B50330 Clayton Co OM Demolition VOL_1 Attachm.pdf

PDF 4 MB Posted

Attached to
IFB B50330 Clayton County Multipurpose Operations & Maintenance Facility ¿ Demolition
Solicitation number
PE-97100-NONST-2024-000000053
Issued by
Clayton County, Georgia

About this file

This document is an Invitation for Bids (IFB) issued by the Metropolitan Atlanta Rapid Transit Authority (MARTA) for the demolition of two existing buildings, on-site utilities, pavement, and other site features located at 5163 and 5265 Old Dixie Hwy in Forest Park, Georgia. The project generally consists of demolishing the structures, hauling away recyclable materials, installing perimeter fencing and erosion control measures, and stabilizing disturbed areas. The project will be awarded under a single contract, and the contractor will be responsible for obtaining necessary permits, coordinating with utilities, and completing the work in a timely manner.

The bid document provides details on wage rates, labor standards, and other contract forms. Payment for the work will be based on unit prices and a materials allowance provision. MARTA requires the contractor to submit a schedule of values, network analysis project schedule, and other documentation to monitor and report on the project's progress. The Authority reserves the right to direct the contractor to perform additional work within the general scope of the project if necessary.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Volume 1 of 2 - Specifications

CLAYTON COUNTY

MULTIPURPOSE OPERATIONS

& MAINTENANCE FACILITY -

DEMOLITION

Project Number / Contract Number

32242 & 70002 / B50330

CAPITAL PROGRAMS DELIVERY &

DESIGN, ENGINEERING, AND INFRASTRUCTURE

DocuSign Envelope ID: 06217E30-5F4A-4429-8CAB-31400736C058

This page is intentionally left blank for double-sided printing.

B50330 – VOLUME 1 TOC - 1

VOLUME 1 - SPECIFICATIONS

TABLE OF CONTENTS

CONDITIONS OF THE CONTRACT

Minimum Wage Rates Labor Standards Provisions

CONTRACT FORMS

Application for Access to MARTA Facilities Application for Progress Payment Affidavit of Final Payment and Final Release

DIVISION 1 - GENERAL REQUIREMENTS

011100 Summary of Work 012116 Undefined Work Provision 012973 Schedule of Values 012977 Measurement Requirements for Payment 013119 Project Meetings

013216.13 Network Analysis Project Schedule

- Appendix A: Standard Schedule Milestones

013233 Photographic Documentation 013300 Submittal Procedures 013523 Authority Safety Requirements

- Exhibit A: SAQ-PL-1004, MARTA Construction Safety Plan, Revision 4, dated August 2020

- Attachment A: Contractor Safety Experience Form

- Attachment B: EHS-FO-1008, Competent Person Designation Form

- Attachment C: EHS-FO-0101, Contractor’s Weekly EHS Report

- Attachment D: EHS-FO-0103, Project Monthly Safety Report

- Attachment E: EHS-FO-1007, Project-Specific Safety and Health Program

Plan

- Attachment F: Critical Lift Plan

- Attachment G: EHS-FO-1012, Impairment Permit

- Attachment H: SAQ-FO-1025, Permit Form for Confined Space Entry

- Attachment I: Hot Work Permit

- Attachment J: EHS-FO-1010, Critical Task Analysis

- Attachment K: EHS-FO-1014, Preliminary Construction Incident Investigation

Form

013543 Environmental Procedures

- Exhibit A: EMS-FO-5087, Compliance Evaluation Questionnaire for Offsite Waste Transporters and Management Facilities

- Exhibit B: EMS-FO-1034, Approval Form for Offsite Waste Management Facilities

- Exhibit C: EMS-FO-5085, Approved Waste Disposal Facilities

- Exhibit D: EMS-PL-5125, Regulated Waste Management Plan

014323 Authority’s Testing Services 015000 Temporary Facilities 015111 Temporary Utility Support 015114 Temporary Electricity and Lighting 015136 Temporary Water 015214 Contractor’s Field Office

B50330 – VOLUME 1 TOC - 2

015526 Traffic Control 015639 Temporary Tree and Plant Protection 015711 Temporary Security 015713 Temporary Erosion and Sediment Control 015720 Temporary Controls and Barriers 017113 Mobilization 017400 Cleaning and Waste Management

DIVISION 2 - EXISTING CONDITIONS

024100 Demolition 028000 Hazardous Materials Management 028233 Removal and Disposal of Asbestos Containing Materials

DIVISION 3 - CONCRETE

033000 Cast-in-Place Concrete

DIVISION 32 - EXTERIOR IMPROVEMENTS

323113 Chain Link Fences and Gates

END OF VOLUME 1 TABLE OF CONTENTS

D E P A R T M E N T O F C A P I T AL P R O G R A M S , E X P A N S I ON & I N N O V A T I ON | O F F I C E O F I N F R A S T R U C T UR E

CONDITIONS OF THE CONTRACT

D E P A R T M E N T O F C A P I T AL P R O G R AM S , E X P A N S I ON & I N N O V A T I ON | O F F I C E O F I N F R A S T R U C T UR E

MINIMUM WAGE RATES

The Minimum Wage Rates are those established, for the listed trade working at the job site, by the U.S.

Secretary of Labor. The rates have been established in accordance with the stipulations contained in the Davis-Bacon Act, as amended, and have been established as being the rates for the corresponding classes of workers employed for projects of a similar character in the locality where the Work is to be performed. The Contractor shall pay wages and fringe benefits at rates not less than those stipulated for each listed trade. A mistake in the indicated wages and fringe benefits will not entitle the Contractor to cancel the Project, to increase the Contract price, or to receive additional payments and recoveries.

"General Decision Number: GA20240303 01/05/2024

Superseded General Decision Number: GA20230303

State: Georgia

Construction Type: Building BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories)

County: Clayton County in Georgia.

BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories).

Note: Contracts subject to the Davis-Bacon Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

Please note that these Executive Orders apply to covered contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but do not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(1).

|If the contract is entered |. Executive Order 14026 | |into on or after January 30, | generally applies to the | |2022, or the contract is | contract. | |renewed or extended (e.g., an |. The contractor must pay | |option is exercised) on or | all covered workers at | |after January 30, 2022: | least $17.20 per hour (or | | | the applicable wage rate | | | listed on this wage | | | determination, if it is | | | higher) for all hours | | | spent performing on the | | | contract in 2024. | |If the contract was awarded on|. Executive Order 13658 | |or between January 1, 2015 and| generally applies to the | |January 29, 2022, and the | contract. | |contract is not renewed or |. The contractor must pay all| |extended on or after January | covered workers at least | |30, 2022: | $12.90 per hour (or the | | | applicable wage rate listed| | | on this wage determination,| | | if it is higher) for all | | | hours spent performing on | | | that contract in 2024. |

The applicable Executive Order minimum wage rate will be adjusted annually. If this contract is covered by one of the Executive Orders and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must still submit a conformance request.

Additional information on contractor requirements and worker protections under the Executive Orders is available at http://www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/05/2024

ASBE0048-003 04/05/2023

Rates Fringes

ASBESTOS WORKER/HEAT & FROST

INSULATOR........................$ 28.09 17.19

CARP1263-001 10/01/2023

Rates Fringes

MILLWRIGHT.......................$ 31.58 17.05

ELEC0613-004 09/02/2023

Rates Fringes

ELECTRICIAN (Excludes Low Voltage Wiring)..................$ 34.50 32%

ELEC0613-005 09/02/2023

Rates Fringes

ELECTRICIAN (Low Voltage Wiring)..........................$ 34.50 32%

ENGI0926-004 01/01/2022

Rates Fringes

POWER EQUIPMENT OPERATOR:

Backhoe/Excavator/Trackhoe..$ 24.75 13.28

ENGI0926-005 07/01/2022

Rates Fringes

POWER EQUIPMENT OPERATOR:

Crane.......................$ 34.66 13.83

ENGI0926-006 07/01/2020

Rates Fringes

POWER EQUIPMENT OPERATOR:

Forklift....................$ 33.18 13.83

IRON0387-002 01/01/2022

Rates Fringes

IRONWORKER, ORNAMENTAL...........$ 28.64 13.92

IRONWORKER, STRUCTURAL...........$ 28.64 13.92

PLUM0072-003 08/01/2021

Rates Fringes

PIPEFITTER

(Excluding HVAC Pipe and Unit Installation)..........$ 33.68 16.11

(HVAC Pipe Installation Only).......................$ 31.68 16.11 (HVAC Unit Installation Only).......................$ 31.68 16.11

PLUMBER..........................$ 33.68 16.11

SHEE0085-022 07/01/2023

Rates Fringes

SHEET METAL WORKER (Excludes HVAC Duct Installation)..........$ 34.58 16.49 SHEET METAL WORKER (HVAC Duct Installation Only)...............$ 34.68 15.24

UAVG-GA-0001 01/15/2023

Rates Fringes

IRONWORKER, REINFORCING..........$ 28.89 16.40

SUGA2017-018 04/15/2021

Rates Fringes

CARPENTER (Form Work Only).......$ 18.02 0.00

CARPENTER, Excludes Form Work....$ 21.06 3.54

CEMENT MASON/CONCRETE FINISHER...$ 10.00 ** 0.00

GLAZIER..........................$ 21.77 6.36

INSTALLER - GUARDRAIL............$ 20.00 0.00

LABORER: Asphalt, Includes Raker, Shoveler, Spreader and Distributor......................$ 15.69 ** 0.00

LABORER: Common or General......$ 14.60 ** 0.00

LABORER: Pipelayer..............$ 12.55 ** 1.90

OPERATOR: Bobcat/Skid Steer/Skid Loader................$ 20.24 0.00

OPERATOR: Bulldozer.............$ 15.23 ** 0.00

OPERATOR: Grader/Blade..........$ 16.80 ** 0.00

OPERATOR: Loader................$ 21.32 0.00

OPERATOR: Roller................$ 16.82 ** 1.19

PAINTER (Brush and Roller).......$ 16.14 ** 0.00

PAINTER: Spray..................$ 16.29 ** 0.00

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

** Workers in this classification may be entitled to a higher minimum wage under Executive Order 14026 ($17.20) or 13658 ($12.90). Please see the Note at the top of the wage determination for more information. Please also note that the minimum wage requirements of Executive Order 14026 are not currently being enforced as to any contract or subcontract to which the states of Texas, Louisiana, or Mississippi, including their agencies, are a party.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at https://www.dol.gov/agencies/whd/government-contracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (iii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of ""identifiers"" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than ""SU"" or ""UAVG"" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the ""SU"" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour National Office because National Office has responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.) and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division

U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION"

March 2011 Labor Standards

METROPOLITAN ATLANTA RAPID TRANSIT AUTHORITY

LABOR STANDARDS PROVISIONS

DAVIS‐BACON ACT

COPELAND ANTI‐KICKBACK ACT

CONTRACT WORK HOURS AND SAFETY STANDARDS ACT

(1) Minimum Wages ‐ All laborers and mechanics employed or working upon the site of the work (or under the United States Housing Act of 1937 or under the Housing Act of 1949 in the construction or development of the Project), will be paid unconditionally and not less often than once a week, and without subsequent deduction or rebate on any account (except such payroll deductions as are permitted by regulations issued by the Secretary of Labor under the Copeland Act (29 CFR Part 3), the full amount of wages and bona fide fringe benefits (or cash equivalents thereof) due at time of payment computed at rates not less than those contained in the wage determination of the Secretary of Labor which is attached hereto and made a part hereof, regardless of any contractual relationship which may be alleged to exist between the Contractor and such laborers and mechanics.

Contributions made or costs reasonably anticipated for bona fide fringe benefits under section 1(b)(2) of the Davis‐Bacon Act on behalf of laborers or mechanics are considered wages paid to such laborers or mechanics, subject to the provisions of paragraph (1)(d) of this section; also, regular contributions made or costs incurred for more than a weekly period (but not less often than quarterly) under plans, funds, or programs which cover the particular weekly period, are deemed to be constructively made or incurred during such weekly period. Such laborers and mechanics shall be paid the appropriate wage rate and fringe benefits on the wage determination for the classification of work actually performed, without regard to skill, except as provided in 29 CFR Part 5.5(a)(4). Laborers or mechanics performing work in more than one classification may be compensated at the rate specified for each classification for the time actually worked therein: Provided that the employer's payroll records accurately set forth the time spent in each classification in which work is performed. The wage determination (including any additional classifications and wage rates conformed under paragraph (1)(a) of this section) and the Davis‐Bacon poster (WH‐1321) shall be posted at all times by the Contractor and its subcontractors at the site of the work in a prominent and accessible place where it can be easily seen by the workers.

(a) The Authority requires that any class of laborers or mechanics, including helpers, which is not listed in the wage determination and which is to be employed under the Contract shall be classified in conformance with the wage determination. The Authority shall approve an additional classification and wage rate and fringe benefits therefore only when the following criteria have been met:

(1) Except with respect to helpers as defined as 29 CFR 5.2(n)(4), the work to be performed by the classification requested is not performed by a classification in the wage determination; and

(2) The classification is utilized in the area by the construction industry; and

(3) The proposed wage rate, including any bona fide fringe benefits, bears a reasonable relationship to the wage rates contained in the wage determination; and

(4) With respect to helpers as defined in 29 CFR 5.2(n)(4), such a classification prevails in the area in which the work is performed.

(b) If the Contractor and the laborers and mechanics to be employed in the classification (if known), or their representatives, and the Authority agree on the classification and wage rate (including the amount designated for fringe benefits where appropriate), a report of the action taken shall be sent by the Authority to the Administrator of the Wage and Hour Division, Employment Standards Administration, U.S. Department of Labor, Washington, DC 20210. The Administrator, or an authorized representative, will approve, modify, or disapprove every additional classification action within 30 days of receipt and so advise the Authority or will notify the Authority within the 30‐day period that additional time is necessary.

(c) In the event the Contractor, the laborers or mechanics to be employed in the classification or their representatives, and the Authority do not agree on the proposed classification and wage rate (including the amount designated for fringe benefits, where appropriate), the Authority shall refer the questions, including the views of all interested parties and the recommendation of the Authority, to the Administrator for determination. The Administrator, or an authorized representative, will issue a determination within 30 days of receipt and so advise the Authority or will notify the Authority within the 30‐day period that additional time is necessary.

(d) The wage rate (including fringe benefits where appropriate) determined pursuant to paragraphs (a)(1)(ii) (B) or (C) of 29 CFR Section 5.5, shall be paid to all workers performing work in the classification under this Contract from the first day on which work is performed in the classification.

(e) Whenever the minimum wage rate prescribed in the Contract for a class of laborers or mechanics includes a fringe benefit which is not expressed as an hourly rate, the Contractor shall either pay the benefit as stated in the wage determination or shall pay another bona fide fringe benefit or an hourly cash equivalent thereof.

(f) If the Contractor does not make payments to a trustee or other third person, the Contractor may consider as part of the wages of any laborer or mechanic the amount of any costs reasonably anticipated in providing bona fide fringe benefits under a plan or program, Provided, That the Secretary of Labor has found, upon the written request of the Contractor, that the applicable standards of the Davis‐Bacon Act have been met.

The Secretary of Labor may require the Contractor to set aside in a separate account assets for the meeting of obligations under the plan or program.

(2) Withholding ‐ The Authority shall upon its own action or upon written request of an authorized representative of the Department of Labor withhold or cause to be withheld from the Contractor under this Contract or any other Federal contract with the same prime Contractor, or any other federally‐ assisted contract subject to Davis‐Bacon prevailing wage requirements, which is held by the same prime Contractor, so much of the accrued payments or advances as may be considered necessary to pay laborers and mechanics, including apprentices, trainees, and helpers, employed by the Contractor or any subcontractor the full amount of wages required by the Contract. In the event of failure to pay any laborer or mechanic, including any apprentice, trainee, or helper, employed or working on the site of the work (or under the United States Housing Act of 1937 or under the Housing Act of 1949 in the construction or development of the Project), all or part of the wages required by the Contract, the Authority may, after written notice to the Contractor, sponsor, applicant, or owner, take such action as may be necessary to cause the suspension of any further payment, advance, or guarantee of funds until such violations have ceased.

(3) Payrolls and Basic Records

(a) Payrolls and basic records relating thereto shall be maintained by the Contractor during the course of the work and preserved for a period of three years thereafter for all laborers and mechanics working at the site of the work (or under the United States Housing Act of 1937, or under the Housing Act of 1949, in the construction or development of the Project). Such records shall contain the name, address, and social security number of each such worker, his or her correct classification, hourly rates of wages paid (including rates of contributions or costs anticipated for bona fide fringe benefits or cash equivalents thereof of the types described in section 1(b)(2)(B) of the Davis‐Bacon Act), daily and weekly number of hours worked, deductions made and actual wages paid. Whenever the Secretary of Labor has found under 29 CFR 5.5(a)(1)(iv) that the wages of any laborer or mechanic include the amount of any costs reasonably anticipated in providing benefits under a plan or program described in section 1(b)(2)(B) of the Davis‐Bacon Act, the Contractor shall maintain records which show that the commitment to provide such benefits is enforceable, that the plan or program is financially responsible, and that the plan or program has been communicated in writing to the laborers or mechanics affected, and records which show the costs anticipated or the actual cost incurred in providing such benefits. Contractors employing apprentices or trainees under approved programs shall maintain written evidence of the registration of apprenticeship programs and certification of trainee programs, the registration of the apprentices and trainees, and the ratios and wage rates prescribed in the applicable programs.

(b) The Contractor shall submit weekly for each week in which any Contract work is performed a copy of all payrolls to the Authority for transmission to the Federal Transit Administration. The payrolls submitted shall set out accurately and completely all of the information required to be maintained under section 5.5(a)(3)(i) of Regulations, 29 CFR part 5. This information may be submitted in any form desired.

Optional Form WH‐347 is available for this purpose and may be purchased from the Superintendent of Documents (Federal Stock Number 029‐005‐00014‐ 1), U.S. Government Printing Office, Washington, DC 20402. The prime Contractor is responsible for the submission of copies of payrolls by all subcontractors.

(c) Each payroll submitted shall be accompanied by a "Statement of Compliance," signed by the Contractor or subcontractor or his or her agent who pays or supervises the payment of the persons employed under the Contract and shall certify the following:

(i) That the payroll for the payroll period contains the information required to be maintained under section 5.5(a)(3)(i) of Regulations, 29 CFR Part 5 and that such information is correct and complete;

(ii) That each laborer or mechanic (including each helper, apprentice, and trainee) employed on the Contract during the payroll period has been paid the full weekly wages earned, without rebate, either directly or indirectly, and that no deductions have been made either directly or indirectly from the full wages earned, other than permissible deductions as set forth in Regulations, 29 CFR part 3;

(iii) That each laborer or mechanic has been paid not less than the applicable wage rates and fringe benefits or cash equivalents for the classification of work performed, as specified in the applicable wage determination incorporated into the Contract.

(d) The weekly submission of a properly executed certification set forth on the reverse side of Optional Form WH‐347 shall satisfy the requirement for submission of the "Statement of Compliance" required by this section.

(e) The falsification of any of the above certifications may subject the Contractor or subcontractor to civil or criminal prosecution under Section 1001 of Title 18 and Section 231 of Title 31 of the United States Code.

(f) The Contractor or subcontractor shall make the records required under this section available for inspection, copying, or transcription by authorized representatives of the Federal Transit Administration or the Department of Labor, and shall permit such representatives to interview employees during working hours on the job. If the Contractor or subcontractor fails to submit the required records or to make them available, the Federal agency may, after written notice to the Contractor, sponsor, applicant, or owner, take such action as may be necessary to cause the suspension of any further payment, advance, or guarantee of funds.

Furthermore, failure to submit the required records upon request or to make such records available may be grounds for debarment action pursuant to 29 CFR 5.12.

(4) Apprentices and Trainees

(a) Apprentices ‐ Apprentices will be permitted to work at less than the predetermined rate for the work they performed when they are employed pursuant to and individually registered in a bona fide apprenticeship program registered with the U.S.

Department of Labor, Employment and Training Administration, Bureau of Apprenticeship and Training, or with a State Apprenticeship Agency recognized by the Bureau, or if a person is employed in his or her first 90 days of probationary employment as an apprentice in such an apprenticeship program, who is not individually registered in the program, but who has been certified by the Bureau of Apprenticeship and Training or a State Apprenticeship Agency (where appropriate) to be eligible for probationary employment as an apprentice. The allowable ratio of apprentices to journeymen on the job site in any craft classification shall not be greater than the ratio permitted to the Contractor as to the entire work force under the registered program. Any worker listed on a payroll at an apprentice wage rate, who is not registered or otherwise employed as stated above, shall be paid not less than the applicable wage rate on the wage determination for the classification of work actually performed. In addition, any apprentice performing work on the job site in excess of the ratio permitted under the registered program shall be paid not less than the applicable wage rate on the wage determination for the work actually performed. Where a Contractor is performing construction on a Project in a locality other than that in which its program is registered, the ratios and wage rates (expressed in percentages of the journeyman's hourly rate) specified in the Contractor's or subcontractor's registered program shall be observed. Every apprentice must be paid at not less than the rate specified in the registered program for the apprentice's level of progress, expressed as a percentage of the journeymen hourly rate specified in the applicable wage determination.

Apprentices shall be paid fringe benefits in accordance with the provisions of the apprenticeship program. If the apprenticeship program does not specify fringe benefits, apprentices must be paid the full amount of fringe benefits listed on the wage determination for the applicable classification. If the Administrator of the Wage and Hour Division of the U.S. Department of Labor determines that a different practice prevails for the applicable apprentice classification, fringes shall be paid in accordance with that determination. In the event the Bureau of Apprenticeship and Training, or a State Apprenticeship Agency recognized by the Bureau, withdraws approval of an apprenticeship program, the Contractor will no longer be permitted to utilize apprentices at less than the applicable predetermined rate for the work performed until an acceptable program is approved.

(b) Trainees ‐ Except as provided in 29 CFR 5.16, trainees will not be permitted to work at less than the predetermined rate for the work performed unless they are employed pursuant to and individually registered in a program which has received prior approval, evidenced by formal certification by the U.S. Department of Labor, Employment and Training Administration. The ratio of trainees to journeymen on the job site shall not be greater than permitted under the plan approved by the Employment and Training Administration.

Every trainee must be paid at not less than the rate specified in the approved program for the trainee's level of progress, expressed as a percentage of the journeyman hourly rate specified in the applicable wage determination. Trainees shall be paid fringe benefits in accordance with the provisions of the trainee program. If the trainee program does not mention fringe benefits, trainees shall be paid the full amount of fringe benefits listed on the wage determination unless the Administrator of the Wage and Hour Division determines that there is an apprenticeship program associated with the corresponding journeyman wage rate on the wage determination which provides for less than full fringe benefits for apprentices. Any employee listed on the payroll at a trainee rate that is not registered and participating in a training plan approved by the Employment and Training Administration shall be paid not less than the applicable wage rate on the wage determination for the classification of work actually performed. In addition, any trainee performing work on the job site in excess of the ratio permitted under the registered program shall be paid not less than the applicable wage rate on the wage determination for the work actually performed. In the event the Employment and Training Administration withdraws approval of a training program, the Contractor will no longer be permitted to utilize trainees at less than the applicable predetermined rate for the work performed until an acceptable program is approved.

(c) Equal employment opportunity ‐ The utilization of apprentices, trainees and journeymen under this part shall be in conformity with the equal employment opportunity requirements of Executive Order 11246, as amended, and 29 CFR part 30.

(5) Compliance with Copeland Act Requirements ‐ The Contractor shall comply with the requirements of 29 CFR Part 3, which are incorporated by reference in this Contract.

(6) Subcontracts ‐ The Contractor or subcontractor shall insert in any subcontracts the clauses contained in 29 CFR 5.5(a)(1) through (10) and such other clauses as the Federal Transit Administration may by appropriate instructions require, and also a clause requiring the subcontractors to include these clauses in any lower tier subcontracts. The prime Contractor shall be responsible for the compliance by any subcontractor or lower tier subcontractor with all the Contract clauses in 29 CFR 5.5.

(7) Contract Termination: Debarment ‐ A breach of the Contract clauses in 29 CFR 5.5 may be grounds for termination of the Contract, and for debarment as a Contractor and a subcontractor as provided in

29 CFR 5.12.

(8) Compliance with Davis‐Bacon and Related Act Requirements ‐ All rulings and interpretations of the

Davis‐Bacon and Related Acts contained in 29 CFR parts 1, 3, and 5 are herein incorporated by reference in this Contract.

(9) Disputes Concerning Labor Standards ‐ Disputes arising out of the labor standards provisions of this Contract shall not be subject to the general disputes clause of this Contract. Such disputes shall be resolved in accordance with the procedures of the Department of Labor set forth in 29 CFR parts 5, 6, and 7. Disputes within the meaning of this clause include disputes between the Contractor (or any of its subcontractors) and the contracting agency, the U.S. Department of Labor, or the employees or their representatives.

(10) Certification of Eligibility

(a) By entering into this Contract, the Contractor certifies that neither it (nor he or she) nor any person or firm who has an interest in the Contractor's firm is a person or firm ineligible to be awarded Government contracts by virtue of section 3(a) of the Davis‐Bacon Act or 29 CFR 5.12(a)(1).

(b) No part of this Contract shall be subcontracted to any person or firm ineligible for award of a Government contract by virtue of section 3(a) of the Davis‐Bacon Act or 29 CFR 5.12(a)(1).

(c) The penalty for making false statements is prescribed in the U.S. Criminal Code, 18 U.S.C. 1001.

OVERTIME REQUIREMENTS AND SAFETY

STANDARDS

(1) Overtime Requirements ‐ No Contractor or subcontractor contracting for any part of the Contract work which may require or involve the employment of laborers or mechanics shall require or permit any such laborer or mechanic in any workweek in which he or she is employed on such work to work in excess of forty hours in such workweek unless such laborer or mechanic receives compensation at a rate not less than one and one‐ half times the basic rate of pay for all hours worked in excess of forty hours in such workweek or in excess of eight hours in a work day as prescribed by 29 CFR Section 5.15.

(2) Violation; Liability for Unpaid Wages;

Liquidated Damages ‐ In the event of any violation of the clause set forth in paragraph (1) of this section the Contractor and any subcontractor responsible therefor shall be liable for the unpaid wages. In addition, such Contractor and subcontractor shall be liable to the United States for liquidated damages.

Such liquidated damages shall be computed with respect to each individual laborer or mechanic, including watchmen and guards, employed in violation of the clause set forth in paragraph (1) of this section, in the sum of $10 for each calendar day on which such individual was required or permitted to work in excess of the standard workweek of forty hours without payment of the overtime wages required by the clause set forth in paragraph (1) of this section.

(3) Withholding for Unpaid Wages and Liquidated Damages ‐ The Authority shall upon its own action or upon written request of an authorized representative of the Department of Labor withhold or cause to be withheld, from any moneys payable on account of work performed by the Contractor or subcontractor under any such contract or any other Federal contract with the same prime Contractor, or any other federally‐assisted contract subject to the Contract Work Hours and Safety Standards Act, which is held by the same prime Contractor, such sums as may be determined to be necessary to satisfy any liabilities of such Contractor or subcontractor for unpaid wages and liquidated damages as provided in the clause set forth in paragraph (2) of this section

(4) Safety Standards ‐ In accordance with section 107 of the Contract Work Hours and Safety Standards Act, as amended, 40 U. S. C. 3701, et.seq., the Contractor shall assure that no laborer or mechanic working on a construction contract shall be required to work in surroundings or under working conditions that are unsanitary, hazardous, or dangerous to his or her health and safety, as determined in accordance with US. DOL regulations, "Safety and Health Regulations for Construction, "29 C. F. R. Part 1926.”

(5) Subcontracts ‐ The Contractor or subcontractor shall insert in any subcontracts the clauses set forth in these Labor Standards and also a clause requiring the subcontractors to include these clauses in any lower tier subcontracts. The prime Contractor shall be responsible for compliance by any subcontractor or lower tier subcontractor with the clauses set forth in paragraphs (1) through (4) of this section.

D E P A R T M E N T O F C A P I T AL P R O G R A M S , E X P A N S I ON & I N N O V A T I ON | O F F I C E O F I N F R A S T R U C T UR E

CONTRACT FORMS

M

ET

R O

PO

LI

TA

N

A

TL

AN

TA

R

AP

ID

T

R

AN

SI

T

AU

TH

O R

IT

Y

C O

M

PA

N Y

N

AM

E:

A

PP

LI

C

A

TI

O N

F O

R P

R O

G R

ES

S

P A

YM

EN

T C

O N

TR

AC

T N

AM

E:

AP

PL

IC

AT

IO

N N o.

AD

D R

ES

S:

C O

N

TR

AC

T

PR

O

PO

SA

L N

U M

BE

R

D

AT

E

SU

BM

IT

TE

D

FO

R

P

ER

IO

D

E N

D

IN

G

C O

N

TR

AC

T

EA

R

N

ED

IT

EM

D

ES

C R

IP

TI

O N

TH

IS

M O

N

TH

TO

TA

L

TO

D

AT

E Q

U

AN

TI

TY

U N

IT

U

N

IT

P R

IC

E

Q U

AN

TI

TY

AM

O U

N T

Q U

AN

TI

TY

AM

O U

N T

/2

3/

/2

3/

Pa ge o f 2

M

ET

R O

PO

LI

TA

N

A

TL

AN

TA

R

AP

ID

T

R

AN

SI

T

AU

TH

O R

IT

Y

C O

M

PA

N Y

N

AM

E:

A

PP

LI

C

A

TI

O N

F O

R P

R O

G R

ES

S

P A

YM

EN

T C

O N

TR

AC

T N

AM

E:

AP

PL

IC

AT

IO

N N o.

AD

D R

ES

S:

C O

N

TR

AC

T

PR

O

PO

SA

L N

U M

BE

R

D

AT

E

SU

BM

IT

TE

D

FO

R

P

ER

IO

D

E N

D

IN

G

C O

N

TR

AC

T

EA

R

N

ED

IT

EM

D

ES

C R

IP

TI

O N

TH

IS

M O

N

TH

TO

TA

L

TO

D

AT

E Q

U

AN

TI

TY

U N

IT

U

N

IT

P R

IC

E

Q U

AN

TI

TY

AM

O U

N T

Q U

AN

TI

TY

AM

O U

N T

St or ed M at er ia ls

TO

TA

L B

AS

E

C O

N

TR

AC

T

IT

EM

S

TO

TA

L C

H

AN

G E

O R

D

ER

IT

EM

S

TO

TA

L C

O N

TR

AC

T

(C on tr ac to r)

I ce rti fy th at al ls ub co nt ra ct or s an d su pp lie rs w ho w he th er di re ct ly to th e C on tra ct or or th ro ug h in te rm ed ia te su bc on tra ct or s, pe rfo rm ed w or k or su pp lie d m at er ia ls or eq ui pm en t, pa ym en tf or w hi ch w as in cl ud ed in th e pr ev io us

Pr og re ss

Pa ym en tr ec ei ve d, ha ve be en pa id al la m ou nt s du e fo r al lt he w or k, m at er ia ls ,a nd eq ui pm en tf or w hi ch th e

Au th or ity ha s so pa id th is C on tra ct or

/2

3/

/2

3/

Pa ge o f 2

01/2000

AFFIDAVIT OF FINAL PAYMENT AND FINAL RELEASE

I, , being first duly sworn, on oath depose and say as follows:

I am employed by , who is the Contractor under the METROPOLITAN ATLANTA RAPID TRANSIT AUTHORITY’s, (hereinafter referred to as Authority) contract number , contract title as the Project Manager (or other title, if appropriate) on the said Contract, and am authorized to make these statements on behalf of the said General Contractor.

I hereby certify that the agreed price, or in the absence of an agreed price, the reasonable value, of all work done under the said Contract, all materials furnished therefor, and all services furnished or performed in connection therewith, have been invoiced as stated herein, and that there are no outstanding amounts due, or claims for amounts due, or claims of liens for any such work, materials, or services not included in the invoiced amount as stated herein.

I further certify that all subcontractors and suppliers who, whether directly to the Contractor or through intermediate subcontractors, performed work or supplied materials or equipment, payment for which was included in any prior payment, have been paid all amounts due for all work, materials, and equipment for which the Authority has so paid this Contractor.

The Contractor, upon receipt of the invoiced sum of $ , to be paid by the Authority, accepts the said invoiced sum as the full balance owed to it under this Contract, thereby bringing the total dollar value of the Contract to $ , and acknowledges that all amounts under this Contract have been invoiced as stated herein in full; upon final payment of the invoiced sum contained herein, Contractor hereby releases the Authority, its successors, and assigns, from any and all claims of any nature whatsoever for work performed, or labor or materials supplied, in connection with this Contract.

This Affidavit is made pursuant to Section 44-14-361.2 of the Georgia Code.

In witness whereof, the said Contractor has caused this Affidavit to be executed on its behalf and its seal to be affixed hereto, by a person duly authorized thereunto.

(CONTRACTOR)

By:

Title:

COUNTY OF

STATE OF GEORGIA

Subscribed and sworn to before me this _____ day of ___________ , 20 .

(SEAL)

Notary Public

D E P A R T M E N T O F C A P I T AL P R O G R AM S , E X P A N S I ON & I N N O V A T I ON | O F F I C E O F I N F R A S T R U C T UR E

SPECIFICATIONS

B50330 – 011100 - 1

SECTION 011100 - SUMMARY OF WORK

PART 1 - GENERAL

1.01 THE WORK

A. The Work generally consists of demolition of the two (2) existing buildings, on-site utilities, pavement, and other site features.

B. Unless otherwise noted, only above-ground utilities will be removed. Underground utilities will remain in place.

C. The Contractor will construct perimeter fence and provide erosion control during the demolition. All disturbed areas will be stabilized.

D. The project is located on 5163 and 5265 Old Dixie Hwy in Forest Park, Georgia.

E. The Work shall be constructed under a single contract.

1.02 CONTRACTOR'S DUTIES

A. Start, survey, lay out, construct, and complete the Project in accordance with the Contract Documents.

B. Supervise, superintend, direct, and manage the construction of the Project.

C. Establish means of, and techniques and procedures for, constructing and otherwise executing the Project.

D. Except as otherwise specified, furnish the following and pay the cost thereof:

1. Labor, superintendence, and products.

2. Construction supplies, equipment, tools, and machinery.

3. Water, heat, and other utilities required for construction.

4. Other facilities and services necessary to properly execute and complete the Work.

E. Pay costs of legally required sales, consumer, and use taxes, and Governmental fees.

F. Obtain all permits required for the Work and pay all related charges and fees. Coordinate with Authority, as necessary, to facilitate the permits. Obtain permits for the following:

1. Erosion and Sedimentation Control

2. Demolition Permit

3. Street Traffic Control and Closures

4. Haul Routes

5. Noise permits

G. Perform Work in accordance with codes, ordinances, rules, regulations, orders, and other legal requirements of governmental bodies and public agencies, including the Authority, bearing on performance of the Work.

H. Do not alter nor deviate from Drawings and Specifications. Necessary changes will be made by appropriate modifications to Drawings and Specifications.

I. Forward submittals and communications to the Authority via Authority’s authorized representative, the Resident Engineer.

B50330 – 011100 - 2

J. Maintain order, safe practices, and proper conduct at all times among Contractor's employees.

The Authority, and its authorized representative, may require that disciplinary action be taken against an employee for disorderly, improper, or unsafe conduct. Should an employee of the Contractor be dismissed from his duties for misconduct, incompetence, or unsafe practices, or combinations thereof, do not rehire that employee for the duration of the Project.

K. Coordinate prosecution of the Work with those public utilities, governmental bodies, private utilities, and other contractors performing Work on, and adjacent to, the Job Site; either eliminate, or minimize as far as possible, delays in the Work and conflicts with those utilities, bodies, and contractors.

1. Coordinate utility activities with the Authority's Utility Coordinator; coordination with other contractors shall be through the Authority's Resident Engineer.

2. Schedule governmental, private utility, and public utility work, relying on survey points, lines, and grades established by the Contractor to occur immediately after those points, lines and grades are established.

3. Confirm coordination measures for each individual case with the Authority by letter.

L. Coordinate activities of the several trades, suppliers, and Subcontractors, if any, performing the Work.

M. Execute the Work as specified and in a timely manner. Plan, organize, and staff each shift to have sufficient, compatible complement of personnel, materials, equipment, and tools to maintain and sustain scheduled work program, and to complete the Project and portions thereof, as specified in GENERAL CONDITIONS Article 28A.

1. Use multiple shifts, multiple crews, or extended hours, or combinations thereof.

2. Normally confine construction operations to hours between dawn and dusk unless working at other times has been approved by the Authority. Contractor may be allowed to work daytime, evenings, weekends, and holidays when approved by the Authority as long as there is no disruption to MARTA's normal operations.

3. When required, the Contractor shall present a written program outlining precautions to be taken to control extraordinary hazards presented by night, weekend, or holiday Work. The Program shall include, but not be limited to, supplementary lighting of Work areas, availability of medical facilities, and security precautions. Contractor shall coordinate the schedule of the Work with the Authority, in order to limit any disruptions to facility operation.

N. Delay Work involving municipality's water system until Subcontractor actually performing Work has been approved by the municipality.

O. Make necessary preparations to complete the Work in conformity with Contract Documents.

1.03 WORK BY OTHERS

A. The following Work will be performed, at no expense to Contractor:

1. Municipality will disconnect its lines and services from those to be abandoned and to be removed from service and will cap its mains before Contractor removes those lines.

2. Atlanta Gas Light (AGL) or Gas South will disconnect its lines and services from those to be abandoned and to be removed from service and will cap its mains before Contractor removes those lines, at no expense to Contractor.

3. AT&T or other franchise communication utility will disconnect and remove its lines and services from those to be abandoned and to be removed from service. AT&T or other franchise communication utility will relocate its lines, construct its duct banks, and connect its services to buildings.

4. Georgia Power Company (GPC) will disconnect and remove its lines and services from those to be abandoned and to be removed from service.

B50330 – 011100 - 3

1.04 FUTURE WORK

A. Entire area of the Project is planned for future development under a separate contract after the Demolition Project is completed.

1.05 ORDER OF WORK

A. Construct Work in stages as follows:

1. Construct perimeter fence.

2. Demolish all above foundation parts of the existing buildings.

3. Haul steel elements of the existing structures suitable for recycling to recycling facility.

All recycled material is to be recorded and receipts provided to the Authority.

4. Install all Phase I erosion control devices prior to or concurrent with the demolition.

5. Demolish all foundations, pavement, curb and gutter, and other site elements per

Contract Drawings.

6. Haul concrete that has been cleaned of reinforcing and broken into pieces to the recycling facility. All recycled material is to be recorded and receipts provided to the Authority.

7. Install all Phase II erosion control devices prior to or concurrent with the demolition.

8. Stabilize all disturbed area(s).

1.06 CONTRACTOR USE OF JOB SITE

A. Confine Job Site operations to areas permitted by law, ordinances, permits, and the Contract Documents.

B. Consider the safety of the Work, and that of people and property on and adjacent to Job Site, when determining amount, location, movement, and use of materials and equipment on Job Site.

C. Do not load Work with equipment and products that would endanger structural integrity of the Work.

D. Protect products stored on Job Site.

E. Move stored products that interfere with foreseeable operations of the Authority, governmental bodies, public and private utilities, and other contractors at no additional expense to the Authority.

F. Secure additional storage and Work areas needed for operations at no additional expense to the Authority.

G. Protect the general public, and residents within limits of construction, from construction-related activities; do not unduly inconvenience public by construction activities. Conduct Work in and on streets and highways ensuring that pedestrian and vehicular traffic will be unobstructed or obstructed to the least possible degree. Nothing in this Article shall lessen Contractor's obligations stipulated in Articles 25 and 45 of the GENERAL CONDITIONS.

H. Upon acceptance of the Work described herein and in GENERAL CONDITIONS Article 28A the Authority does not intend to have other contractors working on or adjacent to the construction Job Site during the demolition. The Authority intends to start full site development under a separate contract after the Demolition Contract is completed.

I. All Work under this…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .