B08.02 Attachment - Appendix A - RhinoArmor 11-90 XC TDS.pdf

RhinoArmor™ 11-90 XC Data Sheet

Part #60101 RhinoArmor™ 11-90 XC Part #60102 RhinoArmor™ 11-90 XC

DESCRIPTION

RhinoArmor™ 11-90 XC is a one to one volume ratio, two-component, 100% solids (no VOCs, no solvents), exothermic, rapid curing, elastomeric hybrid polyurea lining system. The lining thickness varies based on application, typically minimum of 1/16" (62.5 mils; 1.6 mm) up to unlimited thickness. It can be sprayed up to 98% humidity and a dew point temperature difference of 15° or more with no blistering.

RhinoArmor™ 11-90 XC is easy on spray equipment with no fast gelling at the spray gun tip.

TYPICAL USES

• General Purpose Industrial Lining for Applications Such as:

- Material Delivery System Where a Seamless, Flexible System is Essential

- Floor and Wall Protection in Industries Such as Food Processing, Food Storage, Veterinary, Laboratories, and Production Areas

FEATURES AND BENEFITS

• Cold Weather Resistance

• Unique Flexibility at Extremely Low

Temperatures From -58°F (-50° C)

• High Tensile Strength, Elongation and Tear

Strength

• Excellent Performance in Extreme Cold Weather Environments

• Spray-On Application Creates a Monolithic, Seamless Lining Which Conforms to Any Shape and Size

CHEMICAL PROPERTIES* Isocyanate (A) Specific Gravity (grams/cc) 1.08-1.18 Viscosity, cps 600-700 Solids by Volume/Weight 100% Volatile Organic Compounds, calculated 0 lbs/gal Mix Ratio, Parts per Volume 1 Mix Ratio, Parts per Weight 109 Gel Time, seconds 4±2 Tack Free, seconds 6-8 Shelf Life-Unopened Containers 12 months *Properties were tested at 77°F (25°C).

2023-10-04 Page 1 of 3 w w w .R h in o Li n in gs .c o m

Resin (B)TEST

ASTM D-792 .99-1.09

450-550 100%

0 lbs/gal 12 months

• Impact Resistance

• Maximum Thickness-Unlimited

• Low Viscosity

• Solvent-Free

• Easy Processing http://www.rhinolinings.com/

TYPICAL PHYSICAL PROPERTIES TEST RESULT

Hardness (Shore A) ASTM D-2240 90±5 Tensile Strength (psi)** ASTM D-412 2150-2300 Tear Resistance (pli)** Die C ASTM D-624 335-395 Elongation (%) ASTM D-412 275-350†

Equipment Used Process Pressure Spray Gun Mix Module Graco Reactor EXP-2 2300 psi (static) / 1900-2000 psi (dynamic) Fusion-Air Purge AR2929

Process Temperatures: The system settings required to achieve quality lining application will vary depending on environmental and substrate conditions. The following recommended parameters will help ensure optimum lining quality.

Isocyanate Temperature (A) Resin Temperature (B) Hoses - High Pressure Substrate Surface 140-160°F (60-71°C) 140-150°F (60-66°C) 155°F (68°C) 60-110°F (15-43°C)

Impact Resistance (lbs) ASTM D-256 160

• Avoid Application to High Density Polyethylene or Thermo Plastics

SUBSTRATES

Metals, wood, concrete, fiberglass and geotextiles.

DRY FILM THICKNESS RANGE

Varies based on application. Lining thickness can vary from a minimum of 1/16" (62.5 mils), (1.5 mm) for non-load bearing or abrasion-resistant linings up to unlimited thickness.

HOW SUPPLIED

Net weight per set is 910 pounds. A set of RhinoArmor™ 11-90 XC consists of one drum of 'A' Component (475 pounds net weight) and one drum of 'B' Component (435 pounds net weight).

COLOR OPTIONS

Natural, Industrial Tan and Federal Green.

STORAGE

RhinoArmor™ 11-90 XC Resin and/or Isocyanate may be stored for one year from date of manufacture at room temperature (~77°F (25°C)) provided the products are stored in the original sealed container.

CHEMICAL RESISTANCE

Good resistance to many routine chemicals such as: weak acids, weak alkalis, oils and cleaning agents. For specific applications and/or information, consult with a Rhino Linings® representative.

LIMITATIONS

2023-10-04 Page 2 of 3

**Properties were checked on 1/16" (62 mils), (1.6 mm) thick stock.

†Properties were tested at 77°F (25°C) down to -58°F (-50°C)

PROCESSING PARAMETERS

Test samples were sprayed using the following:

Density (lb/ft3) ASTM D-1622 69-70 Mandrel Bend, 180°, 1 inch mandrel ASTM D-522 Pass

SAFETY PRECAUTIONS

Health Considerations: Consult the Rhino Linings® Safety Data Sheet (SDS).

This chemical system requires the use of proper safety equipment and procedures. Please follow the Rhino Linings® product SDS for detailed information and handling guidelines.

For Your Protection: The information and recommendations in this publication are, to the best of our knowledge, reliable.

Suggestions made concerning the products and their uses, applications, storage, and handling are only the opinion of Rhino Linings Corporation. Users should conduct their own tests to determine the suitability of these products for their own particular purposes and of the storage and handling methods herein suggested. The toxicity and risk characteristics of products made by Rhino Linings Corporation will necessarily differ from the toxicity and risk characteristics developed when such products are used with other materials during a manufacturing process. The resulting risk characteristics should be determined and made known to end users and processors.

Because of numerous factors affecting results, Rhino Linings Corporation makes no warranty of any kind, express, or implied, other than the material conforms to its applicable current Standard Specifications. Rhino Linings Corporation hereby disclaims any and all other warranties, including but not limited to those of merchantability or fitness for a particular purpose. No statements made herein may be construed as a representation or warranty. The liability of Rhino Linings Corporation for any claims arising from or sounding in breach of warranty, negligence, strict liability, or otherwise shall be limited to the purchase price of the material.

© 2023 Rhino Linings Corporation. All rights reserved.

Rhino Linings Corporation 9747 Businesspark Avenue, San Diego, CA 92131 858-450-0441 | Fax 858-450-6881 800-422-2603 www.RhinoLinings.com 2023-10-04 Page 3 of 3 http://www.rhinolinings.com/