B08_ATTACHMENT_0004_ACAD_DL054_KlassikDrain_Brochure_ENGLISH_2018.pdf

KlassikDrain Line

K50 - 2" internal width, steel edge channel

K100 - 4" internal width, steel edge channel

K200 - 8" internal width, steel edge channel

K300 - 12" internal width, steel edge channel

ACO DRAIN

ACO External Drainage alina Rectangle www.ACODrain.us

ACO DRAIN

ACO Drain is the market leading modular trench drain system and is ideal for commercial applications varying from gas stations to airports.

ACO Drain systems consist of factory manufactured, modular channel units made from either corrosion-resistant, polymer concrete or fiberglass, together with grates from a variety of materials for all loading applications.

ACO Drain systems are available in 2", 4”, 8” and 12” internal widths, and most systems are available with a built-in slope for up to 130 ft (40 meters) of continuous slope.

The ACO Drain product line is segmented into different product types depending on use:

1. KlassikDrain KlassikDrain - K100/K200/K300 MiniKlassik - K50 Brickslot

2. PowerDrain PowerDrain - S100K/S200K/S300K

2. Slab Solutions SlabDrain FlowDrain MembraneDrain

Typical applications

• Parking lots & garages

• Shopping malls

• Pedestrian areas

• Light industrial areas

• Commercial areas

• Internal applications

KlassikDrain

KlassikDrain is a general purpose trench drain system with choice of galvanized or stainless steel edge rail. A variety of grates are available in different materials and slot styles up to EN 1433 Load Class E (60 ton loading).

KlassikDrain is available in 2" (K50), 4” (K100), 8” (K200) and 12” (K300) internal width systems and features the patented DrainLokTM and

QuickLokTM boltless locking systems.

KlassikDrain with an integrally cast-in galvanized steel edge rail is the most commonly used product type.

KS50/KS100/KS200/KS300 are the same systems but with a grade

304 stainless steel edge rail, and are typically used where increased aesthetics, or corrosion resistance is required.

For a more discreet drainage solution, refer to Brickslot product brochure, the ACO Drain Technical Handbook, or contact your nearest ACO sales office for details.

www.ACODrain.us

A drainage grate’s primary function is to let surface water enter the drainage system and allow efficient removal of excess water.

These grates have to remove the quantity of water specified and be strong enough to withstand traffic without collapsing.

Freestyle grates ACO offers a semi-custom option with the opportunity to design the top surface look of an iron grate to complement your project design.

Standard grates ACO Drain provides a wide selection of standard grates for all sizes and types of channels. These offer the most economic option and encompass popular styles and materials.

Exotic grate solutions On rare occasions, the grate design and/or material becomes a focal point. For these projects, ACO can fully customize materials and/or finishes of grates to suit client requirements.

Grate selection

Design criteria for grate

� Water intake capacity � Loading � Material - durability & aesthetics � Slot style � Legal requirements

- ADA compliance

- Slip resistance

- Heel and bicycle safety � Locking

In recent years, the visual importance of these drainage systems has become more prominent.

As the global leader, ACO has introduced many different sized patterns and materials, including discreet drainage concepts such as Brickslot. The newest innovation is Freestyle

- an easy and cost effective way to design your own iron grate.

ACO now offers a surface and grate Visualizer - an online tool that offers designers the chance to visualize each ACO Drain grate in a number of different pavements. Visit www.ACODrain.us for details.

Steel edge rail - Provides additional strength and protects channel body from damage. Stainless steel edge rail also available.

Wide choice of grates - In various materials and styles (including ADA compliant) for applications from Load Class A to Load Class E.

KlassikDrain features

Interconnecting end profiles - Allows easy and effective joining of channels. Appropriate sealant can be used to create a sealed joint.

System numbering - Each end of the channel indicates the number of the channel that will connect to it.

K300 12” internal width

K200 8” internal width

Knock-outs - Included on certain channel units to allow vertical evacuation of the system along the run. See Product table for details.

QuickLok™ & DrainLok™ - Patented, boltless locking systems provide quick fitting and removal of grates. Helps reduce installation/maintenance time and cost.

www.ACODrain.us

Anti-shunt lugs - Protrusions in grate fit into recesses on the edge rail to prevent longitudinal movement.

Brickslot 100 & 200 - A discreet drainage solution for use with brick or stone pavers. Standard, Heel Resistant and Twinslot versions available.

Channel identification - Channels feature numbering on sidewalls and base of channel, allowing easy identification after concrete encasement.

Sloped (0.5%) channel units - Meter long units provide 131'-3” continuous slope equating to 1/17” fall per linear foot. Constant depth units can be used to extend run lengths.

Direction arrows - Cast on side of channel indicate flow direction and ensure channels are installed correctly.

Polymer concrete - A durable, yet lightweight material made from a polyester resin binder reinforced with mineral aggregates and fillers. It provides up to four times the compressive strength of cement concrete.

MiniKlassik K50 - A 2” internal width, constant depth system for high profile, aesthetic applications where a barrier is required to separate wet and dry areas.

Profiled side walls - Strengthening pillars and frost keys provide channel body strength and mechanical keying to surrounding concrete.

Shipping gipple/groove - Side interlocking feature ensures safer stacking of channels on pallets for shipping and minimizes breakage.

K100 4” internal width

K50 2” internal width

Universal closing /outlet end cap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Sloping channels

Constant depth channels

Half meter channels

Catch basins

31 32 33 34 35 36 37 38 39 40

Removable grates

Bottom knockout K100 - 4” & 6” K200 - 4” & 6” K300 - 6” & 8”

Installation device

Typical system layout - K100/K200/K300

K1-901G/S K2-902G/S

In-line catch basins Type 900 in-line catch basins are the same width as the trench run.

Uses same grate as trench run for seamless aesthetics.

Catch basin options

K3-903G/S

K1-901 & K2-902 in-line catch basins use same base.

Type 600 catch basins Type 600 catch basins are 12" wide, providing greater hydraulic output and maintenance access. K300 grates match/complement trench run.

K1-621G/S K2-621G/S

Polymer concrete catch basin top with steel edge rail and DrainLokTM grate, or QuickLokTM grate with removable QuickLokTM bar.

Optional plastic trash bucket.

Optional plastic riser to increase depth and hydraulic output.

Plastic catch basin base with choice of outlet sizes and locations.

Note:

"G" = galvanized steel rail "S" = stainless steel rail

Blanking end plate to match edge rail.

www.ACODrain.us

Parts table K100 - 4" internal width K200 - 8" internal width K300 - 12" internal width Part No Invert Weight Part No Invert Weight Part No Invert Weight

Galv S/S Inches2 Lbs Galv S/S Inches2 Lbs Galv S/S Inches2 Lbs 00 Constant depth channel - 39.37” (1m)1 74041 74441 3.94 28.1 75041 75441 7.87 83.6 76041 76441 11.81 132.6 1 Sloped channel - 39.37” (1m) 74001 74401 4.13 28.1 75001 75401 8.07 83.6 76001 76401 12.01 132.6 2 Sloped channel - 39.37” (1m) 74002 74402 4.33 28.9 75002 75402 8.27 84.7 76002 76402 12.20 133.8 3 Sloped channel - 39.37” (1m) 74003 74403 4.53 29.7 75003 75403 8.46 85.8 76003 76403 12.40 135.0 4 Sloped channel - 39.37” (1m) 74004 74404 4.72 30.5 75004 75404 8.66 86.9 76004 76404 12.60 136.2 5 Sloped channel - 39.37” (1m) 1 74005 74405 4.92 31.3 75005 75405 8.86 88.0 76005 76405 12.80 137.4 6 Sloped channel - 39.37” (1m) 74006 74406 5.12 32.1 75006 75406 9.06 89.1 76006 76406 12.99 138.6 7 Sloped channel - 39.37” (1m) 74007 74407 5.31 32.9 75007 75407 9.25 90.2 76007 76407 13.19 139.8 8 Sloped channel - 39.37” (1m) 74008 74408 5.51 33.7 75008 75408 9.45 91.3 76008 76408 13.39 141.0 9 Sloped channel - 39.37” (1m) 74009 74409 5.71 34.5 75009 75409 9.65 92.4 76009 76409 13.58 142.2 10 Sloped channel - 39.37” (1m) 1 74010 74410 5.91 35.3 75010 75410 9.84 93.5 76010 76410 13.78 143.4 010 Constant depth channel - 39.37” (1m)1 74043 74443 5.91 35.3 75043 75443 9.84 93.5 76043 76443 13.78 143.4 0103 Constant depth channel - 19.69” (0.5m)1 74044 74444 5.91 17.0 75044 75444 9.84 56.0 76044 76444 13.78 75.3 11 Sloped channel - 39.37” (1m) 74011 74411 6.10 36.1 75011 75411 10.04 94.6 76011 76411 13.98 144.6 12 Sloped channel - 39.37” (1m) 74012 74412 6.30 36.9 75012 75412 10.24 95.7 76012 76412 14.17 145.8 13 Sloped channel - 39.37” (1m) 74013 74413 6.50 37.7 75013 75413 10.43 96.8 76013 76413 14.37 147.0 14 Sloped channel - 39.37” (1m) 74014 74414 6.69 38.5 75014 75414 10.63 97.9 76014 76414 14.57 148.2 15 Sloped channel - 39.37” (1m) 1 74015 74415 6.89 39.3 75015 75415 10.83 99.0 76015 76415 14.76 149.4 16 Sloped channel - 39.37” (1m) 74016 74416 7.09 40.1 75016 75416 11.02 100.1 76016 76416 14.96 150.6 17 Sloped channel - 39.37” (1m) 74017 74417 7.28 40.9 75017 75417 11.22 101.2 76017 76417 15.16 151.8 18 Sloped channel - 39.37” (1m) 74018 74418 7.48 41.7 75018 75418 11.42 102.3 76018 76418 15.35 153.0 19 Sloped channel - 39.37” (1m) 74019 74419 7.68 42.5 75019 75419 11.61 103.4 76019 76419 15.55 154.2 20 Sloped channel - 39.37” (1m) 1 74020 74420 7.87 43.4 75020 75420 11.81 104.5 76020 76420 15.75 155.4 020 Constant depth channel - 39.37” (1m)1 74045 74445 7.87 43.4 75045 75445 11.81 104.5 76045 76445 15.75 155.4 0203 Constant depth channel - 19.69” (0.5m)1 74046 74446 7.87 20.5 75046 75446 11.81 64.0 76046 76446 15.75 82.3 21 Sloped channel - 39.37” (1m) 74021 74421 8.07 44.2 75021 75421 12.01 105.6 76021 76421 15.94 156.7 22 Sloped channel - 39.37” (1m) 74022 74422 8.27 45.0 75022 75422 12.20 106.7 76022 76422 16.14 157.9 23 Sloped channel - 39.37” (1m) 74023 74423 8.46 45.8 75023 75423 12.40 107.8 76023 76423 16.34 159.1 24 Sloped channel - 39.37” (1m) 74024 74424 8.66 46.6 75024 75424 12.60 108.9 76024 76424 16.54 160.3 25 Sloped channel - 39.37” (1m) 1 74025 74425 8.86 47.4 75025 75425 12.80 110.0 76025 76425 16.73 161.5 26 Sloped channel - 39.37” (1m) 74026 74426 9.06 48.2 75026 75426 12.99 111.1 76026 76426 16.93 162.7 27 Sloped channel - 39.37” (1m) 74027 74427 9.25 49.0 75027 75427 13.19 112.2 76027 76427 17.13 163.9 28 Sloped channel - 39.37” (1m) 74028 74428 9.45 49.8 75028 75428 13.39 113.3 76028 76428 17.32 165.1 29 Sloped channel - 39.37” (1m) 74029 74429 9.65 50.6 75029 75429 13.58 114.4 76029 76429 17.52 166.3 30 Sloped channel - 39.37” (1m) 1 74030 74430 9.84 51.4 75030 75430 13.78 115.5 76030 76430 17.72 167.5 030 Constant depth channel - 39.37” (1m)1 74047 74447 9.84 51.4 75047 75447 13.78 115.5 76047 76447 17.72 167.5 0303 Constant depth channel - 19.69” (0.5m)1 74048 74448 9.84 24.0 75048 75448 13.78 68.0 76048 76448 17.72 89.5 31 Sloped channel - 39.37” (1m) 74031 74431 10.04 52.2 75031 75431 13.98 116.6 76031 76431 17.91 168.7 32 Sloped channel - 39.37” (1m) 74032 74432 10.24 53.0 75032 75432 14.17 117.7 76032 76432 18.11 169.9 33 Sloped channel - 39.37” (1m) 74033 74433 10.43 53.8 75033 75433 14.37 118.8 76033 76433 18.31 171.1 34 Sloped channel - 39.37” (1m) 74034 74434 10.63 54.6 75034 75434 14.57 119.9 76034 76434 18.50 172.3 35 Sloped channel - 39.37” (1m) 1 74035 74435 10.83 55.4 75035 75435 14.76 121.0 76035 76435 18.70 173.5 36 Sloped channel - 39.37” (1m) 74036 74436 11.02 56.2 75036 75436 14.96 122.1 76036 76436 18.90 174.7 37 Sloped channel - 39.37” (1m) 74037 74437 11.22 57.0 75037 75437 15.16 123.2 76037 76437 19.09 175.9 38 Sloped channel - 39.37” (1m) 74038 74438 11.42 57.9 75038 75438 15.35 124.3 76038 76438 19.29 177.1 39 Sloped channel - 39.37” (1m) 74039 74439 11.61 58.7 75039 75439 15.55 125.4 76039 76439 19.49 178.3 40 Sloped channel - 39.37” (1m) 1 74040 74440 11.81 59.5 75040 75440 15.75 126.5 76040 76440 19.69 179.5 040 Constant depth channel - 39.37” (1m)1 74049 74449 11.81 59.5 75049 75449 15.75 126.5 76049 76449 19.69 179.5 0403 Constant depth channel - 19.69" (0.5m)1 74050 74450 11.81 27.5 75050 75450 15.75 77.0 76050 76450 19.69 97.7 Type 900 In-line catch basin - 19.69” (0.5m) 3 94608 94609 - 52.6 94611 94612 - 68.0 94614 94615 - 88.0 Type 900 In-line plastic trash bucket 01498 - 1.1 13999 - 1.2 Use Type 600 - - 621G/621S catch basin - 19.69” (0.5m) 3 631G/631S catch basin - 19.69” (0.5m) 4

94617 94631

94618 91632

55.8 65.8

94620 94633

94621 94634

91.0 91.0

Removable QuickLok locking bar (QL grates only) Type 600 Optional plastic riser Type 600 plastic trash bucket - short Type 600 plastic trash bucket - deep Foul air trap - fits both 900 & 600 basins

98717 99902 98653 98665 90854

0.1 10.0 3.5 4.0 1.2

10457 99902 98653 98665 90854

10.0 3.5 4.0 1.2

10458 99902 98653 98665 90854

10.0 3.5 4.0 1.2

K1-304-6 6" Inlet Cap K1-308-6 6" Outlet Cap K1-404-6 6" Inlet Cap K1-408-6 6" Outlet Cap

96839 96840 96834 96836

96844 96845 96846 96847

9.84 9.84 11.81 11.81

5.2 5.0 6.0 5.8

Universal end cap Debris strainer for 4" bottom knockout 4" Oval to 6" round outlet adaptor Installation device QuickLok locking bar (use with QuickLok grates) Grate removal tool

96822 93488 95140 97477 02899 01318

11.81

0.4 0.2 1.1 2.8 0.1 0.3

96821 93488

97478 10457 01318

15.75

1.4 0.2

4.0 0.5 0.3

96826

97479 10458 01318

19.69

2.5

4.9 0.7 0.3

Notes:

1. This channel offers bottom knockout feature; K100 - 4" round/6" oval, K200 - 4" & 6" round, K300 - 6" & 8" round.

2. Inverts shown are male end; for female invert depth - subtract 0.2" from male invert (except constant depth channels where it will be same as male invert).

To calculate overall channel depth; K100 - add 0.8" to invert depth; K200/K300 - add 1.0" to invert depth.

3. Catch basin assembly: Polymer concrete top with galvanized (G)/stainless (S) edge rail, blanking end kit, trash bucket and plastic base. Select appropriate grate (& locking bar) to suit.

4. Catch basin assembly: Polymer concrete top with galvanized (G)/stainless (S) edge rail, blanking end kit, deep trash bucket, riser and plastic base. Select appropriate grate (& locking bar) to suit.

K100/KS100 DrainLok™ grates Length mm

Part No

Wgt lbs

LOAD CLASS A - EN 1433 - 3,500lbs - 70psi

Type 410D Galv perforated Type 412D Galv perforated

12666 12667

6.3

3.2 ü ü ü ü 22.6

Type 451D S/S perforated Type 453D S/S perforated

12664 12665

6.3

3.2 ü ü ü ü 29.6

Type 420D Galv slotted Type 421D Galv slotted

12610 12611

5.9 3.0 ü 27.4

Type 450D S/S slotted Type 452D S/S slotted

12640 12641

5.9 3.0 ü 29.9

Type 494D Black plastic longitudinal

500 99575 1.8 ü ü 52.5

Type 495D Gray plastic longitudinal

500 99576 1.8 ü ü 52.5

Type 496D Tan plastic longitudinal

500 99577 1.8 ü ü 52.5

LOAD CLASS B - EN 1433 - 28,000lbs - 581psi

Type 447D S/S longitudinal Type 448D S/S longitudinal

142215 142216

8.0

4.0 ü ü ü ü 51.3

Type 438D Galv longitudinal Type 437D Galv longitudinal

132555 132550

10.0

4.2 ü ü ü 42.3

LOAD CLASS C - EN 1433 - 56,000lbs - 1,162psi

Type 492D Black composite slotted

500 132720 2.2 ü ü 86.4

Type 497D Gray composite slotted

500 132266 2.2 ü ü 35.6

Type 498D Tan composite slotted

500 132712 2.2 ü ü 35.6

Type 425D Galv slotted Type 426D Galv slotted

12614 12615

8.8 4.4 ü 27.4

Type 455D S/S slotted Type 457D S/S slotted

12644 12645

8.8 4.4 ü 29.9

Type 411D Galv perforated Type 413D Galv perforated

12656 12657

11.3

5.7 ü ü ü ü 22.6

Type 465D S/S perforated Type 466D S/S perforated

12654 12655

11.3

5.7 ü ü ü ü 29.6

Type 405D Galv mesh Type 406D Galv mesh

132880 132881

7.8

3.9 ü ü 52.1

Type 430D S/S mesh Type 431D S/S mesh

132882 132883

7.8

3.9 ü ü 41.3

Type 460D Iron slotted 500 12670 10.1 ü 35.6

Type 476D Iron longitudinal 500 142171 7.0 ü ü ü ü 25.8

Type 480D Iron wave 500 99578 8.0 ü ü ü 26.6

DrainLok™ removes the need for bolts and bars, improving channel hydraulics. The DrainLok™ mechanism simply clips into channel edge rail for rapid installation. ACO DrainLok™ grates are fitted with an anti-shunt mechanism that restricts unwanted grate movement, improving system durability and longevity.

DrainLok™ - boltless & barless locking system

Grate removal

Push down or stand on grate until it clicks into position.

To remove first grate, insert grate removal tool into slots at end of grate, pull up sharply. Remaining grates can be removed by hand.

Position grate onto channel and align anti-shunt detail with recess in rail.

Position grate

Lock grate www.ACODrain.us

K200/KS200 DrainLok™ grates Length mm

Part No

Wgt lbs

LOAD CLASS B - EN 1433 - 28,000lbs - 483psi

Type 647D S/S longitudinal Type 648D S/S longitudinal

142219 142220

17.7

9.0 ü ü ü ü 51.3

LOAD CLASS C - EN 1433 - 56,000lbs - 967psi

Type 611D Galv perforated Type 613D Galv perforated

138080 138081

21.0

10.5 ü ü ü ü 22.6

Type 665D S/S perforated Type 666D S/S perforated

138082 138083

21.0

10.5 ü ü ü ü 29.6

Type 660D Iron slotted 500 142177 18.0 ü 21.4

Type 676D Iron longitudinal 500 142173 18.0 ü ü ü ü 25.8

Type 680D Iron wave 500 99579 28.0 ü ü ü 26.6

K300/KS300 DrainLok™ grates Length mm

Part No

Wgt lbs

LOAD CLASS A - EN 1433 - 3,500lbs - 58psi

Type 847D S/S longitudinal Type 848D S/S longitudinal

142223 142224

28.6

14.5 ü ü ü ü 51.3

LOAD CLASS B - EN 1433 - 28,000lbs - 483psi

Type 811D Galv perforated Type 813D Galv perforated

138090 138091

30.9

15.0 ü ü ü ü 22.6

Type 865D S/S perforated Type 866D S/S perforated

138092 138093

30.9

15.0 ü ü ü ü 29.6

LOAD CLASS C - EN 1433 - 56,000lbs - 967psi

Type 805D Galv mesh 500 13819 29.5 ü 52.1

Type 830D S/S mesh 500 13849 29.5 ü 41.3

Type 860D Iron slotted 500 13870 38.0 ü 31.5

Type 876D Iron longitudinal 500 99588 35.0 ü ü ü ü 25.8

Type 880D Iron wave 500 99581 48.0 ü ü ü 26.6

Key

ASME A112.6.3 - 2001 Heel resistant slots less than 0.31” (8mm)

Compliant with Americans with Disabilities Act of 1990 Section 4.5.4

Bicycle Safe to Australian Standard AS 3996 - 2006

Anti-slip grates - Pendulum test BPN value over 24

Heel safe slots equal or less than 0.25” (6.35mm)

K200/KS200 QuickLok™ grates Length mm

Part No

Wgt lbs

LOAD CLASS C - EN 1433 - 56,000lbs - 967psi

Type 605Q Galv mesh Type 606Q Galv mesh

10352 10353

31.7 16.1 ü 52.1

Type 630Q S/S mesh Type 631Q S/S mesh

16032 16033

31.7 16.1 ü 41.3

Type 681Q Iron decorative 500 93956 27.0 ü ü 38.8

Type 679Q Iron mosaic 500 93957 34.0 ü ü 24.6

LOAD CLASS E - EN 1433 - 135,000lbs - 2,321psi

Type 678Q Iron longitudinal 500 138129 26.0 ü ü ü ü 25.8

Type 661Q Iron slotted 500 10351 37.0 59.9

K300/KS300 QuickLok™ grates Length mm

Part No

Wgt lbs

LOAD CLASS C - EN 1433 - 56,000lbs - 967psi

Type 881Q Iron decorative 500 93950 47.0 ü ü 38.8

Type 879Q Iron mosaic 500 93958 47.3 ü ü 24.6

LOAD CLASS E - EN 1433 - 135,000lbs - 2,321psi

Type 878Q Iron longitudinal 500 138130 52.9 ü ü ü ü 25.8

Type 861Q Iron slotted 500 10431 56.0 ü 50.8

K100/KS100 QuickLok™ grates Length mm

Part No

Wgt lbs

LOAD CLASS C - EN 1433 - 56,000lbs - 1,162psi

Type 481Q Iron decorative 500 97120 9.0 ü ü 38.8

Type 479Q Iron mosaic 500 97116 10.0 ü ü 24.6

LOAD CLASS E - EN 1433 - 135,000lbs - 2,788psi

Type 461Q Iron slotted 500 96752 10.2 ü 31.1

Type 435Q Galv slotted Type 436Q Galv slotted

31550 31551

13.7 6.8 ü 27.4

Type 490Q S/S slotted Type 493Q S/S slotted

31650 31651

13.7 6.8 ü 29.9

Type 478Q Iron longitudinal 500 03314 12.8 ü ü ü 25.8

Comprised of either a glass nylon stud or steel pin fitted to grate and a removable QuickLok™ bar in channel, QuickLok™ locks grate to channel by aligning stud over locking bar and applying pressure until they snap together. With no loose bolts or bars, QuickLok™ provides a highly secure boltless lock that is still easy to take apart for maintenance and cleaning. This saves time and money during installation.

QuickLok™ - boltless locking system

1 2

3 4

5 6

Grate removal

Locate locking bar in channel wall recesses by rotating clockwise. Use hammer to tap bar into place, so that serrated ends grip in recess.

To remove first grate, insert grate removal tool into slots at end of grate, pull up sharply. Remove remaining grates by hand.

To remove bar, insert screwdriver into hole at end of bar and lever back serrated end, rotate bar free.

To install grate, align QuickLok™ stud directly over locking bar. Push down or stand on grate until it clicks into position.

Fit grate

Fit locking bar www.ACODrain.us

K50/KS50 DrainLok™ grates Length mm

Part No

Wgt lbs

LOAD CLASS A - EN 1433 - 3,500lbs - 70psi

Type 210D Galv longitudinal 1000 138100 4.0 ü ü ü ü 23.9

Type 215D S/S perforated 1000 138101 4.0 ü ü ü ü 23.9

Type 220D Galv slotted 1000 138102 4.0 ü 24.4

Type 250D S/S slotted 1000 138103 4.0 ü 24.4

Type 200D Black plastic mosaic 500 138104 0.7 ü ü ü N/A

Type 201D Gray plastic mosaic 500 138105 0.7 ü ü ü N/A

Type 202D Tan plastic mosaic 500 138106 0.7 ü ü ü N/A

LOAD CLASS B - EN 1433 - 28,000lbs - 483psi

Type 247D S/S longitudinal 1000 142436 14.9 ü ü ü ü 31.6

LOAD CLASS C - EN 1433 - 56,000lbs - 1,162psi

Type 276D Iron longitudinal 500 138107 7.3 ü ü ü 21.1

Key

ASME A112.6.3 - 2001 Heel resistant slots less than 0.31” (8mm)

Compliant with Americans with Disabilities Act of 1990 Section 4.5.4

Bicycle Safe to Australian Standard AS 3996 - 2006

Anti-slip grates - Pendulum test BPN value over 24

Heel safe slots equal or less than 0.25” (6.35mm)

MiniKlassik - K50/KS50

Parts table K50 - 2" internal width Part No Invert Weight

Description Galv S/S Inches 2 Lbs Constant depth channel - 39.37” (1m)1 04071 06750 2.90 18.0 Steel closing end cap 95395 95403 - 0.3

Notes:

1. This channel offers 2" round bottom knockout feature.

2. To calculate Overall channel depth add 0.6" to invert depth.

Bottom knockout

K50/KS50 - 2”

Constant depth channels

Closing cap

Removable grates

Typical system layout - K50

© May 2018 ACO, Inc.

All reasonable care has been taken in compiling the information in this document. All recommendations and suggestions on the use of ACO products are made without guarantee since the conditions of use are beyond the control of the company. It is the customer’s responsibility to ensure that each product is fit for its intended purpose and that the actual conditions of use are suitable. ACO, Inc. reserves the right to change products and specifications without notice.

Re-order Part # DL054 v1.0

ACO, Inc.

West Sales Office Northeast Sales Office Southeast Sales Office 825 W. Beechcraft St. 9470 Pinecone Drive 4211 Pleasant Road Casa Grande, AZ 85122 Mentor, OH 44060 Fort Mill, SC 29708 Tel: (520) 421-9988 Tel: (440) 639-7230 Toll Free: (800) 543-4764 Toll Free: (888) 490-9552 Toll Free: (800) 543-4764 Fax: (803) 802-1063 Fax: (520) 421-9899 Fax: (440) 639-7235 Electronic Contact:

info@acousa.com www.acodrain.us

Other ACO products

Exernal drainage

ACO Sport Surface drainage and building accessories for track & field.

ACO Infrastructure Surface drainage products engineered for highways, urban roads and bridges.

Aquaduct Custom design and manufacture of fiberglass trench drain systems.

ACO Duct Linear ducting system with removable solid covers.

ACO Environment Oil water separators and spill containment systems.

ACO Wildlife Tunnel and fence system to guide amphibians and other small creatures safely across roads.

ACO StormBrixx A unique and patented plastic geocellular storm water management system.

ACO Self Simple drainage and building components for use around the home, garden and office.

Building drainage

ACO Stainless Stainless steel trench drains.

ACO Floor Drain Stainless steel floor drains.

ACO BuildLine Drainage products for thresholds, balconies, green roofs and building façades.

ACO Pipe Stainless steel push-fit pipe system.

ACO ShowerDrain Shower drainage.

QuARTz Designer bathroom floor solutions.