B08_ATCH_3_DRAWINGS.pdf
PDF 3 MB Posted
- Attached to
- Reel Drive Components IAW SOW, Workmanship, & Dwgs Federal contract opportunity
- Solicitation number
- 140G0126Q0087
About this file
This is a technical drawing package from the United States Department of the Interior, Geological Survey, Water Resources Division for a Hydrologic Instrumentation Facility. The documentation consists of engineering drawings and parts lists for multiple assemblies and components used in what appears to be a water measurement or monitoring device.
The package includes detailed specifications for approximately 30 component drawings and assemblies, including a base plate (aluminum 6061-T6), spacers (plastic), processor guard weldments (stainless steel), bearing mounts, brake systems, shaft assemblies, controller components, enclosures, and various fastening hardware. Key materials specified include aluminum (Types 6061-T6 and 6061-T6), stainless steel (Types 303 and 304), acetal (Delrin), polycarbonate, and PVC. The drawings employ third-angle projection with metric/inch dual dimensioning and comprehensive tolerance specifications. All drawings were prepared by Erma Nilsson and carry approval signatures. Most component drawings are dated 8-3-10, with one controller cover revision dated 4-15-19. The package includes references to suggested commercial sources such as McMaster Carr Supply Company and Stock Drive Products for standard components like bearings, inserts, fasteners, and lubricants. No procurement dates, response deadlines, award dates, or pricing information is provided in these technical specifications.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| B08_ATCH_1_SOW.pdf | ||
| B08_ATCH_2__WORKMANSHIP.pdf | ||
| Sol_140G0126Q0087.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NOTES:
1. REMOVE ALL BURRS AND SHARP EDGES.
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
D
1/2
ERMA NILSSON
BASE PLATE
ALUMINUM, TYPE 6061-T6 1
0651003FULL -
8-3-10
.813 [20.64] 3.150 [80.00]
4.500 [114.30]
7.750 [196.85]
1.622 [41.20]
2.756 [70.00]
3.000 [76.20]
1.500 [38.10]
1.125 [28.58]
9.0 [229]
1/2-13 UNC-2B THRU
.13 [3.2] X 45° CHAM
ALL 4 CORNERS
AROUND TOP SURFACE
AROUND BOTTOM SURFACE
B
C
A
4X 21/64 (.328) DRILL THRU
.38 [9.5]
3/4 (.750)
STOCK
.50 [12.7]
5.00 [127.0]
6.0 [152]
STOCK
.030 [0.76] A B C
.030 [0.76] A B C
.030 [0.76] A B C .007 [0.18]
2X 1/4-20 UNC-2B THRU
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
B
SPACER
PLASTIC, 1/4 (.250) THICK 2
0651004FULL -
6-12-23
1.00 [25.4]
2.00 [50.8]
.38 [9.5]
.75 [19.1]
1/4 (.250)
STOCK
17/64 (.265) DRILL THRU
PROCESSOR GUARD HANDLE10651007C3
PROCESSOR GUARD BASE10651006C2
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
0651005FULL -
PROCESSOR
GUARD WELDMENT
G
FLUSH FLUSH
90°
G
REF
REF
REF
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
PROCESSOR GUARD BASE
0651006FULL -
STAINLESS STEEL, TYPE 304,
3/4 (.750) X 3/16 (.187) FLAT BAR
B
9/32 (.281) DRILL THRU2X 21/64 (.328) DRILL THRU
2X 1/2 (.500) DRILL THRU2X FULL R
3/4 (.750)
STOCK
9.3 [235.7]
REF
.250 [6.35]
.375 [9.53]2.750 [69.85]
.375 [9.53]
1.375 [34.93]
5.500 [139.70]
8.531 [216.69]
A 3/16 (.187)
C
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
0651007FULL -
PROCESSOR GUARD
HANDLE
STAINLESS STEEL TUBING, TYPE 304,
1/2 (.500) OD X .035 [0.89] WALL THICKNESS
5.00 [127.0]
5.25 [133.4]
1/2 (.500) OD X .035 [0.89] WALL
STOCK
5.500 [139.70]
R1.25 [31.8]2X
2.50 [63.5]
CAPTIVE NUT, ROUND HEAD BROACH, SST,
#8-32 UNC
896439A300 1
NOTES:
1. REMOVE ALL BURRS AND SHARP EDGES.
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
4 INSTALL NUTS, ITEM 1 , WHERE SHOWN PER
MANUFACTURES SPECIFICATIONS.
5 SUGGESTED SOURCE OF SUPPLY:
McMASTER CARR SUPPLY COMPANY
P.O. BOX 740100
ATLANTA, GA 30374-0100
P/N: 96439A300
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
D
CONTROLLER MOUNT
0651008FULL -
ALUMINUM, TYPE 6061-T6,
.125 [3.18] SHEET
2.75 [69.9]
.78 [19.8]
3.150 [80.00]
1.00 [25.4]
3.16 [80.2]
.50 [12.6]
.50 [12.6]
R.13 [3.2]4X
2.13 [54.0]
1.47 [37.3]
.46 [11.7]
5.125 [130.18]
2.50 [63.5]
5.23 [132.8] 5.250 [133.35]
4.50 [114.3]
.50 [12.7] 1.25 [31.8]
7.03 [178.6] 2.63 [66.7]
8 PLCS
.20 [5.2]
1.09 [27.8]
4.094 [103.97]
5.86 [148.8]
.46 [11.7]
.63 [15.9] 3X 17/64 (.266) DRILL THRU
4X 17/64 (.266) DRILL THRU
.520 [13.2] X 100°
8X .213.002 [5.410.05] THRU
.47 [11.9]
9.031 [229.39]
6.06 [154.0]
11.72 [297.7]
RETAINING COMPOUND, LOCTITE, SERIES 680,
GREEN
A/R91458A123 6
MACHINE KEY, SQUARE, UNDERSIZED, STEEL,
1/4 (.250) SQUARE x 3.0 [76] LONG
198870A265 5
MACHINE KEY, SQUARE, UNDERSIZED, STEEL,
3/16 (.187) SQUARE x 2.0 [51] LONG
198870A180 4
COUPLING, HELICAL BEAM SHAFT, CLAMP-ON,
7075 ALUMINUM, 3/8 X 3/8 SHAFT DIAMETER,
1.0 LONG, 1.0 O.D.
16208K496 3
ENCODER SHAFT10651013B2
MAIN SHAFT10651012D1
NOTES:
1. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
2. (.XXX) = DECIMAL EQUIVALENT.
3 APPLY RETAINING COMPOUND, ITEM 6 , ONTO
ENCODER SHAFT, ITEM 2 . INSERT ENCODER
SHAFT INTO MAIN SHAFT, ITEM 1 , TO DIMENSION
SHOWN. MAINTAIN DIMENSION SHOWN WHEN
ENCODER SHAFT IS INSERTED INTO COUPLING,
ITEM 5 . REMOVE EXCESS RETAINING COMPOUND.
4 TIGHTEN THE CLAMPING SCREWS ON THE COUPLING,
ITEM 3 TO SECURE TO ENCODER SHAFT, ITEM 2 .
5 SUGGESTED SOURCE OF SUPPLY:
McMASTER CARR SUPPLY COMPANY
P.O. BOX 740100
ATLANTA, GA 30374 -0100
P/N: 6208K496; 98870A180; 98870A265; 91458A123
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
D
SHAFT ASSEMBLY
0651011FULL -
.75 [19.1]
REF
REF
.25 [6.4]
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3 SUGGESTED SOURCE OF SUPPLY:
STOCK DRIVE PRODUCTS
2101 JERICHO TURNPIKE
NEW HYDE PARK, NY 11042
P/N: A 7X 1-12360
(SUPPLIED IN 36" LENGTHS)
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
B
ENCODER SHAFT
STAINLESS STEEL, TYPE 303 1
06510132X -
1.50 [38.1]
.3747 - .0002 .0000+ 9.517 - 0.005
0.000+[ ]
STOCK
2X .03 [0.8] X 45° CHAM
RETAINING RING, INTERNAL, SST,
2.210 [56.13] X .062 [1.57] THICK
291580A246 3
BEARING, STEEL BALL, DOUBLE SEALED,
20 mm ID X 52 mm OD X 15 mm WIDE
15972K56 2
BEARING MOUNT10651015C1
NOTES:
1 SUGGESTED SOURCE OF SUPPLY:
McMASTER CARR SUPPLY COMPANY
P.O. BOX 740100
ATLANTA, GA 30374 -0100
P/N: 5972K56, 91580A246
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
0651014FULL -
BEARING MOUNT
ASSEMBLY
REF
REF
REF
2 PLCS
SECTION A-A
A
A
NOTES:
1. REMOVE ALL BURRS AND SHARP EDGES.
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
D
MAIN SHAFT
STAINLESS STEEL, TYPE 303 1
0651012FULL -
10.12 [257.0]
3.8 [97]
6.88 [174.8] .56 [14.2]
.787 - .001 .000+ 19.99 - 0.03
0.00+[ ]
1.000 - .002 .000+ 25.40 - 0.05
0.00+[ ]
.750 - .002 .000+ 19.05 - 0.05
0.00+[ ]
R.06 [1.5] 2X .03 [.8] X 45° CHAM
3.50 [88.9].12 [3.0]
2.50 [63.5]
.188 - .000 .002+ 4.76 - 0.00
0.05+[ ] .106 [2.69].141 [3.58]
.250 - .000 .002+ 6.35 - 0.00
0.05+[ ]
"I" (.277) DRILL 1.3 [33]
5/16-24 UNF-2B .8 [20]
.375 - .000 .001+ 9.53 - 0.00
0.03+[ ] 1.0 [25]
R.06 [1.5]
.98 [24.9]
.005 [0.13] A
.002 [0.05] A .002 [0.05] A
.002 [0.05] A
A
NOTES:
1. REMOVE ALL BURRS AND SHARP EDGES.
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
BEARING MOUNT
0651015FULL -
2.13 [54.0]
2.13 [54.0]
1.438 [36.51]
1.438 [36.51]
1.438 [36.51] 1.438 [36.51]
2.13 [54.0] 2.13 [54.0]
4X 21/64 (.328) DRILL THRU
4.80 [121.9]
2.50 [63.5]
1.25 [31.8]
.907 [23.03]
REF
.188 [4.76]
.156 [3.96]
R.06 [1.5]
R.13 [3.3]
R.02 [0.4] MAX
2.755 - .002 .000+ 69.98 - 0.05
0.00+[ ]
.002 [0.05] A
.03 [0.8] X 45° CHAM
.352 [8.93]
.086 [2.18]
.595 [15.11].086 [2.18]
2.171 [55.14] 2.047.001 51.990.03[ ] THRU
.015 [0.38] A
A A
BRAKE ANCHOR PIN10651018B2
MAIN GUARD MOUNT10651017C1
NOTES:
1 CHAMFER END OF PIN OR COUNTERSINK HOLE AS
NEEDED FOR OPTIMUM WELD STRENTH.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
0651016FULL -
MAIN GUARD MOUNT
WELDMENT
45°
90°
FLUSH
G
REF
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
4 OMIT HOLE ON ONE PART REQUIRED.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
MAIN GUARD MOUNT
STAINLESS STEEL, TYPE 304 2
0651017FULL -
6.75 [171.4]
2.63 [66.7]
R.13 [3.2]2X 45°45° 3/4 (.750)
STOCK
3/16 (.187)
STOCK
2X FULL R
.375 [9.52]
.13 [3.2]
4X 21/64 (.328) DRILL THRU
6.000 [152.40]
2.875 [73.03] 1.94 [49.2]
.375 [9.52]
3/8 (.375) DRILL THRU 4
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
B
BRAKE ANCHOR PIN
STAINLESS STEEL, TYPE 304 1
06510182X -
1.63 [41.3]
#41 (.096) DRILL THRU
3/8 (.375)
STOCK .13 [3.2]
.02 [0.5] X 45° CHAM
NICKEL ANTI-SEIZE LUBRICANTA/R1028K66 5
WASHER, LOCK SPLIT, SST, 5/16 (.312) SIZE492146A030 4
SCREW, CAP, HEX HEAD, SST,
5/16-24 UNF X 5/8 (.625) LONG
492240A302 3
BRAKE DRUM, 4" SIZE, NO FLANGE12541 2
BRAKE HUB10651020C1
A
A
NOTES:
1. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
2. (.XXX) = DECIMAL EQUIVALENT.
3 MIL .01 [0.25]
4 APPLY A THIN COAT OF ANTI-SEIZE LUBRICANT,
ITEM 5 ON THREADED FASTENERS.
5 SUGGESTED SOURCE OF SUPPLY:
a) AZUSA ENGINEERING INCORPORATED
1542 INDUSTRIAL PARK STREET
COVINA, CA 91722
P/N: 2541
b) McMASTER CARR SUPPLY COMPANY
P.O. BOX 740100
ATLANTA, GA 30374-0100
P/N: 92240A302; 92146A030; 1028K66
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
BRAKE HUB ASSEMBLY
0651019FULL -
4 PLCS
3 4
3 4
5 a
5 b
5 b
4 5 b
DETAIL B
SCALE: 4X
DETAIL C
A
A
NOTES:
1. REMOVE ALL BURRS AND SHARP EDGES.
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
BRAKE HUB
0651020FULL -
SEE DETAIL B
SEE DETAIL C
MINIMUM UNDERCUT
SHAPE OPTIONAL
.188 - .000 .002+ 4.78 - 0.00
0.05+[ ]
.844 - .000 .004+ 21.44 - 0.00
0.10+[ ]
.750 - .000 .001+ 19.05 - 0.00
0.03+[ ] THRU
1.38 [35.1] 1.996.001 50.700.03[ ]
.002 [0.05] A
1.13 [28.7]
REF
.38 [9.7]
.06 [1.5] X 45° CHAM
R.13 [3.2]
3.50 [88.9]
2.875 [73.03]
BOLT CIRCLE
4X 5/16-24 UNF-2B THRU
.015 [0.38] A
.007 [0.18]
.19 [4.8] X 45° CHAM
.69 [17.5]
.002 [0.05] A
.06 [1.5] X 45° CHAM
.31 [7.8]
A
.015 [0.38] X 45° CHAM
90°4X
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
4 SUGGESTED SOURCE OF SUPPLY:
McMASTER CARR SUPPLY COMPANY
P.O. BOX 740100
ATLANTA, GA 30374-0100
P/N: 61135K12
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
B
BRAKE ADJUSTING KNOB
0651023FULL -
KNOB, FOUR ARM,
ALUMINUM, SOLID HUB
1/4-20 UNC-2B THRU
ALTERED ITEM DRAWING
5/8 (.625)
REF
1-1/2 (1.500)
REF
1/2 (.500)
REF
3/8 (.375)
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
SHAFT ENCODER MOUNT
0651025FULL -
1.438 [36.53]1.438 [36.53]
2.13 [54.0]2.13 [54.0]
1.438 [36.53]
1.438 [36.53]
2.13 [54.0]
2.13 [54.0]
4X 21/64 (.328) DRILL THRU
.015 [0.38] A
.707 [17.96].707 [17.96]
.707 [17.96]
.707 [17.96]
4.80 [121.9]
2.755 - .002 .000+ 69.98 - 0.05
0.00+[ ]
.002 [0.05] A
.03 [0.8] X 45°CHAM
R.02 [0.4] MAX
.281 [7.14]
REF
.125 [3.18]
.156 [3.96]
.970 - .000 .001+ 24.64 - 0.00
0.03+[ ] THRU
4X 5/32 (.156) DRILL THRU
.015 [0.38] A
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
CONTACTOR MOUNT
0651027FULL -
4.00 [101.6]
.75 [19.1] 2.50 [63.5]
R.13 [3.2]2X
2.19 [55.6]
.25 [6.4]
3/16 (.187)
STOCK
6X .1 [3] X 45° CHAM
.50 [12.7]
1.250 [31.75]
.56 [14.3]
.906 [23.01]1.750 [44.45]
2.875 [73.03]
2X 3/16 (.187) DRILL THRU
2X 21/64 (.328) DRILL THRU
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
FUSE ANCHOR BLOCK
ACETAL, BLACK 1
06510292X -
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
1.38 [34.9]
.50 [12.7]
1.13 [28.6]
.50 [12.7]
.25 [6.4] .25 [6.4]
.50 [12.7]
#3 (.213) DRILL .37 [9.5]
1/4-28 UNF-2B .31 [7.9]
.25 [6.4]
.50 [12.7]
21/64 (.328) DRILL THRU
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
0651033FULL -
MOTOR MOUNTING
PLATE
.375 [9.51]
.063 [1.59]
.312 [7.92]
3.000 .002 76.200.05[ ] THRU
4X 25/64 (.390) DRILL THRU
.94 [23.8] X 82°
4.000 [101.60]
BOLT CIRCLE
5.875 [149.23]
BOLT CIRCLE
4X 21/64 (.328) DRILL THRU
.030 [0.76] A
.010 [0.25] A
4.495 .002 114.170.05[ ]
90°4X
6.50 [165.1]
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
D
CONTROLLER COVER
PVC SHEET, GRAY, .062 [1.57] THICK 1
0651038FULL -
4-15-19
SHEET 1 OF 2
6.04 [153.4]
.39 [9.9] 5.26 [133.6]
7.32 [186.0]
.12 [3.1]
11.78 [299.2]
2.80 [71.1]1.10 [27.9]
2.94 [74.6]
2.75 [69.9]
1.10 [27.9]
1.00 [25.4] 1.00 [25.4]
.94 [23.8]
1.00 [25.4]
REF
2.94 [74.6]
REF
2.75 [69.9]
REF
.062 [1.57]
STOCK
4.094 [103.97]
3.16 [80.2]
.47 [11.9]
1.00 [25.4]
.61 [15.6]
1.10 [27.9]
.40 [10.2]
1.20 [30.5]
.80 [20.3]
3.71 [94.3]
2.73 [69.4]
.12 [3.1]
3.63 [92.2]
.12 [3.1]
1.64 [41.6]
1.06 [26.9]
.56 [14.3]
5.35 [135.9]
3.63 [92.2]
2.46 [62.5]
.96 [24.4]
1.46 [37.1]
3.72 [94.4]
3.63 [92.2]
.30 [7.6]
.75 [19.1]
.30 [7.6]
.75 [19.1]
2.625 [66.68]
.52 [13.2]
3.63 [92.2]
R.09 [R2.3]
R.23 [R5.9]
R.09 [R2.3]
R.23 [R5.9]
R.24 [R6.0]
R.09 [R2.3]
R.09 [R2.3]
2X .250 [6.35] THRU
6X .172 [4.37]
THRU
.19 [4.9]
R.20 [R5.0]
1.36 [34.5].13 [3.4]
.20 [5.0]
.44 [11.1]
1.250 [31.75]
5.657 [143.68]
.82 [20.8]
2.17 [55.1]
4.28 [108.7]
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
D
CONTROLLER COVER
PVC SHEET, GRAY, .062 [1.57] THICK 1
0651038FULL -
4-15-19
SHEET 2 OF 2
11.20 [284.5]
2.80 [71.0]
.13 [3.4]
.40 [10.2]
.80 [20.3]
1.20 [30.5]
1.36 [34.5]
7.32 [186.0]
1.00 [25.4]
5.60 [142.2] 5.60 [142.2]
1.00 [25.4]
.30 [7.6]
3.63 [92.2]
3.63 [92.2]
2.89 [73.4]
3.83 [97.3]
.94 [23.9]
.39 [9.9] .39 [9.9]
.75 [19.1]
.47 [11.9]
1.10 [27.9]
.57 [14.5]
1.64 [41.6]
1.06 [26.9]
.44 [11.1]
1.250 [31.75]
2.46 [62.5]
3.63 [92.2]
.96 [24.4]
1.46 [37.1]
.94 [23.9]
.47 [12.0]4.094 [103.97]
.938 [23.82]
.52 [13.2]
2.625 [66.68]
15.50 [393.8]
.30 [7.6] .75 [19.1]
.20 [5.0]
R.20 [R5.0]
R.09 [R2.3]
R.24 [R6.0]
5.35 [135.9]
2.17 [55.1]
4.28 [108.7]
2X .250 [6.35] THRU
6X .172 [4.37]
THRU
2.58 [65.5] .39 [9.9]2.58 [65.5].39 [9.9]
FLAT PATTERN
TUBE INSERT40651042B3
CROSS TUBE20651041C2
MAIN TUBE20651040D1
NOTES:
1. REMOVE ALL BURRS AND SHARP EDGES.
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3 INSERT TUBE INSERT, ITEM 3 , FLUSH WITH ENDS
OF MAIN TUBE, ITEM 1 , AND WELD IN PLACE.
ENSURE THAT THREADS ARE RESTORED AFTER
WELDING.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
D
MAIN GUARD WELDMENT
06510393/4 -
REF
REF
REF
REF
REF
2 PLCS
2 PLCS
2.0 [51] 2.0 [51]
90° 90°
90°90°
90° 90°
6.0 [152]
REF
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
D
MAIN TUBE
STAINLESS STEEL TUBING, TYPE 304 2
0651040FULL -
1/2 (.500) OD TUBE
X .035 [0.89] WALL THICKNESS
STOCK
R1.25 [31.8]4X
8.63 [219.1]
5.75 [146.1]
14.50 [368.3]
3.44 [87.3]
2.13 [54.0]
.44 [11.1]
DEEP
.44 [11.1]
DEEP
.437.003 11.100.08[ ]
.015 [0.38] X 45° CHAM
.437.003 11.100.08[ ]
.015 [0.38] X 45° CHAM
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
CROSS TUBE
TUBING, STAINLESS STEEL, TYPE 304 2
0651041FULL -
1/2 (.500) OD TUBE
X .035 [0.89] WALL THICKNESS
STOCK
5.50 [139.6]
5.94 [150.9]
REF
R.25 [6.4]2X
TRIM SHARP EDGE BOTH
ENDS AS NEEDED
6.0 [152]
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
B
TUBE INSERT
STAINLESS STEEL, TYPE 304 4
06510422X -
.44 [11.1]
5/16-24 UNF-2B THRU
2X .03 [0.8] X 45° CHAM
.425 - .005 .000+ 10.80 - 0.13
0.00+[ ]
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
0651044FULL -
MOUNTING PLATE
1.750 [44.45]
3.50 [88.9]
2.750 [69.85]
2.75 [69.9]
2.062 [52.37]
.375 [9.53]
.875 [22.23] .350 [8.89]
4X .13 [3.3] X 45° CHAM
2X 21/64 (.328) DRILL THRU
2X #15 (.180) DRILL THRU
.350 [8.89] X 82°
1/8 (.125)
STOCK
.015 [0.38] A B C .005 [0.13]
C
B
A
.015 [0.38] A B C .005 [0.13]
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
4 BOTTOM IS PART OF ENCLOSURE LID, DRAWING
NO. 0651049.
5 SUGGESTED SOURCE OF SUPPLY:
HAMMOND MANUFACTURING CO. INC.
475 CAYUGA RD #100
CHEEKTOWAGA, NY 14225-1309
P/N: R100-084-000
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
ALUMINUM 1
0651047FULL -
ENCLOSURE BOTTOM
.531 [13.49]
.531 [13.49]
3.15 [80.0]
.531 [13.49]
.531 [13.49]
1.00 [25.4]
4X 1/8 (.125) DRILL THRU
1.125 [28.58] THRU
ALTERED ITEM DRAWING
6.30 [160.0]
REF
3.14 [79.7]
REF
1.65 [41.9]
REF
1.06 [26.8]
15/32 (.468) DRILL THRU
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
4 DIMENSIONS ARE MEASURED FROM THE EDGE OF
THE BOX NEAR THE GASKETED SURFACE.
5 LID IS PART OF ENCLOSURE BOTTOM, DRAWING
NO. 0651047.
6 SUGGESTED SOURCE OF SUPPLY:
HAMMOND MANUFACTURING CO. INC.
475 CAYUGA RD #100
CHEEKTOWAGA, NY 14225-1309
P/N: R100-084-000
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
ALUMINUM 1
0651049FULL -
ENCLOSURE LID
1.187 [30.15]
2.070 [52.58]
3.000 [76.20]
3.500 [88.90]
4.875 [123.83]
6.30 [160.0]
REF
.531 [13.49]
.531 [13.49]
1.000 [25.40]
3.14 [79.7]
REF
.363 [9.23]
.80 [20.3]
REF
.531 [13.49].531 [13.49]
2.275 [57.78]1.750 [44.45]
4X 1/8 (.125) DRILL THRU
1.125 [28.58] THRU
1/4 (.250) DRILL THRU
"N" (.302) DRILL THRU
15/32 (.468) DRILL THRU
4X #8-32 UNC-2B .25 [6.4]
2X #8-32 UNC-2B THRU ONE SIDE
5.45 [138.4]
REF
1.54 [39.1]
REF
.931 [23.65]
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
ATTACHMENT BAR
0651057FULL -
6.5 [165]
3.25 [82.6]
.75 [19.1]
1-1/2 (1.500)
STOCK
3/4 (.750)
STOCK
4X .13 [3.2] X 45° CHAM
33/64 (.515) DRILL THRU
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
4 REMOVE PART PER INDICATED DIMENSION.
5 SUGGESTED SOURCE OF SUPPLY:
McMASTER CARR SUPPLY COMPANY
P.O. BOX 740100
ATLANTA, GA 30374-0100
P/N: 61135K15
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
B
ATTACHMENT KNOB
0651058FULL -
KNOB, FOUR ARM,
ALUMINUM, SOLID HUB
1/2-13 UNC-2B THRU
5/8 (.625)
REF
1-1/4 (1.250)
REF
3 [76]
REF
1/4 (.250)
5/8 (.625)
R.03 [0.8]
GREASE, DOW CORNING 4, TRANSLUCENT
WHITE
A/R1204K12 6
O-RING, EPDM, BLACK, AS568A-044,
3-3/4 (3.750) ID X 3-7/8 (3.875) OD
19557K135 5
HELICAL INSERT, SST,
#6-32 UNC X .276 [7.01] LONG
491732A707 4
SCREW, HEX WASHER HEAD, SLOTTED, SST,
#8-32 UNC X 3/4 (.750) LONG
290316A197 3
MOUNTING BLOCK10651064C2
ENCLOSURE10651063D1
NOTES:
1. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
2. (.XXX) = DECIMAL EQUIVALENT.
3 SPECIAL TOOLS ARE REQUIRED FOR INSTALLING HELICAL
INSERTS, ITEM 4 . SEE NOTE 5.
4 LUBRICATE O-RING, ITEM 5 WITH GREASE, ITEM 6
AND THEN PRESS INTO GROOVE OF ENCLOSURE,
ITEM 1 .
5 SUGGESTED SOURCE OF SUPPLY:
McMASTER CARR SUPPLY COMPANY
P.O. BOX 740100
ATLANTA, GA 30374 -0100
P/N: 9557K135; 1204K12; 91732A707; 90316A197
90261A152 (INSTALLATION TOOL)
92955A105 (TANG BREAK-OFF TOOL)
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
D
ENCLOSURE SUB-ASSEMBLY
06510622X -
REF
REF
5 6
4 PLCS
REF
REF
REF
DETAIL A
SCALE 8 : 1
NOTES:
1. REMOVE ALL BURRS AND SHARP EDGES.
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
D
ENCLOSURE
ACETEL (DELRIN) BLACK 1
06510632X -
SEE DETAIL A
R.25 [6.4]
ALL AROUND
2X #15 (.180) DRILL THRU ONE SIDE
7/16 (.437) DRILL THRU ONE SIDE
"V" (.377) DRILL THRU
R.13 [3.2]4X
R.13 [3.2]
ALL AROUND
5/32 (.156) DRILL .09 [2.3]
FROM INSIDE OF BOX
.063 [1.59]
.050 [1.27]
R.031 [.79]
.19 [4.8] 5.000 [127.00]
1.56 [39.7]
1.750 [44.45]
4X R.56 [14.3]
4X R.50 [12.7]
O-RING GROOVE ALL AROUND
SEE DETAIL A
.19 [4.8]
.75 [19.1]
.56 [14.3] .75 [19.1]
1.69 [42.8]
.75 [19.1]
.56 [14.3]
5/32 (.156) DRILL .09 [2.3]
FROM INSIDE OF BOX
"V" (.377) DRILL THRU 1.06 [27.0] 1.06 [27.0]
2.69 [68.2]
1.375 [34.93] 1.375 [34.93]
5.38 [136.5]
2.13 [54.0]
.06 [1.6]
4X #26 (.147) DRILL .56 [14.2]
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
MOUNTING BLOCK
ACETEL (DELRIN), BLACK 1
06510642X -
R1.06 [27.0]
1.25 [31.8]
.38 [9.5]
.75 [19.1]
1.75 [44.5]
3.50 [88.9]
2.750 [69.85].38 [9.5]
2X #8-32 UNC-2B THRU
7/16 (.437) DRILL THRU
.087 [2.21]
SCALE 4 : 1
SILICONE ADHESIVE, DOW CORNING 3140 RTV
COATING
A/R1665341 4
HELICAL INSERT, SST,
#2-56 UNC X .086 [2.18] LONG
491732A203 3
DISPLAY WINDOW10651068B2
FACEPLATE COVER10651067D1
NOTES:
1. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
2 SECURE DISPLAY WINDOW, ITEM 2 , INTO SLOT OF
FRONT PLATE, ITEM 1 , WITH SILICONE ADHESIVE,
ITEM 4 . REMOVE ALL EXCESS SILICONE ADHESIVE.
3 SPECIAL TOOLS ARE REQUIRED FOR INSTALLING HELICAL
INSERTS, ITEM 3 . SEE NOTE 4a.
4 SUGGESTED SOURCE OF SUPPLY:
a) McMASTER CARR SUPPLY COMPANY
P.O. BOX 740100
ATLANTA, GA 30374 -0100
P/N: 91732A203;
90261A140 (INSTALLATION TOOL)
92955A101 (TANG BREAK-OFF TOOL)
b) ELLSWORTH ADHESIVE
W129 N10825 WASHINGTON DR
GERMANTOWN, WI 53022
P/N: 1665341
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
D
06510662X -
FACEPLATE COVER
SUB-ASSEMBLY
4 PLCS
REF
REF
REF
REF
REF 3
REF
REF
REF
3 4 a
4 b
SCALE 4 : 1
NOTES:
1. REMOVE ALL BURRS AND SHARP EDGES.
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
D
FACEPLATE COVER
ACETEL (DELRIN) BLACK 1
06510672X -
.125 [3.18]
.020 [.50]
R.19 [4.8]
1/4 (.250) DRILL THRU
7/16 (.437) .125 [3.18]
4X 9/64 (.140) DRILL THRU
#1 (.228) .140 [3.56]
4X #41 (.096) DRILL .20 [5.1]
5.38 [136.5]
5.000 [127.00]
1.750 [44.45]
.19 [4.8]
2.13 [54.0]
.17 [4.3]
.17 [4.3]
1.03 [26.2]
2.98 [75.6]
2.640 [67.06]
.687 [17.45]
1.06 [27.0]
1.000 [25.40]
1.220 [30.99]
.110 [2.79]
R.063 [1.59]4X
.068 [1.73]
.176 [4.47]
.093 [2.36]
R.063 [1.59]4X
2.826 [71.78]1.06 [27.0]
.54 [13.8]
2.952 [74.98]
.046 [1.17]
2.640 [67.06]
REF
.687 [17.45]
REF
4.31 [109.5]
R.13 [3.2]4X
1/4 (.250)
STOCK
.17 [4.3]
REF
.687 [17.45]
REF
.082 [2.08]
.19 [4.8]
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
B
DISPLAY WINDOW
CLEAR POLYCARBONATE (LEXAN) 1
06510682X -
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
2.80 [71.1]
.98 [24.9]
1/16 (.062)
2. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
3. (.XXX) = DECIMAL EQUIVALENT.
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
C
MOUNTING BRACKET
ALUMINUM, TYPE 6061-T6, 1/16 (.062) 1
06510762X -
3.50 [88.9]
.38 [9.5] 2.750 [69.85]
R1.06 [27.0]
1/16 (.062)
STOCK
1.38 [34.9]
R.06 [1.6]2X
2X 3/16 (.187) DRILL THRU
.75 [19.1]
.38 [9.5]
4X .05 [1.3] X 45° CHAM
| 0651003.pdf |
| 0651004 |
| 0651005 |
| 0651006 |
| 0651007 |
| 0651008 |
| 0651011 |
| 0651013 |
| 0651014 |
| 0651012 |
| 0651015 |
| 0651016 |
| 0651017 |
| 0651018 |
| 0651019 |
| 0651020 |
| 0651023 |
| 0651025 |
| 0651027 |
| 0651029 |
| 0651033 |
| 0651038a |
| 0651038b |
| 0651039 |
| 0651040 |
| 0651041 |
| 0651042 |
| 0651044 |
| 0651047 |
| 0651049 |
| 0651057 |
| 0651058 |
| 0651062 |
| 0651063 |
| 0651064 |
| 0651066 |
| 0651067 |
| 0651068 |
| 0651076 |
File details come from the government source that posted it. Updated .