B08_Attachment 0002_RFI Questionnaire.xlsx
XLSX spreadsheet 21 KB Posted
- Solicitation number
- W519TC-25-Q-CMMM
About this file
This document is a Request for Information (RFI) Questionnaire for a Coordinate Measuring Machine (CMM) modernization project. The U.S. Army Materiel Command Contracting Command at Rock Island Arsenal is seeking to replace existing inspection equipment with two Zeiss Contura 9/12/6 CMMs. The RFI questionnaire requires potential vendors to provide detailed technical specifications about their CMM offerings, including capabilities such as air bearing operation, dimensional fit, measurement accuracy, scanning modes, and software features.
The solicitation (W519TC-25-Q-CMMM) is currently in pre-solicitation stage, with responses to the RFI questionnaire due by 1:00 PM CST on September 4, 2025. Vendors must be registered in the System for Award Management (SAM) and will be evaluated based on their CMM's technical capabilities, including precision measurement tolerances (as low as 0.000079 inches), graphical control software, GD&T evaluation capabilities, and overall system interoperability. The procurement will use NAICS code 333310 and is open to small businesses, including 8(a) designated firms.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| RFQ Response - X-Ray Preventative Maintenance, Software Upgrades and Emergency Repairs | |
| Contractor Name: | Business Size: |
Small Large Disadvantaged (specify) 8(a)
| Notice ID: W519TC-25-Q-CMMM |
| Date: |
| NAICS Code(s): 333310 |
| Question | Comments | ||
| Does the bridge-style CMM run on air bearings? | Yes | No | |
| Will the machine arrive ready to install, including all required filters, dryers for air lines, and configured for 100–240 V (50–60 Hz)? | Yes | No | |
| What are the installed footprint dimensions (L × W × H)? Can the unit fit through a 6 ft × 7 ft opening? | Yes | No | |
| Does the CMM achieve a scanning error of ≤ 0.00012 inches? | Yes | No | |
| Does single-point measurement error meet ≤ 0.000079 inches? | Yes | No | |
| Does the CMM support passive and/or active contact scanning? | Yes | No | |
| Is the control software fully graphical, requiring no manual drive-point coding? | Yes | No | |
| Can the software Program, calculate, and output full GD&T evaluations per blueprints/TDP? | Yes | No | |
| Does the CMM include the Calypso Software Package? | Yes | No | |
| Are all components from a single manufacturer (brand-name or equivalent) to ensure interoperability without modification? | Yes | No | |
| Final remarks for consideration for the Contracting Team: |
File details come from the government source that posted it. Updated .