B08-Solicitation_W912PF26QA010_PWS.pdf

JAN 26

Performance Work Statement (Includes associated Performance Requirements Summary (PRS)

PERFORMANCE WORK STATEMENT (PWS)

173rd MBCT (A) Dynamic Targetry AL26 24 April – 08 May 2026

Part 1

General Information

1. General: This is a non-personal service contract under which the personnel rendering the service are not subject, either by the contract’s terms or by the manner of its administration, to the supervision and control usually prevailing in relationships between the Government and its employees.

1.1 Description of Services/ Introduction: This is a non-personal service contract to provide dynamic robotic targetry to supplement a U.S. Army Command Field Exercise (CFX) in Tan Tan Training Area near Agadir, Morocco from 24 April 2026 to 08 May 2026. The Contractor shall provide, transport, install, operate, maintain, repair, and disassemble all targetry throughout the period of performance. The Contractor shall supplement CFX scenarios, training aids, devices, and simulators (TADS) provided by the 173rd MBCT (A) and U.S. Army Training Support Activity Europe (TSAE). The Contractor shall provide dedicated Field Service Representatives (FSRs) to work closely with the CFX primary instructors and support unit training objectives. The Contractor shall provide dynamic robotic targetry services on two (2) separate live fire ranges sequentially, with 2 vehicle targets and 8 infantry targets.

1.2 Background: Due to limitations in conventional moving target systems currently available, the United States is actively exploring solutions for mobile robotic targetry. Presently, the only viable option involves lateral movement on a rail system that requires excavation and installation. However, due to shortages in the inventory of conventional moving targets and rail systems, alternative approaches are being sought.

1.3 Scope: The contractor shall provide all personnel, equipment, supplies, transportation, tools, materials, supervision, and maintainance to perform services as described in the PWS and associated contract documents. Contractor shall perform to the standards and acceptable quality levels identified in this PWS and associated contract documents.

1.4 Objectives: The objective of this contract is to improve the realism and difficulty of live fire training scenarios by supplementing current TADS with:

- Remote control/ execution of pre-programmed routes of Robotic Targets (long duration multi-target operation, day & night, beyond the visual range)

- Realistic three-dimensional targets that can be shot from any direction (capable of autonomously exposing limited target around cover / concealment).

- Reactive to hits: instant target visual feedback (stopping movement, dropping flat) Configurable to tolerate multiple hits, reduce speed, flinch, and produce sound effects. Adjacent targets programmable to react in a coordinated fashion

- Rated to receive impacts of up to 7.62mm ammunition fired from a fully-automatic machine gun.

- Vehicle targets capable of receiving blasts from up to a 0.5 block C4 bare charge.

- Geo-fence capable to ensure Surface Danger Zone can be consistently managed within range constraints

- Targetry killswitch and FSR operator to control multiple target sets in accordance with the Scheme of Maneuver

1.5 General Information:

1.5.1 Quality Control Plan (QCP): Reserved.

1.5.2 Quality Assurance: Government contract quality assurance shall be performed continuously throughout the period of performance to determine that the services conform to contract requirements.

1.5.3 Recognized Holidays: The following provides information on recognized holidays for the purpose of the PWS. If submittal of any documentation (e.g. deliverables, submittals, etc.) deadlines fall on a holiday, the closest work day prior to the holiday will apply as the deadline for submittal.

1.5.3.1 U.S. Holidays: Work shall be performed on weekends and U.S. federally recognized holidays occurring during the normal workweek unless otherwise directed by the Contracting Officer.

1.5.3.2 Host Nation Holidays: Work shall be performed on weekends and local Host Nation holidays occurring during the normal workweek unless otherwise directed by the Contracting Officer.

1.5.4 Operating Hours: The planned training hours each day during the period of performance are from 0800 – 0200;

however, the Contractor shall be prepared to provide 24-hour support if required to accomplish unit training objectives.

1.5.4.1 Government Facility Office Hours: Reserved.

1.5.4.2 Government Facility Operating Hours: Reserved.

1.5.4.3 Contractor Support Hours: The planned training hours each day during the period of performance are from 0800 – 0200; however, the Contractor shall be prepared to provide 24-hour support if required to accomplish unit training objectives.

The Contractor shall maintain an adequate workforce at all times, for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce is essential.

1.5.4.3.1 Contractor Work Plan: Reserved.

1.5.5 Training Holidays: Reserved.

1.5.6 Place of Performance: The work to be performed under this contract will be performed at Tan Tan Training Area near Agadir, Morocco.

1.6 Security Requirements: The following information is provided on security related matters.

1.6.1 Security Program: Reserved.

1.6.2 Personnel Security Clearance Requirements: Reserved.

1.6.3 Installation Access: Access to U.S. installations and controlled areas is limited to personnel who meet security criteria and are authorized by Host Nation law to work in that country. Failure to submit required information/data and obtain required documentation or clearances in accordance with Army in Europe (AE) Regulation 190-16 (AE Reg 190-16) Installation Access Control or (AE) Regulation 604-1, will be grounds for denying access to U.S. or host nation installations and controlled areas. The Contractor shall ensure that any subcontractors used in performance of this contract complies with these requirements and that all employees, of both the Contractor and any subcontractor utilized by the Contractor, are made aware of and comply with these requirements. Should anything in this paragraph conflict with AE Reg 190-16 or (AE) Regulation 604-1, the regulation takes precedent.

The Contractor shall be aware of and comply with the requirements associated with Installation Access Control. The Government is not liable for any costs associated with performance delays due solely to a firm’s failure to comply with Installation Access Control System (IACS) or host nation processing requirements.

The Contractor shall return installation passes to the issuing IACS or host nation office when the contract is completed or when a Contractor employee no longer requires access.

1.6.3.1 Installation Pass Log: In addition, the Contractor shall provide the Contracting Officer, via the COR, an Initial Installation Pass Log (AEF 190-16F) within five (5) calendar days after contract award. The log must at a minimum contain the following information in the AEF 190-16F. The log shall be updated as employees are added or removed. The Updated Installation Pass Log shall be current and available at any time upon request by the Government and submitted to the COR within five (5) days after any changes to the log.

1.6.3.2 Individual Termination or Expiration of Employment: The Contractor shall collect the installation access passes the same day employment of an individual has expired or has been terminated and shall return them to the issuing office within one (1) day.

1.6.3.3 Contract Termination or Cancellation: Upon termination or cancellation of this contract, the Contractor shall collect all outstanding installation access passes and return them to the issuing office within one (1) day.

1.6.3.4 Common Access Cards (CAC) and CAC Log: Reserved.

1.6.4 Background Checks:

1.6.4.1 U.S. Citizen: The Requiring Activity Manager will determine the extent of background checks required. The Contractor employee may begin performance of the contract after receiving a favorable local background check. The Contractor agrees to replace the employee should results of the stateside background check, if required, be unfavorable as determined by the Requiring Activity Manager. The Contractor’s replacement of the employee with the unfavorable background check shall be within a timeframe provided by the Requiring Activity Manager. The Contractor shall also replace employees whose background check, during their tenure of employment, renders them with an unfavorable local or stateside background check, as determined by the Requiring Activity Manager.

1.6.4.2 Local Nationals and Third Country Nationals: As a minimum prior to beginning performance, Contractors employing local national and third country nationals shall furnish the Contracting Officer via the COR and the Requiring Activity Manager a valid and current government issued ID.

1.6.5 Physical Security: The Contractor shall safeguard all Government equipment, information, and property provided for Contractor use.

1.6.6 Operations Security (OPSEC) Requirements: Contractor personnel shall adhere to facility security policies and restrictions. The Contractor shall immediately report suspicious activities to security personnel. Government issued access badges shall not be worn outside designated facilities where visible to the general public.

1.7 Key Control: Reserved.

1.8 Post Award Conference/ Periodic Progress Meetings: The Contractor shall attend any post award conference convened by the contracting activity or contract administration office in accordance with FAR Subpart 42.5. The Contracting Officer, COR, and other Government personnel, as appropriate, may meet periodically with the Contractor to review the Contractor's performance. At these meetings the Contracting Officer will apprise the Contractor of how the Government views the Contractor's performance and the Contractor shall apprise the Government of problems, if any, being experienced.

Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the Government.

1.8.1 The Contractor shall attend, participate in, and furnish input to scheduled and unscheduled meetings, conferences, and briefings that relate to the functions and services herein as required by the Government to provide effective communication and impart necessary information. The Contract Manager or designated representative shall attend meetings as requested by the Government. Meeting attendees shall at times include Contractor managerial, supervisory, and other personnel knowledgeable of the subject matter. Meetings may start or end outside of regular duty hours.

1.9 Contracting Officer’s Representative (COR): Refer to Part 2 of this PWS for the definition of a COR. As determined by the Contracting Officer, a COR will be appointed and identified by letter of designation, a copy of which will be provided to the Contractor by the Contracting Officer. The designation letter states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates, or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting order. The COR monitors all technical aspects of the contract and assists in contract administration. The COR is not authorized to obligate the Government. If the work is not written in the contract, the COR is not authorized to request new work. The COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract, perform inspections necessary in connection with contract performance, maintain written and oral communications with the Contractor concerning technical aspects of the contract, issue written interpretations of technical requirements, including Government drawings, designs, specifications, monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies, coordinate availability of Government property, and coordinate site entry of Contractor personnel.

1.10 Key Personnel: Reserved.

1.11 Identification of Contractor Employees: All Contractor personnel attending meetings, answering Government telephones, and working in other situations where their Contractor status is not obvious to third parties must identify themselves, to include proper marking of signature blocks in correspondence, to avoid creating an impression in the minds of members of the public that they are Government officials. The Contractor shall ensure that all documents or reports, produced by Contractors are suitably marked as Contractor products or that Contractor participation is appropriately disclosed.

1.12.1 Reserved.

1.12.2 Reserved.

1.13 Contractor Travel: The Contractor shall be required to travel to Tan Tan Training Area near Agadir, Morocco in support of this PWS. The Contractor is responsible for funding all necessary travel. Travel costs will not be reimbursed by the U.S. Government outside of the firm-fixed price contract line items in the awarded contract.

1.14 Other Direct Costs (ODCs): Reserved.

1.15 Data Rights: The Government has unlimited rights to all documents and materials produced under this contract. All documents and materials, to include the source codes of software, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership and copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the Contractor without written permission from the Contracting Officer. All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

1.16 Non-Disclosure Requirements: Reserved.

1.17 Protection of Government and Contract Information: Per Public Use Notice of Limitations stated by Defense imagery Management operations Center and contained at www.dimoc.mil/resources/limitations/ , the Contractor shall not cite any information (e.g., contract information, pictures, locations, etc.) obtained through this contract on any hard copy or digital marketing tools to include its company website.

1.18 Non-Disclosure Statements: Reserved.

1.19 Organizational Conflict of Interest (OCI): Reserved.

1.20 Phase In /Phase Out Period: Reserved.

1.21 Safety: The following provides information pertaining to Safety and Accident Prevention:

1.21.1 Safety Laws and Regulations: The Contractor shall comply with FAR 52.236-13, Accident Prevention (November 1991), the references contained therein (e.g. U.S. Army Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1)), AR 385-63 – Range Safety, DA-PAM 385-63 – Range Safety, all 7ATC Range Standard Operating Procedures SOP), and applicable Host Nation Safety Laws and Regulations.

1.21.1.1 In addition to other requirements for accident prevention specified in this contract, the Contractor shall comply with all Federal and State requirements governing safety and health protection on construction sites and other applicable occupational safety codes. The Contractor shall indicate its plan for compliance considering conditions of the work described by the design, technical proposal, operational activities of the Government or others in the area of the work, identification of the coordinator, and implementation of all other accident prevention provisions of this contract.

1.21.1.2 The Contractor shall complete and provide safety notifications required by host nation authorities and Moroccan Range Control and will provide documented proof to the Contracting Officer via the COR, no later than three (3) days that such notifications were made.

1.22 Environmental Compliance: The following provides information on Environmental Compliance.

1.22.1 Environmental Compliance Plan and Program: The Contractor shall ensure that all of its operations and activities conform to the Moroccan environmental policy requirements. The Contractor shall ensure that all contract personnel have received appropriate levels of training in the handling, use, storage, and disposal of hazardous material. In addition, the Contractor shall ensure that all Contractor controlled activities on Moroccan installations are conducted in accordance with applicable Moroccan environmental laws/standards.

If any Contractor equipment requires the use of hazardous materials/substances, the Contractor shall, prior to mobilization, inform the Contracting Officer (KO)/Contracting Officer Representative (COR) of the types and amount of hazardous materials needed to be brought onto the installation in order to fulfill their contractual requirements. Contractor shall also provide the Safety Data Sheets, storage requirements and proposed storage locations for the hazardous material. The KO/COR shall provide a copy of this information to the Installation Fire Department and the Environmental Division. Prior to contract completion, the Contractor shall remove all hazardous materials and dispose of all hazardous waste (HW) generated in accordance with applicable Moroccan environmental laws/standards. A copy of the HW disposal documents must be forwarded to the HW program manager at the applicable Moroccan authority. The Contractor shall clean up at its own expense any contamination, including soil and ground water contamination caused by hazardous materials/substances brought onto the installation, or by his activities. The Contractor must immediately report any hazardous substance spills to the installation range safery officer.

1.23 Required Training: Reserved.

1.23.1 Anti-Terrorism (AT) Level I Training: Reserved.

1.23.2 OPSEC Training: Reserved.

1.23.3 iWATCH Training: Reserved.

1.23.4 Information Assurance (IA) Training: Reserved.

1.23.5 Personally Identifiable Information (PII): Reserved.

1.23.6 Threat Awareness Reporting Program: The Contractor shall ensure that all personnel, including subcontractors, fully participate in the Army’s threat awareness reporting program. This includes attending required training sessions and promptly reporting any suspicious activity to the Contracting Officer Representative (COR).

1.24 Authorization to Perform Services in Morocco

1.24.1 Contractors performing services in Morocco shall comply with Moroccan law. The Contractor shall determine whether performance requires registration with Moroccan authorities or authorization to do business in Morocco and, if so, shall comply with all requirements. Whether or not registration or authorization to do business is required, the Contractor shall determine what documents or authorization its employees and any subcontractor employees must possess to work in Morocco. The Contractor shall ensure affirmatively that its employees and subcontractor employees possess such documents or authorizations.

1.24.2 Contractor employees who are not nationals of Morocco shall possess work and residence permits.

1.24.3 By acceptance of and performance under this contract, the Contractor affirms that it has complied with the requirements above. Compliance with this requirement and Moroccan law is a material contract requirement. Noncompliance by the Contractor or subcontractor at any tier shall be grounds for issuing a negative past performance evaluation and terminating this contract for default.

1.25 Notice to Proceed: the notice to proceed will be provided as indicated below.

☒The effective date of contract will constitute the date of notice to proceed ☐A notice to proceed letter will be issued ☐The date of the letter transmitting the contract will constitute the date of the notice to proceed

1.26 Electromagnetic Compatibility Directive: The Contractor certifies that all electrical and electronic equipment and appliances furnished are in compliance with Moroccan law. Any penalties for noncompliance imposed by the Government of Morocco where the equipment or appliances are delivered or product liability claims caused by interference generated by furnished appliances or equipment are solely the responsibility of the Contractor.

1.27 Government Property and Services: Reserved.

1.28 Verification Inspection: Contractor-owned or controlled structures and containers located on U.S. Government installations are subject to short-notice inspections by inspection teams. The Government will endeavor to provide the Contractor as much notice as possible in the event of such inspections. The contractor shall provide access to such structures and containers at the request of the Government. The Contractor shall report such inspections to the KO through the COR in writing within ten (10) calendar days of completion of the inspection. Contractor-owned or controlled structures and/or containers on U.S. or host nation installations may have to be inspected even if Contractor personnel are unavailable to provide access. Any costs borne by the Contractor or any impact on contract performance as a result of the inspection will be a matter of negotiation between the Contractor and the KO.

PART 2

DEFINITIONS & ACRONYMS

2. Definitions and Acronyms

2.1 Definitions: Although not inclusive of every term used within this PWS, the following provides a list of definitions used throughout this PWS and commonly used in the acquisition field.

Contracting Officer – means a person with the authority to enter into, administer, and/or terminate contracts and make related determinations and findings on behalf of the Government. Note: The only individual who can legally bind the Government.

Contracting Officer's Representative (COR) – As defined in DFARS 202.101, means an individual designated and authorized in writing by the Contracting Officer to perform specific technical or administrative functions. DoD Instruction (DoDI) 5000.72, Part II Definitions states the following when defining a COR: “Defined in subpart 202.101 of Reference (f).

Any individual delegated responsibilities pursuant to subpart 1.602-2 of Reference (e), regardless of local terminology, must be certified in accordance with this instruction. For example, local terminology can be COR, Contracting Officer’s technical representative, technical point of contact, technical representative, alternate COR, administrative COR, assistant COR, line item manager, task order manager, quality assurance personnel, quality assurance evaluator, or COR management.” In addition, Army Regulation 70-13, Chapter 2, paragraph 2-2g, states, in part, the following when providing other surveillance support personnel to assist the COR when needed, “…These other surveillance support personnel may serve as on-site representatives of the COR in performance of actual contract surveillance if they meet all COR requirements and have been appointed by the Contracting Officer as alternate CORs.”

Contractor – means a supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

Contractor-acquired Property - means property acquired, fabricated, or otherwise provided by the Contractor for performing a contract and to which the Government has title.

Day – means, unless otherwise specified, a calendar day.

Defective Service – means a service output that does not meet the standard of performance associated with the Performance Work Statement.

Deliverable – means anything that can be physically delivered, but may include non-manufactured things such as meeting minutes or reports.

Government-furnished Property – As reflected in FAR 52.245-1, Government-furnished Property “means property in the possession of, or directly acquired by, the Government and subsequently furnished to the Contractor for performance of a contract. Government-furnished property includes, but is not limited to, spares and property furnished for repair, maintenance, overhaul, or modification. Government-furnished property also includes contractor-acquired property if the contractor-acquired property is a deliverable under a cost contract when accepted by the Government for continued use under the contract

Government Property - means all property owned or leased by the Government.Government property includes both Government-furnishedand Contractor-acquired property. Government property includes material, equipment, special tooling, special test equipment, and real property. Government property does not include intellectual property and software.

Property Administrator - means an authorized representative of the Contracting Officer appointed in accordance with agency procedures, responsible for administering the contract requirements and obligations relating to Government property in the possession of a Contractor.

High Level Objective (HLO) – means a key overarching result-based objective for a project necessary to achieve the project’s vision. HLOs are similar to Level 2 in a Work Breakdown Structure. Each HLO may contain several statements to flesh out the areas necessary to meet the objective.

Physical Security – means that part of security concerned with physical measures designed to safeguard personnel; to prevent unauthorized access to equipment, installations, material, and documents; and to safeguard against espionage, sabotage, damage, and theft.

Quality Assurance – (or Government contract quality assurance) means the various functions, including, inspection, performed by the Government to determine whether a Contractor has fulfilled the contract obligations pertaining to quality and quantity.

Quality Assurance Surveillance Plan (QASP) – means the key Government-developed surveillance process document, and is applied to Performance-Based Service Contracting (PBSC). The QASP is used for managing Contractor performance assessment by ensuring that systematic quality assurance methods validate that Contractor quality control efforts are timely, effective, and are delivering the results specified in the contract or task order. The QASP directly corresponds to the performance objectives and standards (i.e., quality, quantity, timeliness) specified in the Performance Work Statement (PWS). It provides specific details on how the Government will survey, observe, test, sample, evaluate, and document Contractor performance results to determine if the Contractor has met the required standards for each objective in the PWS.

The QASP, with very few if any exceptions, is an internal to Government document.

Quality Control – means all necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

Statement – means the specific results-based activities required to satisfy HLOs. A statement contains a result, the context of the statement, and the required action(s). Statements focus on “what” is to be accomplished; however they are not prescriptive in describing “how” the outcome is to be achieved. Each HLO may have several statements to flesh out the areas necessary to meet the objective. Statements are similar to Level 3 in a Work Breakdown Structure.

Subcontractor – means one that enters into a contract with a prime Contractor. The Government does not have privity of contract with the subcontractor.

Work Day - The number of hours per day the Contractor provides services in accordance with the contract.

Work Week - Monday through Friday, unless otherwise specified.

2.2 Acronyms: Although not inclusive of every term used within this PWS, or that may be included in an acquisition, the following provides a list of acronyms commonly used in the acquisition field.

ACOR Alternate Contracting Officer's Representative AE Army in Europe AFARS Army Federal Acquisition Regulation Supplement AHA Activity Hazard Analysis AOR Area of Responsibility AR Army Regulation AT Anti-terrorism ATCTS Army Training Certification Tracking System CAC Common Access Card CFX Combined Arms Live Fire Exercise CCE Contracting Center of Excellence CFE Conventional Forces Europe CFR Code of Federal Regulations CONUS Continental United States (excludes Alaska and Hawaii) COR Contracting Officer’s Representative COTS Commercial-Off-the-Shelf DA Department of the Army

DD250 Department of Defense Form 250 (Receiving Report) DD254 Department of Defense Contract Security Requirement List DFARS Defense Federal Acquisition Regulation Supplement DMDC Defense Manpower Data Center DoD Department of Defense FAR Federal Acquisition Regulation GFP Government Furnished Property HLO High Level Objective HIPAA Health Insurance Portability and Accountability Act of 1996 IA Information Awareness IAC Installation Access Control IACO Installation Access Control Office MBCT (A) Infantry Brigade Combat Team (Airborne) ID Identification IGCE Independent Government Cost Estimate IT Information Technology JTR Joint Travel Regulation JPAS Joint Personnel Adjudication System KO Contracting Officer OCI Organizational Conflict of Interest OCONUS Outside Continental United States (includes Alaska and Hawaii) ODC Other Direct Costs OPSEC Operations Security PA Property Administrator PII Personally Identifiable Information PIPO Phase In/Phase Out POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QAP Quality Assurance Program QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program RA Requiring Activity RCO Regional Contracting Office SIGE Safety and Health Protection Plan TADS Training Aids, Devices, and Simulators TSAE Training Support Activity Europe USAG United States Army Garrison USAREUR United States Army Europe UOM Unit of Measure

PART 3

GOVERNMENT PROPERTY (GP) AND SERVICES

3. Government Property and Services

3.1 Services: The Government shall provide a full team dedicated to support unit training objectives during the CFX. The Contractor will work closely with this team throughout the period of performance.

3.2 Facilities: The Government shall provide the ranges where the services will occur.

3.3 Utilities: The Contractor shall instruct employees in utilities conservation practices. The Contractor shall operate under conditions that preclude the waste of utilities, which include turning off the water faucets or valves, light switches, etc. after using the required amount to accomplish tasks requiring the use of the utilities.

3.4 Equipment: Reserved.

3.5 Special Tooling and Test Equipment: Reserved.

3.6 Materials: Reserved.

3.7 Training: Reserved.

3.8 Common Access Cards (CAC): Reserved.

PART 4

CONTRACTOR FURNISHED ITEMS AND SERVICES

4. Contractor Furnished Property and Services

4.1 General: The Contractor shall furnish install and remove all equipment under this requirement.

4.2 Secret Facility Clearance: Reserved.

4.3 Materials: The Contractor shall provide shall provide all the materials for this requirement.

4.4 Vehicles and Equipment: The Contractor shall provide all vehicles and equipment necessary to support this requirement

4.5 Background Checks: The Contractor shall provide Background Checks in accordance with this PWS and as determined by the Government.

PART 5

SPECIFIC TASKS

5.1 Basic Services: The contractor shall provide all personnel, equipment, supplies, transportation, tools, materials, supervision, and maintainance necessary to provide dynamic robotic targetry services to supplement a U.S. Army CFX near Agadir, Morocco from 24 April 2026 to 08 May 2026. The Contractor shall provide dynamic robotic targetry services on two

(2) separate live fire ranges sequentially, with two (2) mobile vehicle targets and eight (8) mobile infantry targets. The Contractor shall work closely with CFX Primary Instructors to meet unit training objectives and training timelines as specified in Attachment 1.

5.2 Tasks: The Contractor shall perform the following tasks:

5.2.1 Robotic Targetry: The Contractor shall provide two (2) dynamic vehicle robotic targets and eight (8) dynamic infantry robotic targets with necessary operators and associated equipment from 24 April 2026 to 08 May 2026 in accordance with range support scenarios described in Attachment 1. The Contractor shall ensure all ten (10) targets are operational at all times during the period of performance. The Contractor is responsible for all necessary maintenance and repairs resulting from damages within the target specifications and tolerances required in this PWS. The Contractor shall provide all necessary repair parts and replacements to ensure uninterrupted services during the period of performance. The Contractor shall restore the full functionality of all targets within one (1) hour after the completion of each live fire iteration. All dynamic robotic targetry shall meet the minimum specifications and tolerances listed below:

5.2.1.1 Dynamic Robotic Vehicle Targetry

5.2.1.1.1 Target shall be capable of maneuvering through generally flat, dirt and rocky terrain to a maximum distance of 2000 meters from the nearest firer.

5.2.1.1.2 Target shall be wirelessly operated and capable of sustaining direct impacts of 7.62mm caliber ammunition at 400 meters from a fully-automatic machine gun.

5.2.1.1.3 The Target shall be capable of moving at a minimum speed of 3 kilometers per hour.

5.2.1.1.4 The Targets shall have adequate battery life and range to support continuous operations.

5.2.1.1.5 The Targetry shall be capable of providing visual effects. The targets shall provide instant target visual feedback to the firer (for example, stopping movement, dropping flat, reducing speed, flinching, etc.) The targets shall be configurable to provide the visual effects after sustaining single or multiple hits. Adjacent targets shall be programmable to react in synchronization with other targets. Sections highlighted yellow have been added.

5.2.1.1.6 Targetry shall be equipped with a “killswitch” or be responsive to a FSR operator that can “kill” a target remotely to support the exercise scenario.

5.2.1.1.7 The targetry shall be realistic, and three-dimensional, and capable of receiving hits from any direction. Additionally, the targetry shall capable of autonomously exposing limited target around cover / concealment.

5.2.1.1.8 The targetry shall be capable of being “Geo-Fencing” to ensure Surface Danger Zones can be consistently managed within range constraints.

5.2.1.1.9 The targetry shall be capable of operating in rain and winds up to 40 kilometers per hour.

5.2.1.1.10 Operates in all lighting conditions (day and night), indoor lighting, and complete darkness.

5.2.1.1.11 Operates out-of-sight of the operator such as behind natural features or buildings or in GPS-denied environments (urban environments, thick tree canopy, etc.).

5.2.1.1.12 Includes one or more Wi-Fi communication range extension kits, command, and control laptops.

5.2.1.2 Dynamic Robotic Infantry Targetry

5.2.1.2.1 Infantry robots contain a 3D target mannequin (4'1" to 5'9" tall) that is affixed to a four-wheel, all-terrain base station that is heavily armor-plated.

5.2.1.2.2 Is trackless and fully autonomous while utilizing GPS and a scanning laser range finder for navigation so the robots can drive themselves without an operator for up to 6 hours with a range of up to 20 miles and walking/running speeds up to 11 mph.

5.2.1.2.3 Operates in all lighting conditions (day and night), indoor lighting, and complete darkness.

5.2.1.2.4 Ability to navigate around unexpected static obstacles taller than 2 feet and can avoid collisions with one another even when given deliberately intersecting paths in an open area.

5.2.1.2.5 Target shall be capable of maneuvering through generally flat, dirt and rocky terrain to a maximum distance of 2000 meters from the nearest firer.

5.2.1.2.6 Target shall be wirelessly operated and capable of sustaining direct impacts of 7.62mm caliber ammunition at 400 meters from a fully-automatic machine gun.

5.2.1.2.7 The Target shall be capable of moving at a minimum speed of 3 kilometers per hour.

5.2.1.2.8 The Targets shall have adequate battery life and range to support continuous operations.

5.2.1.2.9 The Targetry shall be capable of providing visual effects. The targets shall provide instant target visual feedback to the firer (for example, stopping movement, dropping flat, reducing speed, flinching, etc.) The targets shall be configurable to provide the visual effects after sustaining single or multiple hits. Adjacent targets shall be programmable to react in synchronization with other targets. Sections highlighted yellow have been added.

5.2.1.2.10 Targetry shall be equipped with a “killswitch” or be responsive to a FSR operator that can “kill” a target remotely to support the exercise scenario.

5.2.1.2.11 The targetry shall be realistic, and three-dimensional, and capable of receiving hits from any direction.

Additionally, the targetry shall capable of autonomously exposing limited target around cover / concealment.

5.2.1.2.12 The targetry shall be capable of being “Geo-Fencing” to ensure Surface Danger Zones can be consistently managed within range constraints.

5.2.1.2.13 The targetry shall be capable of operating in rain and winds up to 40 kilometers per hour.

5.2.1.2.14 Operates out-of-sight of the operator such as behind natural features or buildings or in GPS-denied environments (urban environments, thick tree canopy, etc.).

5.2.1.2.15 Simulates how an enemy fighter, or a combination of fighters, or a combination of fighers and vechicles might move or react during a live-fire situation, including specification of speeds or random speeds within a defined area.

5.2.1.2.16 Infantry targets acts as standing targets, pop-up targets, or moving targets.

5.2.1.2.17 Infantry targets performs tasks such as patrolling in formation, scattering to cover, chasing other fleeing targets, attacking a position using bounding techniques, or be programmed to act as a single robotic opposing force.

5.2.1.2.18 Includes one or more Wi-Fi communication range extension kits, command, and control laptops.

5.2.2 Field Service Representatives (FSR): Contractor shall provide trained and proficient operators necessary to support 24-hour operations throughout the period of performance. All FSRs shall be proficient in operating the targetry in degraded and limited visibility conditions. The FSRs shall participate in all range preparation activities, including but not limited to: planning discussions, rehearsals, Tactical Exercises Without Troops, Range Walks, Dry Fire Iterations, Blank Fire Iterations, Live Fire Iterations, Range Set-Up, Range Re-Fit, Range Tear Down, After Action Reviews, etc. The Contractor is responsible for all costs associated with lodging, meals, transportation, and incidentals. The Contractor is responsible for making all travel reservations and coordinations. FSRs shall provide their own Personal Protective Equipment (PPE), to include ear plugs and safety glasses.

5.2.3 Shipping, Installation, Tear-Down, and Planning Integration:

5.2.3.1 Equipment Logistics: The Contractor shall be solely responsible for the end-to-end logistical management of all required equipment. This includes the packing, loading, shipping, installation, and subsequent tear-down for return from the Tan Tan Training Area, Morocco. The Contractor is responsible for all costs and administrative tasks associated with transporting the equipment to the designated training range.

5.2.3.2 Customs Clearance: The Contractor shall ensure timely customs clearance for all equipment, particularly for any novel robotics intended for military training. All customs activities will be coordinated through the US Embassy Rabat Defense Attache Office, which will manage the clearance process with the Government of Morocco.

5.2.3.3 Planning and Communication: Throughout the period of performance, the Contractor shall integrate with U.S.

Government personnel for the CFX scenario planning. The Contractor shall be required to attend planning meetings, provide regular updates on shipment status, and advise the U.S. Government on the capabilities and limitations of the provided targetry. The Contractor shall be available for planning sessions that may occur outside of standard business hours.

5.3 Service Contract Reporting Reserved.

PART 6

APPLICABLE PUBLICATIONS

6. Applicable Publications (Current Editions): The following publications, manuals, regulations, etc. are mentioned in this PWS and are listed below.

6.1.1 Department Of Defense Contract Security Classification Specification (DD Form 254)

6.1.2 Department of Defense Security Agreement (DD Form 441)

6.1.3 National Industrial Security Program Operating Manual (DoD 5220.22-M)

6.1.4 Installation Access Control (AE Reg 190-16)

6.1.5 The Army Physical Security Program (AR 190-13)

6.1.6 Contractor Identification (AE Reg 27-715)

6.1.7 U.S. Army Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1)

6.1.8 Information Assurance Workforce Improvement Program (DoD 8570-M)

6.1.9 Information Assurance Training Certification and Workforce Management Directive (DoDD 8570.01)

6.1.10 Information Assurance (AR 25-2)

6.1.11 Electromagnetic Compatibility Directive (2004/108/EC)

6.1.12 Policies and Procedures for Property Accountability (AR 735-5)

PART 7

ATTACHMENT LISTING

7. Attachment List

7.1 Attachment 1 –CFX Scenario Brief