Figure_2_-_Bundle_Label_Printing_New_Currency_Design.doc

Attachment

FIGURE 2

BUNDLE LABEL PRINTING

New Currency Design

KEY:

1) Margins

a. Left Margin: 5± 2 mm (3/16 ± 1/16 inch).

b. Upper and Lower Margins: 5 mm (3/16 inch) minimum.

c. Left Margin of Human Readable Information, 3 mm (3/32 inch) minimum.

d. Right Margin of Human Readable. 10 mm (3/8 inch) minimum.

2) Bar Codes left justified.

3) Human readable information left justified in upper right section of the label.

4) Bar codes 13 ± 1 mm (1/2 ± 1/32 inch) high.

5) Human readable information 5 ± 1 mm (3/16 ± 1/32 inch) high.

6) Distance between lines 1 and 2, 3 and 4: 1 mm (1/32 inch) minimum.

7) Distance between lines 2 and 3: 3 mm (1/8 inch) minimum.

8) Space.

9) Counting Mark (every fourth label beginning with first label).

10) Leading edge of label.

Attachment

KEY: FIGURE 2, Continued

11) Printed information on label:

a. The serial number is preceded by a double letter prefix. The first letter is the series and the second letter denotes the bank name.

b. The serial number is eight digits plus prefix and suffix letters, denoting the serial number of the top note. Leading zeros must be included.

c. The brick number is five digits, plus prefix and suffix. Leading zeros must be included. The double letter prefix is the same as that of the serial number in 11), a. above.

d. The maximum length of the bank name is nine characters.

e. The brick indication letters “BR” shall always be included between the denomination and brick number.

f. The bank name is not included in the top line of bar code data. The bank name is indicated by the serial number prefix in the second line of the bar code data.

g. The word “series” is not included in the bar code data.

12) Color Mark

Figure 2

Issue Date:

01Dec06