BAA-RQKS-2014-002.doc
DOC document 168 KB Posted
- Solicitation number
- BAA-RQKS-2014-002
About this file
Initial Announcement
View the file
Other files
| File | Type | Posted |
|---|---|---|
| BAA-RQKS-2014-002-Amd1.doc | DOC document | |
| BAA-RQKS-2014-002-DD254-2.pdf | ||
| BAA-RQKS-2014-002-Basic-SOO.doc | DOC document | |
| BAA-RQKS-2014-002-ModelK.pdf | ||
| BAA-RQKS-2014-002-SectionK.pdf | ||
| BAA-RQKS-2014-002-DD254-1.pdf | ||
| BAA-RQKS-2014-002-TO1-SOO.doc | DOC document | |
| BAA-RQKS-2014-002-CDRLs.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Broad Agency Announcement (BAA) Overview Information
NAICS Code: 541712 Federal Agency Name: Air Force Research Laboratory, AFRL/RYMD & AFRL/RYAP Broad Agency Announcement Title: CONTESTED ENVIRONMENT RADIO FREQUENCY EXPLOITATION AND RESEARCH (CERFER) Broad Agency Announcement Type: Initial Announcement Broad Agency Announcement Number: BAA-RQKS-2014-002 Catalog of Federal Domestic Assistance (CFDA) Number(s): N/A
Proposal Due Date and Time: 18 Dec 2013 at 1200EST. NOTE: Proposal receipt after the due date and time shall be governed by the provisions of FAR 52.215-1(c)(3). It should be noted that this installation observes strict security procedures to enter the facility. These security procedures are NOT considered an interruption of normal Government processes, and proposals received after the above stated date and time as a result of security delays will be considered “late.” Furthermore, note that if offerors utilize commercial carriers in the delivery of proposals, they may not honor time-of-day delivery guarantees on military installations. Early proposal submission is encouraged.
Solicitation Request: Air Force Research Laboratory, AFRL/RYMD, RYAP, Wright Research Site is soliciting technical and cost proposals on the research effort described below. Proposals should be addressed to the Contracting Point of Contact (POC) stated in Section VII of the Full Text Announcement. This is an unrestricted solicitation. Small businesses are encouraged to propose on all or any part of this solicitation. The NAICS Code for this acquisition is 541712 (for Research and Development in the Physical, Engineering, and Life Sciences (except Biotechnology), and the small business size standard is 500 employees. Proposals submitted shall be in accordance with this announcement. There will be no other solicitation issued in regard to this requirement. Offerors should be alert for any BAA amendments that may permit extensions to the proposal submission date.
System for Award Management (SAM) Registration: FAR 52.204-7, System for Award Management (SAM) (JUL 2013), and DFARS 252.204-7004, Alternate A, System for Award Management (SAM) (MAY 2013) are included by reference. SAM is the primary Government repository for prospective federal awardee information and the centralized Government system for certain contracting, grants, and other assistance related processes. It replaces CCR/FedReg, On-line Representations and Certifications (ORCA) and the Excluded Parties Lists System (EPLS). By submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation. Contractors may obtain information on registration and annual confirmation requirements via the SAM accessed through https://www.acquisition.gov or by calling 866-606-8220.
Type of Contract/Instrument: The Air Force reserves the right to award the contract type that is best suited to the nature of research proposed. Accordingly, the Government may award any appropriate contract type under the FAR. It is anticipated that awards under this BAA will generally be Indefinite Delivery / Indefinite Quantity (ID/IQ) Cost Plus Fixed Fee (CPFF) completion type contracts. Cost reimbursement contracts require successful offerors to have an accounting system considered adequate for tracking costs applicable to the contract.
Estimated Program Cost: $46,027,000.00 Anticipated Number of Awards: The Air Force anticipates awarding one (1) IDIQ basic contract, and one (1) Task Order 0001, based on this announcement. However, the Air Force reserves the right to award multiple contracts based on this announcement. In addition, the Air Force reserves the right to award all, some or none of an offeror’s proposal.
Brief Program Summary: The overall goal of the CERFER Program is to advance RF sensing technology with novel hardware, software and algorithmic approaches for agile and flexible sensing which bring to bear all available resources (e.g., spatial diversity, waveform diversity, transmit and receive adaptivity, signals of opportunity, etc.,) to maximize exploitation performance. Specifically, the goal is to address problems of concurrent detection, tracking, imaging, and classification/identification of targets within contested and challenging environments with single and distributed sensing architectures. This will include the development of models, hardware, software, algorithms and techniques spanning basic, applied and advanced research for both active and passive sensing.
In order to achieve the objectives of this effort, advances in sensor subsystems will be required. In particular, attention to the areas of hardware, software and algorithm solutions to detect, track, image and identify targets within contested areas. This includes exploiting passive/active signals in a single or distributed architecture. Methods for measurements and validation will also be needed to verify any improvement. Modeling will also be used in these efforts.
The contractor will be expected to deliver all software and/or hardware as required, and all associated data developed and/or used in the execution of this effort, unless clearly stated otherwise in the proposal.
Address technical questions to: Major Jason Paul, AFRL/RYMD, phone 937-528-8127, email: jason.paul@wpafb.af.mil, AFRL mailing address: Bldg. 620, 2241 Avionics Circle, Wright-Patterson AFB, OH 45433-7303.
Address contracting questions to: (Primary) Joel Harrah, AFRL/RQKSR, 937-255-5306, email: joel.harrah@wpafb.af.mil, (Alternate) Marcus Duff, 937-255-6351, email: marcus.duff@wpafb.af.mil, mailing address: Bldg. 167, 2310 8th Street, Wright-Patterson AFB, OH 45433-7801.
Full Text Announcement
I. Program Description: Air Force Research Laboratory, AFRL/RYMD,RYAP is soliciting technical and cost proposals on the following research effort:
Contested Environment Radio Frequency Exploitation and Research
(CERFER)
STATEMENT OF OBJECTIVES (SOO)
BASIC IDIQ
1.0 Technical Background:
The effectiveness of sensing platforms operating in contested areas is problematic. In the case of active sensing, contested areas can contain competing signals that can disrupt and degrade sensing activities. While these contested areas present a challenge to active sensing, they also provide an opportunity for passive sensing. Passive sensing seeks to exploit the native signals in these contested areas for sensing activities. Passive sensing is also a solution to the problem of operating sensing platforms within the ever dwindling frequency spectrum.
In order to achieve sensing effectiveness in contested areas for active and passive sensing, technological advances to sensing algorithms, software and hardware are required. The Sensors Directorate seeks to develop new technologies and techniques to address these and other RF exploitation limitations.
2.0 Objective:
The objective of CERFER is to advance RF sensing technology with novel hardware, software and algorithmic approaches for agile and flexible sensing which bring to bear all available resources (e.g., spatial diversity, waveform diversity, transmit and receive adaptivity, signals of opportunity, etc.,) to maximize exploitation performance. Specifically, the goal is to address problems of concurrent detection, tracking, imaging, and classification/identification of targets within contested and challenging environments with single and distributed sensing architectures. This will include the development of models, hardware, software, algorithms and techniques spanning basic, applied and advanced research for both active and passive sensing.
3.0 Scope:
In order to achieve the objectives of this effort, advances in sensor subsystems are required. In particular, this requires attention to the areas of hardware, software and algorithm solutions to detect, track, image and identify targets within contested areas. This includes exploiting passive/active signals in a single or distributed architecture. Methods for measurements and validation will also be needed to verify any improvement. Modeling will also be used in these efforts. Section 4 details the research areas that will be addressed to achieve the objectives of CERFER.
4.0 Areas of Research:
4.1 Program planning, systems engineering, development, test plan development, vendor and government agency coordination and logistics planning.
4.2 Perform system, subsystem and algorithm performance testing of RF and similar sensor hardware/software. This includes sensor characterization and calibration, algorithm assessment/optimization and development/evaluation of real-time or off-line signal/data processing.
4.3 Distributed (cooperative) and (non-cooperative) sensing architectures. This includes hardware, software and algorithms for detecting, tracking, imaging and identification of stationary and moving targets
4.3.1 Distributed active (cooperative) and passive (non-cooperative) detection. This activity includes AMTI (Airborne Moving Target Indication) and SMTI (Surface Moving Target Indication) of militarily-relevant targets. The active component of this task primarily addresses multiple-input multiple-output (MIMO) approaches. The passive component primarily uses signals-of-opportunity.
4.3.2 Distributed active (cooperative) and passive (non-cooperative) tracking. This activity develops novel methods for tracking targets using active distributed, and passive radar systems, including (but not limited to) schemes to address ambiguities, ghosting, and target association between multiple receivers.
4.3.3 Distributed active and passive imaging. This activity generally develops and matures image formation algorithms commensurate with spatially-distributed approaches (e.g., bistatic backprojection, etc.) to improve image resolution and other relevant performance metrics to enable human analyst image interpretation and Automatic Target Recognition (ATR). Techniques for addressing corrupted or unavailable meta-data, fusing signals from multiple transmitters and frequency bands, combining data from multiple receivers, estimating and compensating target motion, and other related imaging challenges are also considered.
4.3.4 Distributed active and passive ID/classification. This activity’s goal is to develop of ID techniques based on the salient physical scattering of the targets. Techniques are not necessarily based on existing monostatic ATR state-of-the-art techniques and may include other innovative approaches.
4.4 Synthetic Aperture Radar (SAR) detection, tracking, imaging and identification.
4.4.1 Detection: change detection and related processing. Examples include: video SAR Coherent Change Detection (CCD), video Noncoherent Change Detection (NCD). Issues of importance include real-time and near-real-time processing under multiple size, weight, and power (SWaP) constraints.
4.4.2 Tracking: moving target detection, geolocation, and tracking. Examples include long-duration move-stop-move tracking of vehicles and dismounts in challenging environments.
4.4.3 Imaging: Examples include: Video SAR, imaging to a Digital Elevation Map (DEM). DEM generation. 3-D imaging, interferometric processing, and multistatic imaging. Issues of importance include real-time and near-real-time processing under multiple size, weight, and power (SWaP) constraints.
4.4.4 Identification/classification: Target discrimination, classification, and ID. Examples include ATR of vehicles and dismounts, using wide angle SAR data.
4.5 Fully Adaptive Radar (FAR) (cognitive radar) detection, tracking, imaging and identification.
4.5.1 Detection: This effort seeks novel algorithms for closed loop radar detection from single as well as distributed sensing constructs with extensive performance benchmarking using simulated and measured data-sets. Relevant performance metrics for this purpose need to be developed.
4.5.2 Tracking: This effort is devoted to ameliorating the data association problem inherent to closed loop radar tracking and seeks novel approaches for the radar tracking problem from single and distributed sensing constructs. Extensive performance analysis and benchmarking need to be undertaken.
4.5.3 Imaging: This effort is devoted to ameliorating the data association problem inherent to closed loop radar tracking and seeks novel approaches for the radar tracking problem from single and distributed sensing constructs. Extensive performance analysis and benchmarking need to be undertaken.
4.5.4 Identification/classification: This effort is devoted to closed loop radar classification from single as well as distributed sensing constructs. Novel approaches to mitigate the curse of dimensionality are sought. Performance evaluation of these techniques using simulated and measured data sets needs to be carried out.
4.6 Software development for hardware integration, display/visualization and data compression. Examples of data compression include image and phase history data compression that preserves SAR CCD quality.
4.7 Advanced RF exploitation theory and algorithm development, optimization, and performance prediction for RF detection, tracking, imaging, and classification/ID with an emphasis on the challenges of contested anti-access area denial (A2/AD) and RF-congested environments. This includes lower frequency exploitation (eg foliage and building penetration).
4.8 Implementation and optimization of algorithms on high performance data processors, e.g., to realize large-area real-time operations. Develop techniques and technologies to counter the size, weight, and power (SWAP) constraints of sensing platforms for contested environments (RPAs,”weapons as sensors”, etc).
4.9 Development of models and simulations of current/future implementations of RF sensors using high level programming languages, and engineering and scientific software packages, such as MATLAB, MATHCAD, SIMULINK, PYTHON, LINUX, C, C++, and VHDL. Documentation within the code is also required.
4.10 Design, fabricate, program, operate and calibrate prototype and interface hardware for current/future implementations of RF and similar sensors. This includes hardware and software for test setups, special purpose test equipment, hardware interfaces to existing systems, test circuits, and cables.
4.11 Conduct appropriate ground, airborne and space tests to collect data from relevant targets and to collect background clutter to develop and evaluate electronic protection techniques. These tests could occur in CONUS or OCONUS.
4.12 On-site contractor support will also be needed to work alongside government personnel periodically, which will require base support. For each task, repeatability of experiments and clear documentation are critical.
4.13 Unlimited data rights are desirable for deliverables.
5.0 Required Expertise
The Offeror shall accomplish multiple separate and independent research projects related to specific Air Force needs in the areas of sensor/sensing phenomenology, signal processing, hardware/software implementation, circuit fabrication, modeling/simulation, RF design and test/measurement. Individual Task Ordered research projects may be independent or complementary to one or more other already ongoing and separately funded research contracts.
6.0 Management Objectives
Management objectives include maintaining clear government visibility into program schedule, performance, and risk while allowing the contractor maximum flexibility and innovation to manage the effort. This would include program schedule, cost, performance, risks, associate contractor agreements, subcontracts and data to meet contract objectives that satisfies all technical requirements.
6.1 Meetings: Host a post-award conference within 30 days of contract award. Program management reviews and technical interchange meetings for each individual delivery order will be required. Agendas for all meetings will be developed jointly.
6.2 Systems Engineering: Disciplined systems engineering approach tailored to meet the Program and Contract Objectives is required to provide an integrated development program.
6.3 Materials: The contractor shall procure materials if they are not available through government channels and are required for the performance of this program. The materials shall consist of test equipment, supplies, replacement and new parts, subassemblies, manufacturer's literature, and manuals which are not available through government channels and/or not available in sufficient time to meet the urgency of requirements. Flight/ground testing requirements may involve the use of contractor-owned/operated or government-owned/operated testbed aircraft.
7.0 OPSEC
General OPSEC procedures, policies and awareness is required in an effort to reduce program vulnerability from successful adversary collection and exploitation of critical information. OPSEC will be applied throughout the lifecycle of the contract. The Critical Information List will be provided upon request by the RYOY Security Office. While working on the government installation OPSEC will be provided by the RYOY Security Office.
8.0 Deliverables
8.1 Data Items: Data shall be delivered in accordance with the CDRLs identified in each task order.
8.2 Software: Software deliverables are anticipated periodically, and will be specified in the individual task orders.
8.3 Hardware: Hardware deliverables are anticipated periodically, and will be specified in the individual task orders.
9.0 Other Requirements:
9.1 Government Furnished Property (GFP): The need for GFP on task orders will be addressed on a case-by-case basis.
9.2 Supplemental Safety Documents Section:
9.2.1 AFRLI 99-101, AFRL Test Guide
9.2.2 AFRLI 91-101, Laboratory System Safety Program
9.2.3 AFI 91-202, AFRL Supplement 1
9.2.4 MIL-STD 882D, Section 4 “General Requirements”
9.3 General Security Requirements: General OPSEC procedures, policies and awareness is required in an effort to reduce program vulnerability from successful adversary collection and exploitation of critical information. OPSEC will be applied throughout the lifecycle of the contract. The Critical Information List will be provided upon request by the RYY Security Office. While working on the government installation, OPSEC will be provided by the RYOY Security Office.
10.0 Schedule (Basic IDIQ)
The overall period of performance for this program is 84 months. 60 months for the ordering period and an additional 24 months to complete all TOs and submit all final reports.
Contested Environment Radio Frequency Exploitation and Research
(CERFER)
STATEMENT OF OBJECTIVES (SOO)
Task Order 0001: “Passive Sensing Testbed and Algorithm Development”
1.0 OBJECTIVES:
The objective of this task order is to progress the state of the art in passive sensing through algorithm development, modeling and simulation verification and performance estimation, in conjunction with rooftop and airborne demonstrations.
2.0 REQUIREMENTS:
The contractor shall plan, accomplish and manage the tasks set forth below:
2.1 Develop passive sensing CONcept of OPerations (CONOPs) and plan research/test efforts to address warfighter needs for contested environments. This work plan will include defining the technical challenges, algorithm development to address these challenges, modeling/simulation to validate algorithms and finally, demonstration. [CERFER BASIC SOO 4.1]
2.2 Develop algorithms to exploit signals of opportunity to perform passive sensing to detect militarily-relevant targets. This includes monostatic or multi-static architectures. [CERFER BASIC SOO 4.3.1]
2.3 Algorithm validation will be performed through modeling, simulation and processing of experimental data. [CERFER BASIC SOO 4.9]
2.4 Rooftop and airborne testing of algorithms. This will require hardware and software implementations of the algorithms developed as well as any hardware required for the test setup. [CERFER BASIC SOO 4.11]
2.5 Unlimited data rights are desirable for the deliverables. [CERFER BASIC SOO 4.13]
3.0 Task Order Funding Profile (estimate):
| FY14 |
| FY15 |
| FY16 |
| Total |
| $500K |
| $500K |
| $500K |
| $1500K |
4.0 SCHEDULE:
Period of performance for Task Order 0001: 36 months (33 months technical, 3 months Final Report)
5.0 DELIVERABLES:
5.1 Data Items:
Deliverables for this effort shall consist of the following data items, as a minimum: users’ manuals as needed, status and financial reports, a final report and the roof/airborne test equipment. Contractor may propose additional data requirements that are necessary to manage the effort.
The following Data Item Descriptions (DIDs) are acceptable for this Task Order (CDRLs A001 through A011 identified in the basic contract are applicable to this TO):
· DI-MISC-80711A/T – SCIENTIFIC AND TECHNICAL REPORTS FINAL REPORT, ASREQ
· DI-FNCL-80331 A/T– FUNDS AND MAN-HOUR EXPENDITURE REPORT, MTHLY
· DI-MGMT-81468/T – CONTRACT FUNDS STATUS REPORT (CFSR), QRTLY
· DI-MGMT-80368A/T – STATUS REPORT, MONTHLY STATUS REPORT, MTHLY
· DI-MISC-80508B/T – SCIENTIFIC AND TECHNICAL REPORTS, CONTRACTOR’S BILLING VOUCHER, MTHLY
· DI-ADMN-81373/T – PRESENTATION MATERIAL, ASREQ
· DI-IPSC-81436A/T - INTERFACE DESIGN DESCRIPTION (IDD), ONE/R
· DI-IPSC-81437A/T - DATA BASE DESIGN DESCRIPTION (DBDD), ONE/R
· DI-IPSC-81435A/T - SOFTWARE DESIGN DESCRIPTION (SDD), ONE/R
· DI-IPSC-81441A/T - SOFTWARE PRODUCT SPECIFICATION (SPS), QRTLY
· DI-IPSC-81443A/T - SOFTWARE USER MANUAL
· DI-NDTI-80566A/T - TEST PLAN
5.2 Software: As Needed
5.3 Hardware: As Needed
6.0 Other Requirements:
6.1 Government Furnished Property/Equipment/Information (GFP/E/I):
None anticipated for Task Order 0001
6.2 Base Support:
None anticipated for Task Order 0001
6.3 DD254:
The DD254 (Secret) is applicable Contested Environment Radio Frequency Exploitation and Research
(CERFER)
BASIC IDIQ and Task Order 0001
1. Other Requirements:
a. Program security classification: TO 0001 requires a SECRET facility clearance and SECRET safeguarding capability. However, up to TOP SECRET will be required on future Task Orders. The DD Form 254s (SECRET & TS/SCI) are attached to this BAA and provide the highest security requirements under this program. Only proposals that meet these security criteria or have the ability to obtain these security requirements will be considered for contract award. Offerors must verify their Cognizant Security Office information is current with Defense Security Service (DSS) at www.dss.mil.
b. Export Control: Information involved in this research effort will be subject to Export Control (International Traffic in Arms Regulation (ITAR) 22 CFR 120-131, or Export Administration Regulations (EAR) 15 CFR 710-774). If effort is subject to export control then a Certified DD Form 2345, Militarily Critical Technical Data Agreement, will be required to be submitted with proposal.
c. Export-Controlled Items: As prescribed by DFARS 225-7901-4, DFARS 252.225-7048, “Export-Controlled Item (JUN 2013)” is contained in this solicitation (as shown below). This clause shall be contained in ALL solicitations and resulting contracts.
EXPORT CONTROLLED ITEMS (JUNE 2013)
(a) Definition. “Export-controlled items,” as used in this clause, means items subject to the Export Administration Regulations (EAR) (15 CFR Parts 730-774) or the International Traffic in Arms Regulations (ITAR) (22 CFR Parts 120-130). The term includes:
(1) “Defense items,” defined in the Arms Export Control Act, 22 U.S.C. 2778(j)(4)(A), as defense articles, defense services, and related technical data, and further defined in the ITAR, 22 CFR Part 120.
(2) “Items,” defined in the EAR as “commodities”, “software”, and “technology,” terms that are also defined in the EAR, 15 CFR 772.1.
(b) The Contractor shall comply with all applicable laws and regulations regarding export-controlled items, including, but not limited to, the requirement for contractors to register with the Department of State in accordance with the ITAR. The Contractor shall consult with the Department of State regarding any questions relating to compliance with the ITAR and shall consult with the Department of Commerce regarding any questions relating to compliance with the EAR.
(c) The Contractor's responsibility to comply with all applicable laws and regulations regarding export-controlled items exists independent of, and is not established or limited by, the information provided by this clause.
(d) Nothing in the terms of this contract adds, changes, supersedes, or waives any of the requirements of applicable Federal laws, Executive orders, and regulations, including but not limited to—
(1) The Export Administration Act of 1979, as amended (50 U.S.C. App. 2401, et seq.);
(2) The Arms Export Control Act (22 U.S.C. 2751, et seq.);
(3) The International Emergency Economic Powers Act (50 U.S.C. 1701, et seq.);
(4) The Export Administration Regulations (15 CFR Parts 730-774);
(5) The International Traffic in Arms Regulations (22 CFR Parts 120-130); and
(6) Executive Order 13222, as extended.
(e) The Contractor shall include the substance of this clause, including this paragraph (e), in all subcontracts.
(End of clause)
2. Other Information:
a. GFP Availability: None anticipated on Task Order 0001. TBD on future task orders.
b. Base Support/ Network Access: Base Support and Network Access is not anticipated for task order 0001. Base support for future task orders will be determined based on the task order requirement and subsequent proposal.
c. Multiple awards subject to Fair Opportunity are not anticipated.
d. Data Rights Desired:
(1) Technical Data: Unlimited Rights
(2) Non-Commercial Software (NCS): Unlimited Rights
(3) NCS Documentation: Unlimited Rights
(4) Commercial Computer Software Rights: Customary License
The Air Force Research Laboratory is engaged in the discovery, development, and integration of warfighting technologies for our air, space, and cyberspace forces. As such, rights in technical data and NCS developed or delivered under this contract are of significant concern to the government. The Government will therefore carefully consider any restrictions on the use of technical data, NCS, and NCS documentation which could result in transition difficulty or less-than full and open competition for subsequent development of this technology.
In exchange for paying for development of the data, the Government expects technical data, NCS, and NCS documentation developed entirely at Government expense to be delivered with Unlimited Rights.
Technical data, NCS, and NCS documentation developed with mixed funding are expected to be delivered with at least Government Purpose Rights. Offers that propose delivery of technical data, NCS, or NCS documentation subject to Government Purpose Rights should fully explain what technical data, NCS, or NCS documentation developed with costs charged to indirect cost pools and/or costs not allocated to a Government contract will be incorporated, how the incorporation will benefit the program, and address whether those portions or processes are segregable. The Government expects that delivery of technical data, NCS, and NCS documentation subject to Government Purpose Rights will fully meet program needs.
Offers that propose delivery of technical data, NCS, or NCS documentation subject to Limited Rights, Restricted Rights, or Specifically Negotiated License Rights will be considered. Proposals should fully explain what technical data, NCS, or NCS documentation developed with costs charged to indirect cost pools and/or costs not allocated to a government contract will be incorporated and how the incorporation will benefit the program.
Offerors are reminded that the Identification and Assertion of Restrictions on the Government’s Use, Release, or Disclosure of Technical Data or Computer Software (the assertions list), required under DFARS 252.227-7013 and DFARS 252.227-7014, is included in Section K and due at time of proposals. Assertions must be completed with specificity with regard to each item, component, or process listed. Nonconforming assertions lists will be rejected.
Note that DFARS 252.227-7014(d) describes requirements for incorporation of third party computer software (commercial and nonconmmercial). Any commercial software to be incorporated into a deliverable must be clearly identified in the proposal. Because many commercial software licenses are not transferrable or may not be acceptable to the Government, commercial software licenses proposed for delivery to the Government must be approved by the contracting officer prior to award.
As used in this subparagraph, the terms Unlimited Rights, Government Purpose Rights, Specifically Negotiated License Rights, and Limited Rights in technical data are as defined in DFARS 252.227-7013. The terms Unlimited Rights, Government Purpose Rights, Specifically Negotiated License Rights, and Restricted Rights in noncommercial computer software and noncommercial software documentation are as defined in DFARS 252.227-7014. The term Commercial Computer Software is as defined in DFARS 252.227-7014.
II. Award Information
1. Anticipated Award Date for the Basic IDIQ and TO 0001: 14 Mar 2014
2. Anticipated funding for the program (not per contract)
| FY14 |
| FY15 |
| FY16 |
| FY17 |
| FY18 |
| Total |
| $6.95M |
| $10.83M |
| $9.125M |
| $10.175M |
| $8.947M |
| $46.027M |
This funding profile is an estimate only and not a contractual obligation for funding. All funding is subject to change due to Government discretion and availability. Potential offerors should be aware that due to unanticipated budget fluctuations funding in any or all areas may change with little or no notice.
3. Number of awards anticipated: The Air Force anticipates awarding one (1) IDIQ Basic Contract, and one (1) Task Order 0001, based on this announcement. However, the Air Force reserves the right to award multiple contracts, of any contract type, based on this announcement. In addition, the Air Force reserves the right to award all, some or none of an offeror’s proposal.
III. Eligibility Information
1. Eligible Offeror: This is an unrestricted solicitation. Small businesses are encouraged to propose on all or any part of this solicitation.
2. Cost Sharing or Matching: Cost Sharing is not required.
3. Federally Funded Research and Development Centers: The following guidance is provided for Federally Funded Research and Development Centers (FFRDCs) contemplating submitting a proposal, as either a prime or subcontractor, against this BAA. FAR 35.017-1(c)(4) prohibits an FFRDC from competing with any non-FFRDC concern in response to a Federal agency request for proposal for other than the operation of an FFRDC (with exceptions stated in DFARS 235.017-1(c)(4)). There is no regulation prohibiting an FFRDC from responding to a solicitation. However, the FFRDC’s sponsoring agency must first make a determination that the effort being proposed falls within the purpose, mission, general scope of effort, or special competency of the FFRDC, and that determination must be included in the FFRDC’s proposal. In addition, the non-sponsoring agency (in this case AFRL) must make a determination that the work proposed would not place the FFRDC in direct competition with domestic private industry. Only after these determinations are made would a determination be made concerning the FFRDC’s eligibility to receive an award.
4. Government Agencies: If a Government agency is interested in performing work, contact the Program Office identified in the BAA. If those discussions result in a mutual interest to pursue your agency's participation, the effort will be pursued independent of this announcement.
5. Other Information:
a. Foreign participation: No
b. This acquisition involves data that are subject to export control laws and regulations. Only contractors who are registered and certified with the Defense Logistics Services Center (DLSC) and have a legitimate business purpose may participate in this solicitation. Contact the Defense Logistics Services Center, 74 Washington Avenue N., Battle Creek, Michigan 40917-3084 (1-800-352-3572) for further information on the certification process. You must submit a copy of your approved DD Form 2345, Militarily Critical Technical Data Agreement, with your proposal.
c. There are no limits to the number of proposals an offeror may submit.
d. You may be ineligible for award if all requirements of this solicitation are not met on the proposal due date as identified above.
IV. Proposal and Submission Information
1. Overview: Proposals submitted shall be in accordance with this announcement. There will be no other solicitation issued in regard to this requirement. The Government intends to evaluate proposals and award all, some or none of the proposals received without negotiation/discussion; however, the Government reserves to right to negotiate with those offeror(s) whose proposal is selected for funding.
Offerors should be alert for any BAA amendments that may permit extensions to the proposal submission date.
For additional information, a copy of the Broad Agency Announcement (BAA) Guide for Industry at http://www.wpafb.af.mil/shared/media/document/AFD-120614-075.pdf.
2. Content and Form of Proposal Submission: The paragraphs below identify proposal format and content. Proposals should be addressed via mail to the Contracting Point of Contact (POC) identified in Section VII.
a. General Instructions: Offerors should apply the restrictive notice prescribed in the provision of FAR 52.215-1(e) Instructions to Offerors—Competitive Acquisition. Offerors should consider proposal instructions contained in the Broad Agency Announcement (BAA) Guide for Industry, which can be accessed on line at http://www.wpafb.af.mil/shared/media/document/AFD-120614-075.pdf. This guide is specifically designed to assist the offeror in understanding the BAA proposal process.
i. Technical/management and cost volumes, for the BASIC ID/IQ and the TASK ORDER 0001, should be submitted in separate volumes, and must be valid for 180 days. Proposals must reference the announcement number BAA-RQKS-2014-002.
ii. Offerors must submit one (1) original and seven (7) paper hard copies of their proposals (Basic IDIQ & Task Order 0001) via mail to the Contracting POC, identified in Section VII. In addition, offerors must include one (1) CD/DVD containing both the Technical/management and cost volumes of their proposals (Basic IDIQ & Task Order 0001). The cost file (s) spreadsheets must include the formulas for calculating cost element bases (ie. Overhead base, G&A base, Material Handling base, etc.).
iii. Offerors are advised that only contracting officers are legally authorized to contractually bind or otherwise commit the government. The cost of preparing proposals in response to this BAA is not considered an allowable direct charge to any resulting or any other contract; however, it may be an allowable expense to the normal bid and proposal indirect cost as specified in FAR 31.205-18.
b. Offerors must propose the following to be considered for an ID/IQ award:
i. BASIC ID/IQ
a) A BASIC ID/IQ contract proposal (Technical and Management)
b) A Statement of Work (SOW) for the BASIC ID/IQ Contract in response to the BASIC ID/IQ Statement of Objectives (SOO)
ii. TASK ORDER 0001
a) A TASK ORDER 0001 proposal (Technical and Management)
b) A Statement of Work (SOW) for the TASK ORDER 0001 in response to the TASK ORDER 0001 Statement of Objectives (SOO)
c) A COST PROPOSAL for TASK ORDER 0001
a. Technical/Management Proposal: BASIC ID/IQ and TASK ORDER 0001
i. Page Limitations: The following describes the page limitations on the proposal submittal:
a) The technical/management proposal shall be limited to 25 pages (25 for the Basic, and 25 for Task Order 0001) prepared and submitted in Microsoft Word or .pdf format. If a pdf document is submitted, the source document is also required (i.e. Word, Latex, etc…).
b) Font shall be standard 10-point business font Arial.
c) Character spacing must be standard and not condensed in any manner.
d) Pages shall be double-spaced, double sided (each side counts as one page), 8.5 by 11 inches, with at least one-inch margins on both sides, top and bottom.
e) All text, including text in tables and charts, must adhere to all font size and line spacing requirements listed herein. Font and line spacing requirements do not have to be followed for illustrations, flowcharts, drawings, and diagrams. These exceptions shall not be used to circumvent formatting requirements and page count limitations by including lengthy narratives in such items.
f) Pages shall be numbered starting with the cover page being Page 1, and the last page being no greater than Page 25.
g) The page limitation covers all information including indices, photographs, foldouts (counted as 1 page for each 8.5 by 11 portion) tables, charts, appendices, attachments, etc. RESUMES ARE NOT included in the page limitation and shall be paginated with characters differing from those used in the technical/management proposal. (I.E. Letters rather than numbers)
h) The technical/management proposal page limit DOES NOT INCLUDE the offeror’s proposed Statements of Work (SOW); however, the same formatting rules apply to the SOWs (Basic IDIQ & Task Order 0001), which is limited to 5 pages.
i) The CD/DVD with the Microsoft WORD or pdf version of your Technical/Management Proposals and the SOWs must be submitted with the hard copies of the proposal, and must match the hard copy. If a pdf document is submitted, the source document is also required (i.e. Word, Latex, etc…).
j) Please note: the Government will check the proposals and SOWs for conformance to the stated requirements. Any pages in excess of the stated page limitation after the format check will not be considered.
ii. The technical/management proposals shall include a discussion of the nature and scope of the research and the technical approach. Additional information on prior work in this area, descriptions of available equipment, data and facilities and resumes of personnel who will be participating in this effort should also be included as attachments to the technical proposal. This volume shall include a SOW detailing the technical tasks proposed to be accomplished under the proposed effort and suitable for contract incorporation. Do not include any proprietary information in the SOW. If classified addendums/appendices are required, please contact the technical POC listed in section VII delivery instructions. Refer to the BAA Guide for Industry, http://www.wpafb.af.mil/shared/media/document/AFD-120614-075.pdf , referenced above to assist in SOW preparation. If Government Furnished Property is requested you are required to submit the following information with your offer
(a) A list or description of all Government property that the offeror or its subcontractors propose to use on a rent-free basis. The list shall identify the accountable contract under which the property is held and the authorization for its use (from the contracting officer having cognizance of the property);
(b) The dates during which the property will be available for use (including the first, last, and all intervening months) and, for any property that will be used concurrently in performing two or more contracts, the amounts of the respective uses in sufficient detail to support prorating the rent;
(c) The amount of rent that would otherwise be charged in accordance with FAR 52.245-9, Use and Charges; and
(d) The voluntary consensus standard or industry leading practices and standards to be used in the management of Government property, or existing property management plans, methods, practices, or procedures for accounting for property.
iii. Any questions concerning the technical proposal or SOW preparation shall be referred to the technical POC listed in section VII.
b. Cost/Business Proposal: TASK ORDER 0001
i. Separate the proposal into a business section and cost section.
ii. Adequate price competition is anticipated.
iii. The business section should contain the following:
(a) All business aspects to the proposed contract, such as type of contractual instrument, any exceptions to terms and conditions of the announcement model contract attached to this announcement, any information not technically related, etc. Provide rationale for exceptions.
(b) Identify any technical data that will be delivered with less than unlimited rights.
(c) Cost/business proposals have no page limitations; however, offerors are requested to keep cost proposals to less than 100 pages as a goal.
(d) The cost proposal shall be furnished with supporting schedules and shall contain a person hour breakdown per task. The cost proposal should include the following at a minimum, with supporting documentation broken out by SOW task:
1. Labor category and quantity of labor hours for each category
2. Labor rates by labor category
3. Indirect rates (ie. G&A, Overhead, Fringe, etc.)
4. Subcontracting - A subcontract analysis is required for any proposed subcontract which states how the subcontractor was selected and how the costs were determined fair and reasonable. A “value added” analysis is required for the value added by the prime if subcontract costs are more that 70% of the overall proposed costs.
5. Travel – Number of trips & travelers, destination and duration, any other travel related costs (ie. rental cars, taxi, etc.)
6. Materials – List all material and/or equipment to be purchased during execution of the effort. Provide rationale/methodology for determining the costs fair and reasonable. Any high dollar value material purchases should be supported with the “fully burdened unit cost: as required by DFARS 252.211-7003 entitled “Item Identification and Valuation” of the basis contract.
(e) Refer to the BAA Guide for Industry for detailed proposal instructions. http://www.wpafb.af.mil/shared/media/document/AFD-120614-075.pdf
iv. Subcontracting plans, for efforts anticipated to exceed $650,000, shall be submitted along with the technical and cost proposals. Reference FAR 19.704, DFARS 219.704, and AFFARS 5319.704(a)(1) for subcontracting plan requirements. Small business concerns are exempt from this requirement. If an ID/IQ contract arrangement is anticipated, the basis for the subcontracting plan should reflect the entire ceiling amount.
e. Proposal Content Summary: You may be ineligible for award if all requirements of this solicitation are not met on the proposal due date. Reference Section VIII for a Checklist of the requirements.
3. Proposal Due Date and Time: 18 Dec 2013 at 1200 EST NOTE: Proposal receipt after the due date and time shall be governed by the provisions of FAR 52.215-1(c)(3).
NOTE: Intent to Propose: Offerors that anticipate submitting a proposal are requested to submit an e-mail to Marcus Duff and Joel Harrah, at marcus.duff@us.af.mil and joel.harrah@us.af.mil, containing the name of the contractor, the POC, and the contractor’s intent to submit a proposal. This “Intent to Propose” is requested by 11 Dec 2013 by 1500EST.
4. Intergovernmental Review: N/A
5. Funding Restrictions: N/A
6. Other Submission Requirements:
Proposals must be submitted to:
Marcus Duff or Joel Harrah
AFRL/RQKSR
2310 8th St., Bldg 167, RM 130
Wright-Patterson AFB, OH 45433-7801 If Required, Classified Proposal Addendums must be submitted to:
(Prior Coordination Required)
Major Jason Paul
AFRL/RYMD
2241 Avionics Circle, Bldg 620 Wright-Patterson AFB, OH 45433-7303 If classified addendums/appendices are required, please contact both the contracting and technical POCs for delivery instructions prior to submitting the classified addendums/appendices.
The Contracting POC identified in this BAA cannot receive and/or accept Classified Addendums/appendices.
If a classified Addendum/appendix is delivered to the Technical POC, a time/date receipt must be prepared by the offeror, signed and dated by the Technical POC, and delivered to the Contracting POC no later than the time the unclassified Proposal is delivered to the Contracting POC.
Any Classified Addendums/appendices submitted are included in the page limitations as identified in the BAA.
V. Proposal Review Information
1. Evaluation Criteria: The selection of one or more sources for award will be based on an evaluation of each offeror’s proposal (both technical and cost/price aspects) to determine the overall merit of the proposal in response to the announcement, as well as on Agency need and funding availability. The technical aspect, which is ranked as the first order of priority, shall be evaluated based on the following criteria. Both the Basic ID/IQ and the Task Order 0001 technical evaluation criteria are listed in descending order of importance:
a. Technical: Basic ID/IQ Contract (Deemed more important than Task Order 0001):
1. Unique and innovative approach proposed to accomplish the technical objectives. New and creative solutions and/or advances in knowledge, understanding, technology, and the state of the art.
2. The offeror’s understanding of the scope of the technical effort.
3. Soundness of the offeror’s technical approach.
4. Availability of qualified technical personnel and their experience with the applicable technologies.
5. Availability, from any source, of necessary research, test, laboratory, or shop facilities.
b. Technical: Task Order 0001 (Deemed less important than the Basic ID/IQ):
1. Unique and innovative approach proposed to accomplish the technical objectives. New and creative solutions and/or advances in knowledge, understanding, technology, and the state of the art.
2. The offeror’s understanding of the scope of the technical effort.
3. Soundness of the offeror’s technical approach.
4. The potential for AFRL to transition the research and development deliverables to future Government needs. Any proposed restriction on technical data or computer software will be considered.
5. Availability of qualified technical personnel and their experience with the applicable technologies.
6. Availability, from any source, of necessary research, test, laboratory, or shop facilities.
c. Cost/Price: Task Order 0001
Cost/Price includes the reasonableness and realism of the proposed cost and fee and consideration of proposed budgets and funding profiles. Cost/Price is a substantial factor, but ranked as the second order of priority to technical. (If an offeror proposes the use of GFP other than any GFP identified in this BAA, and that proposed GFP provides the offeror an unfair competitive advantage, then FAR 45.202 requires rental equivalent be applied to the Cost Factor for evaluation purposes only).
d. Proposal Risk Assessment: Basic ID/IQ Contract and Task Order 0001
Proposal risk for technical, cost, and schedule will be assessed as part of the evaluation of the above evaluation criteria. Proposal risk relates to the identification and assessment of the risks associated with an offeror's proposed approach as it relates to accomplishing the proposed effort. Tradeoffs of the assessed risk will be weighed against the potential payoff.
2. Review and Selection Process
a. Categories: The technical and cost proposals will be evaluated at the same time and categorized as follows:
Category I: Demonstrates technical merit; is important to agency programs. The offeror presents relevant experience and access to adequate resources. Risk is acceptable. The cost/price is reasonable and realistic. Proposals in Category I are recommended for acceptance (subject to availability of funds) and normally are displaced only by other Category I proposals.
Category II: Demonstrates technical merit; is important to agency programs; and presents relevant experience and access to adequate resources; but requires further development. Risk is acceptable. The cost/price is reasonable and realistic. Category II proposals are recommended for acceptance, but at a lower priority than Category I.
Category III: Does not demonstrate technical merit; does not meet agency needs; does not present adequate experience or resources; the risk level is unacceptable; or the cost/price is not reasonable or realistic.
b. No other evaluation criteria will be used. The Air Force reserves the right to select for award any, all, part or none of each proposal received.
VI. Award Administration Information
1. Award Notices: Offerors will be notified whether their proposal is recommended for award, by e-mail, on or 28 February 2014. The notification is not to be construed to mean the award of a contract is assured, as availability of funds and successful negotiations are prerequisites to any award.
2. Administrative and National Policy Requirements: See Section I.
3. Reporting: Refer to the attached Contract Data Requirements List (CDRL).
VII. Agency Contacts
1. Address technical questions to: Major Jason Paul, AFRL/RYMD, phone 937-528-8127, email: jason.paul@us.af.mil, AFRL mailing address: Bldg 620, 2241 Avionics Circle, Wright-Patterson AFB, OH 45433-7303.
2. Address contracting questions to: Marcus Duff, Contract Negotiator, 2310 Eighth St, Bldg 167, Wright Patterson AFB, OH 45433-7801, (937) 255-6351 marcus.duff@us.af.mil or Joel B. Harrah, Contracting Officer, 2310 Eighth St, Bldg 167, Wright Patterson AFB, OH 45433-7801, (937) 255-5306, joel.harrah@us.af.mil.
VIII. Other Information
1. Acquisition of Commercial Items: Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government’s requirement with a commercial item within 15 days of this notice.
2. Support contractors: Only Government employees will evaluate proposals for selection. Offerors are advised that employees of commercial firms under contract to the Government may be used to administratively process proposals, monitor contract performance, or perform other administrative duties requiring access to other contractors' proprietary information.
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .