BAA-RQKS-2014-002-Basic-SOO.doc
DOC document 55 KB Posted
- Solicitation number
- BAA-RQKS-2014-002
About this file
Basic IDIQ Statement of Objectives (SOO)
View the file
Other files
| File | Type | Posted |
|---|---|---|
| BAA-RQKS-2014-002-Amd1.doc | DOC document | |
| BAA-RQKS-2014-002-DD254-2.pdf | ||
| BAA-RQKS-2014-002-ModelK.pdf | ||
| BAA-RQKS-2014-002-SectionK.pdf | ||
| BAA-RQKS-2014-002-DD254-1.pdf | ||
| BAA-RQKS-2014-002.doc | DOC document | |
| BAA-RQKS-2014-002-TO1-SOO.doc | DOC document | |
| BAA-RQKS-2014-002-CDRLs.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Contested Environment Radio Frequency Exploitation and Research
(CERFER)
STATEMENT OF OBJECTIVES (SOO)
BASIC IDIQ
1.0 Technical Background:
The effectiveness of sensing platforms operating in contested areas is problematic. In the case of active sensing, contested areas can contain competing signals that can disrupt and degrade sensing activities. While these contested areas present a challenge to active sensing, they also provide an opportunity for passive sensing. Passive sensing seeks to exploit the native signals in these contested areas for sensing activities. Passive sensing is also a solution to the problem of operating sensing platforms within the ever dwindling frequency spectrum.
In order to achieve sensing effectiveness in contested areas for active and passive sensing, technological advances to sensing algorithms, software and hardware are required. The Sensors Directorate seeks to develop new technologies and techniques to address these and other RF exploitation limitations.
2.0 Objective:
The objective of CERFER is to advance RF sensing technology with novel hardware, software and algorithmic approaches for agile and flexible sensing which bring to bear all available resources (e.g., spatial diversity, waveform diversity, transmit and receive adaptivity, signals of opportunity, etc.,) to maximize exploitation performance. Specifically, the goal is to address problems of concurrent detection, tracking, imaging, and classification/identification of targets within contested and challenging environments with single and distributed sensing architectures. This will include the development of models, hardware, software, algorithms and techniques spanning basic, applied and advanced research for both active and passive sensing.
3.0 Scope:
In order to achieve the objectives of this effort, advances in sensor subsystems are required. In particular, this requires attention to the areas of hardware, software and algorithm solutions to detect, track, image and identify targets within contested areas. This includes exploiting passive/active signals in a single or distributed architecture. Methods for measurements and validation will also be needed to verify any improvement. Modeling will also be used in these efforts. Section 4 details the research areas that will be addressed to achieve the objectives of CERFER.
4.0 Areas of Research:
4.1 Program planning, systems engineering, development, test plan development, vendor and government agency coordination and logistics planning.
4.2 Perform system, subsystem and algorithm performance testing of RF and similar sensor hardware/software. This includes sensor characterization and calibration, algorithm assessment/optimization and development/evaluation of real-time or off-line signal/data processing.
4.3 Distributed (cooperative) and (non-cooperative) sensing architectures. This includes hardware, software and algorithms for detecting, tracking, imaging and identification of stationary and moving targets
4.3.1 Distributed active (cooperative) and passive (non-cooperative) detection. This activity includes AMTI (Airborne Moving Target Indication) and SMTI (Surface Moving Target Indication) of militarily-relevant targets. The active component of this task primarily addresses multiple-input multiple-output (MIMO) approaches. The passive component primarily uses signals-of-opportunity to include (but are not limited to) radar transmitters, commercial broadcast signals, GPS and other navigation waveforms, cellular transmissions, WiMax, and related signal classes.
4.3.2 Distributed active (cooperative) and passive (non-cooperative) tracking. This activity develops novel methods for tracking targets using active distributed, and passive radar systems, including (but not limited to) schemes to address ambiguities, ghosting, and target association between multiple receivers.
4.3.3 Distributed active and passive imaging. This activity generally develops and matures image formation algorithms commensurate with spatially-distributed approaches (e.g., bistatic backprojection, etc.) to improve image resolution and other relevant performance metrics to enable human analyst image interpretation and Automatic Target Recognition (ATR). Techniques for addressing corrupted or unavailable meta-data, fusing signals from multiple transmitters and frequency bands, combining data from multiple receivers, estimating and compensating target motion, and other related imaging challenges are also considered.
4.3.4 Distributed active and passive ID/classification. This activity’s goal is to develop of ID techniques based on the salient physical scattering of the targets. Techniques are not necessarily based on existing monostatic ATR state-of-the-art techniques and may include other innovative approaches.
4.4 Synthetic Aperture Radar (SAR) detection, tracking, imaging and identification.
4.4.1 Detection: change detection and related processing. Examples include: video SAR Coherent Change Detection (CCD), video Noncoherent Change Detection (NCD). Issues of importance include real-time and near-real-time processing under multiple size, weight, and power (SWaP) constraints.
4.4.2 Tracking: moving target detection, geolocation, and tracking. Examples include long-duration move-stop-move tracking of vehicles and dismounts in challenging environments.
4.4.3 Imaging: Examples include: Video SAR, imaging to a Digital Elevation Map (DEM). DEM generation. 3-D imaging, interferometric processing, and multistatic imageing. Issues of importance include real-time and near-real-time processing under multiple size, weight, and power (SWaP) constraints
4.4.4 Identification/classification: target discrimination, classification, and ID. Examples include ATR of vehicles and dismounts, using wide angle SAR data.
4.5 Fully Adaptive Radar (FAR) (cognitive radar) detection, tracking, imaging and identification.
4.5.1 Detection: This effort seeks novel algorithms for closed loop radar detection from single as well as distributed sensing constructs with extensive performance benchmarking using simulated and measured data-sets. Relevant performance metrics for this purpose need to be developed.
4.5.2 Tracking: This effort is devoted to ameliorating the data association problem inherent to closed loop radar tracking and seeks novel approaches for the radar tracking problem from single and distributed sensing constructs. Extensive performance analysis and benchmarking need to be undertaken.
4.5.3 Imaging: This effort is devoted to ameliorating the data association problem inherent to closed loop radar tracking and seeks novel approaches for the radar tracking problem from single and distributed sensing constructs. Extensive performance analysis and benchmarking need to be undertaken.
4.5.4 Identification/classification: This effort is devoted to closed loop radar classification from single as well as distributed sensing constructs. Novel approaches to mitigate the curse of dimensionality are sought. Performance evaluation of these techniques using simulated and measured data sets needs to be carried out.
4.6 Software development for hardware integration, display/visualization and data compression. Examples of data compression include image and phase history data compression that preserves SAR CCD quality.
4.7 Advanced RF exploitation theory and algorithm development, optimization, and performance prediction for RF detection, tracking, imaging, and classification/ID with an emphasis on the challenges of contested anti-access area denial (A2/AD) and RF-congested environments. This includes lower frequency exploitation (eg foliage and building penetration).
4.8 Implementation and optimization of algorithms on high performance data processors, e.g., to realize large-area real-time operations. Develop techniques and technologies to counter the size, weight, and power (SWAP) constraints of sensing platforms for contested environments (RPAs,”weapons as sensors”, etc).
4.9 Development of models and simulations of current/future implementations of RF sensors using high level programming languages, and engineering and scientific software packages, such as MATLAB, MATHCAD, SIMULINK, PYTHON, LINUX, C, C++, and VHDL. Documentation within the code is also required.
4.10 Design, fabricate, program, operate and calibrate prototype and interface hardware for current/future implementations of RF and similar sensors. This includes hardware and software for test setups, special purpose test equipment, hardware interfaces to existing systems, test circuits, and cables.
4.11 Conduct appropriate ground, airborne and space tests to collect data from simulated threats at test ranges and to collect background clutter to develop and evaluate electronic protection techniques.
4.12 On-site contractor support will also be needed to work alongside government personnel, which will require base support. For each task, repeatability of experiments and clear documentation are critical.
5.0 Required Expertise
The Offeror shall accomplish multiple separate and independent research projects related to specific Air Force needs in the areas of sensor/sensing phenomenology, signal processing, hardware/software implementation, circuit fabrication, modeling/simulation, RF design and test/measurement. Individual Task Ordered research projects may be independent or complementary to one or more other already ongoing and separately funded research contracts.
6.0 Management Objectives
Management objectives include maintaining clear government visibility into program schedule, performance, and risk while allowing the contractor maximum flexibility and innovation to manage the effort. This would include program schedule, cost, performance, risks, associate contractor agreements, subcontracts and data to meet contract objectives that satisfies all technical requirements.
6.1 Meetings. Host a post-award conference within 30 days of contract award. Program management reviews and technical interchange meetings for each individual delivery order will be required. Agendas for all meetings will be developed jointly.
6.2 Systems Engineering. Disciplined systems engineering approach tailored to meet the Program and Contract Objectives is required to provide an integrated development program.
6.3 Materials. The contractor shall procure materials if they are not available through government channels and are required for the performance of this program. The materials shall consist of test equipment, supplies, replacement and new parts, subassemblies, manufacturer's literature, and manuals which are not available through government channels and/or not available in sufficient time to meet the urgency of requirements. Flight/ground testing requirements may involve the use of contractor-owned/operated or government-owned/operated testbed aircraft.
7.0 OPSEC
General OPSEC procedures, policies and awareness is required in an effort to reduce program vulnerability from successful adversary collection and exploitation of critical information. OPSEC will be applied throughout the lifecycle of the contract. The Critical Information List will be provided upon request by the RYOY Security Office. While working on the government installation OPSEC will be provided by the RYOY Security Office.
8.0 Deliverables
8.1 Data Items: Data shall be delivered in accordance with the CDRLs identified in the attached listing.
8.2 Software: Software deliverables are anticipated periodically, and will be specified in the individual task orders.
8.3 Hardware: Hardware deliverables are anticipated from periodically, and will be specified in the individual task orders.
9.0 Other Requirements:
9.1 Government Furnished Property (GFP): No GFP is expected to be required or furnished on the first Task Order. The need for GFP on future task orders will be addressed on a case-by-case basis.
9.2 Safety: The contractor must comply with all federal, state, and local safety and environmental regulations.
9.3 Security Classification: Refer to the DD254 in the TO.
9.4 Requires an approved Safety Plan IAW AFI 91-202 AFRL Supplement 1 before any experiment may be conducted. The contractor must also comply with all Air Force safety and environmental regulations.
9.5 The contractor’s on-site personnel shall comply with the safety and accident prevention clauses, Air Force Occupational and Environmental Safety, Fire Prevention, and Health (AFOSH) Program, AFT 91-301, and the Air Force Occupational and Health Standards. All test operations shall be accomplished in accordance with required safety AFIs and the Laboratory System Safety Program.
9.6 The contractor must comply with system safety requirements contained in MIL-STD 882D, Section 4 “General Requirements” for any deliverable systems or hardware. The contractor must identify safety-critical components of those systems or hardware, and software interfaces with those components. The contractor must test and verify the safety-critical hardware and software for safety acceptance.
9.7 Supplemental Safety Documents Section:
9.7.1 AFRLI 99-101, AFRL Test Guide
9.7.2 AFRLI 91-101, Laboratory System Safety Program
9.7.3 AFI 91-202, AFRL Supplement 1
9.7.4 MIL-STD 882D, Section 4 “General Requirements”
9.8 Flight Test: Comply with all requirements of the Technical and Safety Review Board reviews and requirements associated with any field or flight tests in addition to all Air Force policies, regulations, and instructions related to flight testing.
9.9 General Security Requirements: General OPSEC procedures, policies and awareness is required in an effort to reduce program vulnerability from successful adversary collection and exploitation of critical information. OPSEC will be applied throughout the lifecycle of the contract. The Critical Information List will be provided upon request by the RYY Security Office. While working on the government installation, OPSEC will be provided by the RYOY Security Office.
SOURCE SELECTION INFORMATION
See FAR 3.104
File details come from the government source that posted it. Updated .