The file's text, extracted by GovTribe without its formatting.
SPECIFICATIONS
STIHL MS 400 CM Gasoline Chainsaw [ BRAND NAME ONLY] Quantity: 20 Each Brand Name: STIHL MS 400 CM Model/Configuration: MS 400 CM with 25-inch guide bar and 33RS chain Salient Characteristics / Required Specifications The chainsaw shall meet the following minimum specifications:
| Requirement |
| Specification |
| Engine Type |
| Gasoline-powered chainsaw |
| Displacement |
| 4.1 cubic inches |
| Device Weight |
| Approximately 12.8 lbs., without guide bar and saw chain |
| Power-to-Weight Ratio |
| Approximately 2.4 lb/hp |
| Guide Bar Length |
| 25 inches |
| Automatic Oiler |
| Adjustable automatic oiler |
| Anti-Vibration |
| Anti-vibration system |
| Bumper Spikes |
| Equipped with bumper spikes |
| Decompression |
| Decompression valve |
| Lubrication |
| Ematic lubrication system |
| Air Filtration |
| Pre-separation air filtration system |
| Engine Technology |
| Reduced-emission engine technology |
| Starting System |
| ElastoStart or equivalent starting-assist system as applicable to the specified brand/model |
| Engine Management |
| M-Tronic electronic engine management system |
| Chain Brake |
| Quickstop chain braking system |
| Chain Tensioning |
| Side-access chain tensioner |
| Controls |
| Master control lever and throttle trigger lock |
| Fuel/Oil Caps |
| Toolless fuel and oil caps with retainers |
| Fuel Tank |
| Translucent fuel tank |
| Seasonal Operation |
| Winter/summer shutter |
Required Equipment and Configuration Each chainsaw shall be furnished complete and ready for operation, including the specified 25-inch guide bar and 33RS saw chain configuration. The equipment shall include all standard components necessary for normal operation of the specified chainsaw.
General Requirements
1. All equipment shall be new, unused, and current production. Used, refurbished, reconditioned, or previously operated equipment will not be accepted.
2. The equipment shall conform to the manufacturer's standard specifications for the specified model and configuration.
3. The equipment shall be suitable for professional chainsaw applications and normal outdoor operating conditions.
4. Manufacturer's standard operating, maintenance, and safety documentation shall be furnished with each unit.
5. The contractor shall provide equipment that is complete and functional upon delivery.
6. All required standard components, attachments, and accessories necessary for the specified configuration shall be included unless otherwise identified in the solicitation.
7. Product appearance may vary from photographs or illustrations; however, the delivered equipment shall provide the required functionality and meet the specifications stated herein.
8. Equipment shall comply with applicable federal, state, and local safety requirements.
Delivery The contractor shall deliver twenty (20) chainsaws meeting all specifications and requirements stated above. Delivery shall include all standard equipment, components, documentation, and accessories necessary for the intended use.
