B8 Purchase Description HD Mechanic Training Aids.pdf

RFQ W912NS20Q4021 Purchase Description

RTSM Training Aids

CLIN 0001) Diesel Engine Cutaway (1 Each)

Salient Characteristics:

Mil Spec 6.5 Turbo Diesel

Sectioned block, components, head etc.

Painted with different colors

Height approx. 48“ from floor to top of engine

Mounted on heavy duty stand with casters o No less than two casters shall be lockable/have a brake to keep stand from rolling when being utilized for instruction o Black or Blue Color

Additional Information/Intended use: 6.5 liter Diesel Engine is used in the classroom setting. Needs to be operational at a very low speed in order to explain the 4 stroke internal combustion engine. Showing the pistons, valves, crankshaft, camshaft, and timing chain with gear, anything that can be made to move would benefit the overall explanation of how the engine works. Air intake, and Exhaust ports different colors representing clean air intake versus dirty air exhaust. Colored ports showing the internal cooling system of the engine. Fuel system needs to be an additional color. Oil passages a separate color.

CLIN 0002) Diesel Engine Display Stand CAT C7 (2 Each)

Salient Characteristics:

Heavy duty frame powder coated, black or blue

Rotate and adjustable

Height approx. 48“ from floor to top of mounted engine

On casters, No less than two casters shall be lockable/have a brake to keep stand from rolling when being utilized for instruction

Additional Information/Intended use: These stands are to be used to put our two C7 engines on. So students would have easy access to them. Stands need to be able to rotate and support the weight of the engines. They will be stands only, no diagnostics will be used on this, and they are for static display. Engines to be provided by customer.

CLIN 0003) Diesel Engine Display Stand CAT C15 (1 Each)

Salient Characteristics:

Heavy duty frame powder coated, black or blue

Rotate and adjustable

Height approx. 48“ from floor to top of mounted engine

On casters, No less than two casters shall be lockable/have a brake to keep stand from rolling when being utilized for instruction

Additional Information/Intended use: These stands are to be used to put our C15 engine

on. So students would have easy access to them. Stands need to be able to rotate and support the weight of the engines. This will be stand only, no diagnostics will be used on this, and they are for static display. Engine to be provided by customer.

CLIN 0004) Ford HEUI Pump and Injector Cutaway (1 Each)

Salient Characteristics:

Stanadyne pump fully sectioned and painted

Ford HEUI injector fully sectioned and painted

Mounted on stand painted black or blue

Able to set on tabletop

Additional Information/Intended use: Used to show the different ports inside the HEUI pump and the Injectors, preferably one pump with 8 injectors cutaway to show the internal components of the injectors using different colors to represent oil fuel coming in and excess leaving the injectors. This is a static display only.

CLIN 0005) Truck Airbrake Trainer with ABS and ATC (1 Each)

Salient Characteristics:

Fully operational truck airbrake trainer

Minimum of 6 airbrake chambers

Fault insertion

OEM system with diagnostic plug

Factory colored hoses

Trainer should end at the brake chambers, no axles needed

On mobile stand, painted black or blue, Mounted on a white board for easily identifiable components of the air brake system, components properly labeled

Power supply included, std 110v U.S. Plug

Additional Information/Intended use: This trainer will be used in the shop environment to further explain to students how the air brake system works. The trainer needs to be mobile in order to move around for the most optimal training environment.

CLIN 0006) Truck Air Chamber Cutaway (1 Each)

Salient Characteristics:

Sectioned and painted

40/40 park brake chamber

Able to set on tabletop

Additional Information/Intended use: Used with the Truck airbrake trainer to show how the brake camber works internally. This is a static display

CLIN 0007) Allison Transmission Cutaway(1 Each)

Salient Characteristics:

Mil Spec Allison MD3700SP W/ transfer case

Sectioned case, torque converter, transfer case and internal drums

Painted with different colors

Height approx. 48“ from floor to top of transmission

Mounted on heavy duty stand with casters o No less than two casters shall be lockable/have a brake to keep stand from rolling when being utilized for instruction o Black or Blue Color

Additional Information/Intended use: 3700SP is used in the classroom setting. Showing the internal components of the transmission to include the different drums, bands pistons, clutches, steels, and pump. Sectioned torque convertor to show the various chambers, stator and turbine sections. Transfer case to show the front wheel engagement, transfer engagement and cross-section of sprockets/gears and chain.

CLIN Description Qty U/I Price Ea Total Price

0001 Diesel Engine Cutaway 1 Ea

0002 Diesel Engine Display Stand CAT C7

2 Ea

0003 Diesel Engine Display Stand CAT C15

1 Ea

0004 HEUI Pump and Injector Cutaway

1 Ea

0005 Truck Airbrake Trainer with ABS and ATC

1 Ea

0006 Truck Air Chamber Cutaway

1 Ea

0007 Allison 3700SP transmission cutaway

1 Ea

0008 Freight: FOB Destination (If Applicable)

1 Ea

Grand Total

Company Name Cage Code

POC Name Phone #

POC Email

Past Performance:

Customer Company Name POC Name Phone # Contract#

1)

2)