BEP-RFQ-16-0768.pdf

REQUEST FOR QUOTE

BEP-RFQ-16-0768

Replenishment of Industrial Gas Cylinders

Table of Contents Section Description Page Numbers

I Pricing Schedule 2-24 II Performance Work Statement 25-30 III Special Requirements 31-37 IV Clauses 38-45 V Attachments 46 VI Certifications 47-60 VII Instructions to Offerors 61-65 VIII Evaluation Factors for Award 66-67

SECTION I – PRICING SCHEDULE

I. AUTHORITY

A. This Blanket Purchase Agreement (BPA) is established under the authority of Subpart FAR 13.303, Blanket Purchase Agreements.

B. The purpose of this BPA is to provide replenishment of industrial gas cylinder services.

The applicable North American Industry Classification System (NAICS) is 325120, Industrial Gas Manufacturing. The Size Standard is 1000.

C. The contractor shall comply with all terms and conditions under this BPA and BPA Calls “hereafter referred to as Calls” issued against the BPA. The terms and conditions in this BPA apply to all Calls placed pursuant to it. In the event of an inconsistency between the provisions of the BPA and Calls, the provisions of this BPA will take precedence.

II. BLANKET PURCAHSE AGREEMENT LINE ITEM NUMBER STRUCTURE

A. BPA Line Item Numbers will be established on each Call that is placed against this

BPA. All pricing shall be in accordance with contractor’s pricing in paragraph III, Pricing of this Section.

B. The prices quoted under this BPA will undergo annual review by the Contracting

Officer.

III. PRICING

Year 1 Pricing Schedule: 15 August 2016 – 14 August 2017

Industrial Gas Cylinder Description and Consumption Data

Currency Manufacturing

(DCF)

Type of Gas Cylinder Size

Grade Delivery Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Engraving Nitrogen Approx. 57.0 in Approx. 29.0 in 5 (N2>99.997%) Every 2 weeks 12 312

Engraving (Plate Manufacturing) Acetylene 55.0 in 9.0 in Grade 4 or D < 1 tank a year 1 1 Engraving (Plate Manufacturing) Oxygen 38.0 in 9.0 in Grade 4 or D < 1 tank a year 1 1

Facilities Support (DCF) Type of Gas

Cylinder Size Grade Delivery

Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Sheet Metal Shop Argon 61.0 in 9.5 in Industrial Every 2 weeks 2 52

Sheet Metal Shop Oxygen 57.0 in 9.5 in Industrial Every 4 months 1 3

Sheet Metal Shop Acetylene 15.0 in 4.0 in Industrial Every 3 months 2 8

Sheet Metal Shop 75/25

Argon/Oxygen 61.0 in 9.5 in Industrial Every 2 weeks 2 52

Power Plant Acetylene MC Tank 10 cuft 15.0 in 4.0 in Industrial

Every 2 weeks 1 26

Power Plant Acetylene B Tank 40 cuft 23.0 in 9.0 in Industrial

Every 2 weeks 2 52

Power Plant Oxygen R Tank

20 cuft 14.0 in 5.25 in Industrial Every 2 weeks 2 52

Power Plant Nitrogen RR Tank 40 cuft 19.0 in 5.25 in Industrial

Every 2 weeks 2 52

Power Plant Nitrogen Tank

125 cuft 48.0 in 7.0 in Industrial Every 2 weeks 1 26

Power Plant R-22 16.0 in 9.0 in Every 12 months 1 1

Power Plant R-134a 16.0 in 9.0 in Every 12 months 1 1

Power Plant R-502 16.0 in 9.0 in Every 12 months 1 1

Power Plant R-404a 16.0 in 9.0 in Every 12 months 2 2

Cylinder Size Grade Delivery

Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Power Plant R-410a 16.0 in 9.0 in Every 12 months 2 2

Power Plant R-407c 16.0 in 9.0 in Every 12 months 1 1

Recovery Tank - 30lbs Refrigerant 18.0 in 9.0 in

Every 12 months 10 10

Recovery Tank - 30lbs Refrigerant 20.0 in 12.0 in

Every 12 months 10 10

Quality Operations

(DCF)

Type of Gas Cylinder Size

Grade Delivery Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Used in 605-5A for XRF (2-3 tanks/Year) Argon 55.0 in 9.0 in

Ultra 10% Methane/90%

Argon Every 3 months 1 4

Used in 205-13A:

cat. #UN1072 (3- 4 tanks/Year Oxygen 55.0 in 9.0 in N/A

Every 3 months 1 4

Used in 205-13A (16-20 tanks/Year) Nitrogen 60.0 in 9.0 in Ultra-High Purity

Every 2 weeks 1 26

Currency Manufacturing

(WCF)

Type of Gas Cylinder Size

Grade Delivery Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

"T" 332cft.

UN1006 Argon 55.0 in 9.3 in Industrial

Every 2 weeks 1 26

"K" 248cft.

UN1072 Oxygen 51.0 in 9.0 in Industrial

Every 2 weeks 1 26

"S" 195cft.

UN1956

Argon / Carbon Dioxide 46.0 in 7.4 in Industrial

Every 2 weeks 2 52

"4" 125cft.

UN1001 Acetylene 39.0 in 8.0 in Industrial

Every 2 weeks 1 26

"S" 195cft.

UN1066 Nitrogen 46.0 in 7.4 in Industrial

Every 2 weeks 1 26

Yearly Unit Price

Emergency Delivery Surge Charge for both locations NTE

Year 2 Pricing Schedule: 15 August 2017 – 14 August 2018

Industrial Gas Cylinder Description and Consumption Data

Currency Manufacturing

(DCF)

Type of Gas Cylinder Size

Grade Delivery Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Engraving Nitrogen Approx. 57.0 in Approx. 29.0 in 5 (N2>99.997%) Every 2 weeks 12 312

Engraving (Plate Manufacturing) Acetylene 55.0 in 9.0 in Grade 4 or D < 1 tank a year 1 1 Engraving (Plate

Cylinder Size Grade Delivery

Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Sheet Metal Shop Argon 61.0 in 9.5 in Industrial Every 2 weeks 2 52

Sheet Metal Shop Oxygen 57.0 in 9.5 in Industrial Every 4 months 1 3

Sheet Metal Shop Acetylene 15.0 in 4.0 in Industrial Every 3 months 2 8

Sheet Metal Shop 75/25

Argon/Oxygen 61.0 in 9.5 in Industrial Every 2 weeks 2 52

Power Plant Acetylene MC Tank 10 cuft 15.0 in 4.0 in Industrial

Every 2 weeks 1 26

Power Plant Acetylene B Tank 40 cuft 23.0 in 9.0 in Industrial

Every 2 weeks 2 52

Power Plant Oxygen R Tank

20 cuft 14.0 in 5.25 in Industrial Every 2 weeks 2 52

Power Plant Nitrogen RR Tank 40 cuft 19.0 in 5.25 in Industrial

Every 2 weeks 2 52

Power Plant Nitrogen Tank

125 cuft 48.0 in 7.0 in Industrial Every 2 weeks 1 26

Power Plant R-22 16.0 in 9.0 in Every 12 months 1 1

Power Plant R-134a 16.0 in 9.0 in Every 12 months 1 1

Power Plant R-502 16.0 in 9.0 in Every 12 months 1 1

Power Plant R-404a 16.0 in 9.0 in

Cylinder Size Grade Delivery

Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Power Plant R-410a 16.0 in 9.0 in Every 12 months 2 2

Power Plant R-407c 16.0 in 9.0 in Every 12 months 1 1

Recovery Tank - 30lbs Refrigerant 18.0 in 9.0 in

Every 12 months 10 10

Recovery Tank - 30lbs Refrigerant 20.0 in 12.0 in

Every 12 months 10 10

Quality Operations

(DCF)

Type of Gas Cylinder Size

Grade Delivery Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Used in 605-5A for XRF (2-3 tanks/Year) Argon 55.0 in 9.0 in

Ultra 10% Methane/90%

Argon Every 3 months 1 4

Used in 205-13A:

cat. #UN1072 (3- 4 tanks/Year Oxygen 55.0 in 9.0 in N/A

Every 3 months 1 4

Used in 205-13A (16-20 tanks/Year) Nitrogen 60.0 in 9.0 in Ultra-High Purity

(WCF)

Type of Gas Cylinder Size

Grade Delivery Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

"T" 332cft.

UN1006 Argon 55.0 in 9.3 in Industrial

Every 2 weeks 1 26

"K" 248cft.

UN1072 Oxygen 51.0 in 9.0 in Industrial

Every 2 weeks 1 26

"S" 195cft.

UN1956

Argon / Carbon Dioxide 46.0 in 7.4 in Industrial

Every 2 weeks 2 52

"4" 125cft.

UN1001 Acetylene 39.0 in 8.0 in Industrial

Every 2 weeks 1 26

"S" 195cft.

UN1066 Nitrogen 46.0 in 7.4 in Industrial

Every 2 weeks 1 26

Yearly Unit

Year 3 Pricing Schedule: 15 August 2018 – 14 August 2019

Currency Manufacturing

(DCF)

Type of Gas Cylinder Size

Grade Delivery Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Engraving Nitrogen Approx. 57.0 in Approx. 29.0 in 5 (N2>99.997%) Every 2 weeks 12 312

Engraving (Plate Manufacturing) Acetylene 55.0 in 9.0 in Grade 4 or D < 1 tank a year 1 1 Engraving (Plate

Cylinder Size Grade Delivery

Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Sheet Metal Shop Argon 61.0 in 9.5 in Industrial Every 2 weeks 2 52

Sheet Metal Shop Oxygen 57.0 in 9.5 in Industrial Every 4 months 1 3

Sheet Metal Shop Acetylene 15.0 in 4.0 in Industrial Every 3 months 2 8

Sheet Metal Shop 75/25

Argon/Oxygen 61.0 in 9.5 in Industrial Every 2 weeks 2 52

Power Plant Acetylene MC Tank 10 cuft 15.0 in 4.0 in Industrial

Every 2 weeks 1 26

Power Plant Acetylene B Tank 40 cuft 23.0 in 9.0 in Industrial

Every 2 weeks 2 52

Power Plant Oxygen R Tank

20 cuft 14.0 in 5.25 in Industrial Every 2 weeks 2 52

Power Plant Nitrogen RR Tank 40 cuft 19.0 in 5.25 in Industrial

Every 2 weeks 2 52

Power Plant Nitrogen Tank

125 cuft 48.0 in 7.0 in Industrial Every 2 weeks 1 26

Power Plant R-22 16.0 in 9.0 in Every 12 months 1 1

Power Plant R-134a 16.0 in 9.0 in Every 12 months 1 1

Power Plant R-502 16.0 in 9.0 in Every 12 months 1 1

Power Plant R-404a 16.0 in 9.0 in

Cylinder Size Grade Delivery

Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Power Plant R-410a 16.0 in 9.0 in Every 12 months 2 2

Power Plant R-407c 16.0 in 9.0 in Every 12 months 1 1

Recovery Tank - 30lbs Refrigerant 18.0 in 9.0 in

Every 12 months 10 10

Recovery Tank - 30lbs Refrigerant 20.0 in 12.0 in

Every 12 months 10 10

Quality Operations

(DCF)

Type of Gas Cylinder Size

Grade Delivery Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Used in 605-5A for XRF (2-3 tanks/Year) Argon 55.0 in 9.0 in

Ultra 10% Methane/90%

Argon Every 3 months 1 4

Used in 205-13A:

cat. #UN1072 (3- 4 tanks/Year Oxygen 55.0 in 9.0 in N/A

Every 3 months 1 4

Used in 205-13A (16-20 tanks/Year) Nitrogen 60.0 in 9.0 in Ultra-High Purity

(WCF)

Type of Gas Cylinder Size

Grade Delivery Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

"T" 332cft.

UN1006 Argon 55.0 in 9.3 in Industrial

Every 2 weeks 1 26

"K" 248cft.

UN1072 Oxygen 51.0 in 9.0 in Industrial

Every 2 weeks 1 26

"S" 195cft.

UN1956

Argon / Carbon Dioxide 46.0 in 7.4 in Industrial

Every 2 weeks 2 52

"4" 125cft.

UN1001 Acetylene 39.0 in 8.0 in Industrial

Every 2 weeks 1 26

"S" 195cft.

UN1066 Nitrogen 46.0 in 7.4 in Industrial

Every 2 weeks 1 26

Yearly Unit

Year 4 Pricing Schedule: 15 August 2019 – 14 August 2020

Currency Manufacturing

(DCF)

Type of Gas Cylinder Size

Grade Delivery Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Engraving Nitrogen Approx. 57.0 in Approx. 29.0 in 5 (N2>99.997%) Every 2 weeks 12 312

Engraving (Plate Manufacturing) Acetylene 55.0 in 9.0 in Grade 4 or D < 1 tank a year 1 1 Engraving (Plate

Cylinder Size Grade Delivery

Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Sheet Metal Shop Argon 61.0 in 9.5 in Industrial Every 2 weeks 2 52

Sheet Metal Shop Oxygen 57.0 in 9.5 in Industrial Every 4 months 1 3

Sheet Metal Shop Acetylene 15.0 in 4.0 in Industrial Every 3 months 2 8

Sheet Metal Shop 75/25

Argon/Oxygen 61.0 in 9.5 in Industrial Every 2 weeks 2 52

Power Plant Acetylene MC Tank 10 cuft 15.0 in 4.0 in Industrial

Every 2 weeks 1 26

Power Plant Acetylene B Tank 40 cuft 23.0 in 9.0 in Industrial

Every 2 weeks 2 52

Power Plant Oxygen R Tank

20 cuft 14.0 in 5.25 in Industrial Every 2 weeks 2 52

Power Plant Nitrogen RR Tank 40 cuft 19.0 in 5.25 in Industrial

Every 2 weeks 2 52

Power Plant Nitrogen Tank

125 cuft 48.0 in 7.0 in Industrial Every 2 weeks 1 26

Power Plant R-22 16.0 in 9.0 in Every 12 months 1 1

Power Plant R-134a 16.0 in 9.0 in Every 12 months 1 1

Power Plant R-502 16.0 in 9.0 in Every 12 months 1 1

Power Plant R-404a 16.0 in 9.0 in

Cylinder Size Grade Delivery

Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Power Plant R-410a 16.0 in 9.0 in Every 12 months 2 2

Power Plant R-407c 16.0 in 9.0 in Every 12 months 1 1

Recovery Tank - 30lbs Refrigerant 18.0 in 9.0 in

Every 12 months 10 10

Recovery Tank - 30lbs Refrigerant 20.0 in 12.0 in

Every 12 months 10 10

Quality Operations

(DCF)

Type of Gas Cylinder Size

Grade Delivery Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Used in 605-5A for XRF (2-3 tanks/Year) Argon 55.0 in 9.0 in

Ultra 10% Methane/90%

Argon Every 3 months 1 4

Used in 205-13A:

cat. #UN1072 (3- 4 tanks/Year Oxygen 55.0 in 9.0 in N/A

Every 3 months 1 4

Used in 205-13A (16-20 tanks/Year) Nitrogen 60.0 in 9.0 in Ultra-High Purity

(WCF)

Type of Gas Cylinder Size

Grade Delivery Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

"T" 332cft.

UN1006 Argon 55.0 in 9.3 in Industrial

Every 2 weeks 1 26

"K" 248cft.

UN1072 Oxygen 51.0 in 9.0 in Industrial

Every 2 weeks 1 26

"S" 195cft.

UN1956

Argon / Carbon Dioxide 46.0 in 7.4 in Industrial

Every 2 weeks 2 52

"4" 125cft.

UN1001 Acetylene 39.0 in 8.0 in Industrial

Every 2 weeks 1 26

"S" 195cft.

UN1066 Nitrogen 46.0 in 7.4 in Industrial

Every 2 weeks 1 26

Yearly Unit

Year 5 Pricing Schedule: 15 August 2020 – 14 August 2021

Currency Manufacturing

(DCF)

Type of Gas Cylinder Size

Grade Delivery Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Engraving Nitrogen Approx. 57.0 in Approx. 29.0 in 5 (N2>99.997%) Every 2 weeks 12 312

Engraving (Plate Manufacturing) Acetylene 55.0 in 9.0 in Grade 4 or D < 1 tank a year 1 1 Engraving (Plate

Cylinder Size Grade Delivery

Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Sheet Metal Shop Argon 61.0 in 9.5 in Industrial Every 2 weeks 2 52

Sheet Metal Shop Oxygen 57.0 in 9.5 in Industrial Every 4 months 1 3

Sheet Metal Shop Acetylene 15.0 in 4.0 in Industrial Every 3 months 2 8

Sheet Metal Shop 75/25

Argon/Oxygen 61.0 in 9.5 in Industrial Every 2 weeks 2 52

Power Plant Acetylene MC Tank 10 cuft 15.0 in 4.0 in Industrial

Every 2 weeks 1 26

Power Plant Acetylene B Tank 40 cuft 23.0 in 9.0 in Industrial

Every 2 weeks 2 52

Power Plant Oxygen R Tank

20 cuft 14.0 in 5.25 in Industrial Every 2 weeks 2 52

Power Plant Nitrogen RR Tank 40 cuft 19.0 in 5.25 in Industrial

Every 2 weeks 2 52

Power Plant Nitrogen Tank

125 cuft 48.0 in 7.0 in Industrial Every 2 weeks 1 26

Power Plant R-22 16.0 in 9.0 in Every 12 months 1 1

Power Plant R-134a 16.0 in 9.0 in Every 12 months 1 1

Power Plant R-502 16.0 in 9.0 in Every 12 months 1 1

Power Plant R-404a 16.0 in 9.0 in

Cylinder Size Grade Delivery

Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Power Plant R-410a 16.0 in 9.0 in Every 12 months 2 2

Power Plant R-407c 16.0 in 9.0 in Every 12 months 1 1

Recovery Tank - 30lbs Refrigerant 18.0 in 9.0 in

Every 12 months 10 10

Recovery Tank - 30lbs Refrigerant 20.0 in 12.0 in

Every 12 months 10 10

Quality Operations

(DCF)

Type of Gas Cylinder Size

Grade Delivery Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

Used in 605-5A for XRF (2-3 tanks/Year) Argon 55.0 in 9.0 in

Ultra 10% Methane/90%

Argon Every 3 months 1 4

Used in 205-13A:

cat. #UN1072 (3- 4 tanks/Year Oxygen 55.0 in 9.0 in N/A

Every 3 months 1 4

Used in 205-13A (16-20 tanks/Year) Nitrogen 60.0 in 9.0 in Ultra-High Purity

(WCF)

Type of Gas Cylinder Size

Grade Delivery Frequency

Number of Cylinders

Per Delivery

Yearly Total

Estimate

Unit Price

Total Price

Height (in) Dia (in) (Yearly

Total x Unit Price)

"T" 332cft.

UN1006 Argon 55.0 in 9.3 in Industrial

Every 2 weeks 1 26

"K" 248cft.

UN1072 Oxygen 51.0 in 9.0 in Industrial

Every 2 weeks 1 26

"S" 195cft.

UN1956

Argon / Carbon Dioxide 46.0 in 7.4 in Industrial

Every 2 weeks 2 52

"4" 125cft.

UN1001 Acetylene 39.0 in 8.0 in Industrial

Every 2 weeks 1 26

"S" 195cft.

UN1066 Nitrogen 46.0 in 7.4 in Industrial

Every 2 weeks 1 26

Yearly Unit

Emergency Delivery Surge Charge for both locations

IV. AWARDING CALLS UNDER THE BLANKET PURCHASE AGREEMENT

A. BPA Call: A Call is the contractual instrument issued by the Government to the contractor to order work. The call is issued upon agreement between the Government and the contractor on the performance, performance time, and the price for the work. The call will be the Notice-To-Proceed. An individual call will be Fixed Price. An Order for Supplies or Services Form (Optional Form 347) will be issued for each Call. BPA Calls may be mailed, emailed, or faxed, whichever is more expeditious. The government reserves the right to issue BPA Call orders unilaterally.

Calls placed under this BPA shall contain the following information:

♦ Date of Call.

♦ BPA number and BPA Call number.

♦ Item number and scope of work.

♦ Delivery or performance date.

♦ Place of delivery or performance.

♦ Packaging, packing, and shipping instructions.

♦ Accounting and appropriation data.

♦ Any other pertinent information.

B. Modifications to Calls may be required due to increased scope of work or a decreased scope of work. Modifications are issued pursuant to specific standard clauses contained in the basic agreement. All Calls are subject to the terms and conditions of this BPA. In the event of conflict between a Call and this BPA, the BPA shall control.

C. This Blanket Purchase Agreement does not guarantee the contractor issuance of any Calls.

V. ORDERING PERIOD

The term of any issued BPA will be for a period of five years or $325,000.00, whichever occurs first.

VI. AUTHORIZED USERS

Warranted Government BEP Contracting Officers are the only users to place calls under this BPA. This BPA is for BEP use only.

VII. LIMITS

A. This BPA does not obligate any funds, and it does not authorize any work. The

Government is under no obligation to the BPA holder to purchase any specified quantity or dollar value of services. The Government is obligated only to the extent of authorized orders made under the BPA. It is the responsibility of the individual ordering entities under the BPA to ensure adequate funds are available. There is no limit on the dollar value of order purchases made under this BPA.

B. The not to exceed value of this BPA is $325,000.00.

VIII. CANCELLATION

This BPA may be unilaterally cancelled by the Contracting Officer if the BPA holder fails to perform in accordance with the terms and conditions of this BPA, any Call established under this BPA, or if deemed in the best interest of the Government.

IX. NOTIFICATION REGARDING ADMINISTRATIVE OR OTHER ISSUES

If at any time during the performance of this BPA, administrative or other issues should arise which will have an adverse impact on timely performance by the BPA Holder or affect the costs or funding, the BPA Holder is required to immediately notify the Contracting Officer identified in this BPA. This notification shall be in writing.

X. BPA TERMS AND CONDITIONS FLOWDOWN

The BPA Holder shall execute binding agreements with its subcontractors, if any, which, as a minimum, establish that:

o BPA Terms and Conditions specified are applicable to all efforts ordered under this BPA.

o If additional clauses are needed, they will be included in the individual Calls.

[END OF SECTION]

SECTION II – PERFORMANCE WORK STATEMENT

Replenishment of Industrial Gas Cylinders Blanket Purchase Agreement

I. Purpose and Background

The Bureau of Engraving and Printing (BEP) develops and produces United States currency notes, trusted worldwide. The Bureau of Engraving and Printing uses several types of industrial gases at its facilities located in Washington, D.C. and Fort Worth, TX.

These gases support the manufacturing process in providing high quality print products of which the primary is United States Currency.

The purpose of this procurement action is to provide a time based replenishment process and a simple swap empty/full exchange of procuring industrial gases used in our currency manufacturing process. BEP storeroom personnel will issue gas cylinders to BEP components from a secured area. This will also minimize instances of over purchase, out of stock items and overall, provide better inventory management control. The BEP seeks to establish a Blanket Purchase Agreement for the replenishment of industrial gas cylinders.

II. Technical Requirements

A. The Contractor shall replenish the following gases:

Nitrogen Cylinders Oxygen Cylinders Argon Cylinders Acetylene Cylinders Hydrogen Cylinders Carbon Dioxide Cylinders Refrigerants

B. Contractor shall adhere to Attachment A for the various types of cylinders for each designated office, frequency of delivery, and quantities. The Bureau may request increased quantities of the various gases. The frequency may vary based on changes in manufacturing processes. Based on Bureau needs, the agency may request delivery of industrial gases not identified in Section A above.

C. Contractor shall pick up empty cylinders and replace with filled ones.

D. All gas cylinders shall be clearly labeled on all sides and visible from a distance of

20ft on with the appropriate gases (i.e., Argon, Nitrogen, etc.)

E. All cylinders shall have clearly visible safety hazardous signage.

F. All work performed by the contractor shall be accomplished in accordance with Attachment A and the issued Call, purchase order, and by the COR. The contractor shall be required to correct any contractor discrepancies noted as authorized content of the COR.

G. Contractor transporting gas cylinders shall follow basic safety requirements. Drivers should be trained in the associated hazards and dangers of the goods and safe handling of gas cylinders.

H. Cylinder valves must be closed whilst in transit and any equipment disconnected.

I. Contractor personnel working under this BPA shall be United States or naturalized citizens. Contractor shall be escorted at all times.

J. Cylinders should be secured properly and should not project beyond the sides or ends of the vehicle.

K. If a leak is suspected, Contractor shall park the vehicle in a safe place and contact security immediately.

L. Emergency Deliveries: In some cases, the BEP may need cylinders delivered within 24 hours. Contractor shall have the capability to meet the delivery timeframe once contacted by the BEP designed Contracting Officer Representative (COR).

M. The Contractor shall email a Bill of lading (i.e., which details a shipment of merchandise and gives title of that shipment to BEP) to the Contracting Officer Representative(s) and Store room personnel at both facilities.

III. Deliverable Schedule

The Contractor shall adhere to all deliverable schedules as stated in the issued Calls.

Contractor shall notify the designed COR to schedule deliveries.

IV. Place of Performance/Delivery

Contractor shall provide services at both facilities:

Bureau of Engraving and Printing Bureau of Engraving and Printing Eastern Currency Facility (DCF) Western Currency Facility (WCF) 14th and C Streets, SW 9000 Blue Mound Road Washington, DC 20228 Fort Worth, TX 76131

V. Hours of Delivery

Deliveries to WASHINGTON, D.C. ANNEX BUILDING – (LOADING DOCK ON “D” STREET SW, BETWEEN 13th & 14th STREETS SW):

Vendors must call the appointment hotline at (202) 874-2333 twenty-four (24) hours in advance to schedule approximate delivery times. The hotline is manned from 6:30 am to 2:15 pm Monday through Friday. A voicemail message may be left after normal working hours. Deliveries are accepted between 8:00 am and 2:15 pm, Monday through Friday, excluding holidays.

Over the road vehicles having an overall height exceeding 12’6” (3.8 meters) empty, or an overall length exceeding 42’ (12.2 meters) cannot be accommodated at our receiving platform.

To resolve any delivery issue, please contact Shipping & Receiving at (202) 874-3620 care of Material Handler/Leader.

Deliveries to FORT WORTH, TX FACILITY, 9000 BLUE MOUND ROAD, FORT WORTH, TEXAS: Vendors must call the Receiving Area at (817) 847-3822 at least twenty-four (24) hours in advance to schedule all deliveries. Appointments may be made during normal working hours of 7:00 am to 3:00 pm or after hours at (817) 847- 3831. Receiving hours are from 7:00 am to 2:30 pm local time, Monday through Friday, excluding holidays. To resolve any delivery issue, please contact Shipping & Receiving at (817) 847-3831 or (817) 847-3822.

VI. Delivery Requirements

The following DELIVERY information must be provided when scheduling delivery appointments:

Name of supplier/manufacturer BPA Call Number Total number of items Total weight Date and time of delivery

VII. Hazardous Materials

The Contractor shall perform duties as are necessary for proper control, issue and disposal of Hazardous and non-hazardous chemicals used in the course of production in accordance with all federal, state and local laws.

VIII. Breach of Security

The Contractor, subcontractors, or any of their employees, shall not disseminate or disclose any information concerning the operations and activities of the BEP that could result in, or increase the likelihood of, a breach of the facility’s perimeter, internal security, or interrupt the continuity of its operations.

IX. Comments or Complaints

The Contractor shall notify the Contracting Officer (CO) or COR prior to releasing or disseminating official information related to inquiries, comments, or complaints that are made as a result of or in connection with the performance of this BPA.

X. Safeguarding Information

The Contractor shall have the responsibility for safeguarding the information and records (regardless of media) from being compromised, altered, destroyed, mutilated, damaged, or lost. All records and documents in connection with the performance of this BPA shall be retained per the Bureau’s general records schedule, and be stored in Government-issued locked cabinets at all times and remain the property of the BEP. See Title 18 of the United State Code, Section 2071 for penalties arising from the destruction of official Government records.

All information pertinent to the Bureau resources that is provided to simplify performance of the work, or which is generated because of performance of the services required by the BPA, are highly sensitive and shall not be released to third parties without the express, written consent of the Bureau. This information requires strict control procedures to preclude unauthorized disclosure or dissemination. Information pertinent to personnel is protected from unauthorized disclosure under provisions of the Privacy Act (5 USC 552a).

The Contractor shall not provide access to employees, or Sub-contractor employees, until written access clearance is provided by the Bureau’s Personnel Security Division, Office of Security. Contractors and Sub-contractors are responsible for reporting all changes concerning any of their employees, which may affect the suitability of their employees for access to the Bureau or placement in any of these positions including additions, or deletions, to the COR within five (5) days of the occurrence of the change.

XI. Rules and Regulations

The Contractor shall be responsible for providing to its personnel detailed instruction of the rules and regulations related to BEP operations as applicable to this contract. The Contractor must also comply with all applicable Privacy Act regulations governing personal and confidential information. The Contractor shall inform Contractor employees of any changes to rules and regulations throughout the life of the BPA, and shall ensure personnel understand and adhere to changes upon implementation.

XII. Physical Security

The Contractor shall be responsible for safeguarding all Government property used in the performance of this BPA. All Government facilities, equipment, and materials shall be secured at all times.

XIII. Rescheduling

Any requirements for rescheduling work will be communicated through the COR to the Contractor Site/Project Manager via telephone, email or in person.

XIV. Down Days/Weather Days

Contractor will be notified by the COR in the event the Bureau has closures or delays.

This notification may be via telephone, in person or email.

XV. BEP Year End Shutdown (YES) Period and Federal Holidays

BEP observes the federal holidays that are listed on the Office of Personnel Management website at: https://www.opm.gov/fedhol/. The Presidential Inauguration Day, which falls on January 20, 2017, is applicable only to the DCF.

BEP’s YES Period typically occurs December 25th through January 1st of each calendar year.

In addition to the days designated as holidays, the Government observes also the following days:

Any other day designated by Federal Statute, and Any other day designated by Executive Order, and Any other day designated by President’s Proclamation, such as extreme weather conditions.

XVI. Deliverables

Monthly Reports: Contractor shall submit a monthly report no later than the 15th of each month to the BEP CORs. The report shall include the following:

• Type of gases delivered

• Quantity

• Individual who delivered the gases

• Date and time the gases were delivered

• Location the gases were delivered to

• Number of emergency delivery requests

• A copy of the signed delivery receipt. Receipt shall include the Government personnel who received the gases.

XVII. Performance Requirements Summary

The contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The performance threshold briefly describes the minimum acceptable levels of service for each requirement.

Performance Requirement

Performance Standard

Maximum Allowable Degree of deviation

(AQL)

Method of Surveillance

Maximum Payment Percentage for Meeting/Exceeding the

AQL

Contractor shall provide various types of cylinders to the BEP

Contractor shall adhere to the type of gases and delivery schedules established in the BPA calls.

0% variance Contractor shall provide COR with a list of gases delivered for each call.

Favorable Performance Review for meeting all mandated requirements.

Non-conformance is unacceptable

All gas cylinders shall be clearly labeled with the appropriate gases

Contractor shall adhere to OSHA regulations

0% variance Periodic and random inspection

Customer complaints

Favorable Performance Review for meeting all mandated requirements.

Non-conformance is unacceptable

Emergency Deliveries In emergency situations, Contractor shall deliver request for needed cylinders within 24 hours.

0% variance Contractor shall provide COR with a list of gases delivered for each emergency

Favorable Performance Review for meeting all mandated requirements.

Non-conformance is unacceptable

SECTION III – SPECIAL REQUIREMENTS

I. BPA Administration Office

(a) This BPA will be administered by:

Bureau of Engraving and Printing Office of Acquisition 14th and C Streets, S.W.

Washington, D.C. 20228-0001

(b) Written communication to the Contracting Officer (CO) shall make reference to the BPA number.

II. DTAR 1052.201-70, Contracting Officer's Representative (COR) Appointment and

Authority (APR 2015)

(a) The COR WILL BE PROVIDED AT BPA AWARD.

(b) Performance of work under this contract is subject to the technical direction of the COR identified above, or a representative designated in writing. The term “technical direction” includes, without limitation, direction to the contractor that directs or redirects the labor effort, shifts the work between work areas or locations, and/or fills in details and otherwise serves to ensure that tasks outlined in the work statement are accomplished satisfactorily.

(c) Technical direction must be within the scope of the contract specification(s)/work statement. The COR does not have authority to issue technical direction that:

(1) Constitutes a change of assignment or additional work outside the contract specification(s)/work statement;

(2) Constitutes a change as defined in the clause entitled “Changes”;

(3) In any manner causes an increase or decrease in the contract price, or the time required for contract performance;

(4) Changes any of the terms, conditions, or specification(s)/work statement of the contract;

(5) Interferes with the contractor's right to perform under the terms and conditions of the contract; or

(6) Directs, supervises or otherwise controls the actions of the Contractor's employees.

(d) Technical direction may be oral or in writing. The COR must confirm oral direction in writing within five workdays, with a copy to the Contracting Officer.

(e) The Contractor shall proceed promptly with performance resulting from the technical direction issued by the COR. If, in the opinion of the Contractor, any direction of the COR or the designated representative falls within the limitations of (c) above, the

Contractor shall immediately notify the Contracting Officer no later than the beginning of the next Government work day. (End of clause)

III. Type of Contract

This is a Firm Fixed-Price type Blanket Purchase Agreement.

IV. Interpretation of BPA Requirements

No interpretation of any provision of this BPA, including applicable specification(s)/work statement, shall be binding on the Government unless furnished or agreed to in writing by the Contracting Officer.

V. Notice to The Government of Delays

In the event the Contractor encounters difficulty in meeting performance requirements, or when it anticipates difficulty in complying with the delivery schedule(s) or date(s), or whenever the Contractor has knowledge that any actual or potential situation is delaying or threatens to delay the timely performance of this BPA, the Contractor shall immediately notify the CO and the COR, in writing, giving pertinent details, provided, however, that this data shall be informational only in character and that this provision shall not be construed as a waiver by BEP of any delivery schedule or date or of any rights or remedies provided by law or under this BPA.

VI. Non-Disclosure of Non Public Information & Data

During the period of performance of the BPA, the Contractor may be granted access to Non Public information and data, which is the sole property of BEP, as well as proprietary information and data, which is the sole property of entities other than the contracting parties. In particular, the Contractor agrees that all information provided by representatives of BEP, either before or after BPA award, concerning the design, manufacture, processing or transporting of United States currency is nonpublic. Such information will be shared only with employees or agents of the company having a need to know, and will not be disclosed to other persons without the written consent of the CO.

Further, the Contractor agrees to maintain the confidentiality of all such information and data and shall not disclose any information and data, interpretations of, and/or derivatives of, such information and data to any unauthorized party without the express written approval of the CO, or of the party in which title is wholly vested. The Contractor hereby agrees to include this clause in all subcontracts or consulting agreements relating to work under this BPA. The Contractor shall be required to sign a Non-Disclosure Agreement (NDA) (Attachment B) from BEP.

VII. Indemnification

Responsibility for Government Property: The Contractor assumes full responsibility for and shall indemnify the Government against any and all losses or damage of whatsoever kind and nature to any and all Government property, including any equipment, supplies, accessories, or parts furnished, while in his custody and care for storage, repairs, or service to be performed under the terms of this contract, resulting in whole or in part from the negligent acts or omissions of the Contractor, any subcontractor, or any employee, agent or representative of the Contractor or subcontractor.

If due to the fault, negligent acts (whether of commission or omission) and/or dishonesty of the Contractor or its employees, any Government-owned or controlled property is lost or damaged as a result of the Contractor's performance of this contract, the Contractor shall be responsible to the Government for such loss or damage, and the Government, at its option, may in lieu of payment thereof, require the Contractor to replace at his own expense, all property lost or damaged.

Hold Harmless and Indemnification Agreement: The Contractor shall save and hold harmless and indemnify the Government against any and all liability claims, and cost of whatsoever kind and nature for injury to or death of any person or persons and for loss or damage to any Contractor property or property owned by a third party occurring in connection with or in any way incident to or arising out of the occupancy, use, service, operation, or performance of work under the terms of this contract, resulting in whole or in part from the acts or omissions of the Contractor, any subcontractor, or any employee, agent, or representative of the Contractor or subcontractor.

Government's Right of Recovery: Nothing in the above paragraphs shall be considered to preclude the Government from receiving the benefits of any insurance the Contractor may carry which provides for the indemnification of any loss or destruction of, or damages to property in the custody and care of the Contractor where such loss, destruction or damage is to Government property. The Contractor shall do nothing to prejudice the Government's right to recover against third parties for any loss, destruction of, or damage to Government property, and upon the request of the Contracting Officer shall, at the Government's expense, furnish to the Government all reasonable assistance and cooperation (including assistance in the prosecution of suit and the execution of instruments of assignment in favor of the Government) in obtaining recovery.

Government Liability: The Government shall not be liable for any injury to the Contractor's personnel or damage to the Contractor's property unless such injury or damage is due to negligence on the part of the Government and is recoverable under the Federal Torts Claims Act, or pursuant to other Federal statutory authority.

VIII. Organizational Conflicts of Interest

The Contractor warrants that, to the best of the Contractor’s knowledge and belief, there are no relevant facts or circumstances which could give rise to an organizational conflict of interest (OCI), as defined in FAR 9.5, Organizational and Consultants Conflicts of Interest, or that the Contractor has disclosed all such relevant information.

The Contractor agrees that if an actual or potential OCI is discovered after award, the Contractor shall make a full disclosure in writing to the Contracting Officer. This disclosure must include a description of actions, which the Contractor has taken or proposes to take, after consultation with the Contracting Officer, to avoid, mitigate, or neutralize the actual or potential conflict.

The Contracting Officer may terminate this contract for convenience, in whole or in part, if it deems such termination necessary to avoid an OCI. If the Contractor was aware of a potential OCI prior to award or discovered an actual or potential conflict after award and did not disclose or misrepresented relevant information to the Contacting Office, the Government may terminate the contract for default, debar the Contractor from Government contracting, or pursue such other remedies as may be permitted by law or this contract.

The Contractor must include this clause in all subcontracts and in lower tier subcontracts unless a waiver is requested from, and granted by, the Contracting Officer.

In the event that a requirement changes in such a way as to create a potential conflict of interest for the Contractor, the Contractor must:

Notify the Contracting Officer of a potential conflict, and;

Recommend to the Government an alternate approach which would avoid the potential conflict, or Present for approval a conflict of interest mitigation plan that will:

Describe in detail the changed requirement that creates the potential conflict of interest; and Outline in detail the actions to be taken by the Contractor or the Government in the performance of the task to mitigate the conflict, division of subcontractor effort, and limited access to information, or other acceptable means.

The Contractor must not commence work on a changed requirement related to a potential conflict of interest until specifically notified by the Contracting Officer to proceed.

If the Contracting Officer determines that it is in the best interest of the Government to proceed with work, notwithstanding a conflict of interest, a request for waiver must be submitted in accordance with FAR 9.503.

IX. Disclosure of Conflicts of Interest

It is the BEP policy to award contracts to only those offerors whose objectivity is not impaired because of any related past, present, or planned interest, financial or otherwise, in organizations regulated by BEP or in organizations whose interests may be substantially affected by Departmental activities. Based on this policy, if at any time during the performance of this contract the Contractor knows of any Conflict of Interest situation affecting the organization, any of its officers working under this contract, has reason to believe that a conflict of interest situation might arise, or is made aware of an actual or potential conflict of interest situation:

The Contractor shall immediately provide to the Contracting Officer a written statement which describes in a concise manner all past, present or planned organizational, financial, contractual or other interest(s) with that organization regulated by BEP, or with that organization or individual whose interests may be substantially affected by Departmental activities, and which is related to the work under this contract. The interest(s) described shall include those of the Contractor, its affiliates, consultants, Subcontractors and key personnel of any of the above. Past interest shall be limited to within one year of the date of the offeror's technical quotation. Key personnel shall include any person owning more than 20% interest in the organization, and the organization's corporate officers, its senior managers and any employee who is responsible for making a decision or taking an action on this contract where the decision or action can have an economic or other impact on the interests of a regulated or affected organization.

The Contractor shall describe in detail when it became aware of the actual or potential conflict of interest, what action the organization has taken or proposes to take to mitigate and / or rectify the situation, and why it believes, in light of the interest(s) identified in (A) above, that performance of the contract can still be accomplished in an impartial and objective manner.

In the absence of any relevant interest identified in (A) above, the Contractor shall certify in its statement that to its best knowledge and belief no affiliation exists relevant to possible conflicts of interest. The Contractor must obtain the same information from any potential Subcontractors prior to award of a subcontract.

The Contracting Officer will review the statement submitted and may require additional relevant information from the Contractor. All such information, and any other relevant information known to BEP, will be used to determine whether a conflict of interest exists or a situation exists that may create a conflict of interest. If any such conflict of interest is found to exist, the Contracting Officer may (1) terminate the contract, or (2) determine that it is otherwise in the best interest of the United States to continue the contract with the Contractor and (3) modify the contract to include appropriate provisions to mitigate or avoid such conflicts in the contract.

If the Contractor refuses to provide the written statement called for in paragraph (A), or any additional information that the Contracting Officer may require, the Contracting Officer may terminate the Contract for convenience if he or she deems that termination is in the best interest of the Government.

X. Evaluation of Contractor Performance

Interim and final evaluations of Contractor performance will be prepared for this contract in accordance with FAR 42.1503. The final performance evaluations will be prepared at the time of completion of work.

The Contractor can elect to review the evaluation and submit additional information or a rebuttal statement. The Contractor will be permitted 60 calendar days to respond. Contractor response is voluntary. If the Contractor does not respond within 60 days, the Government will presume that the Contractor has no comment. Any disagreement between the parties regarding an evaluation will be referred to an individual at a level above the Contracting Officer, whose decision is final.

Copies of the evaluations, Contractor responses, and review comments, if any, will be retained as part of the contract file, and may be used to support future award decisions.

Bureau of Engraving and Printing utilizes the Contractor Performance Assessment Reporting System (CPARS) and the Federal Awarded Performance and Integrity Information System (FAPIIS) to record and maintain past performance information. The past performance systems host a suite of web-enabled applications that are used to document Contractor performance information that is required by Federal Regulations.

The CPARS module assesses performance on contracts for Systems, Services, Information Technology, and Operations Support, Architect-Engineer contracts and performance on Construction contracts. CPARS reference material can be accessed at https://cpars.cpars.gov/cpars/app/home.do

Federal Awarded Performance and Integrity Information System (FAPIIS) http://www.fapiis.gov/fapiis/govt/datareports.jsp

The registration process requires the Contractor to identify an individual that will serve as a primary contact. This individual will be authorized access to the evaluation for review and comment. In addition, the Contractor is encouraged to identify a secondary contact in the event the primary contact is unavailable to process the evaluation within the required 60-day time period. After the BEP Contract Specialist registers the contract in one of the systems listed above, the Contractor will receive a system generated e-mail notifying him/her that the contract is registered. A system generated e-mail will also provide the Contractor with a User ID if the person does not already have a system User ID.

Once a performance evaluation has been prepared and is ready for comment, the Contractor representative will receive a system generated e-mail notification that the performance evaluation is electronically available for review and comment. The Contractor representative will receive an automated e-mail whenever an assessment is completed and can subsequently retrieve the completed assessment from system. Contractors may access evaluations at one of the websites listed above for review and comment in CPARS.

XI. Safety

State “Right to Know” laws and 29 CFR 1910.1200, Employees Hazard Communication Program, require manufacturers, importers and suppliers to label containers of toxic substances or hazardous chemicals with the chemical name and appropriate hazard warning and to provide Material Safety Data Sheets (MSDS) for these substances. Hazard Material Information not meeting the requirement will not be accepted (off-loaded) by the BEP.

XII. Contractor's Representative (CR)

Upon award, the Contractor shall furnish to the Contracting Officer the name of the person he has designated and assigned exclusively to this contract as his agent or representative. The Contractor's Representative shall exercise overall management responsibility for the contract effort, receive technical direction, and handle problems arising under the contract, such as, dismissals, disciplinary matters, etc. The CR is further responsible for coordinating matters of mutual concern with the BEP representatives. In the event questions of responsibility arise, they https://cpars.cpars.gov/cpars/app/home.do http://www.fapiis.gov/fapiis/govt/datareports.jsp shall be resolved by the Contracting Officer or his authorized representative.

The CR may not be diverted to other projects for 14 consecutive days or more without giving prior written notification to the Contracting Officer or his representative. Such notification shall include a justification for the diversion, together with information on the proposed substitute in sufficient detail to permit analysis of any potential negative effects on Contract performance. No substitution shall be made without the written consent of the Contracting Officer; provided, however, that the Contracting Officer may grant such consent retroactively. Any such substitution of a permanent nature will be made a part of this contract through the issuance of a modification.

When the CR is temporarily unavailable to manage the contract effort for a period longer than 72 hours, including absences due to vacation or illness, the Contractor shall provide to the COR written designation of an alternate representative, itemizing any limitations in the alternate's authority. The procedures of paragraph (A) above do not apply to such temporary designations unless they are expected to exceed the time period indicated in that paragraph.

XIII. Compliance with Occupational Safety and Health Act of 1980 Government Owned Facilities / Equipment

Performance of work hereunder shall comply with the provisions of the Occupational Health and Safety Act of 1980, as amended (OSHA). If at any time during the performance of this BPA, the Government - furnished facilities and/or equipment do not conform to OSHA standards, the Contractor must so notify the Contracting Officer, in writing, including a recommendation of the corrective action needed.

XIV. Security Requirements

BEP’s…