Synthetic Rubber Toe Bumper Boots should have a molded Flame Resistant (FR) synthetic rubber toe bumper to provide abrasion resistance when crawling. The toe bumper should be cemented and 2-needle stitched to the vamp.

3M SCOTCHLITE™ Reflective Material Boots shall have flame-resistant fluorescent yellow and silver 3M SCOTCHLITE™ reflective material sewn to both sides of the shaft for added visibility.

Webbing Pull-Straps Boots should have NOMEX® webbing pull-straps with leather trim securely attached to the leather uppers by inserting into to collar seam to minimize stitching through the leather. Pull strength should be a minimum of 120 lbs when tested with a single handle.

Internal Fit System

Boots shall have an anatomical foam insert that wraps around the top and sides of the heel with an opening to fit and hold the back of the heel securely while cushioning the ankle.

3D Molded Footbeds System Boots shall have a removable urethane foam footbed. The footbeds are contoured to cradle and cushion the bottom of the foot and to provide arch support. The footbeds shall have a moisture-wicking and anti-microbial fabric top layer. A second pair of 3D molded footbeds that are thicker in the forefoot is provided with every pair for a custom fit. This thicker footbed provides a snugger fit.

Sizes

Boots must be available in Men’s full sizes 5 – 18 and half sizes 5½ – 15½ in Narrow, Medium, Wide, and X-Wide widths. Boots must also be available in a Wide Calf model in the same size range that will provide an additional 3 inches in circumference at the calf to fit those with larger calves. Boots must be available in Women’s full sizes 5 – 12 and half sizes 5½ – 11½ in Narrow, Medium, Wide, and X-Wide widths.

Resoling Service

The awarded vendor shall have resoling services available at their factory as needed.

Country of Origin

Boots should be manufactured in the United States.

Third Party Testing and Listing Program The footwear shall be tested for compliance to NFPA Standard 1971 and 1992 by a recognized independent testing lab which shall certify and list compliance to that standard. Such certification shall be denoted by the independent testing labs mark on the certification label affixed to the boots.

BL129-18 Page 9

Labels Appropriate warning label(s) shall be permanently affixed to each boot. Additionally, the label(s) shall include the following information.

Compliance to applicable NFPA Standard(s), current edition(s).

Independent Testing Lab mark Manufacturer's name Manufacturer's address Manufacturer's boot identification number Date of manufacture Size

ISO Certification/Registration The manufacturer shall be certified and registered to ISO Standard 9001 to assure a satisfactory level of quality.

Warranty

The manufacturer shall warrant these boots to be free from defects in materials and workmanship for one year when properly used and cared for.

Sizing by Vendor

The vendor shall be available to perform all sizing requirements.

PPE Record Keeping

The manufacturer should make available at no-charge, a password protected data based backed website that allows all brands of PPE assets are being recorded. The website should have the functionality to allow the manufacturer to import all of the pertinent data into the department’s account so that the initial data entry by fire department personnel is eliminated.

The website should allow for the department to use a barcode scanner, if desired, to scan the Interleaved 2 of 5 barcode found in the gear by going to the Search the Serial Number page in PPE record keeping program, and scanning the asset’s barcoded serial number.

Exceptions to Specifications Any and all exceptions to the above specifications must be clearly stated for each heading. Use additional pages for exceptions, if necessary

BID SCHEDULE

Delivery will be F.O.B. Destination to: Gwinnett County Fire Resource Management 450 Hosea Road Lawrenceville, GA 30045

Item#

Approx.

Annual Quantity

DESCRIPTION

Manufacturer and

Number

Delivery A.R.O.

Unit Price

Total Price

1.

300 Ea.

Globe Structural Fire Fighting 14” Pull on Supreme Boots or approved equivalent.

TOTAL $

*Unit prices should not exceed 2 decimal points and must include all measuring, shipping, freight and delivery charges.

Gwinnett County requires pricing to remain firm for the duration of the initial term of the contract. Failure to hold firm pricing for the initial term of the contract will be sufficient cause for Gwinnett County to declare bid non-responsive. Contract to begin in January of 2019.

Certification of Non-Collusion in Bid Preparation

Signature and Date

Gwinnett County requires pricing to remain firm for the duration of the initial term of the contract. Failure to hold firm pricing for the initial term of the contract will be sufficient cause for Gwinnett County to declare bid non-responsive.

Unless otherwise noted, quoted prices will remain firm for four (4) additional years.

If a percentage decrease will be a part of this bid, please note this in the space provided together with an explanation.

Renewal Year 1

Renewal Year 2

Renewal Year 3

Renewal Year 4

If a percentage increase will be a part of this bid, please note this in the space provided together with an explanation.

Renewal Year 1

Renewal Year 2

Renewal Year 3

Renewal Year 4 Termination for Cause: The County may terminate this agreement for cause upon ten days prior written notice to the contractor of the contractor’s default in the performance of any term of this agreement. Such termination shall be without prejudice to any of the County’s rights or remedies by law.

Termination for Convenience: The County may terminate this agreement for its convenience at any time upon 30 days written notice to the supplier. In the event of the County’s termination of this agreement for convenience, the supplier will be paid for those services actually performed. Partially completed performance of the agreement will be compensated based upon a signed statement of completion to be submitted by the supplier, which shall itemize each element of performance.

In compliance with the attached specifications, the undersigned offers and agrees, if this quote is accepted by the Board of Commissioners within sixty (60) days of the date of quote opening, to furnish any or all of the items upon which prices are quoted, at the price set opposite each item, delivered to the designated point(s) within the time specified in the quote schedule.

Legal Business Name (If your company is an LLC, you must identify all principals to include addresses and phone numbers in your submittal)

Federal Tax ID Does your company currently have a location within Gwinnett County? Yes No

Address

Representative Signature Printed Name

Telephone Number Fax Number E-mail address

BL129-18 Page 12

REFERENCES

Gwinnett County requests a minimum of three, (3) references where work of a similar size and scope has been completed.

1. Company Name

Brief Description of Items Supplied

Dates Contract in Place

Contact Person

Telephone Facsimile

E-Mail Address

2. Company Name

Dates Contract in Place

Contact Person

3. Company Name

Dates Contract in Place

Contact Person

Supplier Name

BL129-18 Page 13

BL129-18; Purchase of Leather Structural Firefighter Boots on an Annual Contract

CODE OF ETHICS AFFIDAVIT

(THIS FORM SHOULD BE FULLY COMPLETED AND RETURNED WITH

YOUR SUBMITTAL AND WILL BE REQUIRED PRIOR TO EVALUATION)

In accordance with Section 54-33 of the Gwinnett County Code of Ordinances the undersigned bidder/proposer makes the following full and complete disclosure under oath, to the best of his/her knowledge, of the name(s) of all elected officials whom it employs or who have a direct or indirect pecuniary interest in or with the bidder/proposer, its affiliates or its subcontractors:

1.

(Company Submitting Bid/Proposal)

2. (Please check one box below)

No information to disclose (complete only section 4 below)

Disclosed information below (complete section 3 & section 4 below)

3. (if additional space is required, please attach list)

Gwinnett County Elected Official Name Gwinnett County Elected Official Name

Gwinnett County Elected Official Name Gwinnett County Elected Official Name

4. Sworn to and subscribed before me this

BY: day of , 20

Authorized Officer or Agent Signature

Printed Name of Authorized Officer or Agent Notary Public

Title of Authorized Officer or Agent of Contractor (seal)

Note: See Gwinnett County Code of Ethics Ordinance EO2011, Sec. 54-33. The ordinance will be available to view in its’ entirety at www.gwinnettcounty.com

BL129-18 Page 14

STANDARD INSURANCE REQUIREMENTS

1. Statutory Workers' Compensation Insurance

(a) Employers Liability:

Bodily Injury by Accident - $100,000 each accident Bodily Injury by Disease - $500,000 policy limit Bodily Injury by Disease - $100,000 each employee

2. Commercial General Liability Insurance

(a) $500,000 limit of liability per occurrence for bodily injury and property damage

(b) The following additional coverages must apply:

* 1986 (or later) ISO Commercial General Liability Form

* Dedicated Limits per Project Site or Location (CG 25 03 or CG 25 04)

* Additional Insured Endorsement (Form B CG 20 10 with a modification for completed operations or a separate endorsement covering Completed Operations)

* Blanket Contractual Liability

* Broad Form Property Damage

* Severability of Interest

* Underground, explosion, and collapse coverage

* Personal Injury (deleting both contractual and employee exclusions)

* Incidental Medical Malpractice

* Hostile Fire Pollution Wording

3. Auto Liability Insurance

(a) $500,000 limit of liability per occurrence for bodily injury and property damage

(b) Comprehensive form covering all owned, nonowned, leased, hired, and borrowed vehicles

(c) Additional Insured Endorsement

(d) Contractual Liability

4. Umbrella Liability Insurance - $1,000,000 limit of liability

(a) The following additional coverages must apply

* Additional Insured Endorsement

* Concurrency of Effective Dates with Primary

* Blanket Contractual Liability

* Drop Down Feature

* Care, Custody, and Control - Follow Form Primary

* Aggregates: Apply Where Applicable in Primary

* Umbrella Policy must be as broad as the primary policy

5. Gwinnett County Board of Commissioners (and any applicable Authority) should be shown as an additional insured on General Liability, Auto Liability and Umbrella Liability policies.

6. The cancellation provision should provide 30 days notice of cancellation.

BL129-18 Page 15

7. Certificate Holder should read:

Gwinnett County Board of Commissioners 75 Langley Drive Lawrenceville, GA 30045-6900

8. Insurance Company, except Worker' Compensation carrier, must have an A.M. Best Rating of A-5 or higher. Certain Workers' Comp funds may be acceptable by the approval of the Risk Management Division. European markets including those based in London and domestic surplus lines markets that operate on a non-admitted basis are exempt from this requirement provided that the contractor’s broker/agent can provide financial data to establish that a market is equal to or exceeds the financial strengths associated with the A.M. Best’s rating of A-5 or better.

9. Insurance Company should be licensed to do business by the Georgia Department of Insurance.

10. Certificates of Insurance, and any subsequent renewals, must reference specific bid/contract by project name and project/bid number.

11. The Contractor shall agree to provide complete certified copies of current insurance policy (ies) or a certified letter from the insurance company (ies) if requested by the County to verify the compliance with these insurance requirements.

12. All insurance coverages required to be provided by the Contractor will be primary over any insurance program carried by the County.

13. Contractor shall incorporate a copy of the insurance requirements as herein provided in each and every subcontract with each and every Subcontractor in any tier, and shall require each and every Subcontractor of any tier to comply with all such requirements. Contractor agrees that if for any reason Subcontractor fails to procure and maintain insurance as required, all such required Insurance shall be procured and maintained by Contractor at Contractor's expense.

14. No Contractor or Subcontractor shall commence any work of any kind under this Contract until all insurance requirements contained in this Contract have been complied with and until evidence of such compliance satisfactory to Gwinnett County as to form and content has been filed with Gwinnett County. The Acord Certificate of Insurance or a preapproved substitute is the required form in all cases where reference is made to a Certificate of Insurance or an approved substitute.

15. The Contractor shall agree to waive all rights of subrogation against the County, the Board of

Commissioners, its officers, officials, employees, and volunteers from losses arising from work performed by the contractor for the county.

16. Special Form Contractors’ Equipment and Contents Insurance covering owned, used, and leased equipment, tools, supplies, and contents required to perform the services called for in the Contract.

The coverage must be on a replacement cost basis. The County will be included as a Loss Payee in this coverage for County owned equipment, tools, supplies, and contents.

17. The Contractor shall make available to the County, through its records or records of their insurer, BL129-18 Page 16 information regarding a specific claim related to any County project. Any loss run information available from the contractor or their insurer relating to a County project will be made available to the county upon their request.

18. Compliance by the Contractor and all subcontractors with the foregoing requirements as to carrying insurance shall not relieve the Contractor and all Subcontractors of their liability provisions of the Contract.

19. The Contractor and all Subcontractors are to comply with the Occupational Safety and Health Act of

1970, Public Law 91-956, and any other laws that may apply to this Contract.

20. The Contractor shall at a minimum apply risk management practices accepted by the contractors’ industry.

21. Builder's Risk Insurance or Installation Floater Insurance required on all new structures, bridges, overpasses, culverts and railroad crossings - limit at least as broad as contract amount. If the project does not involve a new structure, bridge, overpass, culvert or railroad crossing then the coverage is not needed.

Surety Bonds (If Required)

All of the surety requirements will stay the same except the Surety Company must have the same rating as item 8 above.

Rev 1/17

BL129-18 Page 17

FAILURE TO RETURN THIS PAGE MAY RESULT IN REMOVAL OF YOUR COMPANY FROM COMMODITY LISTING.

Buyer Initials: TS

IF YOU DESIRE TO SUBMIT A "NO BID" IN RESPONSE TO THIS PACKAGE, PLEASE INDICATE BY CHECKING ONE

OR MORE OF THE REASONS LISTED BELOW AND EXPLAIN.

Do not offer this product or service; remove us from your bidder's list for this item only.

Specifications too "tight"; geared toward one brand or manufacturer only.

Specifications are unclear.

Unable to meet specifications

Unable to meet bond requirements

Unable to meet insurance requirements

Our schedule would not permit us to perform.

Insufficient time to respond.

Other

SUPPLIER NAME

AUTHORIZED REPRESENTATIVE

SIGNATURE

BL129-18 Page 18

***ATTENTION***

FAILURE TO RETURN THE FOLLOWING DOCUMENTS MAY RESULT IN BID BEING DEEMED NON-RESPONSIVE

AND AUTOMATIC REJECTION:

1. FAILURE TO USE COUNTY BID SCHEDULE.

2. FAILURE TO RETURN APPLICABLE COMPLIANCE SHEETS/SPECIFICATION SHEETS.

3. FAILURE TO RETURN APPLICABLE ADDENDA.

4. FAILURE TO PROVIDE INFORMATION ON ALTERNATES OR EQUIVALENTS.

5. THE COUNTY SHALL BE THE SOLE DETERMINANT OF TECHNICALITY VS. NON-

RESPONSIVE BID.

6. FAILURE TO PROVIDE BID BOND, WHEN REQUIRED, WILL RESULT IN BID BEING

DEEMED NON-RESPONSIVE AND AUTOMATIC REJECTION. BID BONDS ARE NOT

REQUIRED ON ALL BIDS. BOND REQUIREMENTS ARE CLEARLY STATED ON THE

INVITATION TO BID. IF YOU NEED CLARIFICATION, CONTACT THE PURCHASING

ASSOCIATE. IF BONDS ARE REQUIRED, FORMS WILL BE PROVIDED IN THIS BID

DOCUMENT.

7. FAILURE TO PROVIDE CONTRACTOR AFFIDAVIT AND AGREEMENT, WHEN

REQUIRED, MAY RESULT IN BID BEING DEEMED NON-RESPONSIVE AND

AUTOMATIC REJECTION. CONTRACTOR AFFIDAVIT AND AGREEMENT IS NOT

REQUIRED ON ALL BIDS. IF YOU NEED CLARIFICATION, CONTACT THE

PURCHASING ASSOCIATE.

BL129-18 Page 19

GWINNETT COUNTY

DEPARTMENT OF FINANCIAL SERVICES – PURCHASING DIVISION

GENERAL INSTRUCTIONS FOR BIDDERS, TERMS AND CONDITIONS

I. PREPARATION OF BIDS

A. Each bidder shall examine the drawings, specifications, schedule and all instructions. Failure to do so will be at the bidder’s risk, as the bidder will be held accountable for their bid response.

B. Each bidder shall furnish all information required by the bid form or document. Each bidder shall sign the bid and print or type his or her name on the schedule. The person signing the bid must initial erasures or other changes. An authorized agent of the company must sign bids.

C. With the exception of solicitations for the sale of real property, individuals, firms and businesses seeking an award of a Gwinnett County contract may not initiate or continue any verbal or written communications regarding a solicitation with any County officer, elected official, employee or other County representative other than the Purchasing Associate named in the solicitation between the date of the issuance of the solicitation and the date of the final contract award by the Board of Commissioners. The Purchasing Director will review violations. If determined that such communication has compromised the competitive process, the offer submitted by the individual, firm or business may be disqualified from consideration for award. Solicitations for the sale of real property may allow for verbal or written communications with the appropriate Gwinnett County representative.

D. Sample contracts (if pertinent) are attached. These do NOT have to be filled out with the bid/proposal submittal, but are contained for informational purposes only. If awarded, the successful bidder(s) will be required to complete them prior to contract execution.

E. Effective, July 1, 2013 and in accordance with the Georgia Illegal Reform and Enforcement, an original signed, notarized and fully completed Contractor Affidavit and Agreement should be included with your bid/proposal submittal, if the solicitation is for the physical performance of services for all labor or service contract(s) that exceed $2,499.99 (except for services performed by an individual who is licensed pursuant to Title 26, Title 43, or the State Bar of Georgia). Failure to provide the Contractor Affidavit and Agreement with your bid/proposal submittal may result in bid/proposal being deemed non-responsive and automatic rejection.

II. DELIVERY

A. Each bidder should state time of proposed delivery of goods or services.

B. Words such as “immediate,” “as soon as possible,” etc. shall not be used. The known earliest date or the minimum number of calendar days required after receipt of order (delivery A.R.O.) shall be stated (if calendar days are used, include Saturday, Sunday and holidays in the number).

III. EXPLANATION TO BIDDERS

Any explanation desired by a bidder regarding the meaning or interpretation of the invitation for bids, drawings, specifications, etc. must be requested by the question cutoff deadline stated in the solicitation in order for a reply to reach all bidders before the close of bid. Any information given to a prospective bidder concerning an invitation for bid will be furnished to all prospective bidders as an addendum to the invitation if such information is necessary or if the lack of such information would be prejudicial to uninformed bidders. The written bid documents supersede any verbal or written communications between parties. Receipt of addendum should be acknowledged in the bid. It is the bidder’s responsibility to ensure that they have all applicable addenda prior to bid submittal. This may be accomplished via contact with the assigned Procurement Agent prior to bid submittal.

BL129-18 Page 20

IV. SUBMISSION OF BIDS

A. Bids shall be enclosed in sealed envelopes, addressed to the Gwinnett County Purchasing Office with the name of the bidder, the date and hour of opening and the invitation to bid number on the face of the envelope. Telegraphic/faxed bids will not be considered. Any addenda should be enclosed in the sealed envelopes as well.

B. ADD/DEDUCT: Add or deduct amounts indicated on the outside of the envelope are allowed and will be applied to the lump sum amount. Amount shall be clearly stated and should be initialed by an authorized company representative.

C. Samples of items, when required, must be submitted within the time specified and, unless otherwise specified by the County, at no expense to the County. Unless otherwise specified, samples will be returned at the bidder’s request and expense if items are not destroyed by testing.

D. Items offered must meet required specifications and must be of a quality, which will adequately serve the use and purpose for which intended.

E. Full identification of each item bid upon, including brand name, model, catalog number, etc. must be furnished to identify exactly what the bidder is offering. Manufacturer’s literature may be furnished.

F. The bidder must certify that items to be furnished are new and that the quality has not deteriorated so as to impair its usefulness.

G. Unsigned bids will not be considered except in cases where bid is enclosed with other documents, which have been signed. The County will determine this.

H. Gwinnett County is exempt from federal excise tax and Georgia sales tax with regard to goods and services purchased directly by Gwinnett County. Suppliers and contractors are responsible for federal excise tax and sales tax, including taxes for materials incorporated in county construction projects.

Suppliers and contractors should contact the State of Georgia Sales Tax Division for additional information.

I. Information submitted by a bidder in the bidding process shall be subject to disclosure after the public opening in accordance with the Georgia Open Records Act.

V. WITHDRAWAL OF BID DUE TO ERRORS

The bidder shall give notice in writing of his claim of right to withdraw his bid without penalty due to an error within two (2) business days after the conclusion of the bid opening procedure. Bids may be withdrawn from consideration if the price was substantially lower than the other bids due solely to a mistake therein, provided the bid was submitted in good faith, and the mistake was a clerical mistake as opposed to a judgment mistake, and was actually due to an unintentional arithmetic error or an unintentional omission of a quantity of work, labor or material made directly in the compilation of the bid, which unintentional arithmetic error or unintentional omission can be clearly shown by objective evidence drawn from inspection of original work papers, documents and material used in the preparation of the bid sought to be withdrawn. The bidder’s original work papers shall be the sole acceptable evidence of error and mistake if he elects to withdraw his bid.

If a bid is withdrawn under the authority of this provision, the lowest remaining responsive bid shall be deemed to be low bid.

No bidder who is permitted to withdraw a bid shall, for compensation, supply any material or labor or perform any subcontract or other work agreement for the person or firm to whom the contract is awarded or otherwise benefit, directly or indirectly, from the performance of the project for which the withdrawn bid was submitted.

BL129-18 Page 21

Supplier has up to forty-eight (48) hours to notify the Gwinnett County Purchasing Office of an obvious clerical error made in calculation of bid in order to withdraw a bid after bid opening. Withdrawal of bid for this reason must be done in writing within the forty-eight (48) hour period. Suppliers who fail to request withdrawal of bid by the required forty-eight (48) hours shall automatically forfeit bid bond. Bid may not be withdrawn otherwise.

Bid withdrawal is not automatically granted and will be allowed solely at Gwinnett County’s discretion.

VI. TESTING AND INSPECTION

Since tests may require several days for completion, the County reserves the right to use a portion of any supplies before the results of the tests are determined. Cost of inspections and tests of any item, which fails to meet the specifications, shall be borne by the bidder.

VII. F.O.B. POINT

Unless otherwise stated in the invitation to bid and any resulting contract, or unless qualified by the bidder, items shall be shipped F.O.B. Destination. The seller shall retain title for the risk of transportation, including the filing for loss or damages. The invoice covering the items is not payable until items are delivered and the contract of carriage has been completed. Unless the F.O.B. clause states otherwise, the seller assumes transportation and related charges either by payment or allowance.

VIII. PATENT INDEMNITY

The contractor guarantees to hold the County, its agents, officers or employees harmless from liability of any nature or kind for use of any copyrighted or uncopyrighted composition, secret process, patented or unpatented invention, articles or appliances furnished or used in the performance of the contract, for which the contractor is not the patentee, assignee or licensee.

IX. BID BONDS AND PAYMENT AND PERFORMANCE BONDS

(IF REQUIRED, FORMS WILL BE PROVIDED IN THIS DOCUMENT)

A five percent (5%) bid bond, a one hundred percent (100%) performance bond, and a one hundred percent (100%) payment bond must be furnished to Gwinnett County for any bid as required in bid package or document. Failure to submit a bid bond with the proper rating will result in the bid being deemed non-responsive. Bonding company must be authorized to do business in Georgia by the Georgia Insurance Commission, listed in the Department of the Treasury’s publication of companies holding certificates of authority as acceptable surety on Federal bonds and as acceptable reinsuring companies, and have an A.M. Best rating as stated in the insurance requirement of the solicitation. The bid bond, payment bond, and performance bond must have the proper an A.M. Best rating as stated in the bid when required in the bid package or document.

X. DISCOUNTS

A. Time payment discounts will be considered in arriving at net prices and in award of bids. Offers of discounts for payment within ten (10) days following the end of the month are preferred.

B. In connection with any discount offered, time will be computed from the date of delivery and acceptance at destination, or from the date correct invoice or voucher is received, whichever is the later date. Payment is deemed to be made for the purpose of earning the discount, on the date of the County check.

XI. AWARD

A. Award will be made to the lowest responsive and responsible bidder. The quality of the articles to be supplied, their conformity with the specifications, their suitability to the requirements of the County, and the delivery terms will be taken into consideration in making the award. The County may make

BL129-18 Page 22 such investigations as it deems necessary to determine the ability of the bidder to perform, and the bidder shall furnish to the County all such information and data for this purpose as the County may request. The County reserves the right to reject any bid if the evidence submitted by, or investigation of such bidder fails to satisfy the County that such bidder is properly qualified to carry out the obligations of the contract.

B. The County reserves the right to reject or accept any or all bids and to waive technicalities, informalities and minor irregularities in bids received.

C. The County reserves the right to make an award as deemed in its best interest, which may include awarding a bid to a single bidder or multiple bidders; or to award the whole bid, only part of the bid, or none of the bid to single or multiple bidders, based on its sole discretion of its best interest.

XII. DELIVERY FAILURES

Failure of a contractor to deliver within the time specified or within reasonable time as interpreted by the Purchasing Director, or failure to make replacement of rejected articles/services when so requested, immediately or as directed by the Purchasing Director, shall constitute authority for the Purchasing Director to purchase in the open market articles/services of comparable grade to replace the articles/services rejected or not delivered. On all such purchases, the contractor shall reimburse the County within a reasonable time specified by the Purchasing Director for any expense incurred in excess of contract prices, or the County shall have the right to deduct such amount from monies owed the defaulting contractor. Alternatively, the County may penalize the contractor one percent (1%) per day for a period of up to ten (10) days for each day that delivery or replacement is late. Should public necessity demand it, the County reserves the right to use or consume articles delivered which are substandard in quality, subject to an adjustment in price to be determined by the Purchasing Director.

XIII. COUNTY FURNISHED PROPERTY

No material, labor or facilities will be furnished by the County unless so provided in the invitation to bid.

XIV. REJECTION AND WITHDRAWAL OF BIDS

Failure to observe any of the instructions or conditions in this invitation to bid may constitute grounds for rejection of bid.

XVII. CONTRACT

Each bid is received with the understanding that the acceptance in writing by the County of the offer to furnish any or all of the commodities or services described therein shall constitute a contract between the bidder and the County which shall bind the bidder on his part to furnish and deliver the articles quoted at the prices stated in accordance with the conditions of said accepted bid. The County, on its part, may order from such contractor, except for cause beyond reasonable control, and to pay for, at the agreed prices, all articles specified and delivered.

Upon receipt of a bid package containing a Gwinnett County “Sample Contract” as part of the requirements, it is understood that the bidder has reviewed the documents with the understanding that Gwinnett County requires that all agreements between the parties must be entered into via this document. If any exceptions are taken to any part, each must be stated in detail and submitted as part of the bid. If no exceptions are stated, it is assumed that the bidder fully agrees to the provisions contained in the “Sample Contract” in its entirety.

When the contractor has performed in accordance with the provisions of this agreement, Gwinnett County shall pay to the contractor, within thirty (30) days of receipt of any department approved payment request and based upon work completed or service provided pursuant to the contract, the sum so requested, less the retainage stated in this agreement, if any. In the event that Gwinnett County fails to pay the contractor within sixty (60)

BL129-18 Page 23 days of receipt of a pay requested based upon work completed or service provided pursuant to the contract, the County shall pay the contractor interest at the rate of ½% per month or pro rata fraction thereof, beginning the sixty-first (61st) day following receipt of pay requests. The contractor’s acceptance of progress payments or final payment shall release all claims for interest on said payment.

XVI. NON-COLLUSION

Bidder declares that the bid is not made in connection with any other bidder submitting a bid for the same commodity or commodities, and that the bid is bona fide and is in all respects fair and without collusion or fraud. An affidavit of non-collusion shall be executed by each bidder. Collusion and fraud in bid preparation shall be reported to the State of Georgia Attorney General and the United States Justice Department.

XVII. DEFAULT

The contract may be canceled or annulled by the Purchasing Director in whole or in part by written notice of default to the contractor upon…