Figure_1_-_Bundle_Label_Printing-Old_Currency_Design.doc

Attachment

FIGURE 1

BUNDLE LABEL PRINTING

Old Currency Design

KEY:

1) Margins

a. Left Margin: 8 + 1.6 mm (5/16 + 1/16 inch)

b. Upper and Lower Margins: 5 mm (3/16 inch) minimum

c. Left and Right Margins of Human Readable Information:

3 mm (3/32 inch) minimum

2) Bar codes left justified

3) Human readable information left justified in lower right section of the label

4) Bar Codes 13 + 1 mm (1/2 + 1/32 inch) high

5) Human readable information 5 + 1 mm (3/16 + 1/32 inch) high

6) Distance between lines 1 and 2, 3 and 4: 1 mm (1/32 inch) minimum

7) Distance between lines 2 and 3: 3 mm (1/8 inch) minimum

8) Two character spaces required, except when the space adjacent to the series is occupied by a single letter suffix

Attachment

KEY: FIGURE 1, Continued

9) Counting Mark (every fourth label)

10) One character space required

11) Printed information on label

a) The series is assigned a single letter suffix.

b) The serial number is eight digits plus prefix and suffix letters, denoting the serial number of the top note. Leading zeros must be included.

c) The brick number is five digits, plus prefix and suffix. Leading zeros must be included.

d) The maximum length of the bank name is nine characters.

e) The brick indication letters “BR” shall always be included between the denomination and brick number.

f) The bank name is not included in the top line of bar code data. The bank name is indicated by the serial number prefix in the second line of bar code data.

g) The word “series” is not included in the bar code data.

Figure 1

Issue Date 01Dec06