Bear_Trap_Trailer Figure Sheet.pdf

Michigan DNR Bear Trap Trailer Specification Sheet

Fig 1

Fig 2

Fig 3

Overall Length: 12’

Overall height from ground: 51”

80”

30”

Fig 4

Overall width (frame) : 51”

Overall width (outside of rims) : 74”

LED lights 2”x6 ½”

Fig 5

27 ½”

2”x 6” 2” receiver

4-way flat plug 1000# rated tongue jack

Fig 6

57 ½”

2”x3” tubing

2”x2” tubing

Fig 7

3”x3” tubing

13”x13”x1/4”

Boat crank

Spare tire

Fig 8

Mounting Plate: 3 7/8”x3 1/8”x7 5/8”

2”

7”x7” mounting plate

Fig 9

Mounting Plate: 6”x2 ¾””x3/8” thick

Fig 10

49 ½”

Fig 11

25” (1/4” cable)

12 ¾” x 1 ¾” x ¼” thickness

Fig 12

5 ½”

4 ½”

Fig 13

4 ½”

Fig 14

40”2 3/8”x1/2” thick

Fig 15

33”

Fig 16

5 ½”

¾”

Fig 17

Fig 18

Fig 19

4’

1”x1”x1/8”

Fig 20

2”x5/8” pulleys

19 ½”

Fig 21

6”x1 ¼”x1 ¼”

Fig 22

4 Polyethylene wear bars will be added to each angle post contacting trap while in raised position *each bar will be ~12” in length *see above picture for material reference

* polyethylene bar will be attached to the angle post using two (2)-¼”-20 steel threaded inserts located in the angle post (see next slides for picture examples)

Fig 23

Fig 24

= Wear bar locations (where trap contacts trailer angle post )

Fig 25

License plate bracket with license plate light added to Left (Driver’s Side) Fender *see picture for reference

Fig 26

• Trailers will be powder coated with flat Forest Green color before delivery