B08_Attachment_-_Compactors_Specification_Requirements.docx
DOCX document 43 KB Posted
- Attached to
- YELL- Refuse Compactors and Power Unit Federal contract opportunity
- Solicitation number
- 140P1424Q0070
About this file
This document is a technical specification for a set of refuse compactors and a power unit required by Yellowstone National Park (YELL). The key details are:
The acquisition is for three 30-cubic yard self-contained refuse compactors and one power unit, with detailed specifications provided for the compactor dimensions, materials, components, and hydraulic/electrical requirements. The compactors must be compatible with YELL's Stellar hook lift equipment, with specific lift capacity and dimensional requirements noted. The compactors and power unit must have a 1-year warranty. Delivery of the three compactors and one power unit is required by 10/15/2024, to be shipped FOB to YELL's Old Faithful Maintenance Yard. This acquisition is being solicited under Solicitation Number 140P1424Q0070 by the Department of the Interior National Park Service Intermountain Region.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140P1424Q0070_Amd_0001.pdf | ||
| B09_Amendment_1_-_Vendor_Q_As_-_140P1424Q0070_-_YELL_Compactors_Power_Unit_0001.docx | DOCX document | |
| B08_Attachment_-_Power_Unit_Configuration.pdf | ||
| Sol_140P1424Q0070.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specs Self Contained Refuse Compactor Yellowstone National Park
REQUIREMENT
This acquisition is in support of Yellowstone National Park (YELL) and is for Refuse Containment. To be eligible for award quotes shall meet the following minimum salient characteristics.
SPECIFICATIONS:
The compactor and container shall be a design that is combined into a single unit that has a built-in sump with up to 1100 gallons of liquid retention capacity. Compactors and power unit shall have a 1-year warranty.
Compactor:
| Total Nominal Cubic Yards | 30 cu | ||||||||
| Compactor & Container -O.A. length | 23 foot | ||||||||
| Container - O.A. Height | 102 inches | ||||||||
| Container - O.A. Width | 96 inches | ||||||||
| Compactor Loading – Height | 44 inches | ||||||||
| Compactor Platform-O.A. width | 76 inches | ||||||||
| Compactor & Container weight | 9920 lbs. | ||||||||
| Remote Power Unit w/Oil – Weight | 1000 | ||||||||
| Compactor Floor | (AR-235.-Alloy) | alloy thickness | ¼:” | ||||||
| Compactor Sump | (AR-235 Alloy) | alloy thickness | 1/4” | ||||||
| Compactor Side | (Reinforced) | alloy thickness | 3/16” | ||||||
| Breaker Bar | (Reinforced) | alloy thickness | L6X6x3/4” | ||||||
| Ram Floor | (Reinforced) | alloy thickness | ½” | ||||||
| Ram Face | ½” | ||||||||
| Ram Top (Reinforced) | 1/4” | ||||||||
| Ram Force | 5600 PSI minimum | ||||||||
| Container Floor | 3/16” | ||||||||
| Container Sides & Roof | (Reinforced) | 10 ga. | |||||||
| Guide Shoes | Nylatron. | ||||||||
| Container Door | 10 ga. | ||||||||
| Main Rail Tubes | 6x2x3/8” | ||||||||
| Door Latches | 4 each grease zerts | ||||||||
| Solid bull nose ends | (slip fitted and welded to main rails) | ||||||||
| Solid Bull nose roller | 4-inch x 6 inch | ||||||||
| Ground Rollers | 6-inch x 8-inch schedule 40 pipe with 1 ½ axle line with grease zerts | ||||||||
| Door design | Bubble door for strength | ||||||||
| Door seal | Rubber P seal | ||||||||
| Door latches | Ratchet binders to draw door closed. | ||||||||
| Compactor cylinder | 6-inch main ram cylinder | ||||||||
| Guide Ram | Equipped with replacement ram shoes. | ||||||||
| Compactor Scraper | Hinged floating scraper. | ||||||||
| Fire Port | One each |
Electric over Hydraulic Power unit: (Minimum requirements)
| Operation station shall include | Safety Key lock, pull to start button, push to stop, full container light. | |||
| Electric motor HP Power rating | 10 HP | |||
| Hydraulic flow rate | 12 gallons per minute | |||
| Hydraulic reservoir | 44 gallons | |||
| Hydraulic oil heater | Maintain temperatures of 40F Outside air can drop below -45F. | |||
| Specs on oil tank heater | Electric Immersion 500W (50 Fahrenheit activation temp) | |||
| Hydraulic hose rating | 2500 psi | |||
| Hydraulic hose fittings | 5000psi | |||
| Hydraulic hose length | 20 feet with disconnects on both ends of hose. | |||
| Hydraulic hose connection | 1-inch flat faced check valve, quick connects labeled pressure and return. (FEM-1001-16FP-NL) | |||
| Hydraulic fluid level indicator | Tank sight Guage equipped. | |||
| Hydraulic suction assembly | 1-inch stainless steel suction strainer (100 screen mesh) | |||
| Hydraulic filter (return side) | 10 C micron rating canister spin on filter 1 each | |||
| Directional valve | Soft shift-regen | |||
| Pressure gauge | 0-3000 psi operating pressure | |||
| Electrical requirements | 3 phase 208volts |
Slider hook-lift requirements:
YELL Stellar hook equipment specification, this hook lift system will be utilized to move and transport the compactors and all compactors’ specifications provided in this proposal shall be equipped with lifting and attaching capabilities to utilize YELL supplied equipment.
| Lifting Capacity: |
| 54" HH: 52,000 lbs. (23,587 kg) |
61.75" HH: 65,000 lbs. (29,484 kg)
| Dumping Capacity: |
| 65,000 lbs. (29,484 kg) |
| Dump Angle (A): |
| 50˚ |
| Effective Length (B): |
| 193" – 217" (4,902 – 5,512 mm) |
| Cab to Trunnion (C)*: |
| 170" – 190" (4,318 – 4,826 mm) |
| Shipping Weight: |
| Manual Adj: 6,600 lbs. (2,994 kg) |
Hydraulic Adj: 6,700 lbs. (3,039 kg)
| Rec. Body Lengths**: |
| 16' – 21.5' (4,876 – 6,858 mm) |
| Hook Height: |
| 54" or 61.75" (1,372 or 1,568 mm) |
| Min. Truck GVWR: |
| 54,000 lbs. (24,494 kg) |
Delivery Requirements:
Compactors shall be delivered as freight on board (FOB) to YELL for inspection by the designated park representative or approved designee.
The delivery location is less than ¼ mile from the Old Faithful Maintenance Yard located at 108 Imperial Road, Old Faithful, WY 82190.
Delivery is required by the following dates:
· Three Compactors to be delivered by 10/15/2024.
· One Power Unit to be delivered by 10/15/2024.
File details come from the government source that posted it. Updated .