B08_Att1_SOW.pdf
PDF 77 KB Posted
- Attached to
- LAKE23-0155 KATHERINE LANDING HYDROHOIST
- Solicitation number
- 140P8123Q0103
About this file
This document includes a statement of work and specifications for a floating boat lift to be installed at Katherine Landing marina in Lake Mead National Recreation Area. The lift must be able to support boats weighing up to 20,000 pounds, operate in a minimum water depth of 6.5 feet, and be suitable for a 33-foot Silver Ships Explorer vessel. The vendor will be responsible for acquiring, delivering, and installing the lift within six months of contract award according to the operating hours of the marina, which is located in Arizona near Bullhead City. The lift must be able to lower the boat into the water manually if power is lost and be able to withstand extreme heat above 100 degrees Fahrenheit for over 100 days per year. Proof of relevant government agency experience is required, and repair services must be available locally. The related federal contract opportunity is solicitation number 140P8123Q0103 to acquire and install this lift at Katherine Landing marina for the Department of the Interior National Park Service Pacific West Region.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| B03__Att2_SCA_WD.pdf | ||
| Sol_140P8123Q0103.pdf | ||
| B08_RFQ_140P8123Q0103.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specifications and Statement of Work
Specifications:
-Floating mat boat lift
-Floating boat lift that uses air to fill tanks below a floating mat that lift boat completely clear of the water
-18,000 to 20,000 lb. boat capacity
-Min. Water Depth, 6.5 ft
-To be attached to floating dock that is secured by cables and anchors
-Only straight edge is available for attaching the lift. This is not in a U-shape slip.
-Lift should be simple to operate with valve control and power switch for the air pump.
-Lift shall be for v-hull boat – specifically for a Silver Ships Explorer with measurements of 33’ by 10.5’.
-Lift will be installed and permanently attached to a dock
-Lift shall be able to drop the vessel into the water in a controlled manner and without physical exertion in the event electrical power is lost to the lift pump control unit.
-Lift will be used in an extreme climate where heat exceeds 100 degrees Fahrenheit for over 100 days per year, and over 115 degrees Fahrenheit for at least 60 to 75 days per year.
-Service/repair for the boat lift should be available within a reasonable response area
Statement of Work:
-Vendor will acquire, deliver, and install floating boat lift the old houseboat dock section at Katherine Landing marina. Katherine Landing is a developed area with a marina that is part of the Lake Mead National Recreation Area. The marina facilities are government owned, but concession operated.
Katherine Landing is located in Arizona, off of Arizona Highway 68, just outside of Bullhead City, AZ.
-Work can only take place Monday through Friday, avoiding any holidays that may fall on those days.
-Work will take place during the marina operating hours.
-Work shall be completed within 6 months of contract award.
-Vendor will be responsible for installation of new lift and removal of all shipping and work materials.
-Government employees can assist with moving the lift from the launch ramp to the installation site by means of towing with a government boat.
-Vendor shall provide proof of experience providing this product and service to government agencies.
File details come from the government source that posted it. Updated .