Bid Notice-RTC Building 5026 Remodel.pdf

PDF 545 KB Posted

Attached to
RTC Building 5026 Remodel (Design Services)
Solicitation number
269994A001
Issued by
Union County, Oregon

About this file

This is a Request for Proposals (RFP) issued by the Oregon Military Department for architectural and engineering design services related to the RTC Building 5026 Remodel Project located at Rees Training Center in Hermiston, Oregon. The project involves providing comprehensive architectural design services for a 5,026 square foot stick-built structure constructed in 1942, which currently houses the Billeting and Lodging Welcome Center and Reese Range Control. The scope of work encompasses two primary project criteria: HVAC system replacement with demolition and installation of new systems to meet industry standards and building codes, and asbestos abatement with siding replacement, window replacement, exterior painting, and roof repairs/replacement with a metal roofing system designed to extend the facility's usable life by 25+ years. The facility must be designed to meet federal, state, and local building codes, including compliance with the Build America, Buy America Act, DOD Unified Facilities Criteria, and Army National Guard sustainability standards. Proposals are due July 28, 2026, by 10:00 AM, with no pre-proposal conference or site access provided. The design schedule includes milestones for 30% design completion by October 15, 2026, 60% by November 15, 2026, 90% by December 15, 2026, and final design and bid package by January 27, 2026. The contract is anticipated to start in September 2026 with an initial three-year term. Award notification is estimated for August 5, 2026, with contract execution and Notice to Proceed estimated for August 21 and August 28, 2026, respectively.

The RFP requires proposers to provide a Unique Entity ID number, pass Excluded Parties List Search (EPLS) clearance as the project is federally funded, and submit financial statements demonstrating fiscal stability. Proposers must submit one original and five copies of proposals in 3-ring binders, plus one USB Flash Drive with digital copies, all sealed and addressed to the Single Point of Contact, Sam Goff (sam.a.goff@omd.oregon.gov). Technical proposals are evaluated on a maximum of 200 points based on experience with similar projects (40 points), key staff qualifications and staffing plan (40 points), project approach and proposed statement of work (60 points), ability to meet the design schedule (50 points), and experience with applicable federal, state, local, and National Guard Bureau requirements (10 points). Reference checks may add up to 75 additional points at the agency's discretion. Proposers must provide three business references from the past three years and a letter from a Certified Public Accountant regarding financial stability. The contract will be awarded as a single contract to the highest-ranking responsive and responsible proposer, with negotiations permitted on the statement of work, performance obligations, schedule, payment methodology, rates, and maximum contract amount. Proposers must maintain required insurance, comply with Oregon tax laws and pay equity requirements, and all personnel require valid government-issued photo identification in compliance with the REAL ID Act to access OMD facilities. The project is subject to federal funding, requiring compliance with all applicable federal regulations and the Infrastructure Investment and Jobs Act.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

RFP 269994A001DOJ approved 6-25-26 Page 1 of 61

State of Oregon

OREGON MILITARY DEPARTMENT

Issues the Following

REQUEST FOR PROPOSALS (“RFP”)

FOR

ARCHITECHTURAL AND ENGINEERING SERVICES

RAYMOND F. REES TRAINING CENTER (“RTC”)

BUILDING 5026 REMODEL

A PROJECT LOCATED IN SALEM, OREGON

RFP Number 269994A001

Proposal Due Date: JULY 28, 2026 by 10 AM

RFP 269994A001DOJ approved 6-25-26 Page 2 of 61

INSTRUCTIONS TO PROPOSERS:

PLEASE NOTE THE FOLLOWING:

1. PLEASE DO NOT SUBMIT YOUR OFFER ON THIS RFP INSTRUCTION FORM.

2. OFFEROR IS SOLELY RESPONSIBLE FOR COMPLYING WITH THE CONTENTS OF THIS

SOLICITATION. PLEASE READ AND FOLLOW THE INSTRUCTIONS CAREFULLY BEFORE

SUBMITTING YOUR OFFER.

3. THIS PROJECT HAS THE POTENTIAL TO EXCEED $25,000.00 AND IS FEDERALLY FUNDED:

OFFEROR MUST MEET THE FOLLOWING REQUIREMENTS AT THE TIME OF OFFER

SUBMISSION:

A. PROVIDE A UNIQUE ENTITY ID NUMBER ON YOUR OFFER:

IF YOU NEED TO OBTAIN A UNIQUE ENTITY ID NUMBER, PLEASE GO TO THE FOLLOWING

WEBSITE VIA THE LINK PROVIDED BELOW:

https://sam.gov/content/home

B. EXCLUDED PARTIES LIST SEARCH (“EPLS”) COMPLETED BY OMD:

THE CONSULTANT MUST BE CLEARED (“NO RESULTS” ON THE SEARCH) THROUGH THE

EPLS SYSTEM TO BE ALLOWED TO RECEIVE A FEDERALLY FUNDED CONTRACT. FOR

INFORMATION CONCERNING EPLS YOU MAY ACCESS THE WEBSITE VIA THE LINK

PROVIDED BELOW:

https://sam.gov/content/home

RFP 269994A001DOJ approved 6-25-26 Page 3 of 61

Table of Contents

Section 1: General Information

1 Introduction

1.1 Single Contract/Initial Contract Term

1.2 Solicitation Schedule

1.3 Definitions

1.4 Scope of Work

1.5 Single Point of Contact

1.6 OregonBuys

1.7 Pre-Proposal Conference

Section 2: Proposal Requirements

2.1 Minimum Proposal Requirements

2.2 Administrative Proposal Requirements

2.3 Technical Proposal Requirements

2.4 References

Section 3: Solicitation Process

3.1 Procurement Authority and Method

3.2 [Reserved]

3.3 Clarifications, Modifications and Protests Relating to the RFP, Contract Provisions or Specifications

3.4 Submission of Proposals

3.5 Withdrawal of Proposals

3.6 Opening of Proposals

3.7 Evaluation and Award

3.8 Public Information, Confidentiality, and Trade Secrets

3.9 Cost of Preparing Proposals

3.10 Reservation of Agency Rights

3.11 Sample Contract

3.12 No Agency Contractual Obligation

Section 4: Evaluation and Award

4.1 Evaluation Process

4.2 Evaluation of Minimum Requirements (Responsive or Non Responsive)

4.3 Evaluation of Technical Proposal (Scored)

4.4 Reference Checks for Proposer (Scored at Agency’s Discretion)

4.5 Ranking of Proposals

4.6 Award Notification and Process

Section 5: Attachments

Attachment A: Proposal Cover Sheet

Attachment B: Sample Contract

RFP 269994A001DOJ approved 6-25-26 Page 4 of 61

Section 1: GENERAL INFORMATION

Introduction / Project Owner

The National Guard is found in both the United States Constitution and the Oregon Constitution. The tradition and history of the Oregon National Guard was grounded on the basis of its mission statement: "A ready force equipped and trained to respond to any contingency. When we are needed, we are there." The Oregon Army National Guard (“ORARNG”) is the ground component of the Oregon National Guard.

The purpose of the Oregon Military Department (“OMD”, “Agency”, or “Owner”) is to administer, house, equip and train the

Oregon National Guard to act as a ready force to support the Governor during unrest or natural disaster and to act as a reserve force to the United States Air Force and the United States Army. This mission is accomplished through a combination of

Federal and State of Oregon programs and funds.

OMD manages approximately 3.3 million square feet of building area with nearly 400 buildings located at 66 sites across the

State of Oregon. Types of buildings include readiness centers, maintenance facilities, warehousing, storage, aviation facilities, administrative space, and training site facilities. These facilities support the effort to provide the state of Oregon with a well-trained and relevant soldier force capable of providing leadership and support. These facilities need to be conceptually strong in order to foster new ideas and represent our organization well to the public. These facilities need to be site specific since they impact most communities throughout Oregon and face a full spectrum of climatic and topographical variation. These facilities need to be humane and seek to enhance the experiential qualities of our users. These facilities need to be designed in a progressive manner to keep the agency relevant and to promote the message of a forward-looking organization in order to attract the most talented labor force possible. In support of these goals, OMD strives to promote the highest ideals possible along with the prudent expenditure of public funding available. The Installations Division of the

Oregon National Guard implements projects and contingency plans to minimize potential impacts from terrorism, disaster, catastrophic accidents, explosions, strikes, and similar events that could jeopardize mission effectiveness. To this end, facilities, energy and utility systems must be secure, must be able to withstand a disaster, and must be sustainable for business continuity during a disaster.

OMD is committed to constructing the highest quality buildings and infrastructures OMD can afford and expects structures that promulgate cultural leadership. In short, the three primary goals for OMD facilities can be expressed as follows: 1)

Soldier/Unit/Equipment Readiness; 2) Sustainability/Innovation; and, 3) Community Partnership. When these goals are fully expressed in its facilities, OMD has the greatest likelihood of sustained success over time. Limited capital and sustainment funds means OMD’s buildings must perform for extended periods of time with minimal maintenance. OMD requires quality in the design and construction process to ensure it can meet these requirements. OMD is interested in retaining firms capable of bringing superior design principles to bear in a sustainable manner and constructing the highest quality buildings in the region. OMD wants to ensure that tax dollars being spent on capital construction that result in cultural enrichment for its communities while also developing innovative and sustainable buildings that are ready to respond to any emergencies which arise and are capable of withstanding the test of time.

Project Summary (the “Project”)

OMD is seeking an Architect (“Consultant”) to provide architectural design services for the RTC Building 5026 Remodel

Project. Building 5026 is an approximate 5026 square foot stick-built frame structure with composition roof on wood sheeting and wood trusses. Standard sheetrock finishes on the interior with wood exterior sheeting and asbestos siding built in 1942. The building currently houses the Billeting and Lodging Welcome Center and Reese Range Control. .Building 5026 is situated on Cedar Street, approximately .10 miles north of the main gate. .

RFP 269994A001DOJ approved 6-25-26 Page 5 of 61

The RTC Building 5026 Remodel Project will be delivered in one construction package and includes the following:

Project Criteria 41240040

Replace the existing HVAC of Building 5026 (FACNO 00032) at Rees Training Center (RTC) in order to add capability.

This work is considered “repair” under the Sustainment program and will be of permanent construction to extend the usable life of the facility. The Work under this criteria includes the demolition of several old HVAC systems, the installation of a new HVAC system, and repair any additional items related to the HVAC due to deferred maintenance. The HVAC for the facility must be designed to meet Industry Standards as well as all local and State building codes.

Project Criteria 41260021

Asbestos abatement, disposal and replacement of existing siding. The continuous insulation under the existing vinyl siding will be removed and replaced. A new building wrap vapor barrier will be installed on the walls before new siding is installed.

Replacement of degraded windows to improve energy conservation. Painting of the exterior to match Cantonment scheme, Repair/replacement of both existing roofs on the building. The TPO roof has failed in several areas and has created structural issues which need repaired prior to new roof installation. The composite roof has duct penetrations that need to be sealed and repaired prior to new roof installation. Roof replacement to be metal roofing system to extend usable life exceeding another

25 years.

In addition to preparing drawings and specifications for the Projects, and as described in more detail in the Statement of

Work, the selected Consultant shall also:

A. Estimate the construction cost of the total Project, including for the separate Project Criteria

B. Develop a bid package that includes all of the Work included in both Project Criteria .

C. Submit the combined drawings and specifications to the local jurisdiction for plans review.

D. Conduct weekly meetings with the construction contractor and owner

Project Site:

Rees Training Center (RTC)

78798 Ordnance Road

Hermiston, OR 97838

Umatilla County

Security Access Requirements

All OMD facilities require valid government issued photo identification for all individuals requesting access. When applicable, the ID must be in compliance with the REAL ID Act (https://www.dhs.gov/real-id). Consultant shall make this requirement known to all personnel requiring access. Without valid photo ID entry may be denied. It is the responsibility of the Consultant to ensure Consultant and subcontractors’ staff have necessary ID to obtain entry.

Project Schedule

Design phases will be completed on a tentative schedule as shown below.

30% design Complete October 15, 2026

60% design complete November 15, 2026

90 % design complete December 15, 2026

Final design and bid package January 27, 2026

1.1 Single Contract/Initial Contract Term

Agency’s intent is to award a single contract to the successful Proposer pursuant to this RFP. The resulting contract under this RFP is anticipated to start in September 2026. The initial Contract term is estimated to be for a period of three (3) years from the date of Notice to Proceed. See Section 1.2 below and Attachment B, Exhibit E, Critical Date Schedule for details.

1.2 Solicitation Schedule

EVENT DATE and TIME

RFP 269994A001DOJ approved 6-25-26 Page 6 of 61

RFP Release – Date of Issuance June 25, 2026

RFP Questions, Requests and Protests Deadline July 8, 2026 by 10:00am

Answers to Proposer Questions July 10, 2026 (estimated)

Proposal Due Date (Closing) July 28, 2026, at 10 am

Evaluations July 29 – August 3, 2026 (estimated)

Issuance of Intent to Award Notice August 5, 2026 (estimated)

Negotiations August 10-12, 2026 (estimated)

Contract Execution August 21, 2026 (estimated)

Issuance of Notice to Proceed August 28, 2026 (estimated)

1.3 Definitions

In addition to any other terms that may be defined elsewhere in this RFP, the following terms as defined shall apply to this

RFP and to the resulting Contract, to the extent used in the Contract:

1.3.1 “Agency” or “Owner” or “OMD” means the Oregon Military Department.

1.3.2 “Consultant” means the party with which OMD contracts to perform the Services under this procurement.

1.3.3 “Contract” means the entire agreement for Services between the Consultant and the State, by and through

OMD, comprised of the provisions of the executed main contract document, and any terms and conditions contained in any exhibits, schedules, attachments, and other provisions attached to and incorporated into the main contract document, and any amendments to the final form of the contract executed by the parties.

1.3.4 “Contract Administrator” means the officer, employee, or other individual designated in Writing by OMD, by name or position description, to conduct Contract Administration of any resulting Contract in this procurement.

1.3.5 “Offer” or “Proposal” (referred to as “Quote” in OregonBuys) means the complete document of the

Proposer(s) submitted in response to this RFP, including the required forms and certifications.

1.3.6 "Proposer" (referred to as “Supplier” in OregonBuys) means the individual or entity that submits a Proposal in response to this RFP.

1.3.7 “RFP” means this Request for Proposals (referred to as “Bid Solicitation” in OregonBuys).

1.3.8 “Scope of Work” means the general character and breadth of the Services to be performed by the Consultant, the purpose and objectives of the Services, and the Agency’s expectations for the Services. Examples of expectations include, if applicable, a description of the purchase, specifications, tasks (obligations), deliverables, delivery or performance schedule, and acceptance requirements. The Scope of Work helps the prospective Proposers develop the Proposals.

1.3.9 “Statement of Work” means the specific provisions in the final resulting Contract which sets forth and defines in detail the agreed-upon Services to be performed by the Consultant, as well as the objectives, expectations, performance standards, and other obligations of the parties to the resulting Contract.

1.4 Scope of Work

The specific Services required by OMD under this RFP are more fully described in the sample Statement of Work (“SOW”) set forth in Exhibit A to the Sample Contract included as Attachment B to this RFP. See Section 4.6.5 regarding finalization of the SOW.

1.5 Single Point of Contact (“SPC”)

All questions, whether about the technical requirements of the RFP, Contract requirements, the procurement process, or any other aspect of the Project or the needed Services, must be directed only to the person identified as the SPC.

Sam Goff - CPPB

Oregon Military Department

3406 Cherry Ave NE

Salem, OR 97301

Phone: (971) 355-4167

E-mail: sam.a.goff@omd.oregon.gov

1.6 OregonBuys. This RFP is advertised as a “Bid Solicitation” in the OregonBuys web-based eProcurement system.

OregonBuys is the official repository for all documents pertaining to the RFP. Hardcopies of the RFP are not available from

OMD.

RFP 269994A001DOJ approved 6-25-26 Page 7 of 61

1.6.1 Registration Requirements

All suppliers must be registered in OregonBuys to do business with the State. Registration is free. To create a supplier account, click the blue “Register” button in the top right corner of the OregonBuys website:

https://oregonbuys.gov/bso. For registration assistance see supplier registration guidance. Proposers are responsible for ensuring that their registration information is current and correct. OMD accepts no responsibility for missing or incorrect information contained in the supplier’s registration information on OregonBuys.

Proposers unfamiliar with OregonBuys may contact Procurement Services at the Department of Administrative

Services (“DAS-PS”), 1225 Ferry St. SE - U140, Salem, OR 97301-4285; telephone (503) 378-4642. Proposers may also look for updates about OregonBuys on the website: http://procurement.oregon.gov/.

1.6.2 Explanation of Terms used in OregonBuys

1.6.2.1 “Amendment” means “Addendum” or “Addenda”, as defined in OAR 137-046-0110(1); or any form of notice associated with the solicitation, such as intent to award, cancellation, etc., as set forth in the

Amendment

1.6.2.2 “Available Date” means the issue date for this RFP in OregonBuys.

1.6.2.3 “Bid Opening Date” means “Closing” as defined in OAR 137-046-0110(5). In OregonBuys it is the deadline for submitting Quotes (Bids, Proposals or other responses) required by a Bid Solicitation.

1.6.2.4 “Bid Solicitation” means any form of solicitation: Request for Proposal, Invitation to Bid, Request for

Quote, Request for Information, etc., including notices (sole source notice, intent to participate, etc.). Each

Bid Solicitation has a separate page and ID number in OregonBuys

1.6.2.5 “Change Order” means a formal change to an existing MBPO, Release Requisition, or project-specific

Purchase Order

1.6.2.6 “Master Blanket Purchase Order” (“MBPO”) means any form of parent contract/agreement (i.e. price agreement, on-call contract, etc.) that allows for purchases/releases via an ordering instrument during the term specified in the parent contract/agreement.

1.6.2.7 “Purchase Order” means any form of project-specific contract (not awarded under an existing MBPO)

1.6.2.8 “Quote” means any form of offer submission by vendors; i.e., Bids, Technical Proposals, Price Proposals, or any other type of offer required by a Bid Solicitation

1.6.2.9 “Release Requisition” means any form of ordering instrument used under an MBPO; i.e. Purchase Order, Work Order Contract, etc.

1.6.2.10“Supplier” means any form of business entity registered in OregonBuys. Only registered suppliers are eligible to submit a Quote and enter Purchase Orders, MBPOs, or Release Requisitions pursuant to Bid

Solicitations advertised in OregonBuys.

1.6.3 Documents Outside of OregonBuys.

If an exhibit, attachment or Addendum cannot be viewed or downloaded through OregonBuys, instructions will be noted on OregonBuys on how to obtain the documents.

1.6.4 Addenda (referred to as “Amendment” in OregonBuys).

This RFP may be amended through Addenda. Addenda/modifications, if any, to this RFP will be published in

OregonBuys as “Amendment”(s). Prospective Proposers are solely responsible for checking OregonBuys

(https://oregonbuys.gov/bso/) to determine whether or not any Addenda have been issued. Addenda are incorporated into the RFP by this reference.

Any oral communications are considered unofficial and non-binding. Proposers shall rely only on written statements issued by Addenda to this RFP.

1.7 Pre-Proposal Conference and Additional Site Access

1.7.1 PREPROPOSAL CONFERENCE:

There will be NO Pre-Proposal Conference held for this RFP.

1.7.2 SITE ACCESS

RFP 269994A001DOJ approved 6-25-26 Page 8 of 61

There will be NO site access offered for this RFP.

Section 2: Proposal Requirements

Proposals must address the proposal and submission requirements set forth in this RFP and must describe how the Services will be provided. Proposals that merely offer to provide Services as stated in the RFP may be considered non-responsive and will not be further considered. The Proposal will be evaluated as described in Section 4.

2.1 Minimum Proposal Requirements

Proposal must meet the minimum proposal requirements described in the Proposal Cover Sheet, Attachment A to the

RFP, in order to be responsive under Section 4.2 of the RFP.

Proposers must submit one (1) “original” Proposal bearing original ink signatures of authorized representative(s) secured within an appropriately sized 3 ring binder that is clearly marked “original”.

Proposers must submit five (5) copies of their Proposals individually secured within additional appropriately sized 3 ring binders.

Proposers must submit one (1) USB Flash Drive containing a digital copy of its original Proposal, with each section of the Proposal saved and named as a separate file.

All signatures and information provided on the Proposal Attachments must be completed by printing in ink or typed.

Proposers must submit Proposals in a sealed box or envelope. The box or envelope must clearly identify the Proposer’s name, the Project name, the Solicitation Number, the OregonBuys Number, and be addressed to the SPC identified in

Section 1.5.

Proposals received after the Proposal due date in Section 1.2 will be rejected by OMD and returned to Proposers unopened.

Incomplete or Proposals not in substantial compliance with the RFP requirements may be deemed nonresponsive and not be considered. Proposals may not be supplemented after the Proposal due date. However, OMD may waive minor informalities and irregularities, and may seek clarification of any response that, in its sole discretion, it deems necessary or advisable.

2.2 Administrative Proposal Requirements

2.2.1 Proposal Cover Sheet.

The Proposer must complete, sign and submit the Proposal Cover Sheet (RFP - Attachment A) with its Proposal.

All Proposals must follow the format described in this Section. Proposals must respond to all elements of information requested. Proposal sections and pages must be appropriately numbered.

Proposals may use various headings, but must include at least the following headings in the following order and numbered as indicated below, followed by Proposer’s responses:

Part 1: Administrative Proposal Requirements

Part 2: Technical Proposal Requirements

2.2.2 Financial Statement/Fiscal Stability.

In order to be considered responsive under Section 4.2, Proposer must provide a financial statement and demonstrate fiscal stability. To support its demonstration of fiscal stability, Proposer must briefly describe Proposer’s experience with, and current strategies for, ensuring that the Proposer conducts business in a fiscally responsible manner and remains financially solvent through the proposed Contract term. In addition, Proposer shall:

• Identify the individuals who have the authority to financially obligate the Proposer; and

• Obtain and submit a letter from a Certified Public Accountant regarding Proposer’s financial stability and

Proposer’s ability to remain financially responsible for the duration of the project.

RFP 269994A001DOJ approved 6-25-26 Page 9 of 61

2.3 Technical Proposal Requirements

The Proposal must describe how the Proposer will meet each of the technical requirements described in the Scope of Work in

Section 1.4 of this RFP. The Proposal shall also identify key persons who shall perform the Services along with their background and expertise, Proposers Project approach, and schedule (see also Section 4.3, Evaluation of Technical Proposal).

2.4 References.

In Attachment A to this RFP, Proposers shall provide the names, addresses, telephone numbers, and contact information for three (3) customers for whom Proposer has provided, within the last three (3) years, Services generally equivalent to those described in this RFP. Agency may use references provided as part of the Proposal evaluation process as described in Section 4.

Section 3: Solicitation Process

3.1 Procurement Authority and Method

Agency is conducting this RFP pursuant to its authority under ORS 279A.050. Pursuant to ORS 279C.100 through

279C.125, OAR 137-048-0130 and OAR 137-048-0220, Agency is using the formal RFP method to procure the needed

Services for this Project (with no initial Request for Qualifications process).

3.2 Reserved

3.3 Clarifications, Modifications and Protests relating to the RFP, Contract Provisions, or Specifications

With the exception of negotiation of those Contract provisions permitted under Section 4.6.5, this procedure provides the

Proposer’s only opportunity to request any change to or protest of any requirement of the RFP, including but not limited to the solicitation process, Proposal requirements, specifications or any Contract provisions. Proposals that take exception to the requirements of the RFP, including but not limited to the solicitation process, Proposal requirements, specifications, or

Contract provisions may be deemed non-responsive and may be rejected at the sole discretion of Agency.

3.3.1 Methods of Seeking Clarifications, Modifications and Protests to the RFP, Contract Provisions, or

Specifications.

3.3.1.1 Procedure.

The only means of seeking clarifications, modifications and protests to provisions of the RFP, Contract provisions or the specifications are through a written (a) request for clarification; (b) formal submittal of a request for changes to the RFP, Contract provisions, or specifications; or (c) formal submittal of a protest of the RFP, Contract provisions, or specifications, as detailed below.

3.3.1.2 Request for Clarification.

Any Proposer requiring clarification of any provision of the RFP, Contract provisions, or specifications may submit a written request for clarification. To be considered, the request for clarification must be submitted to the SPC by the

RFP Questions, Requests and Protests deadline specified in Section 1.2 or any extension made by subsequent

Addenda.

3.3.1.3 Request for Changes to RFP, Contract Provisions, or Specifications.

Any Proposer may submit a written request for changes to the RFP, Contract provisions or specifications. To be considered, the request for changes must be submitted to the SPC by the RFP Questions, Requests and Protests deadline specified in Section 1.2 or any extension made by subsequent Addenda. The request must include the reason for requested changes, supported by factual documentation, the proposed changes, and must contain all information required by OAR 137-048-0240.

3.3.1.4 Protest of RFP, Contract Provisions, or Specifications.

Proposers may submit a written protest of the RFP, Contract provisions, or specifications. To be considered, Protests must:

3.3.1.4.1 Identify the Proposer’s name and reference the RFP number.

RFP 269994A001DOJ approved 6-25-26 Page 10 of 61

3.3.1.4.2 Contain evidence that supports the grounds on which the protest is based and specify the relief sought, including a statement of the proposed changes to the process or RFP provisions, requirements or Contract provisions that the Proposer believes will remedy the conditions upon which the protest is based.

3.3.1.4.3 Be signed by the Proposer’s authorized representative.

3.3.1.4.4 Be submitted to the SPC by the RFP Questions, Requests and Protests deadline specified in Section 1.2.

3.3.1.5 Response to Requests for Clarification or Change

Agency will respond to each properly submitted written request in accordance with OAR 137-048-0240. Where appropriate, Agency will issue revisions and clarify RFP provisions via Addenda posted on OregonBuys. Agency may also informally respond to Proposer questions. Informal responses, however, do not affect the provisions of this RFP. The RFP, Contract terms and specifications can only be changed via formal Addenda issued by

OMD.

3.3.1.6 Response to Solicitation Protests. Agency shall not consider solicitation protests that do not meet the requirements of Section 3.3.1.4. Agency shall resolve all solicitation protests in accordance with OAR 137-048-

0240. Unless this specific due date is extended by Addenda to the RFP, Agency shall not consider solicitation protests to the originally issued RFP submitted after the RFP Questions, Requests and Protests deadline specified in

Section 1.2. Please note: Late protests will not be accepted.

3.4 Submission of Proposals

Proposals must be received by the SPC no later than the Proposal due date specified in Section 1.2 at the address listed in

Section 1.5. Proposals may be delivered via U.S. Mail, or courier, or be hand-delivered. Proposals must be sent to the attention of the SPC’s name. Late, faxed or electronically transmitted Proposals will not be accepted.

SECURITY REQUIREMENTS: As noted above, all OMD facilities require valid government issued photo identification for all individuals requesting access. When applicable, the ID must be in compliance with the REAL ID Act

(https://www.dhs.gov/real-id). Consultant shall make this requirement known to all personnel requiring access. Without valid photo ID entry may be denied. It is the responsibility of the Consultant to ensure Consultant and subcontractors’ staff have necessary ID to obtain entry.

3.5 Withdrawal of Proposals

If a Proposer wishes to withdraw a submitted Proposal, it must do so prior to the Proposal due date. The Proposer shall submit a written request to withdraw, signed by the Proposer, on the Proposer’s letterhead, to the SPC.

3.6 Opening of Proposals

There will be no public opening or reading for this RFP.

3.7 Evaluation and Award

The evaluation and award process is described in Section 4.

3.8 Public Information, Confidentiality, and Trade Secrets

Proposals may be available for public inspection, subject to the Oregon Public Records Law, ORS 192.311 through 192.478, and the Public Contracting Code only after OMD has issued the notice of intent to award a contract. OMD reserves the right to publish or display publicly all Exhibits in accordance with the Oregon Public Records Law.

If a Proposer considers any part of its Proposal or protest a trade secret or otherwise exempt from disclosure under the

Oregon Public Records Law, ORS 192.311 through 192.478, the Proposer must clearly designate that portion as confidential in order to obtain protection, if any, from disclosure at the time of submission. See Oregon Revised Statutes 192.311 through

192.478, and 646.461 through 646.475. Application of the Oregon Public Records Law shall determine if the information claimed to be exempt is in fact exempt from disclosure. The State shall not be liable for release of any information when required by law or court order to do so, whether pursuant to the Oregon Public Records Law or otherwise and shall also be immune from liability for disclosure or release of information under the circumstances set out in ORS 646.473(3).

RFP 269994A001DOJ approved 6-25-26 Page 11 of 61

3.9 Cost of Preparing Proposals

All costs incurred in Proposal preparation and participation in the Proposal evaluation, Award, and Contract negotiation processes are the responsibility of the Proposer and will not be reimbursed by the Agency.

3.10 Reservation of Agency Rights

The Agency reserves all rights regarding the RFP, including, without limitation, the right to:

a. Amend, delay or cancel the RFP without liability if Agency finds it is in the best interest of the Agency to do so.

b. Reject any or all Proposals received upon finding that it is in the best interest of the Agency to do so.

c. Waive any minor informality or minor non-conformance with the provisions or procedures of the RFP, and seek clarification of any Proposal, if required.

d. Reject any Proposal that fails substantially to comply with all prescribed RFP procedures and requirements; and

e. Engage consultants by selection or procurement independent of the RFP process or any Contract or agreements under it to perform the same or similar services.

f. Forgo the evaluation process beyond responsive and responsible verification if Agency receives only one (1)

Proposal or if only a single Proposal is deemed responsive and responsible and move directly to Contract negotiation.

3.11 [RESERVED]

3.12 No Agency Contractual Obligation

Agency is not obligated as a result of the submission of a Proposal to enter into a Contract with any Proposer and has no financial obligation to any Proposer arising from this RFP.

Section 4: Evaluation and Award

4.1 Evaluation Process

4.1.1 Evaluation Overview.

Agency will conduct an evaluation of Proposals timely received and that are responsive to the RFP. The intent of this RFP is to identify a Proposal from a Proposer that has a level of specialized skill, knowledge and resources to perform the Services described in the RFP. Qualifications, performance history, expertise, knowledge and the ability to exercise sound professional judgment are primary considerations in the selection process. Agency reserves the sole right to determine the best Proposal considering the evaluation criteria set forth in this RFP.

Agency will evaluate and score all responsive and responsible Proposals on the completeness, quality, and applicability of their content in accordance with the following Sections:

4.2: Evaluation of Minimum and Administrative Proposal Requirements and Financial Statement/Fiscal

Stability (Responsive or Non-Responsive)

4.3: Evaluation of Technical Proposal (Scored)

4.4: Reference Checks for the Proposer (Responsive or Non-Responsive, or Scored, (at Agency’s discretion)

4.1.2 Evaluation Committee.

Agency will establish an evaluation committee consisting of at least three (3) experienced evaluators, to be identified and appointed by the Contract Administrator, to review, evaluate and score each Technical Proposal

Proposal independently.

4.1.3 Disqualification.

Any attempt by a Proposer to improperly influence a member of the evaluation committee during the Proposal review and evaluation process will result in that Proposal’s rejection.

4.2 Evaluation of Minimum Requirements and Financial Statement/Fiscal Stability (Responsive or Non-Responsive)

The Agency will review each Proposal on a responsive or non-responsive basis to determine if the Proposal meets the minimum proposal requirements described in Section 2.1 and the Administrative Proposal Requirements, including the

RFP 269994A001DOJ approved 6-25-26 Page 12 of 61

Financial Statement/Fiscal Stability requirements described in Section 2.2 of this RFP. Proposer’s failure to comply with the instructions or to submit a complete Proposal may result in the Proposal being deemed non-responsive. Only those Proposals determined to be responsive to the minimum requirements will be considered for further evaluation in Section 4.3. See the

Reservation of Agency Rights in Section 3.10.

4.3 Evaluation of Technical Proposal (Scored)

4.3.1 An evaluation committee of at least three (3) evaluators will review each responsive Proposal submitted. Each scoring evaluation team member will award points based on the evaluation criteria and the corresponding maximum possible points set forth below. The maximum number of Technical Proposal points possible for each Proposal is 200.

a. 40 points possible: Proposer’s experience providing similar projects of size and nature.

b. 40 Points possible: Proposer’s key staff experience, qualifications, and staffing plan.

c. 60 Points possible: Proposer’s project approach and proposed statement of Work for Project. Proposer shall develop a proposed Statement of Work using Exhibit A of the Sample Contract. The Proposed Statement of Work shall identify all work and services described in the RFP, and shall address all design considerations and requirements described therein.

d. 50 Points possible: Proposer’s ability to meet Design Schedule (See Section 1, Project Schedule).

e. 10 Points possible: Proposer’s Experience and knowledge of Federal, State, local, and National Guard Bureau

(“NGB”) requirements and regulations and jurisdictional requirements applicable to the Project.

4.3.2 Calculation of Average Score. The sum of all scores awarded to each Proposer will be divided by the total number of Evaluation Committee Members to compute an average score for each Proposer. Proposers’ average scores will be used to rank proposals as described in Section 4.5 (Ranking of Proposals).

4.4 Reference Checks for Proposer (Responsive/Non-Responsive or Scored (at Agency’s discretion)

Proposer shall provide references that can rate Proposer’s performance in these categories:

a. Budget (up to 5 points)

b. Schedule (up to 5 points)

c. Performance of Work (up to 5 points)

d. Communication (up to 5 points)

e. Quality of Deliverables (up to 5 points)

If the Agency, at its discretion, opts to score references, a non-scoring evaluation committee member will evaluate the references using a scale of 0 to 5, with 5 being the highest score for each reference category. Each Proposer may receive up to a maximum of 75 points from the evaluation of provided references (25 points per reference contacted).

The non-scoring committee member will attempt to contact each reference given for a maximum of three (3) references. The committee member may make up to three (3) attempts to contact each of the reference sources. These attempts will be made during normal business hours and will be conducted via telephone. If the three (3) attempts are unsuccessful, the Proposer will receive zero (0) points for that reference source.

Each reference that is contacted will be asked questions from the categories above.

Agency reserves the right to request references in addition to those provided by Proposer, to investigate any references whether or not furnished by Proposer, and to otherwise investigate the past performance of any Proposer in any manner the

Agency determines is necessary. Agency may postpone the award or execution of any resulting Contract, after the announcement of the apparent successful Proposer, in order to complete its investigation.

4.5 Ranking of Proposals

A Proposer’s maximum possible score is 200 points, unless the Agency opts to check references, in which case a Proposer’s

Technical Proposal score will be combined with its reference score (maximum 75) to arrive at a maximum total cumulative score of 275. The highest total score will determine the apparent Successful Proposer upon review by the Contract

Administrator.

RFP 269994A001DOJ approved 6-25-26 Page 13 of 61

4.6 Award Notification and Process

4.6.1 Successive Selection and Rejection.

Agency will provide a written tentative award notice (the “Intent-to-Award Notice”) to the highest-ranking Proposer and will provide a copy of the Intent-to-Award Notice to all Proposers by posting a copy of this Notice on the

OregonBuys system. Agency will enter into Contract negotiations with the highest-ranking Proposer on the

Contract terms listed in Section 4.6.5. Final award, however, will be contingent upon successful negotiation of a final contract within fourteen (14) calendar days of the announcement of tentative award or within such longer period that the Agency determines is reasonable under the circumstances. Agency may terminate negotiations with the highest-ranking Proposer if the parties fail to execute a Contract within this negotiation period or such later date as Agency may authorize. In accordance with Section 4(f) of OAR 137-048-0220 – Formal Selection Procedure, Agency may then enter into negotiations with the second ranked Proposer, and if necessary, the third ranked

Proposer, and so on. Upon successful negotiation of terms, the successful Proposer will be required to enter into the

State’s Standard Professional Services Contract in substantially the form set forth in the Sample Contract in

Attachment B to this RFP, subject to Section 4.6.5 below.

4.6.2 Award Protests.

A Proposer who claims to have been adversely affected or aggrieved by the selection of the highest ranked Proposer may protest the selection by submitting, within five (5) calendar days after the date of the Intent to Award Notice a written, signed protest by email, courier, or by hand-delivery to the SPC. Agency will not consider a protest submitted after this deadline. Protests must comply with and will be resolved pursuant to OAR 137-048-0240.

Faxed protests will not be accepted.

4.6.3 [RESERVED]

4.6.4 Insurance Certification.

The apparent successful Proposer must provide proof of the required insurance described in the Sample Contract

(Attachment B) to Agency within fourteen (14) calendar days of the Intent to Award Notice or such longer period that the Agency determines is reasonable under the circumstances. Failure to present the required documents within

Agency determined time period may result in Proposal rejection. Proposers are encouraged to consult their insurance agent(s) about the insurance requirements contained in the RFP prior to proposal submission.

4.6.5 Sample Contract; Negotiation.

If Agency does not cancel the RFP after it receives the results of the scoring and ranking for each Proposer, the apparent successful Proposer will be asked to sign a Contract substantially in the form that is attached to the RFP as the Attachment B - Sample Contract (as well as the SOW provisions referenced in Section 1.4 of the RFP and incorporated as Exhibit A of the Sample Contract).

The final form of the SOW that will be included as Exhibit A to any Contract resulting from this RFP will be finalized during negotiations of the final Contract by the parties, but must be based on the sample SOW.

Unless an amendment has modified or reserved the right to negotiate any terms and conditions contained in the

Sample Agreement or exhibits thereto, Agency will not negotiate any term or condition after the solicitation protest deadline, except as to:

(A) The Statement of Work, including the specific scope of Related Services to be provided by the Consultant;

(B) The Consultant’s performance obligations and performance schedule; and

(C) Payment methodology, Consultant’s rates and number of hours, and a maximum amount payable to the

Consultant.

The provisions included in Attachment B, other than those identified above, are not subject to negotiation.

4.6.6 Pay Equity Certification.

Within fourteen (14) calendar days of the Intent to Award Notice, or such longer period that the Agency determines is reasonable under the circumstances, the apparent successful Proposer must submit to Agency a true and correct copy of

RFP 269994A001DOJ approved 6-25-26 Page 14 of 61 an unexpired Pay Equity Compliance Certificate, issued to the Proposer by the Oregon Department of Administrative

Services if the Contract value exceeds $500,000 and the Proposer employs 50 or more full-time workers.

Section 5: Attachments

Attachment A – Proposal Cover Sheet

Attachment B – Sample Contract

All Attachments and Exhibits thereto are incorporated by reference herein.

RFP 269994A001DOJ approved 6-25-26 Page 15 of 61

RFP ATTACHMENT A

Proposal Cover Sheet

RFP 269994A001

Proposer Information

Organization Name: __________________________________________________________

Primary Contact Person: ______________________ Title: ____________________________

Address: ____________________________________________________________________

City, State, Zip: _____________________________________UNIQUE ENTITY ID#____________________

Telephone: _______________ Mobil: _______________ Federal Tax ID#__________________

Name and title of the person(s) authorized to represent the Proposer in any negotiations and sign any Contract(s) that may result:

Name: _______________________________Title: ___________________________________

Minimum Proposal Requirements:

• Include current resumes for each of the Proposer’s Key Persons.

• -Meets all Minimum Proposal and Administrative Proposal Requirements described in Sections 2.1 and 2.2

• Addresses all Technical Proposal Requirements described in Section 2.3, including but not limited to Section 1.4, Scope of Work.

Regarding Section 4.5, Reference Checks for the Proposer’s Company, provide at least three (3) business or customer references with telephone numbers (please verify numbers) for the organization. Business references must be able to verify your business history and relevant experience.

Business or Customer Reference #1

Name of Organization: ___________________________________________________

Address: _______________________________________________________________

City: ___________________________________

State: ____________Zip: __________

Name of contact person: __________________________________________________

Phone number: _________________________________________________________

Number of years your organization has served this client: ___________years.

Describe the services, for example, products, type of services, unique challenges, customer service enhancements, etc.:

RFP 269994A001DOJ approved 6-25-26 Page 16 of 61

Business or Customer Reference #2

Address: _______________________________________________________________

City:___________________________________ State: ____________Zip: __________

Name of contact person: __________________________________________________

Phone number: _________________________________________________________

Number of years your organization has served this client: ___________years.

Describe the services, for example, products, type of services, unique challenges, customer service enhancements, etc.:

Business or Customer Reference #3

Address: _______________________________________________________________

City:___________________________________ State: ____________Zip: __________

Name of contact person: __________________________________________________

Phone number: _________________________________________________________

Number of years your organization has served this client: ___________years.

Describe the services, for example, products, type of services, unique challenges, customer service enhancements, etc.:

Representations, Attestations, and Certifications: The undersigned further acknowledges, attests and certifies individually and on behalf of the Proposer that:

1. No attempt has been made or shall be made by the Proposer to induce any other person or organization to submit or not submit a Proposal.

2. Information included in this Proposal must remain valid for one hundred and twenty (120) days after the Proposal

Closing or until a Contract is executed.

3. The undersigned recognizes that this is a public document and open to public inspection pursuant to applicable statutory, regulatory, and other legal requirements.

4. The Proposer acknowledges receipt of all Addenda (Amendment(s) in OregonBuys) issued under the RFP.

SOLICITATION ADDENDA (AMENDMENTS ON OREGONBUYS):

No. to No. Inclusive.

5. The Proposer has not discriminated and will not discriminate in its employment practices with regard to race, creed, age, religious affiliation, sex, disability, sexual orientation or national origin; Proposer has not discriminated and will not discriminate against a subcontractor in the awarding of a subcontract because the subcontractor is: (a) a minority, women or emerging small business enterprise certified under ORS 200.055; or (b) a business enterprise that is owned or controlled by or that employs a disabled veteran, as defined in ORS 408.225.

6. Proposer has a written policy and practice that meets the requirements described in 279A.112 for preventing sexual harassment, sexual assault and discrimination against employees who are members of a “protected class,” as that term is defined in subsection (1) (b). A Proposer’s policy and practice must include, but not be limited to, giving employees a written notice of the policy that both prohibits and prescribes disciplinary measures for conduct that constitutes sexual harassment, sexual assault, or unlawful discrimination.

7. The Proposer, acting through its authorized representative, has read and understands all requirements of the RFP, including any instructions, Specifications, and terms and conditions contained within the RFP and all Addenda, if any.

8. The Proposer agrees to and shall comply with, all requirements, specifications and terms and conditions contained within the RFP, including all Addenda, if any; by Proposal submission, Proposer agrees to be bound by the Contract terms and conditions in Attachment B to this RFP and as modified by Addendum, except for those terms and conditions that OMD has reserved for negotiation in the RFP.

RFP 269994A001DOJ approved 6-25-26 Page 17 of 61

9. The Proposal submitted is in response to the specific language contained in the RFP, and Proposer has made no assumptions based upon either (a) verbal or written statements not contained in the RFP, or (b) any previously issued

RFP, if any.

10. The Proposer agrees that if awarded the Contract, Proposer must be fully authorized to do business in the State of

Oregon and licensed to perform the Services at the time of the award.

11. The Proposer will comply with all Pay Equity training requirements:

a. All contractors are required to comply with the Pay Equity law, ORS 652.220 https://www.oregonlegislature.gov/bills_laws/ors/ors652.html.

b. The Oregon Department of Administrative Services provides Pay Equity training information at:

https://www.oregon.gov/das/procurement/pages/payequity.aspx

c. Suppliers with a contract valued at $500,000 or more and that have 50 or more employees are required to take the training and submit a certificate as proof before they may be awarded a contract or price agreement.

12. The Proposer is not in violation of any Oregon Tax Laws. For purposes of this certification, "Oregon tax laws" means a state tax imposed by ORS 320.005 to 320.150 and 403.200 to 403.250, ORS Chapters 118, 314, 316, 317, 318, 321 and

323; and local taxes administered by the Oregon Department of Revenue under ORS 305.620.

13. Collusion

A Proposer submitting a Proposal hereby certifies that no officer, agent or employee of the State has a pecuniary interest in this Proposal; that the Proposal is made in good faith without fraud, collusion or connection of any kind with any other

Proposer and that the Proposer is competing solely in its own behalf without connection with, or obligation to, any undisclosed person or firm.

14. Oregon False Claims Act

Proposer certifies that it understands that any statement or representation contained in or attached to its Proposal, and any statement, representation, or application the Proposer may submit under any contract that may be awarded under this

RFP, that constitutes a “claim” (as defined by the Oregon False Claims Act, ORS 180.750(1)), will be subject to the

Oregon False Claims Act, ORS 180.750 to 180.785, and to any liabilities or penalties associated with the making of a false claim under that Act.

15. Recycled Products Certification

Vendors must use recycled products to the maximum extent economically feasible in the performance of the Contract

Services set forth in this RFP.

16. Authorized Agencies must use, or require persons with whom they Contract with, to use in the performance of the

Contract Services, to the maximum extent economically feasible, recycled paper products as well as other recycled plastic resin products. (ORS 279B.270 (1) (e)).

17. “Recycled paper” means a paper product with not less than fifty percent of its fiber weight consisting of secondary waste materials; or twenty-five percent of its fiber weight consisting of post-consumer waste. (ORS 279A.010 (1)(gg)).

18. ORS 279A.010 (1) (ii) provides as follows: "'Recycled product' means all materials, goods and supplies, not less than 50 percent of the total weight of which consists of secondary and post-consumer waste with not less than 10 percent of total weight consisting of post-consumer waste. 'Recycled product' also includes any product that could have been disposed of as a solid waste, having completed its life cycle as a consumer item, but otherwise is refurbished for reuse without substantial alteration of the product's form."

19. ORS 279A.010(1)(u) provides as follows: "Post-consumer waste” means a finished material which would normally be disposed of as solid waste, having completed its life cycle as a consumer item. 'Post-consumer waste' does not include manufacturing waste."

20. ORS 279A.010(1)(jj) provides as…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .